Used Lathe Chuck for sale (7,101)

Condition: used, Year of construction: 2000, . max. swing diameter 460 mm hollow 66 mm digital . multifix . centre distance 1000 mm feed: . weight of the machine ca. 1,8 t +++++ Please note: Bwjdpfx Aowhqzuodxew The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 200 mm -Bolt circle: Ø134 mm -Hole: short cone 6, cone Ø 101 - 106 mm -Dimensions total Ø 200 x 145 mm -Weight: 7.6 kg Bwsdpjxrk T Nsfx Adxjw

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm Bedpexugdisfx Adxoww bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Bwedpfx Ajxp Hudsdxjw

Condition: ready for operation (used), Year of construction: 1995, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW Bsdpfx Aextfx Aodxsww spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. The machine was only used in a prototype workshop for sporadic applications. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, 0390 mm 610 mm 54 mm 330 mm 4000 U/min A1-6 DIN 55026 Bwjdpfew In Epjx Adxow 60 mm 140 mm

Year of construction: 1966, condition: used, bed bridge ja 579 mm centre distance 2200 mm weight 3 t Bedpfxjrxxb Nj Adxjww

Condition: ready for operation (used), YEAR OF MANUFACTURE: 1963 (see attached documents for technical data) Bwsdpfx Ajxcw Axsdxow Swing diameter: 600 mm Turning length: 1000 mm Equipment: - Three-jaw chuck Ø 250 mm - Four-jaw chuck Ø 250 mm - Tailstock center - Quick-change drill chuck MK5 - Documentation

Condition: used, Year of construction: 2006, with C-axis with driven tools Bwodpjr E Amgjfx Adxow FANUC 18T-C control turning diameter -380 mm turning length 490 mm Spindle speed -3,500 rpm Upper turret holder with 12 positions, 6 of which are driven Tool presetter Chip conveyor

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed rod lathe Make: WEILER Model: COMMODOR Year: 1979 Technical Data Bedpfx Adext Ngqjxjww Manufacturer: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • Röhm 3-jaw chuck, D 200mm • Multifix toolpost • The additional 3-jaw chuck shown on the machine is not included in the scope of delivery! All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 1997, turning diameter x mm turning length x mm control x turning diameter x mm turning length x mm Bwodpfx Adoudc Uhjxow swing diameter over bed slide x mm total power requirement x kW weight of the machine ca. x t

Condition: used, Year of construction: 1998, turning diameter max. 250 mm turning length max. 900 mm control FANUC SERIE 0-T turning spindle Durchlass 75mm chuck diameter 250 mm turning speeds 0-3700 U/min transmission ratio 2 tool numbers 12 Bwedpfxoucgxus Adxew feed speeds X/Z 15/20 mm/min quill stroke 100 mm diameter of quill 110 mm tool adaptor MK 4 coolant tank 130 l weight - pallet system 5500 kg

Condition: used, Year of construction: 2008, turning diameter max 300 mm turning length max. 2000 mm control Siemens Serie 810D Bodpfx Adjudc Uzoxeww turning spindle Durchlass 90 mm 300 mm Feed speed 6/6 m/min. number of tools 8 quill stroke 300 mm diameter of quill 105 mm taper MK 6 coolant tank 100 l total power requirement 15 kW weight of the machine ca. 4650 KG

Condition: used, Year of construction: 1999, turning diameter 450 mm Bwjdpsvanvnefx Adxow turning length 380 mm control FANUC

Condition: used, Year of construction: 1984, serial number 1113-23 turning length 500 mm turning diameter 220 mm chip conveyor ja kW Werkzeugwechsler 12-fach spindle turning speed range 5000 U/min tail stock automatisch Bwodpfxsvxltus Adxjw

Condition: used, turning diameter . mm turning length . mm Bjdpfx Aoqn A Rnsdxoww control 2x 840 D Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW

Year of construction: 1977, condition: used, turning diameter . mm turning length . mm swing diameter over bed slide . mm fabric-no. 32021 Bwjdpfxeq Awigo Adxsw weight 2 t

Condition: used, Year of construction: 1980, centre height 180 mm centre distance 1250 mm 360 mm Bjdpfoub Uxmsx Adxeww spindle bore 41 mm spindle turning speed range 11-2800 U/min weight of the machine ca. 1900 kg

Condition: used, turning diameter . mm turning length . mm swing diameter over bed slide . mm Bedpfx Aeqn A Rredxeww

Condition: used, Year of construction: 2003, turning diameter max. 420 mm turning length 1090 mm Bwsdeucgyljpfx Adxjw control FANUC Serie 18i-TB turning spindle Durchlass 108 mm 250 / 315 turning speed range 0-3750 U/min Feed speed 18/24 m/min. workpiece 12 quill stroke 100 mm diameter of quill 110 mm taper MK 4 number of driven tools 12 mm turning speeds 3000 U/min 22 nm coolant tank 140 l total power requirement 22/18,5 kW weight of the machine ca. 6500 KG

Year of construction: 1998, condition: used, 2 turning diameter max. 250 mm toll turrets 2 x 12 control Fanuc 16 T tool taper HSK 63 04800000181 frequency 50 Hz ampere 168 A Bwsdpfxjqn A Rgo Adxsw

Condition: used, Year of construction: 1969, faceplate diameter s mm swing diameter 1000 mm turning height 1000 mm weight of the machine ca. 5 t Bodpjv Dx Dkjfx Adxsww

Condition: used, max. 800 mm turning length max. 800 mm Bsdpfx Adoh D Anajxjww chuck ohne documentation inkl. weight of the machine ca. 8 t

Condition: used, Year of construction: 1966, . centre distance 3000 mm max. swing diameter 660 mm multifix . steady 2 Stück Bwjdpjh Uytqsfx Adxow weight of the machine ca. 5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1977, turning diameter x mm turning length x mm Bodpfjrpa Nyex Adxsww swing diameter over bed slide x mm turning diameter over bed x mm 550mm weight of the machine ca. 1,5 t