Used Kaltenbach Kks for sale (107)

Condition: good (used), Sawcapacity at 90 degree: Round: Ø303 mm, Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm, Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm, Square WxH: 175 x 300 mm Sawingspeed: 20 - 90 m/min. Sawbelt dimensions: 3830 x 25 x 0,9 mm, 3850 x 27 x 0,9 mm Tedpfx Asugtqrehuof Workingheight: 700 mm Featured with: - Mitre sawing - Half automatic - Materialrollerconveyor ca. 8 meter - Machine manuals Country of origin: Germany Motor power: 1,1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

Condition: used, Year of construction: 1990, machine/vehicle number: AGH597, 1x Mobile Pillar Slewing Crane, Travelling Crane Type: WK1 - Year 1990 Load capacity at full outreach: 250KG / 0.25t Construction height: approx. 3.45m, outreach: approx. 2.5m Hook height: approx. 2.8m, lower edge of jib: 3.25m Base size: approx. 110x110cm Pillar with counterweight incl. ABUS 250kg GM chain hoist (year 2023), plus cable trolley and accessories Total weight approx. 3300kg (counterweight approx. 3000kg) Connection: 400V, slewing range: 270° Tedpfxjxdvlho Ahuef Used condition, fully functional. Item location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale. See photos Shipping via freight forwarder or pickup

Condition: good (used), Year of construction: 2000, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Tjdpfxow Rz Shj Ahujf Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm

Condition: used, Column-mounted semi-automatic bandsaw METORA - KALTENBACH type HMB 380 DS only for 90° cuts (Made in Austria) Machine. No. 4580028 Year of construction approx. 1993 Cutting area round Ø 380 mm Square 380 x 380 mm Saw blade dimensions 5650 x 34 x 1.1 mm Saw blade speed 25-108 m/min. infinitely variable Material infeed height 870 mm Hydraulic drive power 1.5 kW Saw motor drive power 4 kW Mains connection 400 Volt, 50 Hz - Fully hydraulic band saw in two-column design Tjdjdzqtgspfx Ahuef - Hydraulic saw arm lowering with infinitely variable cutting pressure adjustment - Infinitely variable lowering speed - Hydraulic vice clamping, bundle clamping - Hydraulic unit integrated in the machine base frame - Material feed roller on the infeed side with geared motor - Coolant unit with cooling lubricant pump for water emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for cooling water and hydraulics - TRENNJAGER type EX-Stop1 cross-cut fence, with handwheel adjustment, digital display and hydraulic fence carriage clamping Fence overall length 6750 mm, fence travel 5650 mm, fence arm can be folded up hydraulically without roller conveyor Space requirement of the basic machine L x W x H 2800 x 1400 x 2450 mm Weight of the machine approx. 3 tons Weight of the stop system approx. 800 kg good condition

Year of construction: 1996, condition: used, Used band saw Kaltenbach , model HMB 360 Technical data: Cutting diameter 90: 305 mm Cutting range at 90 degrees: square: 360x305 mm Cutting range at 45 degrees: round: 265 mm Cutting range at 45 degrees: flat: 265x305 mm Cutting range at 60 degrees: round: 175 mm Cutting range at 60 degrees: flat: 175x305 mm Table height: 700 mm Saw blade dimensions : 3830x27x0.9 mm Belt speed: 16-100 m / min Dimensions LxWxH: 2300 x 1450 x 1650 mm Total power requirement: 380 V , 1.1 kW Machine weight approx .: 780 kg Year of Build: 1996 Schnittbereich bei 90 rund: 305 mm Schnittbereich bei 90 flach: 360 x 305 mm Schnittbereich in Gehrung bei 45 rund: 265 mm Schnittbereich in Gehrung bei 45 flach: 265 x 305 mm Schnittbereich in Gehrung bei 60 rund: 175 mm Schnittbereich in Gehrung bei 60 flach: 175 x 305 mm Sgebandabmessungen: 3830 x 27 x 0,9 mm Sgebandgeschwindigkeit: 16 - 100 m/min Platzbedarf: 2300 x 1450 x 1650 mm Sgeantrieb: 380 V, 1,1 kW Weight : 780 kg Baujahr: 1996 Price of band saw machine Kaltenbach..... on request via e-mail Delivery conditionsDelivery time: from stock, t.v.v. Delivery: ex Baarle-Nassau Payment: for pick-up Prices: are net, excl. V.A.T. Technical details: changes under reserve Machinehandel De Leeuw BV can not be held responsible for differences in technical details in this offer and the actual machine Machinehandel De Leeuw BV is specialized in used machines and Tedpfx Aegbd Egohusf

Condition: used, Year of construction: 1972, 1 used, well-preserved hydro-pneumatic semi-automatic cold circular sawing machine for cutting aluminum, non-ferrous metals, wood and plastic Technical data: max. saw blade diameter 370 mm Cutting diameter 120 mm Cutting range at 90 degrees: flat 260 x 60 mm Cutting range at 90 degrees: square 105 mm Cutting range at 45 degrees: flat 200 x 45 mm Cutting range at 45 degrees: square 90 mm 0° cut - longitudinal cut: yes 2 speeds 1500 / 3000 m/min Drive cable 1.7 / 2.6 kW Machine dimensions L x W x H 1000 x 1000 x 1700 mm Machine weight 700 kg Accessories / Special features: - Semi-automatic operation: After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released. - Stepless feed - Pole-changing motor - 1 saw blade - Mitre cut on both sides - Longitudinal cut 0° - Spray lever device Special accessories: - 1 roller table right with heavy stop 3500 mm and scale - 1 roller table left, approx. 3500 mm Special accessory price: € 1,500.00 plus VAT. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Tedebwl Emjpfx Ahuof DE - 44143 Dortmund - Wambel

Year of construction: 2009, condition: used, machine/vehicle number: 0301-230036, Kaltenbach drill saw system as a combination for use in light to heavy steel construction. With this Kaltenbach system, steel profiles can be drilled, center-punched and sawn to length in a single operation. Rolled profiles such as double T-steel, T-steel, U-steel, angle steel, hollow profiles and flat steel are processed here. The Kaltenbach drilling unit has an automatic tool changing device on three drilling spindles for five tool sizes each. The tools are positioned with high precision using ball screws and servomotors. The entire system is equipped with a length measuring device. Technical information KDXS 1215 drilling machine: - Working area min. 80 x 65 x 10 mm Todpjrr Sq Nofx Ahuef - Working area max. 1200 x 450 mm - 3 drilling units (vertical Y-axis, horizontal Z- and W-axis) each 11.0 kW frequency-controlled: 33.0 kW - Automatic tool changer (3x5) - Frequency-controlled drive power 78 kW - Working height 640 mm - Machine dimensions 6100 x 1300 x 3730 mm (LxWxH) - CNC control with Profiline 3 software Kaltenbach HDM 1432 High-performance circular saw as vertical saw with swivel bearing for high sawing performance of medium and heavy steel profiles, working area at 90° saw cut: 1200 x 450 mm, mitre adjustment for mitre cuts of -45°/90°/+35°, this circular saw system is equipped with a segment saw blade diameter 1430 mm. High cutting performance thanks to powerful drive NC-controlled cutting angle adjustment Feed via ball screw for ideal cutting results and short idle times

Condition: like new (used), Year of construction: 2018, machine/vehicle number: AGH631, 1x Mobile Column Slewing Crane, Traveling Crane Type WK1 - Year 2018 Load capacity at full outreach: 100 kg / 0.1 t Overall height: approx. 3.65 m, Outreach: approx. 4.7 m Hook height: approx. 3.1 m, Lower edge of jib: 3.4 m Base size: approx. 110x110 cm Including trolley with drawbar!!! Column with counterweight incl. ABUS 100 kg GM chain hoist, cable drag chain, and accessories Total weight approx. 3500 kg (Counterweight approx. 3300 kg) Connection: 400V, slewing range 270° Very good condition, almost as new, fully functional. Item location: 75053 Gondelsheim Todpfxoxdvfus Ahuef Only the crane system shown in the pictures is being sold See pictures Shipping by freight carrier or pick-up

Year of construction: 1983, condition: used, Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw Tsdpfxsd Ixn Re Ahujf -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

Condition: good (used), Year of construction: 1976, Semi-automatic cold circular sawing machine Tjdpfeqxamgox Ahusf KALTENBACH Type : MSK 400 Year 1976 with roller table. Cutting range Round mat. max: 135 mm Flat mat. max : 200 X 80 mm Machine in good condition, operating instructions available.

Year of construction: 1994, condition: used, Max. saw blade diameter: 350 mm Manual material tensioner minimum quantity spraying Digital angle display Tsdpoud Uvksfx Ahusf

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, drill diameter: 32 mm, product height (max.): 330 mm, product height (min.): 5 mm, product width (max.): 625 mm, product width (min.): 35 mm, rotational speed (max.): 1,600 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: CNC drilling system for wide flange beams & welded double-T profiles Working area: 35 x 5 - 625 x 330 mm Drilling data Drilling spindles vertical Y / horizontal Z+W: 1 / 2 pieces Drilling diameter (HSS): 6 - 31.75 mm Drilling length: 130 - 290 mm Drilling stroke: 120 mm Spindle speeds: 200 - 1,600 rpm Rapid forward/reverse: 10,000 mm/min Drilling feed: 20 - 160 mm/min Rapid positioning: 10,000 mm/min Tool change Tool change: manual Tool holders (3 x 1): 3 pieces Drive power 3 drilling drives: 5.5 kW (frequency controlled) Total power: 16.5 kW 6 positioning drives: 0.75 kW Total power: 4.5 kW Working environment Working height above floor: 640 mm Transport system Cross transport on the feed side: 6 liftable conveyor chains, depth: 3.6 m Feed roller conveyor: length 12.1 m for material Discharge roller conveyor: length 6.1 m for material Cross transport on the discharge side: 4 liftable conveyor chains, depth: 4.6 m Automation module: for feed and discharge side MACHINE DETAILS L x W x H (without accessories): 3,050 x 1,300 x 2,200 mm Operating voltage: 400 V / 50 Hz Connection: 3 phases + earth Supply line fuse: 35 A (slow) Power consumption (max.): 16 kVA Power consumption (nominal value): 13 kVA / 25 A Todpfovzp Uzjx Ahusf Compressed air & air consumption Compressed air connection: 6 - 8 bar (customer-side for air cooling) Air consumption: 250 l/min at 6 bar EQUIPMENT - Profile beam drilling machine KDE 603 DSTV+ module for nested reading - Miter band saw machine KBS 620 DG - Cutting monitoring system - Length measuring device model: M 120 PP - Transport system T12 - Safety barrier

Condition: used, saw blade diameter 370 mm cutting range round 115 mm cutting range square 105 mm cutting range flat 70 x 240 mm cutting length min. 730 mm cutting lenght max. 4000 mm saw blade turning speeds 1250 / 2500 U/min table rotating 180 ° stroke 120 mm feed stepless 0 - 500 mm/min coolant capacity 45 degrees: square 95 mm capacity 45 degrees: flat 50 x 200 mm cutting speed 1250 / 2500 m/min weight of the machine ca. 1,1 t Tjdpfod Il A Iox Ahusf dimensions of the machine ca. 5,00 x 1,30 x 2,00 m Double Mitre Saw for aluminium consits of two SKL 370 Circular Saws on common rails, one saw fixed one saw movable. - Serial No.: 28232 / 28233 - pneunatic clamping of workpiece - coolant equipment

Year of construction: 2007, condition: ready for operation (used), Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible. Tsdpfx Aewa Tilshuef

Condition: good (used), Year of construction: 1992, cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW Tedpfxjr R Abpe Ahuof -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg

Condition: ready for operation (used), Kaltenbach SKL light metal circular saw 380 Volt Tjdpfx Aogfb Hkehuef saw blade diameter 350mm mitre left+right 30 fence adjustable

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 460 mm, cutting range round steel at 90°: 150 mm, working height: 1,030 mm, MSK 471 NA automatic straight cut circular saw Tsdpfx Aeubbw Ajhujf for HSS and carbide saw blades Cutting range round up to 150 mm, square up to 140 mm Suitable for almost all profile shapes and solid material Automatic cut-off sorting by means of cut-off gripper Machine tested at KALTENBACH, wear parts replaced

Condition: used, Year of construction: 2005, machine/vehicle number: 0102-250005, Kaltenbach KBS 851 DG Miter Band Saw Tsdpfowlz Iysx Ahusf The Kaltenbach KBS 851 is a powerful double-edged miter band saw for precise and efficient cuts in steel profiles, pipes, and solid material. This miter band saw, equipped with the Kaltenbach T13 transport system, is ideal for use in steel trading or steel construction. The machine is in very good used condition and has been regularly serviced by Kaltenbach.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. Tedpohzbipsfx Ahujf - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: ready for operation (used), A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible. Tedowt Tkvopfx Ahusf

Condition: good (used), Year of construction: 1989, KALTENBACH KSS 400, year of manufacture 1989, serial number 111155 Tsdpfx Ahjwyw S Rouof

Condition: good (used), Year of construction: 1997, Semi automatic Aluminium circular saw, blade Ø 350 mm, capacity Ø ca. 125 mm, motor 3,7 / 4,5 kw 2-speed 1420/2880 rpm, vertical clamp, stops 30°, 45°, 60° 90° double side, blade; dimension 100x115x155 cm, weight ca. 600 kgs Tjdpotqfvyofx Ahusf

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Square material 20 - 80 mm DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Tedpfjh Uqpvex Ahuef Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!

Year of construction: 2010, condition: used, machine/vehicle number: 0302-250004, Kaltenbach KBS 1010 - KDS 1015 drilling and sawing system, built in 2010 Tjdpfx Aev Rmnkshuef The Kaltenbach drilling and sawing system is a combination of a Kaltenbach KBS 1010DG double-cutting miter band saw and a KDS 1015 profile beam drilling system.

Condition: ready for operation (used), Saw blade diameter: 450mm, cutting width: 4mm, saw blade type: HM/HSS, mounting hole: 50mm, fastening screws: 4, pitch circle fastening screws: 80mm, screw diameter: M12. Saw blade feed speed: 3.5m/min, rapid return: 4.5m/min, feed speed: 10m/min/20m/min, cut-off length single stroke: 10mm/1000mm, double stroke: 2000mm, turntable tilt: +/-90°. Machine dimensions X/Y/Z: approx. 2700mm/1450mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Todpfxjv Hgkqj Ahuof