Center Lathe

Präziwe celtic 12

Condition: used, Year of construction: 2017, working width 4 m Number of gangs . 0 Pgjdpfjyv Iu Usx Ac Aot Number of folders 2 0 Number of rollers 1 St.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Pgjdpfxeu Rni Ho Ac Ast Cutting zone lighting Stroke counter Machine feet *

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Pgsdet N Antopfx Ac Ast Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: as good as new (ex-display), Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Feed speed (m/s) 1-5 Sanding belts Motor (kW) 3 Psdpotzkgbsfx Ac Aegt Wheel, motor (kW) 1.5 Feed motor (kW) (2x) 0.12 Total power (kW) 5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,800 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,500 mm, total width: 3,350 mm, total length: 3,060 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, table load: 1,500 kg, overall weight: 6,500 kg, FGS 50/63 - TOS KUŘIM Knee-Type Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Push-Button Panel Digital Axis Readout System Completely Overhauled in 2025 Warranty: 12 months Availability: Immediately in stock CONDITION OF A NEW MACHINE – FULL REBUILD WITH GEOMETRIC ACCURACY PER MANUFACTURER SPECIFICATION FGS 50/63 – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 3,060 mm Overall width: 3,350 mm Overall height: 2,500 mm Pgjdpjxpugnjfx Ac Ast Total weight: 6,500 kg Total power input: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Transverse travel Y-axis: 630 mm Vertical travel Z-axis: 500 mm Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,800 rpm Spindle motor power: 15 kW Max. spindle torque: 2,500 Nm Feed range X – Y / Z: Number of steps / range: 16/ 10 – 1,800/ 2.5 – 450 mm/min Rapid traverse: 4,000/1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,500 kg

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels Pgsdpfx Acotv Rias Aet - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Podpfxstv Ikle Ac Aogt Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min Pedpfxjxl E Syj Ac Aegt * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Pgedpji Dfidofx Ac Aot Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, 6 St. range L-W-H 880 x 580 x 800 mm weight 126 kg 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. 2 x 75, 2 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. Pgodpeupxrbsfx Ac Aet 12x dividers long 32x short dividers 1x stacking tray