Used Jet Jssg 10 for sale (60)

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD50 series of our high pressure machines covers a pressure from 230 to 2000 bar and a volume flow from 7 to 74 l/min. The pump is driven by a 4-cylinder water-cooled Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure long life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. There are 4 rubber feet mounted under the frame. The machine is also equipped with forklift pockets and lifting eyes at all four corners. For protection and storage of, for example, high-pressure hoses, a galvanized roof plate is provided. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 1000 bar 20 Lpm CD50-1250 1250 bar 15 Lpm CD50-1380 1380 bar 13 Lpm CD50-2000 2000 bar 10 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 cyl. Water cooled Power of drive motor: 37.3 kW Hjdpfx Adshgbf Ee Eew Drive engine speed: 1800 rpm Tank capacity: 90 L Max. Fuel consumption: 10.0 L/h Loudness (7m): 80 dBa Dimensions and weight: 1550mm x 920mm x 1250 mm (725 kg). Standard accessories included.

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD100 series of water and water jet machines range from 250 to 2050 bar with pump flows from 21 to 167 l / min. The pump is driven by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel for long life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are fitted with rubber feet under all four corners and the machine has forklift pockets and suspension eyes at all four corners. The machines have galvanized roof panels with side railings for protection and storage of, for example, high pressure hoses. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: Hjdehgbgqepfx Ad Ejw ----- Model Pressure Flow rate CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1000 bar 42 Lpm CD100-1400 1400 bar 30 Lpm CD100-2050 2050 bar 21 Lpm General specifications: ----- Max. Pump speed: 750 rpm Drive engine: 4 Cyl. Sisu Turbo Diesel water cooled Drive motor power: 74.6 kW Drive motor speed: 1800 rpm Tank capacity: 140 L Max. Fuel consumption: 16.0 L/h Loudness (1m): 84 dBa Dimensions and weight: 2250mm x 950mm x 1300 mm (2000 kg) Standard accessories included.

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Hsdpfx Adsnab Sis Eow We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) Hsdpfx Adjhmi Uco Ejw very low operation hours

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7,5 kW (50Hz) / 9 kW (60Hz) Hsdpfx Ajhf Na Ijd Eow Volt: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), The CE100 series is an electrically driven high pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 Hsdpfx Adjhga N Tj Eow CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high flow and pressure requirements. The pump is powered by a 6-cylinder Volvo diesel engine. There are two variants of the engine with an exhaust system according to EU Stage V / US EPA Tier 4 final or with an exhaust system according to EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is manufactured to be corrosion-resistant and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully built-in solution in a trailer or container. The CD700 can be equipped with a manual gearbox, which allows the pump to be operated in several flow ranges and even manual operation in the lowest gear is possible. Similar but no Falch, Hammelmann, Kamat, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD700-1000 1000 bar 261 Lpm General specifications: ----- Max. Pump speed: 522 rpm Drive engine: 6 cyl. Volvo Diesel EU Stage V or EU Stage II Power of the drive motor: 522 kW Drive engine speed: 1800 rpm Diesel tank: 800 L Hsdpfx Ajhgblkjd Esw Max. Fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers pressures from 200 to 2,800 bar and flow rates from 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is constructed from hot-dip galvanized steel, ensuring long durability and corrosion resistance. For an attractive appearance, the frame is primed and then painted. The machine’s dimensions are 2,250 x 950 mm. The frame is equipped at all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side bracket for protection and storage, for example for high-pressure hoses. Comparable but not the same as Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 Lpm CD200-250 250 bar 250 Lpm CD200-1000 1000 bar 63 Lpm CD200-1380 1380 bar 42 Lpm CD200-2500 2500 bar 25 Lpm CD200-2800 2800 bar 23 Lpm Hjdpshgbhnjfx Ad Ejw OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optionally without AdBlue) Drive engine power: 149.1 kW Drive engine speed: 1,950 rpm Tank: 135 L for skid version, 200 L for trailer version Max. fuel consumption: 18-20 L/h Dimensions and unladen weight SKID: 2,170 mm x 1,350 mm x 1,810 mm (1,785 kg) Dimensions and unladen weight TRAILER: 3,800 mm x 1,900 mm x 2,000 mm (2,500 kg) Includes standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE40 belongs to the series of our high pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and surrounding side frames made of stainless steel. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eye facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General specifications: ----- Drive motor power: 30 kW (50Hz) / 33 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A (60Hz) Hjdpfohga Irex Ad Eew Dimensions: 1600 mm x 1050 mm x 1150 mm Weight: 650 kg Standard accessories included.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC universal milling machine comes from a swiss company. Year of production: 2010 First machine installation: 2012 Technical details x-travel 750 mm y-travel 400 mm z-travel 500 mm Control Heidenhain TNC 320 Hsdpsxftbvofx Ad Esw spindle turning speed range 3800 rpm transmission ratio 2 tool taper 40 SK table-size 1500 x 670 mm table surface area 1270 x 320 mm table load 600 kg spindle drive 5,5 kW distance spindle /table 100-600 (min.-max.) mm distance spindle center to column 526 mm quill travel 120 mm weight of the machine ca. 2,2 t dimensions of the machine ca. 3,10 x 2,45 x 2,50 m Equipment: * 3-axes CNC-control Heidenhain TNC 320 * Additional handwheels for manual operation * Manually swiveling milling head (45 /90 deg.) with drilling quill * Central lubrication * Coolant equipment * Documentation/manual Maximum machining capacities: Drilling mild steel 40 mm diameter Tapping M 36 Boring 120 mm

Condition: like new (used), operating hours: 12 h, i3 Microclean UPGRADE DX PALLET SHAVING (€2,000) Like New – 1-Year Warranty Includes hoses and multiple nozzles. This machine is designed for industrial cleaning, scaling, and large-scale projects. A key advantage of this unit is its minimal use of new-generation electronics, resulting in enhanced reliability. The i3 Microclean is among the most powerful and aggressive machines currently available on the market and is in excellent condition. COLD JET machines are suitable for industrial cleaning, heavy-duty decontamination, and large projects. The absence of complex, modern electronics ensures maximum operational reliability and simplified maintenance. This machine remains in outstanding condition. Cold Jet i3 Microclean & Dry Ice Press – Complete Blasting Solution, Including the Following Equipment: • COLD JET i3 Microclean (12 operating hours) • 1 x 20’ blasting hose • 1 x Cold Jet applicator • 1 x nozzle Price: €24,500 This is one of the most highly regarded dry ice cleaning systems globally. With no sensitive electronics, it offers exceptional reliability and cost-effective maintenance. For inquiries or to schedule a viewing, please contact DrDryice. All machines come with a 1-year warranty. Cold Jet machine repair and maintenance services available. We also supply new Cold Jet machines – contact us for details. Worldwide shipping available. Cold Jet dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting equipment Dry ice blasting machine for sale Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Hjdexga Tzspfx Ad Ejw Cold Jet Aero 75 DX for sale Used Cold Jet machines for sale dry ice blasting systems – various Cold Jet models available Cold Jet dry ice machine repair and maintenance i3 Microclean Dry ice press

Year of construction: 2017, condition: ready for operation (used), Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible. Hodoxp Rcfepfx Ad Ejw

Condition: like new (used), Year of construction: 2012, Parallel Lathe JET PROMAC 941 V Between points: 500 mm Maxi Ø on bench: Ø 240 mm Maxi Ø over saddle: Ø 140 mm Spindle diameter: Ø 21 mm Spindle speed: from 100 to 1700 RPM Square turret Chuck: 3-jaws Ø 125 mm Year of construction: 2012 - Almost new Spindle motor: 1,3 kW Threadings: Metric + Whitworth Tailstock: CM2 Variable speed drive for the spindle Supplied with one 4-jaws chuck Ø 125 mm Hodswx Rm Eepfx Ad Esw Supplied with the gears for threading Electronic tachometer Voltage: 220 V mono Dimensions (L x W x H): 1200 x 600 x 1400 mm Weight: approx 200 kg

Condition: good (used), BACCI DOUBLE JET The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required. Hodpfx Adsxr Dduj Esw

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: Hodpjxgumcjfx Ad Eew - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE150 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 110 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Hedshga Scjpfx Ad Ejw Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 9 h, i3 Microclean & Dry Ice Press (can possibly be purchased separately) !!!! Condition: Like New | 1-Year Warranty Includes hoses and multiple nozzles. This machine is suitable for industrial cleaning, from detail work to very large-scale projects. A key advantage of this unit is its lack of new-generation electronic components, ensuring durability and ease of maintenance. It is one of the most aggressive and effective dry ice blasting machines on the market. The machine is in excellent condition. The COLD JET machine is ideal for industrial cleaning, tackling both small and large jobs. Its straightforward, electronics-free design makes it exceptionally reliable and cost-effective to maintain. For sale: Complete Cold Jet i3 Microclean & Dry Ice Press Blasting Package, comprising: COLD JET i3 Microclean (Only 9 operating hours) - 1 x 20’ (6 m) Blasting Hose - 1 x Cold Jet Applicator - 1 x Nozzle Price: €27,500 Recognized as one of the best machines in its class worldwide, the absence of electronic systems enhances its reliability and reduces maintenance costs. For inquiries or to schedule a viewing, please contact us at DrDryice. Hsdow In Iwopfx Ad Eew All machines sold are covered by a 1-year warranty. We offer repairs and maintenance services for all Cold Jet machines. New Cold Jet machines are also available—please contact us for more information. Worldwide shipping available. Key search terms: - Cold Jet dry ice machine for sale - Dry ice machine for sale - Dry ice blasting machine for sale - Dry ice blaster for sale - Buy dry ice blasting machine - Dry ice blasting equipment – dry ice blasting | dry ice machine | dry ice blaster - Cold Jet Aero 30 for sale - Cold Jet Aero 40FP for sale - Cold Jet Aero 40HP for sale - Cold Jet Aero 75 for sale - Cold Jet Aero 75 DX for sale - Used Cold Jet machine for sale - Dry ice blasting machines – various Cold Jet models - Service and repair of Cold Jet dry ice machines - i3 Microclean - Dry Ice Press

Condition: good (used), BACCI DOUBLE JET The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. Hodpfxjxr Dcwo Ad Esw This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min Hedpfx Adsxgua Ao Esw - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine is as new Hedjwg R Rmopfx Ad Eew This machine is suitable for industrial cleaning, both for everyday tasks and for very large projects. A key advantage of this machine is the lack of complex new-generation electronics, making it one of the most robust and aggressive machines on the market. The machine is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine – Complete with the Following Equipment: COLDJET AERO 30 DRY ICE (151 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles NEW Price: €14,900 NO VAT NO TAX This is one of the best machines in the world. It is entirely free from unnecessary electronics, ensuring reliability and keeping maintenance costs low. For inquiries or to arrange a viewing, please contact us – Dr.Dryice. All machines sold come with a 1-year warranty. We provide repairs and maintenance for Cold Jet machines. New Cold Jet machines available on request – please contact us. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine dry ice blasting unit – dry ice blasting | dry ice machine | dry ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale dry ice blasting machine for sale Dry ice blasting machines, various Cold Jet models Cold Jet dry ice machine maintenance and repair

Condition: like new (used), functionality: fully functional, operating hours: 112 h, LIMITED EDITION No. 60 Cold Jet Limited Edition 20th Anniversary. COLD JET AERO 75 DX 20BAR 300PSI This machine is suitable for industrial cleaning, remediation, and large-scale projects. The key advantage of this unit is its minimal use of advanced electronics, making it one of the most robust and aggressive dry ice blasting machines available on the market. The machine is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine Complete with the Following Equipment: COLD JET AERO 75 DX DRY ICE Blaster (112 operating hours) Includes: - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles NEW Price: €21,800 This is one of the top-performing dry ice cleaning machines in the world. It contains no sensitive electronics, which makes it highly reliable and cost-effective to maintain. For inquiries or to schedule a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We provide repair and maintenance services for Cold Jet equipment and also supply new Cold Jet machines. Contact us for further information. Hedpfx Adsw Ixcrs Eew Worldwide shipping available. Cold Jet dry ice machine for sale Dry ice machine for sale Dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Dry ice blasting – dry ice blasting equipment | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machines for sale Dry ice blasting machines for sale Dry ice blasting machines Cold Jet various models Maintenance and repair of Cold Jet dry ice machines

Condition: like new (used), Year of construction: 2012, operating hours: 191 h, functionality: fully functional, compressed air connection: 20 bar, pressure: 20 bar, Cold Jet Aero 40 HP This machine is suitable for industrial cleaning, from routine tasks to very large projects. The advantage of this unit is its lack of next-generation electronics, making it straightforward and robust. It is considered one of the most aggressive and effective machines on the market. The machine is in excellent condition. Cold Jet Aero 40 HP Dry Ice Blasting Machine – Complete with the Following Equipment: Hjdpfswyk Uxjx Ad Ejw - COLD JET AERO 40 HP DRY ICE BLASTER (191 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Price: €19,500 This is one of the best machines available worldwide. It contains no electronic control systems, which makes it extremely reliable and reduces maintenance costs. For inquiries or to arrange a viewing, please contact DrDryice. All machines are sold with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines and also supply new Cold Jet models. Contact us for more information. Worldwide shipping available. Relevant keywords: Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine | dry ice blaster | dry ice cleaning Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale dry ice blasting machine for sale Cold Jet dry ice blasting machines various models Maintenance and repair of Cold Jet dry ice machines

Condition: used, Year of construction: 2008, operating hours: 256 h, functionality: fully functional, compressed air connection: 9.6 bar, operating pressure: 10 bar, Cold Jet Aero 75 This machine is ideal for industrial cleaning, heavy-duty, and large-scale projects. Its key advantage is the absence of complex modern electronics, making it highly reliable and straightforward to maintain. Recognized as one of the most aggressive and efficient machines available on the market, this particular unit is in excellent condition. Cold Jet Aero 75 Dry Ice Blasting Machine Complete with the Following Equipment: - COLD JET AERO 75 DRY ICE (256 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Coldjet Applicator - 2 x Nozzles (NEW) Price: €16,500 Considered one of the best machines worldwide—no onboard electronics, ensuring reliability and low maintenance costs. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines are sold with a 1-year warranty. We also perform repairs and maintenance on Cold Jet machines, and supply new Cold Jet units. Get in touch for more information. Worldwide shipping available. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines – various Cold Jet models Service and repairs for Cold Jet dry ice machines Hjdpfowynncjx Ad Eow

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine – Like New Condition This machine is designed for industrial cleaning, including the toughest large-scale applications. A key advantage of this model is that it does not feature complex new-generation electronics, making it highly reliable and easier to service. It is regarded as one of the most powerful dry ice blasting units available on the market. The machine is exceptionally well-maintained and in pristine condition. Specification: COLD JET AERO 75 DX DRY ICE BLASTING MACHINE (ONLY 12 OPERATING HOURS) Package Includes: - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Price: €21,800 Hodpewg R Edjfx Ad Eew This is one of the top-performing dry ice blasting machines worldwide. With no complex electronics, it is dependable and cost-effective to maintain. Estimated New Price: €42,000 For inquiries or to arrange an inspection, please contact DrDryice. All machines are sold with a 1-year warranty. We provide repairs and maintenance for Cold Jet machines. We also offer new Cold Jet systems. Please contact us for further information. Worldwide Shipping Available. Keywords: Cold Jet dry ice machine for sale Dry ice machine for sale Dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale (various Cold Jet models) Maintenance and repair of Cold Jet dry ice machines

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently around € 250,000 Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Specifications: * Dosing capacity: up to 10 drops/min of 800 g (tolerance ±5%) * Packaging capacity: up to 25 bags/min (depending on bag size) * Maximum bag width: 230 mm, maximum film width: 600 mm * Works with 40-micron BOPP film (optional with perforation and print) * Includes: vibration dosing system, conveyors, bagging machine, accumulation table Advantages: Hodpfxew Ttxfe Ad Eew * Fully automated dosing, filling, and packaging * Stable and reliable operation, approved in validation tests * Eco-friendly and efficient solution for dry ice production * Usable for up to 1,600 operating hours per year