Used Lathe Y Axis for sale (15,481)

Condition: as good as new (ex-display), AXDL160SNG2525-D-750-1050-E0-00XX-Y-A, NTN SNR linear axis with spindle drive Ksdpfxovrhw No Aacjdu Model: AXDL160SNG2525-D-750-1050-E0-00XX-Y-A Type: AXDL160S Condition: As good as new Note on condition: Please note that the screw connections on the drive side must be tightened in accordance with the manufacturer's documentation before commissioning.

Condition: used, CNC Lathe - twin turret - subspindle Y axis NAKAMURA WT 250 CNC Fanuc, Series 16i-T Spindle - sub spindle 1 turret live tools + Y axis 1 turret live tools (lower) 2x C-Axis Kdsdpfx Ajwaa Dioaceu Swarf conveyor IEMCA TS560P Bar loader Under power in our in our warehouse in Gussago BS. Mimu machine tools Italy

Condition: good (used), Year of construction: 2003, Daewoo Heavy Puma 600 CNC Turning Centre with Fanuc Series 18i-T CNC Control, Chuck size 610mm, X axis 900mm, Z axis 1575mm, Spindle speed 1400rpm, 12 Station Turret and programmable Tailstock, Mills Swarf and Coolant Conveyor System, Machine weight 16100 kgs, fitted with Tool Presetter. S/No. PM600042 (2003) Kdsdpfx Aewvbubjacou

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Controller SIEMENS 828D with Shopturn and 17 inch Touch screen Swing dia 550 mm Turning length 428 mm Max. turning dia 300 mm Spindle bore 62 mm Max bar dia 51 mm Spindle face A2-6 Spindle speed 35 - 5000 rpm motorspindel Travel X axis 210 mm Travel Z axis 561 mm Turret 12-fold (all stations driven) Turret interlock hydraulic Turret drive servo Tool change time 0,2 sec. Tool section 25x 25 mm Max speed of life tools 5000 rpm. Max power of live tools 5 kW Max milling capacity (shaft mill) 16 mm Max milling capacity (milling head) 50 mm Max drilling capacity D16 mm Max tapping capacity M16x2 Rapid speed Z axis 30 m/min Rapid speed X axis 30 m/min Position accuracy 0,008 mm Repeat accuracy 0,003 mm Tailstock Pinole conus MT4 Travel of tailstock body 565 mm Hydraulic tank capacity 20 L. Power of hydraulic pump 1,5 kW Hydraulic power 3,5 - 6 Mpa Volumen of lubrication 2 L Power of lubrication pump 25 W Coolant tank volume 130 L Kdsdpfx Aaswbu T Ujceu Power of coolant pump 25 W Motor power cont. 11 kW 400 Volt 50Hz Motor power short time (30 min) 15 kW 400 Volt 50 Hz Weight 4000 kg Dimensions LxWxH = 2600 x 1685 x 1768 mm Accessories Coolant unit, Turret for 12 driven tools, 200 mm hydr. chuck, Linear guides and ball screws THK/Japan, SHOP TURN, Spindle cooler, Chip conveyor, Tool presetter, automatic tool length compensation, barfeeder interface, air blowing for chuck and turret, high pressure coolant, oil selector.

Condition: new, AXDL160SNG2525-D-900-1200-E0-00XX-Y-A, NTN SNR linear axis with synchronous motor Kdodpfx Aajvrf E Decsu Model: AXDL160SNG2525-D-900-1200-E0-00XX-Y-A + 1FK7060-2AF71-1CH1 Type: AXDL160S Condition: New

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Kodpfx Aaovw Uqascjdu Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: new, AXDL160SNG2525-D-1000-1300-E0-00XX-Y-A, NTN SNR parallel axis with synchronous motor Model: AXDL160SNG2525-D-1000-1300-E0-00XX-Y-A + 1FK7060-2AF71-1CH1 Type: AXDL160S Condition: New Ksdpfxevrf Tbj Aacjdu

Condition: new, AXDL160SNG2525-D-1200-1500-E0-00XX-Y-A, NTN SNR parallel axis with synchronous motor Model: AXDL160SNG2525-D-1200-1500-E0-00XX-Y-A + 1FK7060-2AF7-1CH1 Type: AXDL160S Condition: New Ksdpfx Asvrf Thsacjdu

Condition: new, AXDL160S, NTN SNR linear axis with spindle drive Model: AXDL160SNG2525-D-800-1100-E0-00XX-Y-A Type: AXDL160S Condition: New Kodpfx Aajq S Up Hscsdu

Condition: new, The new Hans Schreiner stepless metal lathe with lead and feed spindle and face feed. Bed and gears hardened and ground. Main spindle, tapered roller bearings and wedge strips. Camlock mount C4, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, good cutting performance. Speed continuously adjustable using electronic speed control with digital speed display. Incl. three-bank chuck 160 mm and steady rest. The 2-axis digital display guarantees the highest precision when turning. Technical data: Centre height 140 mm Centre width 650 mm Max. turning diameter 280 mm Spindle bore 38 mm Kdsdpovrv D Dofx Aacju Spindle cone MK 5 Tailstock taper MK 3 Spindle speed 75 - 500 rpm and 300 to 2000 rpm Speeds 2 Main motor power 1.5 kW S6 Voltage 230 volts Weight 210 kg Standard equipment: 3-jaw American chuck 160 mm with interchangeable jaws for internal turning Centering point 2-axis digital display Optional equipment: Base frame with drawer

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm Ksdpexpqm Rjfx Aacsdu RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, The hose bag packaging machine shown in the picture is for sale. It can pack liquids, sauces, or dry goods. It also has a vacuum function, and gas flush function. Carrying handle design. With a vacuum pump and a conveyor belt. Ceqfu792Uk The diameter of the tube is about 23 cm, the length of the package can be adjusted in the program. We used it to make 1-2 kg packages, but it is good from 0.5 kg to 4 kg. Kdodpfou S Hfmox Aacsu The machine is about 5 years old but we used it for 1 month. Quality Chinese made. Top Y Machinery TOPY-VP520 VFFS Packing Machine Can be viewed and tried in Székesfehérvár. The price shown is without tax.

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Kodpfewhylvjx Aacedu Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: ready for operation (used), Year of construction: 1978, For sale set of E. Gillet machinery in excellent condition. Restored and ready to work. Kedouykpnspfx Aacodu - SAW E. GILLET model TH 1200: With left blade and column on the right. Blade tension with electric motor. Motor of 60 C.V. - E. GILLET TROLLEY model EUROPA: Three claws with Brushless motor with gyrotrons and gyroster. Amenaje GS 20 C.V. motor. Control desk with integrated mudata. Both equipments have been completely restored by professionals, guaranteeing an optimal operation and a long useful life. Approximate year of manufacture: 1978. High quality machinery built to last. #circular saw #woodworking cart #industrial machinery #woodworking machinery #industrial tools #carpentry #joinery #woodworking shop #woodworking shop #secondhand #occasion #restored #E. Gillet #TH1200 #Europe #left-hand blade #right-hand column #brushless motor #turnover #giratroncos #girracosteros #AmenajeGS #control panel #integrated muffler #60CV #20CV #1978 #electrical tension #saw blade #solid wood cutting #furniture manufacturing #precision #durability

Condition: used, Year of construction: 2021, functionality: fully functional, 3 colour flexo with slotter, rotery die cutter and folder-gluer SERIAL WORK(mm): 1290x2600 HOPPER OPERATION(mm): 1550x2600 MIN. CARTON WIDTH(mm): 350x750 MAX. PRINT AREA(mm): 1290x2350 CHANNEL WIDTH(mm): 9 CLICHE THICKNESS(mm): 3.9 MAX. CARDBOARD THICKNESS(mm): 10 CAPACITY (PCS/HOUR): 6000 MAX. ROTERY CUTTING AREA(mm): 1240x2350 CUTTER TIRE THICKNESS(mm): 10 PRESSURE TURN DIAMETER(mm): 399 CLICHÉ PRINT ROLLER DIAMETER(mm): 407 ROTERY FORMWORK ROLLER(mm): 360 ROTERY RUBBER REDIAMETER(mm): 292 MAIN MOTOR POWER(kw): 15 Kjdpfow Rya Dsx Aacjdu

Year of construction: 2002, condition: like new (used), Capacity: 3.420 m3/h Vacuum: -270 mbar Operational press: 260 mbar Power: 7,5 kW Kedpfx Asgq Rbhjacedu

Condition: ready for operation (used), functionality: fully functional, Small manual Turning-machine/Lathe 1IC611V with quick locking collet chuck. With Machine 4 collets. More collets is possible to buy, ~25EUR/pc. Kdsdpfx Aaowbdmkocsu

Condition: like new (used), functionality: fully functional, Year of construction: 2025, Rotary parking system for 10 compact cars, brand RMV, model SER-10V. Electromechanical multi-platform parking equipment with a capacity to store 10 compact cars, constructed from structural steel, featuring an electromechanical drive (25 HP motor) and automated electronic system controlled by a PLC panel. Dimensions: width 7 m, length 7 m, height 12.5 m, load capacity 16 tons. Kdedoxgu Efopfx Aaceu

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. Kdedpfxoxdmgve Aacju The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel met spaantransportband met Kitagawa 4e as Table dimensions: 1200 x 500 mm Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Toolchanger: yes Kdjdpfxoxadmro Aacsu Number of toolholders: 30 positions

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: Y2311/355, The powerful fiber lasers of the Y-Series are ideally suited for industrial product marking. They are used in almost all metal and plastics processing industries for precise and economical direct part marking (DPM / Direct Part Marking) of products and components: from automotive manufacturing to medical and security technology, and all the way to electronics. All types of codes (QR codes, DMC / DataMatrix codes, barcodes), alphanumeric characters, logos, and inscriptions are marked reliably and with high precision using these fiber lasers. The optionally integrable camera system in the marking head ensures zero-defect quality and process reliability through automatic optical validation and verification steps. Kdodpfxsw Npvfs Aacou With its modular design, this fiber laser series offers maximum flexibility and enables straightforward adaptation to product-specific marking requirements as well as easy integration into production lines and FOBA workstations: Nine fiber lasers of different power classes and pulse widths are combined within a modular platform. Marking field calibration and parameter sets for optimizing marking quality, accuracy, and speed enable optimal configuration for any given application. Main application areas: Medical technology, automotive manufacturing, automotive supply industry, integrators, plastics and metal processing industries, mechanical engineering and tool construction, electronics industry, security technology, ID and personalization sector (card, ID, and passport personalization), stationary and continuous marking applications.

Condition: new, pressure: 320bending length: 4050column width: 3550daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 4740x1725x3100weight approx.: 17.9004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S640 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S640 (2D Grafik Steuerung)motor power: 22 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Kdedpfx Aefrqhpsacsu Other controls: ESA 640 2D 15'' touch screen control                                         ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)         ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)       ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)       ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10 500 mm Uitgebreid armbereik van de robot (links en rechts): 3045 mm maximale werkstuklengte als het een profiel is: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10 500 x 3045 mm max. werkstukhoogte: 3500 mm Kjdov Sfk Hepfx Aacodu Gereedschapswisselaar met 13 posities: - 12 aangedreven gereedschappen - 1 meetsonde Freeskop: -SK40 - 12 kW op spindel / 16 000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit aanpassen naar één werkgebied (voor een groot werkstuk) of opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: new, pressure: 320bending length: 3020column width: 2555daylight: 650stroke lenght (max.): 400column throat depth: 450messurements (LxWxH): 3785x2290x3100weight approx.: 14.4504 axes (Y1, Y2, X, R): Ja alle Achsen über die CNC Bombierung Steuerung Delem DA 66 T (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Bombierung Steuerung Delem DA 66 T (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Kodpfx Asfy Sb Eeacedu

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Kedpjd Ehh Refx Aacjdu Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00