Used Laboratory Furnace for sale (2,089)

Condition: good (used), KEN 311-OS Laboratory Dishwasher Laboratory dishwashing machine with high capacity The flexible machine for laboratories with high washing needs The KEN 311-OS covers the quality washing needs of laboratories Advantages Washing of instruments in up to 2 levels at once High capacity User-friendly and ergonomically correct front operation Front display with plain text Low noise level Low energy and chemical consumption for the benefit of environment and economy Minimal maintenance and service Specifications: Height 140 cm. Width 60 cm. Iedpfsiuz Dbex Ag Usal Depth 64 cm. Electrical connection 400 Volt 3N 50 Hz Power 10,1 kW Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. More items - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2025, Roller width 350 mm roll diameter 110 mm Roller covering - soft rubber 70 Grad shore rubber NBR - Qualität Pressure line 28 N / mm air pressure max. 4 bar Capacity of dye tub Becken - 1,3 Liter Capacity of dye tub Zwickel - 0,3 Liter Speed driven roll 0-25 U/min speed 1 - 10 m/min voltage 230 V / 50 Hz drive motor 0,4 kW weight 130 kg dimensions 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, Isdsu Dn Uvspfx Ag Uoal • small trough for vertical roller-arrangement, • content: 1.3 litres, • with controllable motor drive, • direct drive to the fixed roll, • by means of wheels the pressure roll is driven when the nip is open.

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Iajdjfbl T Nopfx Ag Uel Heating capacity: 3 KW Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Condition: used, Plasma-nitriding furnace, make Ipsen type: VVPH useable dimensions: ø800 x 1200 (H) mm charge weight: 600 kg gross heating power: 100 kW working temperature: 150 – 600°C PLC: Siemens S5 plasma generator: MAG-Puls QT 800/50/150-UP plasma generator: MAG-Puls was newly acquired in 2008 Iasdpfxoxc D E Ho Ag Uol

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small bars with dimensions from 10x10 to 22x22 mm and lengths up to 300 mm. The loading feeder sorts the workpieces and automatically loads the inductor with each item for heating. The throughput is very high. For small components, heated parts at up to 1100 degrees are available every 6 seconds. Two inductors are included for heating materials of up to 20mm and 16mm in thickness. The furnace can be adapted to suit your specific requirements. The cost of replacing the inductor with models for different sizes is around 3,000 EUR. The machine is highly versatile regarding the size of products to be heated. Capable of heating flat bars, round bars, or square bars. Iasdjw Hqldopfx Ag Uol The complete machine consists of a generator, induction furnace with inductor, bar feeder, and chiller.

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Iajdpfxoxcybko Ag Usl Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: good (used), TDK GEN20-120-1P230, TDK-Lambda 19 inch laboratory power supply unit 44 mm housing 0 - 20 V/DC / 0 - 120 A Switched Input voltage range 85 - 265 V/AC Integrated RS-232 / RS-485 interface External analog programming and monitoring Iedpfjk Uuh Tox Ag Ueal Design (general): Rack-mountable Item condition: Used, in perfect condition R11B1_EK More laboratory power supplies - new and used - you can find in our store! International shipping costs on request!

Year of construction: 2025, condition: as good as new (ex-display), SERVOCUT 302-MA Automatic abrasive cutting machine - programmable with 7" touch screen operating panel with SIEMENS-PLC control - automatic moving table + manual chop cut (other types available) - cutting machine for a variety of different programmable cutting processes - programming of cutting parameters via LCD display - precise and motorized positioning of the sample in X - Y and Z axis - integrated moving table control with force-dependent adjustable infeed speed - variable cutting force, mode for pulse cut, overload protection of the drive motor - compact engine 2,800 rpm cutting disc speed - electronic braking system - cutting capacity up to 110 mm solid material (with cut-off wheels Ø 300 mm) - double, split (left/right) stainless steel T-slot table - floor assembly made of solid die-cast aluminum - incl. 80 l circulation cooling system complete with connection hoses - delivery ready for operation (without clamping devices) - power supply 400 V / 50 Hz, 3 phases with neutral 16 A back-up fuse Iajdocw Ipaepfx Ag Usl - delivery including test equipment Consumables consisting of: * Assortment of 20 cutting discs with 300 mm diameter * 5 litre METCOOL coolant liquid

Year of construction: 2024, condition: new, functionality: fully functional, Convection baking oven Powder furnace new SLS - 90 / O * D + t Transit oven divisible Iedpfx Agocutrlo Usal Memorized 1400 wide x 2000 height x 6500 depth Dimensions 1920 wide x 2810 height x 6800 depth Electric power supply Rated power 90 kW Voltage 380V Frequency 50-60 Hz Door type: 2 doors on either side - passage oven Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Homogeneity < ± 3 ° C, if 180 ° C Max < ± 3 ° C Temperature of 230 ° C Max Transport: selectable Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Door double two doors on two sides (Durschlaufofen) Divisible Motor 1,1 kW 6480 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Delivery time approximately 12 to 16 weeks after ordering Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating, Jauhemaalaus, muovijauhetta, Peinture en poudre, thermoplastique, Verniciatura a polvere, Poederlakken, Порошковая окраска, Порошкове фарбування gemapulverbeschichtungskabine Powder coating plant Powder coating plant Powder coating cabin for powder coating Surface technology Powder gun Powder guns Einbren

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C Iedpfx Aeclupdog Ujal max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Condition: excellent (used), Mesdan Lab Knitter 294E Single-Cylinder Laboratory Knitting Machine High-precision single-cylinder laboratory knitting machine For the production of tubular knitted fabrics Mechanism for regulating fabric count Automatic oiling system Ergonomic control panel Electronic yarn length meter Variable speed control via potentiometer LED displays for monitoring machine functions Technical details: Dimensions: (LxWxH) approx. 850 x 450 x 1,750 mm Number of needles: 112 pcs Needle gauge: 0.24 mm Counting range for filaments: 400 ... 2,000 dtex Counting range for spun yarn: 8 ... 12 nne Iajdpouuh Hxofx Ag Uol Supply voltage: 230 V Rated current: 1100 W Frequency: 50 Hz Weight: approx. 130 kg Product video More Find items – new and used – in our shop! International shipping costs upon request!

Condition: used, El. heated pit furnace, make Borel Iasdpovv Tk Aofx Ag Usl type: 6-72 temperature: max. 1050°C connected load: 90 kW clear ø: 850 mm clear height: approx. 2150 mm without lid and control cabinet

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Ijdpfsim Ik Sjx Ag Ujal Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Condition: used, El. heated pit furnace, make Borel with air circulator type: 11.85 temperature: max. 550°C connected load: 5 kW clear ø: 300 mm clear height: approx. 570 mm Iaedpfx Asvv Sw Isg Uel without control cabinet

Condition: good (used), KEN 211-OS Laboratory Dishwasher High-capacity laboratory dishwasher The flexible machine for laboratories with high dishwashing requirements The KEN 211-OS meets the need for quality washing in laboratories. Advantages Washing of instruments on up to 2 levels High capacity User-friendly and ergonomically correct front operation Front display with plain text Low noise level Low energy and chemical consumption for the benefit of the environment and the economy Minimal maintenance and upkeep Specifications: Height 140 cm Width 60 cm Depth 64 cm Electrical connection 380 volts 3N 50 Hz Power 6.6 kW Iedpfxjiu Uras Ag Usal Item condition: Condition: Used Find more items - new and used - in our online shop! International shipping costs upon request!

Year of construction: 2018, condition: new, Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550ᵒC Iodpfxedt R Uuj Ag Usal useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

Condition: good (used), Roaches 3 bath laboratory dyeing machine Roaches 3 bath laboratory dyeing machine 400 V 6600 W Iodpfxjuzhqrj Ag Usal 10 A HxWxD= 920 x 1760 x 450 mm Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2015, condition: new, rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200 ° C heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds Iasdpfxscmxzie Ag Uel - charge box - measuring and control system

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Iasdpfx Ageu D E A Dj Uol Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Gas chamber furnace Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) More articles - new and used - can be found in our shop! Iedpod Spx Dofx Ag Uoal International shipping costs on request!

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With exhaust system and table Upward opening door keeps hot surface away from user Soft self-closing door (for 5, 13, 21 & 23 liter models) Standard start delay and process timer function Durable aluminum oxide support plates for the heating elements; sturdy door surround and base plate High quality fiber insulation with low thermal mass Powerful heating elements on both sides provide very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing Iajdpfx Aopygpfeg Uol Further articles new and used - you will find in our store! International shipping costs on request!

Condition: good (used), KEN 2311-HOS Laboratory washer-disinfector KEN 2311-HOS is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and double-door (pass-through) models. Pass-through machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. Iaodjiuzkmepfx Ag Uel ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), KEN 2311 Laboratory washer-disinfector KEN 2311 is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Iaodpeiuzlvefx Ag Uel Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instruments to test the unit further and Therefore, this unit is being sold as it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Glasbeek finish   Gas Poederwand chamber oven  Iajdpfod Szzgjx Ag Usl Maximum temperature 250°C Electrical connection 8 kW 51 KW 3x400V Year 2003 Approx. internal dimensions W120cm x D300cm x H139cm with loading trolley (L280 x W102 cm) Approx. external dimensions LxWxH approx. 380x220x305 cm

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Isdpfod Srlrex Ag Ujal Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts 41 kW More articles - new and used - can be found in our shop! International shipping costs on request!