Used Cnc Rotary Axis for sale (16,601)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Dsdpju Tln Nofx Af Ujki Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Dodpfx Afow R Syij Ueki

Condition: like new (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed length X-axis: 500 mm, feed length Y-axis: 300 mm, feed length Z-axis: 180 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: Eding CNC, spindle speed (min.): 20,000 rpm, input voltage: 220 V, number of axes: 4, Equipment: rotational speed infinitely variable, For sale is a compact BZT CNC milling machine (E-ST series) with a fully enclosed safety housing. The machine features a 3-axis configuration including a 4th axis (rotary table) and is suitable for precise milling operations in aluminum, plastics, and non-ferrous metals. Key features include: robust machine frame, T-slot table, frequency-controlled high-speed spindle, manual pulse generator (MPG), integrated frequency inverter, safety limit switches, and clean internal wiring. The machine is in well-maintained optical and technical condition. Dkjdpfx Aoykvp Isf Uei

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Dkjdpfxeya Dtmo Af Uei

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Dodpfx Aew R St Nof Uoki

Condition: used, Year of construction: 2006, functionality: unexamined, We are offering here a rotary table from the brand Parkson. The model is PAR-251 R. The rotary table has a diameter of just under 250mm. Dksdsxtu Efepfx Af Uji Feel free to contact us for a non-binding offer.

Condition: used, MORI SEIKI SL-45MC-1500, 3-AXIS CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-45MC-1500 CONTROL FANUC 15T WITH FAPT, LED SCREEN CHUCK DIA 400mm SWING 670mm BETWEEN CENTRES 1700 mm SPINDLE BORE 120.0 mm SPINDLE SPEED 2,500 RPM, 4 SPEED GEARBOX TURRET 12 STATIONS, DRIVEN TURRET RAPIDS X: 12,000 mm/min Z: 15,000 mm/min TAILSTOCK INCLUDED, PROGRAMMABLE PLUS NEW “SCHUNK” SMW QUICK CHANGE CHUCK (WORTH 20,000 GBP) C-AXIS AND DRIVEN TOOLS HYDRAULIC STEADY FULL SET OF MANUALS MIST COLLECTOR VERY GOOD RANGE OF TOOLING Dkjdpfx Afsymmqbs Uji NEW SWARF CONVEYOR IN EXCELLENT WORKING ORDER

Condition: ready for operation (used), controller manufacturer: AZ-102 - Windows, total height: 3,315 mm, total length: 5,055 mm, total width: 3,745 mm, empty load weight: 8,500 kg, Bewerkingscentrum dat vroeger werd gebruikt voor het vervaardigen van bandenmallen. Gereedschapswisselaar met 24 posities 5 assen tegelijk! Max longitudinal travel X-axe: 1100 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 500 mm Max height workpiece: 580 mm Power on spindle: 2.2 kW Admission in boring head (ISO): F12 Spindlespeeds: 3 - 40 000 rpm Table size: 1700 x 600 mm Table turning angle: 360° Dkodpfxsxuwx Ro Af Usi Digital screen: ja ACCESSORIES & TOOLING: yes Coolant pump: yes Toolholder: yes Number of tools: 24 positions

Year of construction: 2025, condition: like new (used), functionality: fully functional, 2025 BCAMCNC 5 Axis CNC Router – Like New, Never Used For sale is a 2025 BCAMCNC 5 Axis CNC Router, installed but never put into production. This machine is in as-new condition, making it an excellent opportunity to purchase a state-of-the-art 5 axis router without the lead times or cost of a brand-new unit. The BCAMCNC 5 Axis Router is designed for high-precision machining of complex parts, ideal for industries such as aerospace, automotive, furniture, marine, signage, mould making, and advanced composites. ✅ Key Features & Benefits 5 Axis CNC machining – full simultaneous interpolation for complex 3D parts Like new – installed but never used Heavy-duty welded frame for stability and long-term accuracy High-speed spindle for efficient cutting across a wide range of materials Automatic tool changer (ATC) for maximum productivity User-friendly CNC control with advanced software integration Vacuum table for secure workpiece holding Perfect for wood, plastics, composites, foams, aluminium and non-ferrous metals 📐 Technical Specifications (2025 BCAMCNC 5 Axis CNC Router) Table Size: 3000 × 1500 mm X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 1200 mm A-Axis Rotation: ±120° C-Axis Rotation: ±360° continuous Spindle: 9kW High-frequency HSD (18,000 RPM) Tool Changer: 8 position automatic tool changer (ATC) Drive System: Servo motors with helical rack & pinion on X/Y, ball screw on Z Table: Vacuum table with powerful 7.5kW pump, multi-zone clamping Control System: Syntec 610MA-ES industrial CNC controller Max Cutting Speed: Up to 25 m/min Repeat Accuracy: ±0.05 mm Power Supply: 380V / 50Hz 📦 Included with Machine Full extraction-ready setup Dedpfxsxddk Sj Af Uski Includes tooling package Documentation & manuals 🌍 Condition Installed but never used – machine is like new 2025 model – latest generation technology Available immediately – no waiting times 🔑 Summary This is a rare chance to purchase a 2025 BCAMCNC 5 Axis CNC Router in unused condition. With full 5 axis capability, a heavy-duty structure, and precision control, it is the perfect solution for companies requiring high accuracy and productivity in machining complex 3D parts.

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Dedpfxeyn Em Re Af Uski Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Complete specifications are shown in the photos of the listing. Dkedpjymgd Iefx Af Uei CNC HEIDENHAIN 426 Machine in good working condition, videos available upon request.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dedpfx Afoym Sdyo Ueki

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dedpoym R Tgjfx Af Uski

Condition: used, Year of construction: 2020, machine/vehicle number: 701644, Travel paths (X/Y/Z): approx. 2,000 x 1,000 x 150 mm, clamping table surface (X/Y): approx. 2,100 x 1,050 mm, equipped with HEIDENHAIN TNC620 touch control, 1 cooling unit, 1 workstation mat, hoses up to ball valve (collection by arrangement, until end of March) Dedoyn Nipopfx Af Uski

Condition: good (used), Year of construction: 2008, X/Y/Z 600/770/805mm, spindle 12,000 rpm / HSK 63, ATC 40, swivel table unit (A'-axis), rotary table with T-slots (B'-axis) through spindle cooling, all machines with coolant tank, Chip conveyor and belt filter system, CNC Heidenhain iTNC 530; Control: CNC Heidenhain iTNC 530 Dsdpfx Afeh Hlmco Ueki

Condition: good (used), Year of construction: 2002, 5-axis CNC machining center Manufacturer: AXA Machine Model: VPC 50 U Control: Siemens Year of manufacture: 2002 Number of controlled axes: 5 Gantry design TECHNICAL DATA Djdpsymw Tgefx Af Uoki Travel ranges - X-axis: (mm) 2,300 - Y-axis: (mm) 1,200 - Z-axis: (mm) 700 Spindle: Swiveling spindle - Swivel range (degrees): 90 (0.001) - Speed range (rpm): 30–7,500 Tool magazine - Tool holder: SK50 Machine table - Table size, fixed table L x W: (mm) 1,100 x 1,100 - Diameter of built-in rotary table: (mm) 1,100 x 1,100 Technical data and information subject to change and errors excepted.

Condition: used, Year of construction: 2002, machine/vehicle number: 88821-5, Travel paths (X/Y): 600x450 mm, 90-position tool changer HSK-E40, 42-position electrode holder changer EROWA ITS, 7-position pallet changer PAROTEC, 1 cooling unit LAHNTECHNIK BL 040-116, year of manufacture: 2008, 1 graphite extraction unit EXTOR 3500-3S MP. The machine displays an error message when the spindle is started, therefore it is being sold as defective. Dksdpfx Asyn Nhxsf Usi

Condition: excellent (used), Year of construction: 2010, total height: 3,300 mm, total length: 5,600 mm, total width: 4,300 mm, table load: 2,000 kg, overall weight: 10,500 kg, Spindle SK 40 Speeds 8000 Rpm with 165 Nm Workload 2000 Kg ATC 56 Positions Hours spindle 10.304 Closed housing with automatic top door IKZ Coolant system LTA Air Cleaning Djdpfx Afsyh U E Hj Uski Length:5600mm Width:4300mm Height:3300mm Weight:10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Dodsym Nc Tepfx Af Ujki Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm Dsdpfjym Nctjx Af Ujki T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Dksdpsym Nb Aofx Af Uei Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Djdpfxjym Nbvo Af Uoki Machines can be inspected under power by appointment.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Dkodsym I U Ispfx Af Usi Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Dkodpoygw Hmjfx Af Uji Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Dsdpjygw E Nsfx Af Uski Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.