Used K30 for sale (147)

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 0,185 t range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm total power requirement 0,75 kW Ppjdpfxjt U R H Us Ampjr Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically

Condition: used, Year of construction: 1991, measuring range X-axis 300 mm measuring range Y-axis 300 mm Table dimensions 800 x 800 mm taper ISO 30 voltage 220 V / 50 Hz total connected load 0,3 kW weight 0,5 t dimensions of the machine ca. 1,5 x 1 x 1,6 m • Tool presetter with taper SK 30, SK 40 is also optionally possible, Ppodpotv Icnjfx Ampsr • Display of measured value ZOLLER DA 6050 / 0266, serial no: H320/066

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Pressing force 2.6 tons at 5 bar Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Total stroke 56 mm Ram surface Ø 100 mm Pedpfx Asw A Srwempepr Tool holder Ø 12 mm Maximum installation height 180 mm Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Condition: excellent (used), functionality: fully functional, fuel type: gasoline, color: blue, operation weight: 3,500 kg, lifting power: 1,600 kg/m, lifting height: 30,000 mm, tire condition: 80 %, Year of construction: 2012, operating hours: 2,500 h, Crane on trailer AHK 30-1600 Registered in Poland, UDT valid until September 2026 • maximum mast extension 30m • outrigger spread in standard position 6.25 x 5.90 m • outrigger spread on one side 8.17 x 4.00 m • total trailer weight with crane approx. 3500 kg • drive controlled via radio remote system • radio control with work parameter display • line slack control mechanism and rope winding monitoring system • remote mast folding into transport position possible Mast construction • made of high-strength steel and aluminium alloys • integrated with chassis • equipped with modern telescopic extension system Additional equipment: • Rotating work basket for 2 people, 250kg capacity • Glass lifter Ppodpfxsyugt Ej Ampjr

Condition: new, empty load weight: 630 kg, maximum load weight: 1,970 kg, overall weight: 2,600 kg, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-DK3017-26-13-E 2600kg 306x175x85cm Mesh Extension Three-Way Tipper" Three-way tipper with corrugated mesh extension from trailer manufacturer Unsinn, model WEB-DK3017-26-13-E. Made in Germany! Ppedpfx Aog Un Dzjmpor The high-loader, three-way tipper, is equipped with electric hydraulics for tipping. The foldable and removable side walls make the car trailer easy to load from the side and rear with a forklift, wheel loader, or by hand. A welded and hot-dip galvanized steel frame makes the tipping trailer very stable. The tipper is equipped with a mesh extension, folding and removable side walls, a solid steel floor, electro-hydraulics, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, a rail shaft, and a very sturdy V-shaped drawbar. Tipper accessories such as a side wall extension, tarpaulin and frame, flat tarpaulin, net, box, loading rails, and supports are available for an additional charge. ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, input voltage: 400 V, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Podpfxoudwzco Ampepr Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Saw blade included.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). Pjdpfx Aev Nktbempopr The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design!

Condition: excellent (used), Year of construction: 2012, Werth Scope-Check 300x200x200 3D CNC coordinate measuring machine TECHNICAL DATA Measuring capacity (X x Y x Z): 300 x 200 x 200 mm Ppjdpjvffcpjfx Amper Work table, load capacity: 20 kg Magnification: X5 Resolution: 0.5 micron Weight: Approx. 300 kg No responsibility is taken for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, mileage: 81,436 km, power: 206 kW (280.08 HP), first registration: 06/1987, fuel type: diesel, overall weight: 22,000 kg, axle configuration: 3 axles, color: brown, gearing type: mechanical, total width: 2,500 mm, total height: 3,690 mm, Equipment: crane, Subject to errors and prior sale! Internal number: 1380. F003582 ---- EQUIPMENT * ex-Austrian Army * 6 seats (two individual seats in the front, 4 seats on the bench in the back) * 6 cylinder diesel engine * Dead weight 20.55 tonnes * GVW 22 tonnes * 2x4-speed gearbox with converter - drive on all wheels * Ringfeder trailer hitch - max. trailer load 16 tonnes * For further equipment and condition, see pictures... and much more ---- The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Psdpfx Amorbwmbjpopr Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a deposit! Do you have any questions? We are happy to advise you!

Year of construction: 1988, condition: new, Maker: SKF Model : 24160C CK 30/W33 Pedpfsdqrbhjx Ampepr 6 pcs in stock 156 kg/ pcs

Condition: excellent (used), functionality: fully functional, color: orange, overall weight: 3,500 kg, lifting height: 30,000 mm, mast type: telescopic, Year of construction: 2022, operating hours: 515 h, We hereby offer the following: Böcker AHK 30 KS Trailer Crane, Year 2022 Technically fully functional. Visually in excellent condition! Extension length: 30.00 m Reach: 21.10 m (250 kg); 3.60 m (1.5 t) Max payload: 1,500 kg Operating weight: 3,500 kg Transport dimensions (L/W/H): 9.36 m / 2.38 m / 2.53 m Drive: Kubota engine, 14.9 kW Special features: Manoeuvring drive and automatic set-up via remote control Accessories such as container, pallet fork, and tile lifter are available separately! Available from stock in Langenhagen All information regarding the offered machine is non-binding. Subject to errors, misprints, and prior sale. Ppsdpfx Amsxf E A Eepor

Year of construction: 1996, condition: good (used), machine/vehicle number: 598, Offer 22391 Technical data: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - stainless steel with 600 N/mm² strength 4 mm - stepless cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - locking stops left + right 300 mm each - table support surface 1000 x 800 mm Pedpoiqgd Eofx Ampspr - with T-slots and depth stops - table height approx. 900 mm - depth stops - drive 400 V / 4 kW - E - foot switch - space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg

Condition: new, gearing type: other, fuel type: diesel, driver cabin: other, Vehicle location: Bovenden, Ppjdpoi Rm Szofx Ampsr Body: 9.0 t trailer axle with drum brakes, 25 units available! 19x track width 1950mm and 6x track width 1830mm! Upon request also available with air suspension, axle suspension and brake cylinder at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, interim sale, and errors!

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Drum-braked 9.0 tn trailer axle 2x available! Axle including air bellows! Price per axle! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Podpfx Asi Rm Tmempjpr - .

Condition: used, mileage: 1,001 km, first registration: 01/1995, color: red, driver cabin: other, gearing type: other, emission class: none, Year of construction: 1995, Equipment: ABS, additional headlights, differential lock, trailer coupling, Vehicle location: Bovenden, 2-shell grab, 600 mm wide ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Pjdpfx Asi Rpi Eempepr

Condition: used, Year of construction: 2013, functionality: unexamined, overall weight: 290 kg, Sartorius EWK 3010 WS 60kg BL Belt L/W/H 130/70/60 cm Control unit L/W/H 35/50/160 cm Pedjw Et E Dopfx Ampspr

Condition: as good as new (ex-display), Technical specifications: Working surface 2800 x 1300 mm Maximum mould height 600 mm Vacuum pump 40 m³/h Vacuum vessel 2 x 200 l Membrane Rubber Configuration: - Oil free rotary valve vacuum pump (sub frame) - Vacuum vessel for fast vacuum ejection (sub frame) - Clamped membrane - Double frame for membrane clamping Podpfx Aob Awz Hempepr - Separate rubber sealing strip - Water proof robust working plate with cross milling - Vacuum height adjustable by means of electronic switch Control: The operating elements are integrated into the switch cabinet. The switch cabinet is installed into the base frame, including cable and 16 Amp. Cekon plug.

Condition: used, SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - Control panel - Automatic loader - Maximum working length 300 mm Ppodpfx Asrnq Riompjr - Min / max working diameter 8/80 mm - Working stations: * automatic loader * turning with n. 2 gouges (roughing + finishing) * 1° shaped knife * 2° shaped knife * unloading

Condition: new, Year of construction: 2026, functionality: fully functional, Type RLK: Roller conveyor length stop with retractable stop carriage to the rear. Podpfx Ajypwkwompepr Length – 3 m

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli OMK300 + UF 150/220 Ppsdpfx Ameycv Emjper Turning length: 300 mm Maximum square bar: 100x100 mm Minimum square bar: 20x20 mm Copy turning operation Drilling transfer UF 150/220

Year of construction: 2025, condition: new, functionality: fully functional, 30 pair sets of NSK bearings made in Japan, model 30TAC62B. Brand new. Ppjdpfxjvmrf Hj Ampor

Condition: new, Type CK-3000B Height of working table 800mm Working depth 65mm Working length 3100mm Motion controller Loran Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Psdpsqxtf Defx Ampepr Price 6499 Eur (EXW Jonava, Lithuania)

Condition: used, machine/vehicle number: 432, empty load weight: 9,200 kg, maximum load weight: 20,800 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 07/2001, next inspection (TÜV): 11/2023, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, loading space volume: 82 m³, suspension: air, tire size: 385/65 r 22,5, color: white, Equipment: ABS, tail-lift, * Drum brake * Wheelbase 1,810 mm Podsluby Repfx Ampjpr * Dhollandia type DHLSU 3,000 kg * BPW axles * Last axle with forced steering * Aluminum rims * Lifting and lowering device Errors excepted

Condition: new, PRICE: 13000 EUR Cutter Manufacturer: Talsa Model: K30ns Strong, all stainless steel construction, solid bowl and lid Very high cutting speed, fully variable from 500 up to 3500 rpm Smooth start of knives due to electronic drives, overload protection Electric device to prevent condensations inside the machine frame Transparent noise protection cover Pjdpfx Ameuphguspspr Volume: 30 liters Bowl Capacity: ± 5-22 kg Electric power: 5.6kW Voltage: 380V 50Hz Weight: ± 330 kg

Condition: used, Year of construction: 2013, Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour The Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour is a machine designed for shrink film packaging, ensuring high performance and reliability. Consequently, this model, manufactured in 2013, operates at a speed of 1650 bundles per hour, making it suitable for high-efficiency production environments. Technical Features of the Used Shrink Wrapper ITAL PAL FNC70+ PC300T1 1650 Bundles/Hour First of all, the machine features a straight entry configuration, allowing a linear handling of containers before film wrapping. Additionally, it works with neutral film, but it also supports printed films, enabling packaging customization according to production requirements. Moreover, the system includes a tray, which is essential for product stability during the packaging process. It processes formats ranging from 3 to 24 pieces per carton, with an adjustable configuration based on container volume. Similarly, the machine operates with American boxes, a widely used packaging type in the industry to ensure product protection and durability. Electrical Specifications and Energy Consumption Podpfxsv Ew Rlj Ampepr Furthermore, the system operates with a voltage of 380V, a power consumption of 10 kW, and a frequency of 50 Hz, meeting industrial standards for this type of machinery. Given these specifications, the shrink wrapper dimensions are 3400 mm in length and 2400 mm in depth, making it compatible with many existing production lines. Container Compatibility In particular, the Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  processes various types of containers, primarily focusing on glass bottles and cans, offering operational flexibility for different industrial sectors, including the beverage and food industries. As a result, manufacturers benefit from a machine that efficiently handles diverse packaging needs. Operational Status and Maintenance Notably, the machine is currently in production, ensuring full operational functionality and proper performance of all its components. Additionally, both technical manuals and safety protections are available, complying with industrial safety regulations. In addition to these features, the shrink wrapper has undergone periodic revisions, maintaining consistent performance and minimizing the risk of machine downtime. Furthermore, spare parts are available, facilitating routine and extraordinary maintenance without affecting productivity. Conclusion of this Used Shrink Wrapper ITAL PAL To sum up, the used ITAL PAL FCN70 + PK300T1 shrink wrapper is an optimal solution for those seeking a reliable machine with high production capacity. Consequently, its versatile configuration, compatibility with different packaging formats, and guaranteed maintenance make it ideal for automated packaging lines. Given its efficiency, the 1650 bundles per hour speed, combined with compatibility with neutral and printed films, makes it a strategic choice for optimizing industrial packaging processes. Therefore, this machine is an excellent investment for businesses aiming to enhance their packaging efficiency.