Used Lathe Y Axis for sale (24,948)

Condition: good (used), Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: Meuser, lead screw lathe type M-IV-S -Machine bed: hardened -Turning length: 3800 mm -Turning Ø over bed: 720 mm -Turning Ø over support: 440 mm -Spindle bore: Ø 95 mm Djdpfx Agowrfkfjkeki -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 400 mm -Tailstock mount: MK6 -Drive: 18 kW -Accessories: 1x bezel, Multifix tool holder, tools see photos -Dimensions: 5930/1650/H1600 mm -Weight: 7500 kg

Condition: excellent (used), Myford 254s x 22 Tool Room Lathe Condition Used Stock Number 00195 Distance Between Centres 22” Swing Over Bed 10” Spindle Speeds 53-2000rpm Imperial machine Tail stock morse taper 2 Fixed and travelling steady 6" 4 Jaw chuck Dodpfxeyka Tws Agkoki 5" 3 jaw chuck 11" Faceplate Single phase 230v

Condition: used, Doosan Model S 550L CNC Lathe Control Fanuc 21T Swing over bed 710.0 mm Max turning dia 550.0 mm Max turning length 1130.0 mm Chuck dia 400.0 mm Dedpfxeyka Sys Agkoki Spindle bore 102.0 mm Spindle nose 6 mt Spindle speed 30 – 2500 rpm Spindle motor power 22 kw Turret 12 stations, Feeds 0.001 – 133 mm/rev Rapid X 20m/min Z 24m/min Bar capacity 90.0 mm Tailstock Swarf conveyor Manuals

Condition: excellent (used), ECOCA MT 312-750 CNC Lathe Year 2006 CNC Control Fanuc 21i-TB Swing over bed 600mm Dkedpfsyka Smox Agkoi Swing over saddle 450mm Turning dia 450 over bed Spindle bore 102mm Spindle speeds 0-3200rpm Spindle power 18.5/22kw Turning length 730mm Tailstock Tool arm 12 station turret 12” 3 Jaw Chuck Swarf conveyor Filtermist extraction Tool holders

Condition: good (used), Mazak Integrex E-410H Multi-Tasking Lathe Mazatrol 640M Pro Control, 610mm Turning Dia Serial No. 164385 (2003) Dedpfx Agovgzuwjkeki

Condition: good (used), Year of construction: 2006, Year of manufacture: 1998 to 2006 Dkedpfx Aoypltgogkji Available from current location

Condition: good (used), Year of construction: 1992, At site. Year of manufacture: 1982 to 1992. TYPES: SF 32 DNT, AF 32, AF 26, AF 26 DNT, AF 32, SF 32, SF 51. Dodpfxjyplpno Agkoki

Condition: used, Year of construction: 2000, Technical details: number of spindles: 6 spindle passage: 32 mm Dodjyqwvijpfx Agkski Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2000 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm pick-up unit, Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2001, Technical details: number of spindles: 6 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or Dodpfx Agsyqvlvskski *

Condition: used, Year of construction: 2003, Technical details: number of spindles: 6 spindle passage: 36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Djdpfx Agjyqpqxskjki Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm!!! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2015, Traverses X Y Z; 630 x 560 x 510mm, A axis -125/+ 10 degrees, C axis 0.001 degrees, table size 300mm diameter, Maximum diameter 520mm, maximum workpiece height 350mm, spindle taper BT40, 90 station ATC, spindle speed 20,000rpm, Fanuc G-Tech 31I control, through spindle coolant and swarf conveyor, spindle probe. Dksdpfx Agsyfv Dhjkei

Condition: good (used), Max. turning diameter: approx. 1100 mm Faceplate turning diameter: 800 mm Maximum turning height over faceplate: 900 mm Max. table load: 2000 kg Maximum total cutting force at 700 mm diameter: 3400 kg 12 faceplate speeds: 12 - 200 rpm Number of feeds, horizontal and vertical: 8 Feed size, horizontal and vertical: 0.069 – 2.6 mm/rev Rapid traverse of slides: 2500 mm/min Drive power: 15 kW Dimensions (L x W x H): 2300 x 2100 x 2900 mm Dedpfoxamgzex Agkjki Weight: approx. 7,500 kg Accessories / Special features: • 2-axis digital readout (new in 2024) • 5-position star turret • Emergency stop switch • Chip guard for faceplate Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Djdpsym Sdysfx Agkeki Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm Dkjdpeym R Tgefx Agksi ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, 0400 mm 1250 mm 200 mm 55 mm 315 mm Dkjdswp Tckepfx Agkei 2700 U/min D1-6 DIN 55029 73 mm 140 mm

Condition: used, Year of construction: 2001, swing diameter max. 450 mm chucking diameter 400 mm control Siemens 840D (Index) Max. rpm 4.200 min/-1 power capacity - main spindel ( 35,5 / 56 ) kW max. Torque ( 340 / 550 ) Nm C-Axis 0,001 ° number of toolpositions 2x 12 pos driven statition 2x 12 pos worktool system VDI 30 max. spindle speed driven tools 6.000 U/min. power capacity - driven tools 9,5 kW max. Torque 40%: 19 Nm Y - Axis +/- 90 mm B-Axis +270° / -90 ° x-axis 730 mm z-axis 340 mm y-axis +/- 90 mm b-axis +270° / -90 ° rapid traverse X: 40 / Z: 30 m/min numbers of pallets 24 pos. size of pallet 410 x 300 mm max. workpiecediameter 300 mm max. workpiece weight incl. Pallet: 25 kg Chain width 75 mm band speed 7,5 m/min total power requirement 56 kW weight of the machine ca. 9,0 t dimensions of the machine ca. 8,5 x 6,0 x 2,7 m CNC - Vertical Lathe Dkedpfeyq Sk Iox Agksi INDEX - V 300 Y/B - incl. 24 pos. palett changing system Schnaithmann - incl. ball screw as spare part - incl. 39x driven tools - incl. 39x tool holders

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm Dkjdpfx Ageydqpiokoi feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Year of construction: 2007, turning diameter over bed 0140 mm turning length 285 mm control 810D Siemens Dkjdpfx Asx Hpyyjgkoi turning diameter over bed slide 140 mm swing dia. 300 mm spindle turning speed - stepless 0- 5000 U/min- rpm spindle bore 45 mm feeds 0- 12 m/min voltage 400 V connected load 14 KW face slide travel 250 mm longitudinal travel 285 mm dimensions of the machine ca. 2,7 x 1 x 1,6 m taper diameter VDI 20 mm main drive motor 10,2 kW weight of the machine ca. 1,7 t Machine is without live tooling and without tailstock.

Condition: ready for operation (used), Year of construction: 1975, turning diameter over cross slide: 900 mm, turning diameter: 1,260 mm, center height: 630 mm, center width: 5,000 mm, overall weight: 10,000 kg, capacity 5000X1260MM Djdpfxsyrd Arj Agkeki 4-jaw chuck 1200MM steady rest rapid traverse

Condition: ready for operation (used), Year of construction: 1990, spindle bore: 37 mm, turning diameter: 360 mm, turning length: 750 mm, overall weight: 1,600 kg, 2-axis Acu-Rite DRO; spindle bore 37 mm; variable spindle speed up to 3000 rpm; working capacity 750x360 mm; Multifix tool turret Dedpfx Agoydydcekski

Condition: used, Year of construction: 1990, turning diameter over bed 0520 mm turning diameter over slide rest 300 mm turning length 1625 mm spindle bore 68 mm spindle turning speed range 23- 1250 U/min total power requirement 7,5 kW weight of the machine ca. 3 t dimensions of the machine ca. 2,8 x 1 x 1,4 m Dkedpfx Agsyn R Exsksi With Multifix holder, chuck und chuck safety cover.

Condition: used, Year of construction: 2013, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, Dkedpfx Aoyffz Njgkoi 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, collet chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor, parts catcher.

Condition: used, Year of construction: 2020, Lathes Travel distance X: 293 mm Travel distance Y :130 mm Travel distance Z: 1350 mm turning length: 1285 mm Dksdpeyrfl Usfx Agkei max. turning diameter: 850 mm max. circulation diameter: 420 mm spindle boring: 102 mm input Power: 26 kW max. turning moment: 1123 NM range of revolutions till: 2800 rpm Control: Fanuc I-series powered tools control Fanuc The machine offers a maximum turning length of 1,285 mm, a maximum turning diameter of 420 mm, and a maximum swing over bed of 850 mm. The main spindle provides a spindle bore of 102 mm and a speed range up to 2,800 rpm, delivering high torque and stable machining performance. Equipped with a 12-station turret, driven tools, and a FANUC i-Series control, the machine is well suited for complex turning and milling operations in modern production environments.

Year of construction: 2015, condition: excellent (used), 4-axis machining center automatic positioning of clamps 4 pneumatic clamps automatic toolchage 2 pneumatic end-stops 3d software Camplus Dkodpfx Aoyrg Nnjgkoi

Condition: excellent (used), 4-axis CNC machine usefull lenght 7500 mm Dynamic pendular over 2 zones 8 pneumatic clamps with CNC positioning Dedpfoyrguqjx Agkoki automatic tool change Software 3D Camplus