Used Leveler for sale (5,356)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts Iajdexmhdnspfx Ag Usl - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E11SI17062595708, This listing is for a Rational SCC 101 WE combi steamer in electric version, from the premium manufacturer Rational. The unit comes from the SCC series, featuring triple glazing and LED lighting. The combi steamer has been inspected in our in-house workshop and is fully functional. The underframe shown in the pictures is not included in the offer, but can be purchased separately as an option. RRP: €12,920 net. You will receive an invoice with VAT shown separately. Service: We are happy to assist with arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Feel free to ask—we have access to an extensive range of new and used equipment. We are happy to advise you on all appliance types. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, excluding installation and removal costs - High-quality branded equipment at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully functional - or your money back - Flexible shipping or self-collection options - Competent advice – before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - DGUV V3 safety inspection This combi steamer accommodates 10 x 1/1 GN containers. In automatic mode, the unit independently detects the ideal cooking path, product size, load quantity, and product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: - WxDxH: approx. 847 x 776 x 1042 mm - Minimum door opening for delivery WxH: 845 x 1050 mm - Power connection: 400 V / 18.6 kW / 50-60 Hz - Capacity: 10 x 1/1 GN - Weight: approx. 132 kg - Serial number: E11SI17062595708 - Year of manufacture: 2017 Condition: used, fully operational Additional features: - 3 operating modes in combi-steamer mode: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) - Care Control - self-cleaning program - Core temperature probe - Hand shower with automatic retraction - 8.5" color display and touchscreen - 5 programmable fan speeds Iaodpfxjx U Snve Ag Ujl - Integrated, maintenance-free grease separation system - Automatic start time preselection - 7 cleaning levels for unattended cleaning – including overnight cleaning - 3-stage steam injection, adjustable from 30°C to 260°C - 5 programmable fermentation levels - USB interface - Seamless, hygienic cooking chamber with rounded corners - Halogen cooking chamber lighting Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by prior arrangement Subject to change and error. Do you have questions, need advice, or would like to view the equipment on-site? You can reach us by phone during our business hours: Monday to Friday, 9:00–13:00 and 14:00–17:00. Sales are made exclusively according to our general terms and conditions (GTC).

Year of construction: 2023, operating hours: 50 h, condition: ready for operation (used), overall weight: 2,000 kg, total height: 2,500 mm, number of axes: 6, This 6-axis WU Automation RZ-3/35 was manufactured in 2023. A versatile robot cell with a compact design, it features a 6-axis robot capable of handling up to 35 kg. It includes an intuitive graphical interface, Schunk NSR 100 and JGP 125 gripper systems, and a safety package with movable safety fence. Ideal for efficient, flexible operations with minimal setup times. Compatible with all Hermle machines. If you are looking to get high-quality automation capabilities consider the WU Automation RZ-3/35 machine we have for sale. Contact us for more information. Additional equipment • Vice Pallets: 18 • Safety Package: Movable safety fence and safety software • Shelving System: Adjustable levels for up to 18 pallet spaces • Valve Terminal: For controlling external elements Machine Benefits Technical Machine Benefits • User-friendly operation: intuitive, graphical interface for fast operation • Short setup times: quick changeovers, even for small series • Optimal access: flexibly positioned for easy access and flexibility • Compact design: small footprint with integrated components • High flexibility: easy transport and relocation, connection to other machines • Easy retrofitting: standardized interfaces for external functions • Modular system: adaptable with various gripping and feeding systems • Installation area (lxwxh): 1700 mm x 1300 mm x 2200 mm • Max reach: 1810 mm • Transfer weight: up to 35 kg Extra Information Gripper Systems: Iedpfox D E Ncex Ag Ujal 1x Schunk NSR 100 gripper system 1x JGP 125 gripper system 2x parallel grippers 2x compensation units 2x gripper jaw sets Compatible with all Hermle machines Front loading Dimensions Machine Depth 1900 mm

Condition: used, mileage: 569,013 km, first registration: 10/2022, fuel type: diesel, number of seats: 81, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = - Retarder - Toilet - USB connections - Webasto (auxiliary heating system) = Further Information = Height: 400 cm Damage: none Sale price: 399,900 = Company Information = Isdpox T A R Esfx Ag Ueal We are an international company based in Belgium, located in the Brussels area (approx. 20 km away). Belgian Bus Sales is your ideal partner for buying and selling used buses, and features a large parking area that serves as a display lot. We always have a wide range of buses in stock—from all brands, capacities, models, and at every price level. We can find the right coach, school, or city bus to suit your needs and budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the advanced safety and performance test package “P Plus”. This device is not a standard laboratory incubator but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Key Added Value: The unit is designed to reliably detect, monitor, and contain critical battery events safely—including up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the device do specifically? (Section 2 – Performance & Application) – Conduct aging tests on lithium-ion cells – Performance tests (charge/discharge cycles under temperature) – Continuous temperature runs and thermal cycling tests – Testing of non-energized and cyclically energized cells – Reproducible, precise temperature control throughout the entire usable space – Safe execution of tests under realistic thermal conditions – Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: – Battery & cell manufacturers – Research and development laboratories – Test laboratories & safety testing – Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: – Automatic & manual CO₂ fire suppression system – Smoke detector with optical & acoustic alarm – Mechanical double door locking (secure containment) – Spark protection in the interior compartment – Exhaust connection with reversible overpressure flap – Connections for external inerting (e.g., nitrogen) – Emergency stop / manual release of extinguishing system – Ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur, but not explosion or uncontrolled propagation. This is not an abuse or destruction test device, but a secure, standard-compliant test chamber for real-world operating and fault scenarios. Technical Core Data: – Temperature range: –5 °C to +100 °C – Interior volume: approx. 698 liters – Shelves: 4 × stainless steel – Max. load per shelf: 45 kg – Max. total load: 100 kg Electrical Data: – Mains connection: 200–240 V AC – Frequency: 50/60 Hz – Phases: single-phase Iajdex Sc Inspfx Ag Uel – Power consumption: approx. 2.1 kW – Circuit protection: 16 A – Refrigerant: R134a – Protection class: IP 20 Dimensions & Weight: – External (W × H × D): approx. 1250 × 1950 × 900 mm – Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? – Genuine battery safety test chamber – Suitable for EUCAR Hazard Level 5 – Integrated CO₂ extinguishing system – Large chamber (≈700 l) – High market value & resale attractiveness – Weight: approx. 285–300 kg – Condition: used – Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, we are happy to answer your call.

Condition: excellent (used), functionality: fully functional, Max. air flow rate: 800 m³/h Max. negative pressure: 1,800 Pa Suction connection: 150 mm Iodpoyaadbsfx Ag Usal Suction connection height: 300 mm Drive power: 1.10 kW Connection voltage: 220 / 380 volts (4.33 / 2.5 amps) Dimensions (L/W/H): 610 x 740 x 1,150 mm Total depth: 670 V Sound pressure level: 72 dB(A) Weight: 70 kg • Includes flexible suction arm • Suitable for almost all types of dust • Cleanable, durable bag filter

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank Iaedsqa Txqspfx Ag Uol - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Year of construction: 2013, condition: used, This listing is for a SCC 61 combi-steamer from premium manufacturer Rational, in electric configuration. The combi-steamer comes equipped with a hanging rack featuring 6 slots. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. It is offered with a 6-month warranty covering all electrical components. The base stand shown in the pictures is not included in the offer but can be purchased optionally. You will receive an invoice with VAT shown separately. Service: We are happy to assist you in arranging contact with a certified Rational service provider. Looking for a specific Rational appliance? Contact us – we have access to an extensive assortment of used and new equipment. We are pleased to advise on all model types, including SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service includes: • 6-month warranty on electrical components, limited to replacement of defective parts, excluding installation/removal costs • High-quality branded units at fair prices • Professional overhaul/inspection & expert cleaning • Inspected & fully functional – or your money back • Flexible shipping or self-collection options • Competent advice – before and after your purchase • Provision of user manuals, wiring diagrams & spare parts • Safety testing in accordance with DGUV V3 This combi-steamer accommodates 6 x 1/1 GN trays. In automatic mode, the unit independently recognizes the optimal cooking process, portion size, load volume, and product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: • W x D x H: approx. 847 x 776 x 782 mm • Power connection: V: 400 / kW: 11.0 / Hz: 50/60 • Capacity: 6 x 1/1 GN • Weight: approx. 103 kg • Serial number: E61SH13062355386 • Year of manufacture: 2013 Condition: used, fully overhauled, fully functional Further features: • With CareControl – self-cleaning system • 3 operating modes in combi-steamer mode: steam (30°C to 130°C), convection (30°C to 300°C), and combination (30°C to 300°C) • Core temperature probe • Retractable hand shower • 8.5-inch color display with touchscreen • 5 programmable fan speeds • Integrated, maintenance-free grease separation system • Automatic start time preselection • 7 cleaning levels for unattended cleaning – including overnight • Adjustable steam level in 3 stages – from 30°C to 260°C • 5 programmable proofing stages • USB interface • Seamless, hygienic cooking chamber with rounded corners • Halogen chamber lighting Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Isdpfx Aex Uzcijg Usal Subject to changes and errors. Do you have questions, need advice, or want to view something on site? You can reach us by telephone during our business hours: Monday to Friday, 9:00 – 13:00 and 14:00 – 17:00. Sales are subject exclusively to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2025, operating hours: 7 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 4-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. Iedpfxox U Dxms Ag Usal • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) • Milling/Main Spindle: • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower • Automatic Bar Feeder: 1 meter (included) • Bar Feeder Interface Package • Parts Conveyor with Belt • Part Ejection from Sub Spindle

Condition: new, functionality: fully functional, Year of construction: 2025, power: 3.1 kW (4.21 HP), load capacity: 230 kg, lifting height: 5,600 mm, lifting power: 230 kg/m, platform length: 1,370 mm, platform width: 700 mm, overall weight: 1,300 kg, transport length: 1,520 mm, transport width: 810 mm, transport height: 1,720 mm, construction height: 2,080 mm, fuel type: electric, tire size: 305 × 100 mm (non-marking), tire condition: 100 %, wheelbase: 1,150 mm, ground clearance: 70 mm, color: red, Equipment: UVV, === KEY SPECIFICATIONS === Year: 2025 Operating hours: 0 (new) Machine width: 0.81 m Drive system: 2-wheel steering Drivable at full height: Yes Platform extension: Yes (0.60 m) Power: 2 × 0.45 kW drive motors + 2.2 kW lift motor Working height: 7.6 m Platform capacity: 230 kg (113 kg on extension) Power type: Electric (24V battery / 115Ah) Battery type: Lead-acid Self-levelling outriggers: No Platform size (L × W): 1.37 × 0.70 m (+ 0.60 m extension) Tyres: Non-marking CE certification: Yes Weight: 1,300 kg Indoor / Outdoor use: Both === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and complete documentation included Ready for immediate transport and operation Comprehensive technical documentation available Iedpfx Agexb Sz He Ueal === CONDITION === Brand new machine – model year 2025, 0 operating hours. Clean, factory-original condition with full warranty. Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price on request (EXW / excluding VAT). The Magni ES 0807 AC is a compact electric scissor lift with a working height of 7.6 metres and a platform capacity of 230 kg. Designed for both indoor and outdoor use, it offers emission-free and silent operation. Equipped with non-marking tyres, a 0.6-metre extendable platform, and the ability to drive at full height. Ideal for maintenance, installation and construction applications. All machines are CE-certified, fully tested and ready for immediate use. Spare parts and technical support available upon request. === DELIVERY === Crane loading available on request for smooth handling during dispatch. Flexible delivery options tailored to your destination and logistics preferences. All shipments are professionally managed by the Collé Rental & Sales logistics team.

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, You can find all further data in the attachment. Machine complete with high-pressure unit and bar feeder. Hardly used; being sold from high-end medical technology production. Purchase price for machine + full-option peripherals: €382,036.86 (all original invoices available). Technical Data SV-20R Total number of axes: 12 Max. rapid traverse speed: 30 m/min Weight: 4,150 kg Coolant tank capacity: 220 liters Dimensions (L x W x H): approx. 2,730 x 1,350 x 1,865 mm Main Side Number of axes: 6 Main spindle axes (spindle head): Z1 / C1 Linear slide axes: X1 / Y1 Turret axes: B3 / X3 / Y3 / Z3 B-axis on turret: freely programmable Max. machining diameter: 20 mm / 23 mm (optional) Max. spindle head stroke (sliding/headstock turning): 205 mm / 50 mm Max. drive power main spindle: 5.5 kW Max. main spindle speed: 10,000 rpm Linear Slide Tools Turning tools: 7 pcs (□ 12 mm) Cross machining tools: 5 pcs (ER16) Max. drive power cross machining: 2.2 kW Max. cross machining speed: 8,000 rpm Turret Tools Number of tool stations: 8 pcs (all driven) B-axis: 4 stations Max. drive power cross machining: 4.0 kW Max. cross machining speed: 5,750 rpm Back Side Number of axes: 4 Sub spindle axes: X2 / Z2 / C2 Vertical axis for back machining: Y2 Iasdpfx Aeyacvyjg Uel Max. gripping diameter: 20 mm / 23 mm (optional) Max. sub spindle drive power: 3.7 kW Max. sub spindle speed: 8,000 rpm Back Machining Tools Tool stations: 8 pcs (all driven) Max. back machining speed: 8,000 rpm Standard Equipment FANUC 31i-B5 control with manual pulse generator C-axis control on main and sub spindle Synchronously driven guide bush unit 7-position turning tool holder on linear slide 5 + α driven tools for cross machining on linear slide 8 + α tools for turning, drilling, cross machining on the turret 4 programmable turret stations for B-axis machining 8 + α tools incl. drill sleeves for driven back machining Sub spindle for back machining Air blow-out device for sub spindle Workpiece collection tray Pneumatic system with maintenance unit Sub spindle part ejection monitoring Workpiece conveyor for unloading workpieces Central lubrication Separate coolant tank with level and flow monitoring Interface for bar feeder magazine Leveling pads and adjusting screws

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Iodpfxeyaabye Ag Ujal Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine Iaodpfx Agjh Hvk Ae Uol - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, machine/vehicle number: YS2R6X2000205xxxx, mileage: 669,167 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 21538 Specifications: 2011 model 669,167 km 480 hp 6x2 Automatic transmission Euro 5 Tires (see pictures) Containers Lift Heated mirrors Air conditioning/ac Light Radio Ready for delivery     Description: We have a 2011 Scania R480 Box truck w/ 2t lift for sale. The car has recently been EU approved and is in regular weekly use. A lift has recently been installed at the rear of the car, which increases its functionality. There is a minor coolant leak from the engine. Therefore, the coolant level should be checked daily before starting. According to the owner, the leak is minimal. Otherwise, the car works as it should. Ready for delivery Km: 669167 HK: 480 Technical approved: Yes EU-approved until: 24.09.2026 Own weight: 10120 Euro: 5 Model: R480 Skapbil m/ 2t lift Gearbox: Automatic Iaodpfx Agjxm Sy Hs Usl

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,941 h, controller manufacturer: FANUC, controller model: n/a, overall weight: 21,000 kg, number of axes: 3, This 4-axis AMADA EMZ 3510 NT was manufactured in 2010. It features a punching capacity of 300 kN and includes 45 turret stations. With a power requirement of 27 kVA and a weight of 21000 kg, this CNC punch press is robust and efficient. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3510 NT machine we have for sale. Contact us for more information about this machine. Additional equipment • Power Required: 27 kVA Iajdpex Hlh Hsfx Ag Usl • Noise Level: 91 dB (A) Machine Benefits Technical Machine Benefits • Stopping distance: 360 mm • Capacity: 300 kn Extra Information Machine still under power

Condition: new, Year of construction: 2024, power: 0.8 kW (1.09 HP), load capacity: 240 kg, lifting height: 3,900 mm, lifting power: 240 kg/m, platform length: 1,150 mm, platform width: 520 mm, overall weight: 460 kg, empty load weight: 460 kg, transport length: 1,310 mm, transport width: 750 mm, transport height: 1,880 mm, construction height: 1,880 mm, tire size: 200 × 50 mm (non-marking), tire condition: 100 %, wheelbase: 990 mm, ground clearance: 80 mm, color: red, Equipment: UVV, === KEY SPECIFICATIONS === Year: 2024 Operating hours: 1 h Machine width: 0.75 m Drive system: 2-wheel steering Drivable at full height: Yes Platform extension: No Power: 0.8 kW (12VDC lift motor) Working height: 5.9 m Platform capacity: 240 kg Power type: Electric Battery type: Lead-acid 12V / 85Ah Self-levelling outriggers: No Platform size (L × W): 1.15 × 0.52 m Tyre type: Non-marking CE certified: Yes Weight: 460 kg Indoor / Outdoor use: Indoor === HIGHLIGHTS === Compact and lightweight scissor lift ideal for indoor use and maintenance work. CE certified and ready for immediate operation. Fully electric with maintenance-free batteries. Easily passes through standard doors. === CONDITION === Brand-new condition, only 1 operating hour. Battery tested and in excellent condition. Available immediately from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Iajdpfxjxct Nue Ag Uol The Magni ES 0607 M is a compact, electric scissor lift with a working height of 5.9 meters and 240 kg capacity. Perfect for indoor applications such as maintenance and installation tasks. Quiet, energy-efficient, and CE-certified — ready for use. === DELIVERY === Crane loading available on request. Flexible delivery options based on destination and logistics preferences. All transport handled professionally by the Collé Rental & Sales logistics team.

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB Iajdsx T Ah Depfx Ag Uel

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,051 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, This 3-axis SPINNER VC 1000 was manufactured in 2011. It features a Siemens 840DE-SolutionLine control, a 15" color screen, and a high-speed milling spindle up to 12,000 rpm. The machine offers X=1000 mm, Y=650 mm, Z=650 mm travels, and a rapid tool changer for 24 tools. Ideal for precise and efficient machining. If you are looking to get high-quality milling capabilities consider the SPINNER VC 1000 machine we have for sale. Contact us for more information. • Milling spindle up to 12000 rpm with "in-line" direct drive • Travels: X=1000 mm, Y=650 mm, Z=650 mm • Linear guides in all three axes • Tool taper size 40 according to DIN 69871-A • High-speed automatic tool changer for 24 tools • Spindle taper blow-out device • Full splash guard enclosure • Work area light • Chip conveyor VC 1000-HS • Coolant transfer to tool according to DIN 69871A Ijdpjx Ut Hgofx Ag Uoal • High-pressure pump and gravity paper filter with capacitive level switch • Tool holder SK40 for TC 50 touch probe

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, power: 5.16 kW (7.02 HP), load capacity: 450 kg, lifting height: 8,000 mm, lifting power: 450 kg/m, platform length: 2,270 mm, platform width: 1,120 mm, overall weight: 2,750 kg, transport length: 2,480 mm, transport width: 1,150 mm, transport height: 2,360 mm, construction height: 1,830 mm, fuel type: electric, tire size: 381 × 127 mm (Non-marking), tire condition: 100 %, wheelbase: 1,870 mm, ground clearance: 100 mm, color: red, Equipment: UVV, === MAIN SPECIFICATIONS === Year of manufacture: 2025 Operating hours: 1 Machine width: 1.15 m Drive system: 2-wheel steering / 2WD Driveable at full height: Yes Extendable platform: Yes (0.90 m) Power: 2 × 0.87 kW + 3.42 kW Working height: 10.00 m Platform capacity: 450 kg (113 kg on extension) Power type: Electric Battery type: Lithium-ion (28.8 V / 175 Ah) Automatic leveling: No Platform size (L × W): 2.27 × 1.12 m Tire type: Non-marking CE certification: Yes Weight: 2,750 kg Indoor / Outdoor use: Both === HIGHLIGHTS === • AC electric drive with maintenance-free lithium battery • Driveable at full height with speed limiting for safety Iaodpjw Af Acsfx Ag Uel • Automatic tilt and brake protection systems • High ground clearance and compact design for indoor and outdoor use • Fold-down guardrails and extendable platform (0.9 m) • CE certified and ready for immediate operation === CONDITION === Brand-new model 2025 with only 1 operating hour. Fully tested and ready for immediate use. Available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). The Magni ES 1012 AC+ is a modern electric scissor lift with a 10 m working height and a 450 kg platform capacity. Equipped with AC drive motors, maintenance-free lithium batteries and comprehensive safety systems, it delivers maximum reliability and efficiency for construction and maintenance applications. CE certified and ready for immediate use from stock. === SHIPPING === Crane loading available upon request. Flexible shipping options tailored to your destination. All logistics handled professionally by Collé Rental & Sales.

Condition: ready for operation (used), Year of construction: 2012, total height: 2,252 mm, overall weight: 9,300 kg, product length (max.): 5,000 mm, This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information. Iodox Urcgjpfx Ag Uoal • X-axis speed: 90 m/min • Y-axis speed: 60 m/min • Simultaneous X/Y speed: 108 m/min • C-axis speed: 330 rpm • Max. punching force: 180 kN • Max. pressure foot force: 20 kN • Max. workpiece weight: 160 kg • Max. sheet thickness: 6.4 mm • Max. sheet format: 2500 × 1250 mm (with repositioning) • Electrical connected load: 18 kVA • Fuse protection: 35 A • Pneumatic connection: 7–14 bar • Compressed air consumption: 8–10 Nm³/h • Tapping • Filling level inspection • Multibend • Multitool • Roller tools including cutting, pinching, folding, beading, knurling, deburring • Monitoring filling level • Hydraulic unit • Punch lubrication • Dimensions Machine Depth 6500 mm

Condition: new, functionality: fully functional, Year of construction: 2025, power: 5.16 kW (7.02 HP), load capacity: 408 kg, lifting height: 11,800 mm, lifting power: 408 kg/m, platform length: 2,270 mm, platform width: 1,120 mm, overall weight: 3,250 kg, transport length: 2,480 mm, transport width: 1,190 mm, transport height: 2,620 mm, construction height: 2,090 mm, fuel type: electric, tire size: 381 × 127 mm (Non-marking), tire condition: 100 %, wheelbase: 1,870 mm, ground clearance: 100 mm, color: red, Equipment: UVV, === MAIN SPECIFICATIONS === Year of manufacture: 2025 Operating hours: 0 Machine width: 1.19 m Drive system: 2-wheel steering / 2WD Driveable at full height: Yes Isdpfx Aexa Dt Ssg Ujal Extendable platform: Yes (0.90 m) Power: 5.16 kW Working height: 13.80 m Platform capacity: 408 kg (113 kg on extension) Power type: Electric Battery type: Lithium-ion (28.8 V / 175 Ah) Automatic leveling: No Platform size (L × W): 2.27 × 1.12 m Tire type: Non-marking CE certification: Yes Weight: 3,250 kg Indoor / Outdoor use: Indoor === HIGHLIGHTS === • AC electric drive with maintenance-free lithium battery • Driveable at full height with automatic speed limitation • Automatic tilt and brake protection systems • High ground clearance and compact design for indoor applications • Fold-down guardrails and extendable platform (0.9 m) • CE certified and ready for immediate use === CONDITION === Brand-new 2025 model with 0 operating hours. Fully tested and ready for immediate operation. Available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). The Magni ES 1412 AC+ is a robust electric scissor lift with a working height of 13.8 meters and a platform capacity of 408 kg. Equipped with AC drive, maintenance-free lithium battery, and advanced safety systems, it delivers top-level reliability and efficiency for indoor work. Fully CE certified and available immediately from stock. === SHIPPING === Crane loading available upon request. Flexible shipping options tailored to your destination. Handled professionally by the Collé Rental & Sales logistics team

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 2,380 mm, overall weight: 3,725 kg, product length (max.): 2,145 mm, This 4-axis Mitsubishi EA 12S die-sinking EDM machine was manufactured in 2016 in Japan. It features X/Y/Z travels of 400/300/300 mm, a maximum workpiece weight of 700 kg, and a stainless steel table measuring 700 × 500 mm. Equipped with a C-axis and Erowa chuck, it also includes a dielectric filtration system with a 400 L tank. Consider the opportunity to buy this Mitsubishi EA 12S die-sinking EDM machine. Contact us for more information about this machine. • Maximum Workpiece Dimensions: 850 x 640 x 250 mm • Maximum Workpiece Weight: 700 kg • Maximum Electrode Weight: 50 kg • Table Dimensions (LxW): 700 x 500 mm • Table Surface: Stainless steel • C-axis with Erowa Chuck: 152.5 – 452.5 mm • Maximum Dielectric Filling Level Stroke: 300 ml • Filtration System: Yes • Tank Capacity: 400 L • Filter Particle Fineness: 3 / 2 µm • Dielectric Temperature Control: Yes • Pulse Generator Power Supply with Transistor Control • Cooling Method: Fully Sealed, Indirect Air Cooling Dimensions Machine Depth 2050 mm Iasdpfx Agjx Uq Sye Usl

Condition: new, functionality: fully functional, Year of construction: 2025, power: 5.16 kW (7.02 HP), load capacity: 272 kg, lifting height: 8,000 mm, lifting power: 272 kg/m, platform length: 2,210 mm, platform width: 810 mm, overall weight: 2,230 kg, empty load weight: 2,230 kg, transport length: 2,480 mm, transport width: 830 mm, transport height: 1,900 mm, construction height: 2,360 mm, fuel type: electric, tire size: 381×127 mm (non-marking), tire condition: 100 %, wheelbase: 1,870 mm, ground clearance: 100 mm, color: red, Equipment: UVV, === KEY SPECIFICATIONS === Year: 2025 Operating hours: 0 h Machine width: 0.83 m Drive system: 2-wheel steering (front wheel drive) Drivable at full height: Yes Platform extension: Yes (0.90 m) Power: 2 × 0.87 kW drive motors + 3.42 kW lift motor Working height: 10.00 m Platform capacity: 272 kg (113 kg on extension) Power type: Electric Battery type: Lithium-ion (28.8 V / 150 Ah) Self-levelling outriggers: No Platform size (L × W): 2.27 × 0.81 m Tyre type: Non-marking CE certification: Yes Weight: 2,230 kg Indoor / Outdoor use: Indoor === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certified and fully documented Ready for immediate transport and use Comprehensive technical documentation available === CONDITION === Brand-new machine (2025) – unused, factory original condition. Iajdpfxjxa Ducj Ag Uel Lithium battery tested and in excellent state. Immediately available from stock in Sittard. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excluding VAT). The Magni ES 1008 AC+ is a fully electric scissor lift offering a 10 m working height and 272 kg platform capacity. Its compact design (only 83 cm wide) and non-marking tyres make it ideal for warehouses and logistics applications. Equipped with maintenance-free lithium batteries, proportional controls and drive function at full height. === DELIVERY === Crane loading available on request for smooth shipment. Flexible shipping options tailored to your destination and logistics needs. All transports professionally handled by the Collé Rental & Sales logistics team

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: HEIDENHAIN, This 3-axis Sigma Leader 6 vertical machining center was manufactured in 2007. It features extensive travel capabilities with X-axis at 1250 mm, Y-axis at 810 mm, and Z-axis at 630 mm. Rapid traverse rates reach up to 50 m/min, and it includes a high-capacity tool magazine with 40 positions. If you are looking to get high-quality milling capabilities, consider the Sigma Leader 6 machine we have for sale. Contact us for more information about this machine. • Axes: 3 / current spindle hours: approximately 33000 / x-axis travel (longitudinal): ranges from 1250 mm to 2000 mm / y-axis travel (transverse): 810 mm / z-axis travel (vertical): 630 mm / b-axis travel (swivel): -60° to +105° / c-axis travel (rotary table): 360° / x/y/z rapid traverse: ranges from 40 m/min to 50 m/min / b/c rapid traverse: ranges from 40 rpm to 50 rpm / acceleration x/y/z: ranges from 5000 mm/sec² to 10000 mm/sec² / acceleration b/c: ranges from 3. 5 rad/sec² to 8. 8 rad/sec² / guides: linear with sliding block with triple circulation of preloaded balls / pallet changeover time: 3 seconds (5-axis) • Power supply: 400v 50hz 3-phase line / power rating: ranges from 35 kw to 60 kw / rated current: ranges from 60 a to 105 a • Compressed air pressure: 6 bar / compressed air consumption: 150 nm³/h Iodpfx Aox D Nafog Ueal • Machine color: gray ral 7008 / protective cover color: yellow ral 1004 / workstation lighting: 2 or 4 / sound pressure level: 77 db(a) to 79 db(a) (standard, 15000 rpm) • Tool holder: n. 40 din 69871, n. 40 din 69871 (bt40), hsk-a63 din 69893-1 / max. Available power: 27 kw / max. Available torque: 235 nm, 158 nm, 86 nm / programmable indexed spindle angle positions: electronic with 3600 positions • Measuring system: heidenhain measuring system, electronic fold commutator / positioning accuracy (x/y/z): 0. 008 mm / positioning spread (x/y/z): 0. 006 mm / average reversal error (x/y/z): 0. 002 mm • Magazine type: chain magazine with 2 directions / number of positions: 40 (standard) - 50 (optional) / tool selection: "random" / tool changer: double-gripper arm, electromechanically driven / min. Tool change time: 1. 5 seconds / chip-to-chip time: 4. 5 seconds / max. Tool weight: 8 kg / max. Tool diameter: 80 mm / max. Tool length: 350 mm / max. Tool dimensions: 300 mm • At low pressure with oil emulsion: 10 nozzles around the spindle, max. 5 bar at 100 l/min / at high pressure with oil emulsion through the spindle (option): 15 bar at 15 l/min or 30 bar at 30 l/min / chip mixing: 2 parallel screws on the two long sides of the table and a side chip conveyor / cooling system filtration: 60μ filter system with 2 filter inserts and manual bypasscooling system filtration: 60μ filter system with 2 filter inserts and manual bypassinner cooling through spindle (IKZ)

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, power: 3.5 kW (4.76 HP), load capacity: 227 kg, lifting height: 5,800 mm, lifting power: 227 kg/m, platform length: 1,670 mm, platform width: 740 mm, overall weight: 1,630 kg, transport length: 1,860 mm, transport width: 760 mm, transport height: 1,830 mm, construction height: 7,800 mm, fuel type: electric, tire size: Non-marking 323×100 mm, tire condition: 100 %, wheelbase: 1,360 mm, ground clearance: 90 mm, color: red, Equipment: UVV, === KEY SPECIFICATIONS === Year: 2025 Operating hours: 1 h (new) Machine width: 0.76 m Drive system: 4x2 / 2-wheel steering Drivable at full height: Yes Platform extension: Yes (0.90 m) Power: 3.5 kW total (2×0.5 kW drive + 3 kW lift motor) Working height: 7.8 m Platform capacity: 272 kg (113 kg extended) Power type: Electric Battery type: Lithium-ion (28.8 V / 125 Ah) Self-levelling outriggers: No Platform size (L × W): 1.67 × 0.74 m (+0.90 m extension) Tyre type: Non-marking (323×100 mm) CE certification: Yes Weight: 1,630 kg Indoor / Outdoor use: Both (max. 2/1 persons) === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE-certified and supplied with full documentation Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === New machine – 2025 year, only 1 operating hour Battery tested and in excellent condition Available directly from stock in Sittard === LOCATION & DELIVERY === Located in Sittard, the Netherlands Worldwide delivery possible Price on request (EXW / excluding VAT) The Magni ES 0807 AC+ is a compact electric scissor lift with a 7.8 m working height and 272 kg platform capacity. Equipped with lithium batteries, non-marking tyres and the ability to drive at full height. Ideal for indoor and maintenance work. Fully CE-certified and ready for immediate use. Iedpew Afy Ujfx Ag Ueal === DELIVERY === Crane loading available on request for smooth transport upon dispatch Flexible shipping options tailored to your destination and logistics preferences All transport handled professionally by the Collé Rental & Sales logistics team