Used Lathe Chuck for sale (6,998)

Condition: ready for operation (used), Year of construction: 1999, turning length: 750 mm, turning diameter: 360 mm, spindle bore: 51 mm, control num Multifix turret capacity 750X360MM max spindle speed 2500 rpm Dkjdpfeyhdh Hex Afneh weight 1600KG

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVM50GIRJA/02115, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle Bore 42mm Spindle motor 7.5Kw Width over bedways 318mm Travel cross slide 250mm Travel top slide 100mm Travel tailstock barrel 145mm Taper in tailstock barrel No. 4MT Machine in Imperial execution MACHINE EQUIPPED WITH Newall DP700 2 axis DRO system 3 jaw chuck Quick change toolpost and 3 toolholders Bedstop Lighting Chuck guard Coolant system Dodpfx Ajycg Thefnekh Rear splashguard

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Dksdpfexrf Stsx Afnoh Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: used, Year of construction: 1982, Lathe Schaerer, model UD632 Specifications: - Working height above floor: 1120 mm - Centre height above flat bed: 320 mm - Swing over bed: 660 mm - Swing over cross slide (short): 450 mm - Swing over cross slide (long): 420 mm - Swing in gap: 710 mm - Drive power: 15 / 22 kW - Spindle torque: 3000 Nm - Max. workpiece weight between centres without steadies: 1500 kg - Max. workpiece weight between centres with one steady rest: 2200 kg - Bed width: 460 mm Main spindle: - Spindle head with centring cone: 55022, size 8 - Front spindle bearing diameter: 120 mm - Through spindle bore: 72 mm - In front, taper 1:20: 80 mm - Internal taper: Morse 5 - Speeds: 1.8 – 2240 rpm Carriage feeds (number): 3x32 - Longitudinal feed A, 1:1: 0.07 – 1.12 mm/rev - Longitudinal feed B, 4:1: 0.31 – 4.5 mm/rev - Longitudinal feed C, 24:1: 1.8 – 28 mm/rev - Cross feed A, 1:1: 0.035 – 0.56 mm/rev - Cross feed B, 4:1: 0.16 – 2.24 mm/rev Dsdpfxegbd E De Afnjkh - Cross feed C, 24:1: 0.9 – 14 mm/rev - Rapid traverse longitudinal: 5000 mm/min - Rapid traverse cross: 2500 mm/min Leadscrew: - Pitch: 12 mm - Diameter: 50 mm Thread cutting: - Metric threads (number): 3x32 - Metric thread range A: 1 – 12 mm - Range B: 3.25 – 48 mm - Range C: 21 – 288 mm - Inch threads range A: 24 – 15/8 TPI - Range B: 6 – TPI - Range C: 1 – 1/12 TPI - Module threads A: 0.5 – 6 Mod - B: 2 – 24 Mod - C: 10.5 – 144 Mod - DP threads A: 48 – 3 DP - B: 12 – 1 DP - C: 1 – DP Cross slide: - Width: 310 mm - Cross slide short: 465 mm - Cross slide long: 1000 mm Top slide travel (manual): 150 mm Top slide travel (automatic): 180 mm Tailstock: - Quill diameter: 90 mm - Quill travel: 200 mm Weight (standard version): 3460 kg Year of manufacture: 1982 Special features: - Machine is in very clean condition - Double prism under-bed for high precision - Digital read-out HEIDENHAIN, model ND 780 - Infinitely variable spindle speed! - 3-jaw chuck FORKARDT - Automatic lubrication system - Automatic tool post - Rapid traverse on all three axes - Chip guard - Machine lighting Delivery conditions: - Delivery time: ex-stock, subject to prior sale - Delivery: ex Baarle-Nassau - Payment: prior to collection - Prices: net, excl. VAT Disclaimer: Machinehandel De Leeuw BV cannot be held liable for any discrepancies in the technical data in this offer and the actual machine. Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry and used paternoster systems from brands such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard and automated storage systems like the Kardex Shuttle XP, XPlus and NT systems. Warehouse: Oordeelsestraat 7b, NL-5111 PA Mail address: Postbus 294, NL-5110 AG Baarle-Nassau / The Netherlands Phone: Mobile Antoine: VAT no.: NL800103026B01 CoC Tilburg: 18034279

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor, mounting bracket Dsdpfx Aeygh Unjfnjkh -Milling chuck: SK50 chuck -Type: 50 x 50 x 630 mm -Shaft: Ø 27 mm / Sleeves Ø 40/85 mm see photos -Dimensions: Ø 100 x 835 mm -Weight: 23.5 kg

Condition: excellent (used), Year of construction: 1998, travel distance X-axis: 290 mm, travel distance Z-axis: 1,920 mm, spindle motor power: 11,000 W, 3 chuck ca 400 mm Duplomatic 8 position revolver Steady rest big 400 mm Steady rets normal 300 mm Pinole taper: 6Mk Stroke pinole: 180mm Quill Ø: 95mm Length: 3300mm Width: 1800mm Height: 1700mm Dedpfxeyfd Hwe Afnskh Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, turning length: 450 mm, travel distance X-axis: 135 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 450 mm, C-Axis rapid traverve 400 Min Turret indecing time 0,2 sec for 1 station Dksdpfx Afjydcvzsneh Heavy duty cutting (depth cut 6mm) 162.7 mL/Min LNS Bar feeder new 2017 Large package tooling driven / live tools 8 axis controlled with 2 spindles and turrets Max. turning Ø: 250mm X-Axis: 135mm Y-Axis: 40+40 = 80mm Z-Axis: 450mm B Axis: 510° Spindle bore: 49mm Speedrange: 6000Rpm Spindle power: 30kW Subspindle speeds: 6000Rpm Subspindle bore: 49mm ATC / revolver: 12 Speed live tools: 6000Rpm Positions lower revolver:12 Speed live tools: 6000Rpm Length: 2800mm Width: 2000mm Height: 2000mm Weight: 5000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Center length ----- 750 mm Center height ----- 125 mm Turning diameter ----- 250 mm Passage of main spindle ----- 26 mm Bed width ----- 135 mm Spindle speed ----- variable 30-2200 rpm Frequency motor ----- 1.1 kW INCLUDING * Delta frequency switch * Automatic longitudinal and transverse feed * Thread cutting clock * 3 chuck 125 mm * 4 chuck 125 mm * Clamping plate * Fixed spectacles * Guiding glasses * Back plate * Back plate * Box with various tools Option Dkodoq E I Avjpfx Afnjh * Base cabinet

Condition: good (used), Year of construction: 1963, functionality: fully functional, Single-Column Vertical Turret Lathe | Jungenthal DK 1400 The machine was overhauled in 1996, recently cleaned, and is in good condition. - Faceplate diameter: 1,200 mm - Swing diameter: 1,500 mm - Turning height: 1,300 mm - Cross slide travel: 800 mm - Side slide horizontal traverse: 550 mm - Heidenhain Positip 855 digital readout - New operator panel Dedpfxsyft Ahe Afnskh - Various accessories Inspection is possible at any time by appointment.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 Dksdpoyfurqefx Afnsh The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. - Table diameter: 1,250 mm - Swing diameter: 1,500 mm - Turning height: 1,250 mm - Siemens control system type 840 Dsl - Tool holder Inspection is possible at any time by prior appointment.

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Dkedpfx Asnxi H Uofnjh Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: good (used), Year of construction: 2003, operating hours: 18,538 h, functionality: fully functional, machine/vehicle number: 431, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Dkedpfeyh Ivlox Afneh Upper tool turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Position feedback resolution X/Y/Z: 0.0005/0.001/0.001 mm - Thrust force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Thrust force X/Z: 2,800/2,120 N - Position feedback resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Thrust force X/Z: 4,240/4,240 N - Position feedback resolution X/Z: 0.0005/0.001 mm - Including all tool holders shown in the photos, as well as a chip conveyor and coolant system by Resy, and a bar loader by FNB, model: TURBO 5-42. Attention: The item must be collected bindingly on a to-be-agreed appointment between 01 and 02 April 2026. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: AZ0238, turning length: 400 mm, turning diameter: 250 mm, travel distance X-axis: 180 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,400 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, SPINNER TC 300 52 SMCY CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 35 A - Maximum swing diameter: 300 mm - Y-axis travel: +45/-30 mm Dkjdpfeyh Iryex Afneh Spindle 1: - Maximum speed: 5,000 rpm - Spindle power: 15 kW - Torque: 95 Nm Spindle 2: - Maximum speed: 7,000 rpm - Spindle power: 6/7.8 kW - Turret number of tools: 12 - Tool holder: VDI 25 - Including live tools: 12 - Maximum speed: 6,000 rpm - Including chip conveyor Note: The item must be collected on a binding appointment between 01 and 02 April 2026 to be coordinated. FCA D-79115 Freiburg – loaded on truck

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Dkedpfx Asyft S Aofnoh Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: good (used), Year of construction: 1982, functionality: fully functional, Single-column vertical turning lathe | Dörries VCE 1400 The machine was overhauled in 2010 by Hering, has recently been cleaned, and is in good condition. - Table diameter: 1,000 mm - Swing diameter: 1,400 mm - Turning height: 1,100 mm - Siemens CNC control type 840 D Shop Turn - Tool changer - X-axis travel: 2,000 mm - Z-axis travel: 700 mm - Slide adjustment: 1,000 mm - Rapid traverse: 6,000 mm/min - Spindle speed: 500 rpm - Handwheel - Total power requirement: 62 kW Inspection possible at any time by appointment. #Tags: Doerries | VCE1400 | Dörries VCE Dedpfx Aoyft Nnsfnekh

Condition: excellent (used), Year of construction: 2013, operating hours: 34,000 h, functionality: fully functional, WEISSER VERTOR C-1 L (2013) – Vertical Turning Center with Automation, C-Axis & Live Tooling – SINUMERIK 840D Solution Line For sale is a powerful WEISSER VERTOR C-1 L vertical turning center (year 2013) in excellent, ready-to-run condition. The machine is fully functional and equipped with automation plus a strong configuration for efficient production. The system has been used in an industrial environment for machining shaft/gearbox-related components, including pre-turning and functional turning operations. Thanks to the vertical design, the machine offers very good chip evacuation and high process reliability. Machining capabilities & spindle function (clear explanation) This machine is more than a standard lathe: with C-axis and live tooling, you can perform not only turning operations but also indexed/positioned machining. This enables drilling, cross operations and light milling tasks in one setup—ideal for reduced cycle times and stable part quality. Main spindle / C-axis allows: precise positioning for machining at defined angular locations combined turning + live-tool operations spindle speed up to 6,000 rpm for flexible process setup (depending on part and operation) Djdpfx Afjyhzgdjnokh Technical data (extract) Machine Manufacturer: WEISSER Model: VERTOR C-1 L Year: 2013 Condition: used, ready for operation Functionality: fully functional Machine No.: 1580196 Control: SINUMERIK 840D Solution Line Table / Working area Table diameter: 420 mm Swing diameter: 620 mm Center height: 420 mm Spindle bore: 50 mm Axes / travel ranges X1: 320 mm Z1: 844 mm C1 (spindle): up to 6,000 rpm W1 (tailstock): 1,400 mm X3: 1,500 mm Z3: 509 mm Feed rates Max. axis feed: 24,000 mm/min X3 feed: 60,000 mm/min Z3 feed: 30,000 mm/min Tool interface Tool system: CAPTO C5 Electrical data Supply voltage: 400 V AC / 50 Hz Control voltage: 24 V DC Magnet voltage: 24 V DC Rated machine current: 53 A Main fuse: 100 A slow-blow Dimensions & weights Machine (L x W x H): 2,800 x 2,450 x 2,800 mm Machine weight: 7,500 kg Conveyor/belt unit (L x W x H): 2,150 x 3,200 x 1,900 mm, weight 2,500 kg Chip conveyor (L x W x H): 3,500 x 800 x 1,600 mm, weight 500 kg Safety fences (stacked): 2,200 x 1,400 x 800 mm, weight 250 kg Loader (L x W x H): 2,000 x 1,200 x 3,000 mm, weight 250 kg Measuring unit (L x W x H): 700 x 900 x 1,700 mm, weight 500 kg Hours Spindle hours: 13,000 h Operating hours: 20,000 h Power-on hours: 34,900 h Equipment Automation / loading system Programmable tailstock Live tooling Tool measuring station Chip conveyor and peripherals (see technical data) Inspection / delivery Inspection under power possible by appointment. Machine offered ex-works / self-collection. Availability and handover details on request.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 344, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tooling stations: 12 - X-axis travel: 50 mm Dodsyh Hkzspfx Afnjkh - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Scale resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Scale resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Scale resolution X/Z: 0.0005/0.001 mm - Includes the tool holders shown in the photos, a chip conveyor and coolant system from manufacturer Resy, as well as a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be collected by binding appointment between April 1st and 2nd, 2026, on a date to be mutually agreed upon. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 6060304, overall weight: 10,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 2,400 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i-S, TRAUB TNL 32/7 CNC Lathe - Operating voltage: 400 V - Rated current: 73 A - Maximum fuse: 63 A - Rated power: 46 kW - Frequency: 50 Hz - Main spindle, motor spindle including hollow clamping system - Max. bar capacity: 32 mm - For clamping device diameter: 49 mm - C-axis max. speed: 8000 rpm - Max. stroke: 305 mm Dedjyh Hgcopfx Afnskh - Upper turret X/Y/Z and H-axis: 10 tool stations with dual drive - Lower turret X/Y/Z and H-axis: 9 tool stations with total drive and separate sub-spindle drive - Sub-spindle including partial hollow clamping - Max. clamping diameter: LW 32 mm: C-axis, speed: max. 8000 rpm - Flushing unit mounted on the lower turret - Part length: max. 350 mm - Diameter: max. 32 mm - Incl. chip conveyor and coolant system from manufacturer RESY as well as a bar feeder from manufacturer FNB, type: TURBO 3-36 - Incl. all tools and tool holders shown in the photos Note: The item must be collected definitively between 01 and 02 April 2026 at an exact date to be agreed. FCA D-79115 Freiburg – loaded onto truck

Condition: new, Year of construction: 2025, 0390 mm 610 mm Dkodpfxjw In Epe Afneh 54 mm 330 mm 4000 U/min A1-6 DIN 55026 60 mm 140 mm

Condition: new, The LabTurn 2028 CNC, part of the CNC Slant Bed Lathes category and 2-axis CNC Lathes group, is designed for both CNC training and the efficient production of small workpieces. This compact and mobile lathe combines the functionality of larger production machines with a robust cast-iron inclined bed design, ensuring excellent stability for precise machining. The machine features an 8-station tool turret with four tools each for inside and outside turning and a max spindle speed of 3000 rpm, enabling versatility in various applications. Additionally, the Siemens 808D Advance controller provides an intuitive interface for beginners. The LabTurn includes a 100 mm 3-jaw chuck, hydraulic tailstock, and a well-structured design with an enclosed workspace for safety. Enhance your machining capabilities with the LabTurn and experience the potential for high precision and performance. Request a quote today to explore this superior CNC Slant Bed Lathe. Dkjdpfsuy Iclox Afnsh

Condition: new, The Roturn 402 C, a cutting-edge CNC Slant Bed Lathe, exemplifies the robust performance and precision that KNUTH machines are known for. Incorporating the Siemens 828 D Basic control, this CNC production lathe is designed to meet the demands of modern machining technology. Its inclined bed design coupled with an 8-station tool turret and a powerful 15 kW main spindle motor ensures efficient operation and versatility. The machine can handle workpieces with a maximum turning diameter of 400 mm and length of 420 mm. Moreover, it features a reliable hydraulic 3-jaw chuck with a through-hole and a hydraulically operated tailstock, both key for precise machining. The standard equipment package includes a high-performance coolant system, an automatic central lubrication system, and a hinged belt conveyor to facilitate effective chip removal. With its substantial machine frame and precise linear guides, the Roturn 402 C is engineered for stability and accuracy, even under heavy loads. For those seeking a reliable and efficient CNC Slant Bed Lathe, the Roturn 402 C is an excellent investment. Request a quote today to enhance your machining capabilities. Dsdpeng Ah Rsfx Afnskh

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Turning diameter ----- 360 mm Passage of main spindle ----- 38 mm Bed width ----- 203 mm Spindle speed ----- 45-1800 rpm Motor ----- 2.4 KW Weight ----- 880 kg INCLUDING * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 scoops * 3 chuck 200 mm Dkedpfxsq E Iyze Afnjh * 4 chuck 200 mm * chuck 250 mm * LED work light and cooling system * Fixed and moving guards * Foot brake (CE) * Electric brake (CE)

Condition: ready for operation (used), Lead and feed screw lathe Manufacturer: VDF Model: MA22 Max. turning length: approx. 1000 mm Centre height: approx. 150 mm Spindle bore diameter: 60 mm With 3-jaw chuck, manufacturer FORKARDT, diameter: 200 mm Dedpfxoyfnabe Afnokh Coolant system and Multifix quick-change toolpost

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 4480, turning diameter over cross slide: 570 mm, turning length: 1,500 mm, Cycle lathe Seiger SLZ 570E Dksdpsyfm R Sjfx Afnsh Year of manufacture: 2008 Accessories

Condition: ready for operation (used), Year of construction: 1984, turning diameter over cross slide: 700 mm, spindle bore: 150 mm, turning length: 3,000 mm, turning diameter: 1,000 mm, capacity 3000x1000 mm 2-axis DRO spindle bore 130 mm steadies 4-jaw chuck rapid traverses Djdox Itpbepfx Afnjkh