Used Heckert Fss 315 for sale (86)

Condition: used, Universal milling head, milling holder, milling extension, angle milling head Ijdpfxsgxcuqs Aagjat -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg

Condition: used, Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm Iodpfed Nz Dpox Aagsat -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Year of construction: 1983, condition: good (used), Machine number: 316204/22 Type / Model: FSS 315/E Travel x-y-z: 850 - 280 - 355 mm table: 1.200 x 370 mm clamping surface: 1.060 x 260 mm Speed range: 28 to 1,400 rpm spindle mount: SK 50 quill stroke: 80 mm Feed rates x and y axis 16 to 800 mm/min feed z-axis: 5 to 250 mm/min Connection: 8 kW Accessories/equipment: Swivel head; condition: good Weight: 4 t Dimensions: 2.000 x 2.000 x 2.400 mm Iasdpofli Afofx Aagjt

Condition: new, functionality: fully functional, Spare parts for Fritz Heckert milling machines F315, F400 - even for the oldest ones. We offer a full range of spare parts for milling machines – the old and new German WMW HECKERT milling machines F315, F400, FSS-350MR, FSS-400MR, FU-350MR, FU-450MR, FU-350ApUG, FU-450ApUG, FU-350MRApUG, FU-450MRApUG. Iodsvtnfpjpfx Aagjat In our stock one can find: milling machine head and all gears for it, dividing heads, lunette/rests, all electromagnetic clutches and brakes, shafts, bevel gears, worms and worm gears, pulleys, levers, longitudinal and cross screws, nuts, oil pumps, cooling pumps, spindles, quills, hydraulic dividers/distributors etc. All the original parts for Heckert milling machines we can offer directly from stock, ready for immediate shipment. All parts are new, executed in German quality, and meet the highest technical standards.

Condition: excellent (used), functionality: fully functional, Fully functional milling machine, in good working condition – has seen limited use in a small in-house mechanical workshop. Technical data: Working system and travels (XYZ axes): • Table surface: 1600 × 400 mm (extended versions available: 1800/2000 mm × 400 mm) • Longitudinal travel (X axis): 1120 mm • Cross travel (Y axis): 400 mm • Vertical travel (Z axis): 430 mm (mechanically driven to 400–410 mm) • Maximum table load: 1500 kg • Number of T-slots on table: 5 slots, width 18 mm, spaced 63 mm apart Spindle and milling head: • Spindle taper: ISO 50 / SK 50 • Spindle speed range: 28 – 1400 rpm (standard: 18-step adjustment) • Spindle quill stroke: 100 mm • Vertical head rotation: ±45° right/left • Distance from spindle axis to column: 450 mm • Distance from spindle nose to table: min 70–100 mm / max 500 mm Feed rates: • Feed in X and Y axes: 16 – 800 mm/min (18-step adjustment) • Feed in Z axis: 5 – 250 mm/min (18-step adjustment) • Rapid traverse speed (X/Y): 3150 mm/min Iaodey Sgfdjpfx Aaget • Rapid traverse speed (Z): 1000 mm/min Motors and electrical supply: • Main motor (spindle) power: 11 kW • Total power consumption: approx. 14.5 kW Dimensions and weight: • Machine weight: approx. 4000 kg • Working width/span: approx. 2000 mm • Working depth: approx. 1700 mm (with full table movement approx. 2900–3500 mm) • Machine height: approx. 2700 mm Standard features and functions: • Mechanical/automatic tool clamping: allows quick ISO 50 tool changes without physical force. • Centralized lubrication system: automatic oil supply for guideways.

Year of construction: 1996, condition: ready for operation (used), Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315 x 12. 8) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible. Iajdeyyy Nrjpfx Aagst

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: WMW Heckert, rotary table type D 315 k TGL 28561/02 -Clamping surface: O 315 mm Ijdpjg Rczfofx Aageat -Height: 140 mm -Groove: 14 mm -Dimensions: 615/540 / H150 mm -Weight: 83 kg

Condition: good (used), functionality: fully functional, Technical data (according to nameplate): • Manufacturer: Heckert Werkzeugmaschinen GmbH • Model: FU 315 • Year of manufacture: 1997 • Machine no.: 19019 • Temperature range: +5 to +35 °C • Total weight: approx. 3.1 t • Made in Germany Equipment / Features: • Universal milling head • Infinitely variable or widely graduated feeds (see diagram on the machine) • Coolant system • Electrical control cabinet (clearly arranged) Iasdpfx Aeymd Ideagot • Digital display (see photos) • Heavy-duty machine construction • Very quiet operation

Condition: good (used), functionality: fully functional, Equipment & Features: • Universal milling head • Mechanical feeds • Digital position display Mitutoyo KA-200 (3 axes) • Solid cast iron construction • Classic, user-friendly controls • Electrical system and control by Schiffselektronik Rostock • Original Heckert nameplates available Technical Data (according to nameplate, excerpt): • Mains voltage: 380 V • Frequency: 50 Hz • Rated power: approx. 2.2 kW • Feeds adjustable • Machine weight: approx. 3.2 t Iasdpfx Aasymdwlogst

Condition: good (used), Technical Data (according to nameplate): • Power type / Frequency: 3~ / 50 Hz • Rated voltage: 380 V • Control voltage: 220 V • Connected load: approx. 8 kW • Rated current of machine: approx. 19 A • Fuse protection: 50 A slow-blow Equipment / Features: • Universal milling head • Feeds in X, Y, and Z axes • Original control panel • Sturdy cross table • Coolant system • Very heavy-duty and durable construction • Ideal for steel, aluminum, and plastics Iaedpfxjymdu Ro Aagst

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min Iasdpfx Aaju Ndf Ijgjt total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, The machine tool undergone a general overhaul, which included the repair of the mechanical part, the electrical part and the derivation of the geometry in accordance with the Technical Acceptance Conditions (WOT) and EN. The machine is adapted to the minimum requirements for occupational health and safety requirements. Basic technical data: table working area: 400x1600 mm spindle taper: ISO 50 Iedpfxourvl Ro Aageat longitudinal travel: manual/mechanical 1150/1120 mm cross travel: manual/mechanical 370/345 mm vertical travel: manual/mechanical 430/400 mm maximum angle of rotation of the vertical head: +/- 45 stopni spindle speed range: the smallest 28 rpm, the largest 1400 rpm main motor: 11 kW The milling machine has a mechanical tool clamp that allows the operator to automatically clamp the tools in the machine. The machine has been equipped with a central lubrication system and optical rulers (optical scales) for digital reading of the position in 3 axes. Machine is ready for inspection in central Poland.

Year of construction: 1988, condition: used, tool adaptor SK 40 Ijdpfoipyx Esx Aagjat weight 165 kg Type Uni. 0 Universal type milling head with SK 40 spindle of a milling machine Heckert FU 315.

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished Iaedpfx Aaeu N Dz Asget -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,956 h, functionality: fully functional, machine/vehicle number: 17211, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller model: Siemens Sinumerik 840 D solution Line, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis travel: 650 mm Isdpfxjy Nbt Dj Aagjat Y-axis travel: 650 mm Z-axis travel: 680 mm Table width: 400 mm Table height: 30 mm Table length: 500 mm Table load capacity: 500 kg Max. workpiece height: 850 mm Max. pallet load: 500 kg Pallet changer: 2 pallets, automatic Change time: approx. 8 s Tool magazine: 60 tools Spindle speed (max.): 18,000 rpm Spindle motor power: 32,400 W MACHINE DETAILS Control system: Siemens Sinumerik 840 D Solution Line Dimensions & Weight Dimensions (L x W x H): approx. 5,150 x 2,800 x 3,025 mm Weight: approx. 12,800 kg Noise emission: 80 dB(A) according to EN ISO 3744 Coolant supply: 80 bar Operating hours Total operating hours: 27,412 h Automatic operation: 11,155 h Spindle hours: 9,956 h EQUIPMENT Documentation/manual Chip conveyor Siemens spindle diagnostics & remote diagnostics (Teamviewer) Energy-efficient system with regenerative feedback Standby mode for energy savings Direct drive NC rotary table 6-channel clamping hydraulics (90 bar) Increased spindle torque for high-performance machining Torque support Central coolant supply system Renishaw OMP60 optical touch probe Tool breakage control Pallet sequence operation Crane infeed/outfeed software Signal light for operating states Work area/machine equipment: shower nozzle, cleaning pistol, vortex nozzle, emission extraction interface Foot switch for air nozzle Documentation: fully digital (PDF)

Condition: excellent (used), Year of construction: 1990, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, Length:3500mm Iaodex Hwl Dopfx Aaget Width:1750mm Height:350mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 680 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 37,000 W, number of slots in tool magazine: 80, tool weight: 25,000 g, number of axes: 4, These 4-axis Starrag Heckert HEC 500 H/V were manufactured in 2008 and 2009. They features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 680 mm. The second machine features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 650 mm, and Z-axis travel of 680 mm. The machines include a pallet size of 500 x 500 mm and a maximum load per pallet of 1000 kg. If you are looking to get high-quality machining capabilities, consider these Starrag Heckert HEC 500 H/V horizontal machining centres we have for sale. Contact us for further details. • Package: 2 horizontal machining centers + shared pallet storage system • STARRAG HECKERT HEC 500 H/V (2008) • Control: Siemens SINUMERIK 840D Powerline • Head: Swivelling H/V head (Horizontal/Vertical) • Pallet size: 500 x 500 mm • Travels: X 800 mm / Y 800 mm (vertical position) / Z 680 mm • Rapid traverse: 60 m/min • Spindle power: 37 kW • STARRAG HECKERT HEC 500 H (2009) • Control: Siemens SINUMERIK 840D Powerline • Pallet size: 500 x 500 mm (DIN 55201) Iajdpfoy Rr Axjx Aagot • Travels: X 800 mm / Y 650 mm / Z 680 mm • Rapid traverse: 60 m/min • Spindle torque: 82 Nm • Max. tool weight: 25 kg • Max. tool diameter: 80 mm (160 mm with free adjacent places) • NC rotary table (B-axis): 360,000 x 0.001° • Note: Tool breakage detection system is out of service Additional equipment • Fastems FPC 1500 Linear Pallet Pool (shared by both machines) • Automation: Both machines connected to the Fastems FPC 1500 LPP • For HEC 500 H (2009): • Coolant system with paper band filter • Internal coolant supply, 50 bar • Chip conveyor Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 18275, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine from the production of high-precision components for CNC rotary tables. No contract manufacturing. TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 650 mm High-speed spindle – max. speed: 15,000 rpm Spindle taper: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control unit: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer + storage tower with 6 slots for up to 8 pallets Note: The machine was decommissioned by a qualified electrician and professionally prepared for transport. Iajdpfx Asy Rmz Aeagjt

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 18234, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 15,000 rpm, No reserve price – guaranteed sale to the highest bidder! Machine from the production of high-precision components for CNC rotary tables. No contract manufacturing. TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 650 mm Travel Z-axis: 650 mm Iodsy Rmnvspfx Aagsat High-speed spindle – max. speed: 15,000 rpm Spindle taper: HSK-A63 Through-spindle coolant possible Tool magazine capacity: 120 positions Circular accuracy: 5 µm MACHINE DETAILS Control: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Double pallet changer Note: The machine was decommissioned by a qualified electrician and professionally prepared for transport.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,300 mm, table load: 2,000 kg, Travel Paths Travel path X: 1450 mm (longitudinal) Travel path Y: 1100 mm (vertical) Travel path Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg Spindle & Drives NC rotary table with direct drive Positioning: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool Changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Accessories: - Coolant through spindle - Coolant shower Isdpoy Idykofx Aagjat - Tool breakage detection in tool changer - Spindle motor load monitoring - Spindle extension by 100 mm - Electronic handwheel - Various tools

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Ijdpfoy Rgm Eex Aagoat Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: excellent (used), functionality: fully functional, Description WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Iasdpfx Aajy Rgl Uogjt Specification: Workpiece diameter over: - Bed: 500 mm - Saddle: 250 mm Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Main drive: 4.0 kW Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg

Condition: excellent (used), Horizontal Gear Hobbing Machine Manufacturer: WMW HECKERT Model: ZFWVG 250x2000 Iaodpfsyr S Upox Aaget VEB Fritz Heckert ZFWVG 250×2000 Max. workpiece length: 2,000 mm Max. workpiece diameter: 250 mm Accessories: second milling head, hobs for various modules, steadies, clamping devices, etc.

Condition: refurbished (used), functionality: fully functional, -KOM 3180- Offered here is a fully overhauled motor spindle, type HSK-A-100, from Starrag Heckert AG. The spindle underwent comprehensive maintenance and testing in 2013 (test reports can be provided upon request). During inspection, no anomalies outside the tolerance range were identified. Furthermore, components such as seals, operational noise, and air circulation were thoroughly examined. The spindle is packed in a wooden crate and is ready for transport. The original purchase price of this spindle was approximately €80,000. Technical specifications: Manufacturer: Starrag Heckert Type: HSK-A-100 Spindle type: Motor spindle Material: Metal Max. speed: 15,000 rpm Clamping force: 47 kN (target range: 45–55 kN) Iedpfxsy H Hyds Aageat

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel Iasdpfxohv A A De Aaget - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition