Used Logs Task for sale (2,947)

Condition: good (used), Sturdy block clamping carriage for horizontal fence or band saw Ffsdpfx Aotqd Nasg Dew Length approx. 9.0 m. Track width 920 mm. 6 clamping blocks. With hydraulic feed. Also suitable for feeding drying kilns etc.

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, The tractor unit and trailer can also be sold separately upon request. Mercedes Arocs 2546 6x4 HAD (Vehicle Number: 11765) L-cab StreamSpace driver’s cab, 2.30 m wide, 170 mm engine tunnel * Driver’s cab suspension, comfort, air-sprung * Rear cab wall without window * External storage compartment flap, left * Exterior sun visor, transparent * Air horn * Rotating beacon * Central locking system * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Reversing camera * Automatic climate control * Residual heat utilization * Additional water heating, cab * Electric stationary air conditioning * Construction site air filter * Storage compartment lids, driver and passenger side * Drawers under bed & under window ledge * Overhead storage compartments above windscreen * Electrically operated tilting roof * Refrigerator, drawer type, under bed ----Electric and electronics: additional 12 V/15 A socket, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, right sidewall storage * Additional functions for bodybuilder * 15-pin trailer socket, 24 V * Reverse warning system ----Safety and assistance systems: Stability control assistant * Anti-roll assistant * Lane keeping assistant * Distance assistant * Attention assistant * Active Brake Assist 4 * Driver airbag * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: OM470, I6, 10.7 L, 335 kW (455 hp), 2200 Nm * Euro VI D engine spec (Truck) * High performance engine brake * Two-cylinder air compressor * Insect protection grille, in front of radiator * Regulated water pump ----Drivetrain: twin-disc clutch * Transmission: G 281-12/14.93-1.0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: leaf/air suspension * Steerable and liftable trailing axle * Drawbar coupling with Doumatik ----Palfinger M10L80 YCrane on 2 LK: * 2 hydraulic outriggers * 4 adjustable timber stanchions (ECCO ALU 4) * Logging seat * Timber grab * Year of manufacture: 2019 Ffjdpfex Tylgsx Ag Djw * Operating hours: 4,459 h * Next inspection: Technical data * Front axle tyre size: 385/65R22.5 * Rear axle tyre size: 315/80R22.5 * Fuel tank: 510 l * AdBlue tank: 60 l * Permissible gross weight: 26,000 kg * Curb weight: 13,630 kg * Permissible towing capacity: 35,000 kg * Overall length: 10,200 mm * Safety inspection due: 05/2026 -----Janzen System T19 tandem timber trailer (Vehicle Number: 11676) * 4 adjustable stanchions ECCO ALU 4 * Wabco SmartBoard * SAF axles with disc brakes * First registration: 01.11.2019 * Total length: 7,650 mm * Perm./tech. gross weight: 18,000/19,000 kg * Curb weight: 2,950 kg * Tyre size: 385/65R22.5 * MOT: 11/2026 * Safety inspection: Vehicle number: 11675+1167----Subject to errors and prior sale----Advertising and lettering have been digitally removed.----We are happy to assist you with all necessary formalities involved in the purchase of a vehicle. Simply let us know your requirements and suggestions and we will take care of the rest. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/safety inspections * Complete export processing * Arrangement of financing * Application for export number plates * Vehicle transfer * Vehicle registration * Vehicle recovery and transport ----YOUR VTS TEAM

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Cab L-cab StreamSpace, 2.30 m, 170 mm tunnel * Cab suspension, comfort, air-sprung * Cab rear wall, without window * External storage compartment door, left * Exterior sun visor, transparent * Air horn * Beacon * Central locking system * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Reversing camera * Automatic climate control * Residual heat utilization * Hot water auxiliary heater, cab * Electric stationary air conditioning system * Construction site filter * Storage compartment covers, driver and passenger side * Drawers, under bed & under sill * Storage compartment flaps, above windscreen * Electric sunroof * Refrigerator, in drawer, under bed ----Electrics & electronics Additional 12 V/15 A socket in passenger footwell * Power socket 24 V/25 A in passenger footwell * Socket 24 V/15 A in right sidewall storage * Additional functions for bodybuilder * Trailer socket 24 V, 15-pin * Reversing warning system ----Safety and assistance systems Stability control assistant * Anti-roll control assistant * Lane keeping assistant * Distance control assistant * Attention assistant * Active Brake Assist 4 * Driver airbag * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine OM470, inline 6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High performance engine brake * Air compressor, 2-cylinder * Insect protection mesh, in front of cooling system * Regulated water pump ----Powertrain Twin-plate clutch * Transmission G 281-12/14.93-1.0 * Hydraulic Auxiliary Drive (HAD) ----Chassis Leaf/air suspension * Steerable & liftable trailing axle Fsdsx Tnitspfx Ag Dofw * Drawbar trailer coupling with Doumatik ----Palfinger M10L80 YCrane_on_2 LK: * 2 hydraulic outriggers * 4 adjustable timber bolsters (ECCO ALU 4) * Elevated seat * Wood grapple * Year of manufacture: 2019 * Operating hours: 4,459 hrs * Next inspection: * Tire size front axle: 385/65R22.5 * Tire size rear axle: 315/80R22.5 * Fuel tank: 510 L * AdBlue tank: 60 L * Gross vehicle weight rating: 26,000 kg * Tare weight: 13,630 kg * Perm. trailer load: 35,000 kg * Overall length: 10,200 mm * Safety inspection valid until: 05/2026 ----Vehicle number: 11675----Subject to errors and prior sale----Advertising and various decals digitally removed.----We are happy to assist you with all paperwork involved in purchasing a vehicle. Simply let us know your requirements and suggestions and we’ll take care of the rest. Among other things, we can offer you the following services for an additional fee:----* Trade-in of your old vehicle * TÜV/safety inspection * Complete export processing * Arrangement of financing * Application for export license plates * Transfer of vehicles * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) Ffsdpfx Aowlfdxog Dsw • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: used, mileage: 252,891 km, power: 375 kW (509.86 HP), first registration: 09/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Hydrodrive VA, NA steered and liftable, active roll stabilization, axle load scale for HA+ trailer, parking brake on the VA, display for trailer data, radio, MAN telematics, battery main switch, 12/24 sockets, LGS IV, 1 fire extinguisher 2 kg, LED daytime running light, snow chain holder, RIO box, radio MAN Media 7" color display and Navi-SD Europe entire, hands-free for 2 mobile phones, AUX-in/USB, Alucar short wood structure with 4 external bolsters, 6850 mm loading length, Epsilon M12ZMaster 91 crane with Masterdrive, control 4+2 hydraulically piloted, double extension 9.10 m range, wide support RX 47 (4.70m), bio oil, tool box, snow chain holder, 4 x LED headlights, Fedpsuci Acefx Ag Dsfw

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Ffjdeikvlispfx Ag Dow Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: used, maximum load weight: 33,960 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, 8 pairs of ALU stanchions / steel stools Exte D7 8 pairs of ALU stanchions and steel stool structure EXTE D7 Ffedpfx Asn Ryfaeg Dew

Condition: used, maximum load weight: 17,450 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, Equipment: ABS, Type Sierra, underrun protection steel, plastic mudguards, continuous aluminum frame cover, manual mechanical support (5t support load), drum brakes, 2 LED work lights, chassis structure, 4 x Doll steel bolster type Mammut, 8 x Doll square fixed stakes 2550mm, loading lengths: 2 x 2000 mm/2500 mm/3000 mm or 1 x 4000 mm/5000 mm/6000 mm, 50 mm towing eye. Fsdjxc R Unopfx Ag Dofw

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Fsdpfx Ajv Hwk Ujg Dsfw Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: new, functionality: fully functional, maximum load weight: 3,000 kg, lifting power: 3,000 kg/m, Year of construction: 2025, Wood grapple for various forestry machines, farm loaders, wheel loaders, loaders, and other carrier vehicles (e.g.: H&R, JCB, Liebherr, Bobcat, Case, Kubota, Manitou, Schäffer, Zeppelin, etc.) The grapple has an opening width of approx. 1.2m. Ffjdpfovygigsx Ag Dow The rotator allows trunks to be rotated so that they can be picked up or put down precisely. The inclination is adjusted hydraulically so that it can be easily adjusted. Various mounting options are also available, e.g. Euro mounting, H&R standard mounting, etc. Individual adjustment is also possible. Other accessories for forestry machines, wheel loaders, etc. are also available from us. Please contact one of our trained consultants to receive an offer tailored to your needs. We look forward to hearing from you! Your H&R GmbH

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm Fsdpjt Hf T Hsfx Ag Djfw pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 1,160 kg, total width: 1,600 mm, total length: 4,150 mm, total height: 2,800 mm, We are selling a log splitter in very good condition, ideal for efficient and comfortable firewood splitting. Condition: used, fully functional, year of manufacture: 31.08.2022, with road approval. Technical data: 7 t splitting force, max. log diameter: 36 cm, max. split length: 60 cm, 4-way frame splitting wedge, 4.2 m conveyor belt, swiveling, adjustable conveyor belt speed, including oil cooler, Japa 365 log lifter, hydraulic feed roller. Price negotiable. Viewing by appointment possible. Fedpfx Aoykuwdog Defw

Condition: used, maximum load weight: 14,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2014, next inspection (TÜV): 08/2023, loading space length: 6,800 mm, loading space width: 2,300 mm, Equipment: ABS, * ABS * BPW ECO-Plus axles * 5-chamber rear lights * Duomatic air connection ----Construction: Doll short wood construction with 4 Doll Mammut pairs of stanchions. Ffjdpfx Aok Afi Reg Dow Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, mileage: 628,277 km, power: 390 kW (530.25 HP), first registration: 10/2018, fuel type: diesel, axle configuration: 3 axles, color: black, gearing type: mechanical, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, FAT XF 530 SSC DEEP BLACK (46185) Riedler stake body Penz timber crane 15Z9.50 H1/B4 Grapple with chainsaw Central locking Electrical connection for trailer, 24 V/15-pin Rear axle 1: 315/80R22.5 Front mirror Automatic idle shutdown, 5 minutes Rear: 2 x 13.00 t, air suspension, SR1360T Parking heater with waste heat pump and timer Basic immobilizer Traction control (ASR) Rear suspension 26.0 t / Brakes 26.0 t Rear axle 2: 315/80R22.5g Spring-actuated brake chamber, first front axle Drive rear axle with disc brakes Interior trim color: Dark Sand Cab interior finishing: Piano Black Passenger seat: Basic Luxury sound system with 6 speakers Steel air tanks Adaptive cruise control with FCW and AEBS Electronic Stability Control (VSC) Driver’s seat armrest Glass sunroof, electric operation Lane departure warning system Electric windows Pollen filter Mechanical differential lock LED daytime running lights Universal FMS connector Driver Performance Assistant Upper sleeper bunk Exterior sun visor, green transparent Air-suspended cab MX-13 engine, 390 kW / 530 hp Cab emblem: 530 Reverse warning system Cab - Super Space Cab MX engine brake and ZF Intarder Auxiliary power supply: 12V/20A, 24V/2x15A + 2x40A Rear axle ratio 3.40 LED headlights LED rear lights Front axle 1: 385/65R22.5 16-speed manual transmission 16S25.. OD, 13.80-0.84 Emission class Euro 6 Front: 9.00 t, parabolic, standard, 183N Second transmission PTO NL/1b-Z Wheelbase 5.55 m / rear overhang 3.75 m Spring brake chamber on rear axle 1 & 2 First transmission PTO N.../10c-O-37/30 Cool box or refrigerator Skylights Xtra Comfort mattress, lower bunk Automatic cab climate control AdBlue tank 75 liters, left chassis side Truck phone ECAS remote control with extended functions Navigation preparation Driver’s seat: Luxury Air Analog superstructure signals and warnings Front axle 1, 9000 kg, load index 160 Fsdpsxc R S Hsfx Ag Defw Axle load monitoring Steering wheel, leather, color black CAN J1939 functions in the body interface Lower sleeper bunk with 65-liter drawer Antennas: AM/FM, 2x GSM, GPS. Extra: CB Fog lights and cornering/turning lights R1, 315/80R22.5 R2, 315/80R22.5 SP, 315/80R22.5 F1, 385/65R22.5 Tank 750 L, left 2 rotating beacons on light bar 4 Hella roof spotlights Bycool compressor parking cooler, rear-mounted Light-Fix bar SSC E6 Switch in cab for constant power to truck reverse light Steering axle lock switch (trailer) Lift axle switch (trailer) Compressed air gun with cab mounting CB radio, 40 channel XXL storage table XF Euro6 Marlen

Condition: good (used), functionality: fully functional, Year of construction: 1916, Binderberger horizontal log splitter 30 t Fedpfxsyglm Uj Ag Dofw

Condition: used, axle configuration: 3 axles, first registration: 07/2015, Equipment: ABS,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, control type: CNC control, controller manufacturer: TASK, controller model: DBM3, working width: 1,300 mm, input voltage: 380 V, input frequency: 50 Hz, oil tank capacity: 40 l, overall weight: 2,000 kg, total length: 1,400 mm, total width: 1,400 mm, total height: 1,500 mm, year of last overhaul: 2026, Equipment: documentation/manual, PRESS BRAKE SCHIAVI - AMADA RG 25-12 DBM3 TASK. Ffsdpfx Agoygvf Uo Dow PRESS FORCE: 25 TON TABLE LENGTH: 1300 MM DBM3 TASK 3-AXIS CNC CONTROL. OPERATIONAL AND CONNECTED FOR BENDING TESTS. COMPLETE WITH UPPER AND LOWER DIES.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: TASK, controller model: MASTER 3AX, bending force (max.): 35 t, working width: 2,000 mm, stroke length: 100 mm, throat depth: 400 mm, distance between stands: 1,800 mm, oil tank capacity: 50 l, travel distance X-axis: 600 mm, back gauge: 600 mm, overall weight: 3,500 kg, total length: 2,700 mm, total width: 1,700 mm, total height: 2,200 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: lower tooling, upper tooling, Press brake SCHIAVI - AMADA RG 35-20 Ffjdpfxsygu Uhe Ag Djw Press force: 35 tons Table: 2000 mm Complete with upper and lower dies Fully functional with 4-point motorized backgauges CE-certified machine with rear safety enclosure Operating video available.

Year of construction: 2021, condition: new, Wravor WRC 1050 max.cutting length 6,5m We are also happy to configure a new log band saw according to your wishes. Fjdpogyw R Sefx Ag Djfw

Condition: excellent (used), functionality: fully functional, mileage: 520,000 km, power: 425 kW (577.84 HP), first registration: 12/2017, fuel type: diesel, empty load weight: 10,500 kg, tire size: 315/80/22.5, tire condition: 50 %, axle configuration: 6x4, wheelbase: 4,900 mm, next inspection (TÜV): 12/2026, fuel: diesel, fuel tank capacity: 600 l, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, suspension: air, number of seats: 2, Year of construction: 2017, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, airbag, car registration, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, non-smoking vehicle, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, traction control, trailer coupling, truck registration, 1st hand, top-maintained, Doll superstructure, aluminium floor, platform 6.40m, Epsilon 120/96 crane, crane base with column renewed 2 years ago, engine fully overhauled – sleeves, pistons, new clutch, air-air suspension, hot water heating, stationary air conditioning, maintenance contract with Mercedes until 2024. For any questions, contact Tilo Meissner. Fedpfx Agsydn Ipo Dsfw

Condition: used, mileage: 207,405 km, power: 375 kW (509.86 HP), first registration: 03/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Safety package Light and Visibility Plus, Eco Cool retarder, MAN Easy Start anti-roll bar, LED lighting, transmission function free-swinging, differential lock in HA, high beam assistant, automatic headlight switching with light sensor, 2x rotating beacons, front rear view camera, 2kg fire extinguisher, MAN AttentionGuard, navigation system with map for Europe and Russia, MAN Advanced sound system with subwoofer, ROCKINGER GSS Plateau trailer with 8 x ExTe stanchions with Palinger crane Epsilon M12Z91 crane with classic high seat, MAN sound system with subwoofer. Russia, MAN Advanced sound system with subwoofer, ROCKINGER GSS plateau trailer with 8 x ExTe stanchions with Palinger Epsilon M12Z91 crane with classic high seat, 4+2 hydraulic pilot control, Bio ÖL, double extension 9.10 m reach, YFG53 Epsilon timber grab 0.50 m² load capacity: 3510 kg Fedpsurd Nqsfx Ag Dofw

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 113 kg, total width: 840 mm, total length: 1,620 mm, total height: 920 mm, fuel: super 95, fuel tank capacity: 3 l, Equipment: trailer coupling, The HS12288 log splitter from HZC Power impresses with a splitting force of 12 tons and a maximum splitting length of 530 mm. The 6.5 hp petrol engine ensures sufficient power and efficient work, while the splitting cycle of just 11 seconds guarantees fast wood processing. The device works in a horizontal position and is equipped with a fixed splitting wedge/splitting cross, which presses the wood against the wedge via the cylinder. The two-handed operation ensures additional safety. The log splitter is easy to transport thanks to the trailer coupling. General data: Manufacturer: HZC Power Model: HS12288 Splitting force: 12 t Maximum splitting length: 530 mm Splitting cycle: 11 s Oil pressure: 270 bar Hydraulic oil capacity: 10 l (HLP46) Product weight: 113 kg Shipping weight: 140 kg Dimensions assembled (LxWxH): 162 cm x 84 cm x 92 cm Dimensions with packaging (LxWxH): 110 cm x 54 cm x 80 cm Special features: Splitting wedge: 15 cm x 20 cm (LxW) Trailer coupling: For easy transportation Working position: Horizontal Operation: 2-hand safety control Splitting wedge/splitting cross: Permanently mounted, wood is pressed against the splitting wedge via the cylinder Motor: Manufacturer: Jiao Model: 6.5 HP / 208 cc Engine technology: Single-cylinder, 4-stroke, air-cooled, OHV (overhead valves) Displacement: 208 cc Cylinder: Cylinder with cast iron sleeve Bore: 68.3 mm Stroke: 55.9 mm Fuel tank capacity: 3.1 l Fedpfxowalute Ag Defw Oil capacity: 0.6 l Engine weight: 16 kg Dimensions (WxLxH): 321 x 376 x 346 mm These details summarize the most important technical specifications and equipment features of the HS12288 log splitter from HZC Power. Splitting force: 12 t - For effortless splitting of wood up to 530 mm in length and a maximum diameter of 50 cm. Cable starter: Easy engine start, even in cold temperatures. Splitting wedge/splitting cross: Permanently mounted, ensures effective splitting without constant readjustment. Hydraulic system: Powerful system with 270 bar oil pressure, ensures high efficiency and durability. Working position: Horizontal - allows you to work comfortably while lying down. Two-hand operation: For maximum safety when operating the log splitter. Oil filter: Integrated oil filter for a longer service life of the appliance. Trailer coupling: For easy transportation on private land, but without road approval. Robust frame: Sturdy frame ensures that the split material is held securely during the splitting process. Compact dimensions: With a width of 84 cm, the splitter can be easily transported on a trailer. Engine: 6.5 hp petrol engine with 208 cc displacement for powerful splitting. Integrated table surface: Provides additional space for storing pieces of wood while working.

Condition: new, machine/vehicle number: f044065451f6d849ee7a5b9f8, empty load weight: 5 kg, maximum load weight: 29 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 385 / 65 r 22,5, Further information Chassis semi-trailer forwarding Welded steel construction in reinforced design, only 2 side members as double T-beams with steel/checker plate between the side members, saddle plate with replaceable 2 kingpins. Protective plate for rear lights. 1 steel storage box, recessed between side members 8 pairs of lashing eyes bolted or welded to the frame at the manufacturer's choice 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EC 1 spare wheel holder for 1 e-wheel, with wheel fastening set 8 wooden stanchions of the manufacturer's choice, bolted to frame with 2 wooden stanchions each, telescopic from 1800 to 2800 mm, per pair 7 to. Axles + suspension SAF disk brake axles with 430 mm disk diameter Air suspension with lifting & lowering valve, safety cable on the axles 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle spacing offset mm (combined transport) up to 44 tons gross train weight Wheels and tires 385 / 65 R 22,5 at the manufacturer's discretion Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Ffjdpoi Rivwofx Ag Dew 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Front bulkhead/front stanchions Steel/grid bulkhead, approx. 2,300 mm high, bolted to the frame Approval / plates Country of approval: Germany Approval according to EC 2007/46 Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Black coated support legs Front wall hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: 057736dac221bda3fc469966a, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grained steel welded construction Slightly sloping outer frame with Load-Lock profile for attaching tension beltsNote! To attach the belts in conjunction with drop sides, the drop sides must be opened! Front gear support leg Folding rear support 2 wheel chocks with holder Galvanized steel underride guard Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 open storage compartment for stanchions, underneath loading area 4 pairs of stanchion pockets embedded in the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centrally recessed in the floor, with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of stanchions W=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Tandem trailer drawbar Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length by 4 x 500 mm from 1800 - 3800 mm, drawbar length set to 1800 mm, (Note! Observe load distribution and drawbar load) Axles + suspension GFA axles with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Screen printing plates approx. 30 mm thick, for high point load capacity Note: Floor warping due to weather influences possible! Platform length approx. 6,200 mm Fsdpei Ri H Dofx Ag Djfw Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Approval / plates Country of registration: Germany With Dekra approval and expert opinion 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Attention: Archive pictures!

Condition: used, empty load weight: 5,520 kg, maximum load weight: 32,480 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 08/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller timber trailer 3-axle | SAF axles with disc brakes | Unladen weight 5,520 kg | Payload: 32,480 kg | Lift axle | Tyres: 385/65 R22.5 | 10 pairs of stakes | Subject to error, input mistakes and prior sale. Fjdpfx Asx S N Ubjg Dsfw