Used Jones Shipman 1400 for sale (2,161)

Condition: used, functionality: unexamined, mileage: 5,100 km, operation weight: 32,000 kg, Year of construction: 2007, operating hours: 8,000 h, Powerscreen Chieftain 1800 Double-Deck Screen 2007 Double-deck - 3 fractions, the screen for sale will have an additional fourth conveyor Two independent sieves for improved screening of fine fractions Upper deck area 4800x1350 mm Lower deck area 4200x1350 mm Nwedpfjzii Tiox Akien Capacity up to 200 tons per hour with a fraction of 0-31-63 mm Maximum material inlet 100 mm Hydraulically opening grate on the hopper CAT 100 HP engine Weight 34 tons

Condition: used, Year of construction: 2004, machine/vehicle number: PMPM000167, for Sparkling wine, wine and other beverages with CO2 Sekt, Wein und andere Getränke mit CO2. Rinsing Machine NOVA 20/1050 Counterpressure filler ELETTRA 1400/23 with 28 filling valves Capper-cork Machine DELTA 804 Eletrical Panel Pre-evacuation Pump Bottle format parts 375ml to 1500ml Nedpfez Ri T Rsx Akiswn

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 950 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, total height: 2,120 mm, total width: 1,770 mm, overall weight: 3,660 kg, spindle speed (max.): 1,800 rpm, product length (max.): 2,290 mm, number of axes: 3, This 3-axis KNUTH KB 1400 was manufactured in 2018. It features a travel of 950 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed range of 30 to 1800 rpm and a table setup area of 1400 mm x 400 mm. If you are looking to get high-quality milling capabilities, consider the KNUTH KB 1400 vertical machining centre we have for sale. Contact us for further details. • Feed • Feed speed X-axis: 18–627 mm/min • Feed speed Y-axis: 18–627 mm/min • Feed speed Z-axis: 18–627 mm/min • Rapid feed • Rapid feed X-axis: 1670 mm/min • Rapid feed Y-axis: 1670 mm/min • Rapid feed Z-axis: 1670 mm/min • Vertical milling head • Throat: 510 mm • Spindle speed (vertical): 30–1800 1/min (rpm) • Quill stroke: 105 mm • Head swivel range: ±30° Nwodpfozgfiuex Akien • Working area • Spindle axis-to-table surface distance: 150–650 mm • Table set-up area: 1400 × 400 mm • Number of T-slots: 3 • T-slot width: 18 mm • T-slot spacing: 100 mm • Speed height-adjustment (max.): 1670 mm/min • Coolant pump flow rate: 12 l/min Technical Specification Taper Size SK 50

Year of construction: 2020, condition: ready for operation (used), An autoclave Stock DFT including a Jumag steam system for the food industry is available. Batch trolley capacity: 2, process method: steam-water spraying, application: sterilization/pasteurization, gross volume: approx. 1550l, steam system: Jumag DG560, steam output: approx. 560kg/h. Including 6 batch trolleys. Documentation available. An on-site inspection is possible. Nsdsyh Nvgopfx Akijwn

Year of construction: 2023, condition: used, Manufacturer : Sesotec Model : Raycon D+ HX 1400 / 660 / 450 / 250 Year : 2023 Type: X-ray detector – X-ray inspection systems for food Product width: max: 450 mm Maximum product height: 250 mm Belt width: 660 mm Detection : 0.4 mm Nwsdpfx Aksy Abcreisn Capacity : 900 pcs/min Speed v = 0,32 -1,04 m/s X-ray Source : 40–100 kV / 2.0–5.0 mA (200 W) Weight : 585 kg Weight / conveyor : 111 kg

Condition: used, total height: 3,200 mm, total width: 3,250 mm, total length: 4,500 mm, Colour: Green Empty weight: 6.000 kg Price: On request - Drive system: Conventional - Model portal milling machine: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 - Z-axis travel [mm]: 1000 - Table length [mm]: 2200 - Table width [mm]: 1500 - Tool holder: SK40 - Options: Digital readout - Transport dimensions: 4500mm x 3250mm x 3200mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nsdpfxs Afww Ss Akiewn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Nodpszw Atlsfx Akiewn Additional equipment • Hydraulic ejector • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Nwjdpfexzuiysx Akien

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter Njdpsyxy D Tjfx Akiswn - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: good (used), Manufacturer: Knoll Year of construction: 2008 Type: HL 250/1400 Equipment number: 368355 High-pressure pumps: 2 x………….. bar Nsdpszqy Hvsfx Akijwn Tank capacity: 1,000 l Equipment: Knoll belt filter Note: The system was used on an index rotary machine. In this process, the coolant was pumped from the machine into the tank using a lift pump and then cleaned and pumped back to the machine using high-pressure pumps. The system has its own Siemens PLC with operator panel. Connection: 13.47 kW Weight: Dimensions: 1,500 x 1,800 x 2,400 mm

Condition: ready for operation (used), Year of construction: 2008, pressure 56.0 t chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg very good / well-maintained condition (!!) with lots of bending tools - in checked conditions - machine video - ?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) Nedpfx Aezy Sdxekiewn - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: excellent (used), Year of construction: 2025, ♻ Universal use (various wood, pallets with nails, chipboard boards, waste and scrap, veneer, MDF boards, cardboard boxes, plastics, textiles, tires, etc.). Njdjn Nwxfjpfx Akiown ✔ Power: 55 kW ✔ Shaft length: 1400 mm ✔ Shaft diameter: 315 mm ✔ Shaft RPM: adjustable ✔ Number of cutting knives: 60 ✔ Granulation: 15-90 mm ✔ Capacity: up to 17 m3/h* ✔ Filling opening: 1400 x 1800 mm ✔ Dimensions L/W/H: 2,20/3,10/2,80 m ✔ Weight: 7000 kg 2 years warranty or 2000 working hours

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, Panel Laminating Line for AKRYL, PET, PVC, HPL, CPL MASTER PUR-1400 Professional line for single-sided laminating of panels using PUR hot melt adhesive. Nwjdpozkmqbefx Akion Application: The machine is designed for laminating: MDF particleboard plywood PVC boards gypsum boards other wood-based materials Supported finishing materials: AKRYL PVC HPL PET CPL decorative paper Technical specifications: Working width: 1400 mm Maximum panel size: 2800 × 1300 mm Panel thickness: 2–40 mm Operating speed: 5–17 m/min Output: 3–5 pieces/min Maximum output: approx. 1200 pieces/8 h Drive power: 21.49 Kw Heating power: 51.7 Kw Line dimensions: approx. 16 × 2.5 × 2 m Required floor space: min. 6 × 22 m Line equipment: feeder with roller conveyor brushing machine for cleaning panels IR oven for preheating the material 3-roller PUR adhesive applicator foil feeding station roller nip press receiving conveyor 208-liter PUR adhesive melting tank Advantages: high surface quality even adhesive application possibility of laminating high-gloss films low adhesive consumption stable operation in serial production

Year of construction: 2005, condition: used, Max. locking force: 3500kN, clear tie-bar spacing: 710x710mm, min. mold height: 380mm, max. opening stroke: 1300mm minus mold height, max. ejector stroke: 250mm, max. ejector force: 95kN, ejector retraction force: 48kN, rotary table diameter: 890mm, screw diameter K1: 60mm, K2: 35mm, nozzle radius: 15mm, max. injection pressure K1: 2000bar, K2: 2429bar, max. shot weight (PS) K1: 618g, K2: 142g, hot runner: external, core pull connection: DNP Flatface BG3 (large flat-face sealing), centering mandrel: AS + DS, weight: 16.37t, total operating hours: 74,276h, production hours: 66,341h, the second injection unit and the rotary table have not been used for five years, with documentation and linear handling system, regularly maintained in-house. An on-site inspection is possible, the machine is not connected to power. Nwodpozzqmnsfx Akisn

Condition: used, This listing is for an OHaus Harvard Trip 1400/1500 Scales 2-5ib Capacity Mechanical Balance The unit is in full working condition and is ready for immediate release The Harvard Trip series is a precision, mechanical two‑pan (comparative) balance. Its principal use is for comparative weighing (i.e. comparing masses, not simply reading off an absolute weight) — you place an unknown object on one pan and “poise” weights / sliding masses on the other pan until balance is achieved. Njdpfx Akoxv Afleijwn Because it is mechanical, it requires no external power supply (no battery or electronics). The Harvard Trip balances are known for durability, low maintenance, and long service life.

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Nsdpfoxbgrgex Akiown Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: excellent (used), Year of construction: 2018, LARA CDCH-1400 SHEAR (year 2018) With discharge table. Hydraulic shear designed for cross-cutting strip material and managing scrap in coil feed lines. Supplied together with a discharge table, allowing for convenient and safe evacuation of cut material while maintaining a clean and continuous production process. Robust equipment with heavy-duty industrial construction, especially suited as an auxiliary component for cutting, stamping, or coil-feeding lines. Main Features • Hydraulic cross-cut shear • Hydraulic drive Nsdpfsy Edlhex Akijwn • Robust design for continuous operation • Clean and precise cutting of metal strip • Integrated discharge table • Facilitates evacuation of scrap and off-cuts • Improves ergonomics and orderliness on the line • Keeps the work area clear • Heavy-duty industrial construction • Rigid and stable frame • Designed to be integrated at the same height as the LARA feeder/straightener • Easy integration into existing lines • Safety system • Integrated into the line control system • Designed in compliance with CE standards Work Materials • Carbon steel • Stainless steel • Aluminum and light alloys Main Technical Data • Maximum working width: up to 1,400 mm • Type of drive: hydraulic • Working pressure: 4–6 bar (pneumatic control system) • Power supply: 400 V / 50 Hz

Condition: good (used), Year of construction: 2004, clamping force: 300 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, injection pressure: 2,000 bar, injection weight: 618 g, mold height (min.): 330 mm, plate width: 1,050 mm, plate height: 1,035 mm, overall weight: 12,000 kg, Robot W 621-ß077 x/y/z: 550/1200/2530 mm Nwedpjzyfw Eofx Akion C-axis: max. rotation 90° Core pulls: yes Hot runner controller IMM 8 Control system: MC 4

Condition: used, Year of construction: 1999, Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 RA2392 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Nwsdpfxsz Ecyre Akion Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sound pressure level is below 70 db(A) Conveyor belt 1390-700-590 and SEW gear motor with brake Conveying length (FL): 1400 mm effective width (NUB): 700 mm belt width (GB): 585 mm hight (BH): 740-840 mm Motor Type: SEW Gearmotor Motor Power: kW 0.55/0.55 S1 Hz 50 A 2.80/1.61 Speed: 10-36 m/min total weight: 190 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2001, condition: good (used), functionality: fully functional, * Mecanelec boxmaker with autofeeder * Max working width 1400mm * Creasing, cutting, slotting *die cutting, punching * Automatic feeder * Additional AUX. tools for cutting and creasing section * Very good condition, fully refurbished Nwodpfxou Rnkdj Akisn

Condition: used, Year of construction: 2026, operating hours: 987 h, functionality: fully functional, machine/vehicle number: 31681614, overall weight: 415 kg, power: 8 kW (10.88 HP), volume flow: 1.14 m³/h, operating pressure: 10 bar, noise level: 81 dB, Equipment: refrigerant dryer, used prototype (immediately available): RENNER Riko 1400/500 M-KT Piston Compressor with 2 x 4.0 kW piston compressors with RENNERtronic Touch control (base load change control + runtime limitation) wall mounting box with galvanized 500-liter tank standing with refrigerant dryer (DTP +3°C) and timed condensate drain with automatic level-controlled tank drainage Year of manufacture: 2026 Operating hours per compressor: 987 h Technical data: Motor power: 2 x 4.0 kW Rated voltage: 400 V Maximum pressure: 10 bar Delivery volume at 7 bar: 1140 l/min Cylinders / stages: 2/2 Noise level: 81 dB(A) Compressed air tank volume: 500 liters Dimensions L x W x H: 1890 x 712 x 1446 mm Weight: 415 kg Nedozb Etdepfx Akiown Shipping possible at extra cost. Leasing offer from our house bank possible for businesses. Takeover at the end of the term by payment of a final installment possible. Creditworthiness required. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: used, faceplate diameter 1400 mm Thickness 200 mm 650 total power requirement . kW weight of the machine ca. 1000 kg dimensions of the machine ca. . m 340 rpm Bolt circle: 330 mm Fit: 285 mm Jaw width: 55 mm Thickness: 170 mm Opening: 145 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Nsdeyuqh Tepfx Akiown Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2008, Lifting capacity: 1400 kg. Dimensions of the goods: Width: 2400 mm. Height: 2120 mm. Nwsdexw H Igepfx Akijn Depth: 300 mm. Weight: 180 kg. Condition: good, second-hand.

Condition: used, Electric pedestrian stacker, pallet stacker JUNGHEINRICH type EJC Z14 250 ZT Serial no. 90358452 Year of manufacture: 2010 Rated load capacity: 1400 kg Load center: 600 mm Rated lift height: 2500 mm Fork length: 1150 mm Overall length: 2050 mm Overall width: 840 mm Overall height: 1700 mm Operating voltage: 24 Volt - Initial lift for negotiating floor thresholds - Duplex mast - 1676 operating hours (readout) - Battery from 2016, type 24V 3PZS 375 (24V/375 Ah) - Automatic charger Jungheinrich 24 volt, 50 ampere Nedpfjxvdv Eex Akiswn - Surcharge for new UVV inspection = 150,-- EUR net Weight: 1200 kg Good condition

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 Nsdjxwtu Tepfx Akiswn 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon