Circular saw for light metal & aluminium

KALTENBACH SKL 400

Condition: used, Length of infeed table: 6000mm, length of outfeed table: 4300mm, length: 2400mm, width: 1300mm, height: 1800mm, with saw blades and length stop as accessories and documentation, was not regularly maintained, without maintenance reports, no known defects. Tedpfsz D S D Dsx Aa Ijc

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M - 2 saw heads Tjdpfx Aasucuhdj Iec - max. saw length 5000mm

Condition: used, saw blade diameter 400 mm cutting diameter 135 mm capacity 90 degrees: flat 280 x 70 mm capacity 90 degrees: square 120 x 120 mm capacity 45 degrees: flat 210 x 55 mm capacity 45 degrees: square 105 x 105 mm turning speeds max. 3000 U/min saw-blade dia. 400 x 3,2 x 40 mm motor 400 Volt total power requirement 4,0 kW weight 650 kg range L-W-H 910 x 1200 x 1700 mm Furnishing: Tsdpfxjxabg As Aa Isc - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

Year of construction: 1986, condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pneumatic material clamping devices with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm Tedpfxsg A Rgfo Aa Isc - Weight approx. 600 kg

Condition: new, Tube cutting aluminum circular saw / Undercut saw AC 550 Special equipment included in the price: Pneumatic vertical and horizontal clamping using 4 clamping supports Infinitely adjustable feed rate of the saw blade Minimum quantity lubrication 3m roller conveyor Description Saw blade diameter: 550 x 32 x 4 mm Speed: 3580 rpm Cutting range 90° rectangular: 260 x 200 mm Tjdpfx Aekckx Uoa Ioc Cutting range 90° square: 155 x 155 mm Cutting range 45° rectangular: 180 x 200 mm Cutting range 45° square: 130 x 130 mm Operating pressure: 6 - 8 bar Operating voltage: 380 V Total power consumption: 3 kW Machine weight: approx. 250 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min Tjdpfx Aermkl Aja Ioc - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: good (used), saw blade diameter: 400 mm, – Double mitering – Mist lubrication system Tsdpfsim Ezgox Aa Ijc – Protective cap – 400V

Year of construction: 1984, condition: used, Corner connector, MachinePressta 7000, type PV 7. Tedpsi Dx A Esfx Aa Isc

Condition: used, Miter chop saw for aluminum (special machine construction with 4 servomotors) Circular saw, miter saw, crosscut saw Year of construction: 2002 Saw blade diameter: 500 mm Cutting range at 90°: Round Ø 180 Rectangle 350 x 140 mm (through crosscut) Cutting range at 45°: Round Ø 180 Rectangle 350 x 100 mm (through crosscut) Base carriage guide length: 1100 mm Travel on the base carriage (forward/backward): 650 mm Travel on the stand (up/down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Tedpfx Aedzp T Doa Ijc Power connection: 400 volts, 50 Hz - Controlled crosscut movement - Controlled saw blade height adjustment - Controlled miter cut through pivoting saw head - Controlled miter cut through tilting saw head - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gearbox (Motor MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Axis movement perpendicular via INDRAMAT servomotors and ball screw spindles (Motor MKDO41B-144-KP1-KN) - A total of 4 Indramat servomotors are installed - Very good German machine engineering Space requirement: L x W x H 1150 x 1100 x 1400 mm Weight: approx. 360 kg Good condition This unit comes from a special machine for specific products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm Tedpfxjx Eb Ane Aa Ioc - Maximum profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Radial feed movement from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable blade speed adjustment - Metered spray unit - 2 vertical and horizontal clamping devices, each with pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually operated safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with guard open: 2450 mm PD200-E-7 length measuring system - Usable as a stop as well as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target length, actual length, and quantity - Positioning accuracy 0.1 mm/m - Piece counter for number of completed pieces / cuts