Used Jackle Power Plasma for sale (39,794)

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch). Dcodpstp Dhpofx Adhen  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) Dodpfx Adjvpalajhecn ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: used, functionality: fully functional, Year of construction: 2008, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Dsdpfxsy E N Hds Adhjcn Hypertherm Plasma. Kemper Extraction Unit

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications Dcodpjy E Nykofx Adhen PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: new, Year of construction: 2026, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. Dedpfxezzk Ekj Adhocn - Gantry height Z = 100 mm.

Condition: new, input voltage: 400 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, welding current (min.): 25 A, welding current (max.): 400 A, Lorch iQS series – Top-level welding for maximum productivity in industrial manufacturing Maximum performance and reproducible quality: The Lorch iQS series is a powerful, digitally networked MIG-MAG welding system for demanding industrial applications. The newly developed inverter generates an exceptionally stable and smooth arc. All parameters can be continuously adjusted to the optimal operating point – for high-quality, reproducible welds on steel, stainless steel, and aluminum. The iQS is suitable for both manual welding and robotic integration, providing a future-proof platform for modern manufacturing companies. Less spatter, less rework: The innovative Smart Process Control Engine enables continuous development of the available welding programs. New processes and functions can be transferred to the system, ensuring that users always work with the latest technology. The integrated RCS module improves short-circuiting in particular: the process runs more cleanly, the weld pool is easier to control, and spatter formation is reduced. This increases weld quality and reduces time-consuming and costly rework – especially on thin sheets under 3 mm. Lorch Speed processes for higher productivity: Depending on the configuration, proven Lorch processes such as SpeedPulse XT, SpeedArc, SpeedTwin, SpeedRoot, SpeedUp, and SpeedCold are available. They enable higher welding speeds, better penetration, attractive weld bead surfaces, and precise process control. Users receive a flexibly configurable solution for a wide range of materials, weld geometries, and welding positions. Intuitive operation with Smart Cockpit: The robust 7-inch Smart Cockpit can be operated via touchscreen or rotary control – even with welding gloves. A clear menu guides users, displaying only suitable material, wire, and gas combinations, thereby reducing incorrect settings. Important parameters can be accessed immediately via the configurable QuickAccess menu. Current values are visualized during welding; subsequently, the Hold function indicates whether the specified parameters have been met. Dodpfx Aezwfgbjdhjcn Networked, robust, and easy to service: WLAN and Lorch Connect enable the recording, documentation, and analysis of welding data, as well as updates and future function upgrades. The encapsulated air duct, the dust-protected electronics area, and the modular design simplify maintenance and ensure uncomplicated service. Optionally, the robust MF-09 wire feeder complements the system with 4x4 drive, a quick-change system, and various chassis and transport options. Technical performance variants: The iQS 3 offers a welding range of 25 to 320 A, and the iQS 5 offers a range of 25 to 400 A. Both models operate on 3-phase power supplies from 380 to 480 V, have an IP23S protection rating, and a robust 4x4 wire feed unit. The equipment and scope of delivery depend on the chosen configuration. Document 1: technical details IQS series (EN) Document 2: brochure IQS series (EN) Document 3: technical data IQS series (DE) Document 4: brochure IQS series (DE)

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine, only 4,300 cutting hours. Dodpfx Aeivg Hgsdhjcn This Prima Industrie Platino 1530 4.0kW CO2 laser cutting machine was manufactured in Italy in 2011 and installed at the end of 2011. Equipped with a PRIMACH 20 L control unit.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: Power Line 300 T2, For sale: a high-quality, continuous/throughput industrial washing system manufactured by the German company LPW Reinigungssysteme GmbH, model Power Line 300 T2. The machine was built in 2018 and is complemented by an original MAHLE Filtersysteme extension/expansion from 2019. Djdpfx Ajz Atinsdhocn

Condition: like new (used), Year of construction: 2014, functionality: fully functional, USED BUT ALMOST NEW POWER GENERATOR VISA GEN_SET V350GX 280KW 350kVA, VOLVO PENTA engine. ONLY 28 HOURS OF USE, LIKE NEW. Dsdjzhkr Dopfx Adhecn

Condition: used, Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 3232, working width: 1,500 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, For sale is a MicroStep CNC cutting system from the MG series, model MG 6001.15PrkGB+CH500P, manufactured in 2022, with approximately 2,000 operating hours. Equipment: - Plasma rotator for weld preparation with Kjellberg Q 3000 plasma power source - Fully automatic oxy-fuel support - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Pipe cutting device RSV 30-300 - Filter system TEKA ZPF 6H with 11 kW Technical data: Working area approx. 6,000 x 1,500 mm + 500 mm clearance Max. travel height approx. 150 mm Max. table load approx. 100 mm Guideways in the X-axis: Linear guideways with helical gear racks Dcsdpoz A Tk Nsfx Adhsn Drives: Digital, maintenance-free AC servo motors with IRC Positioning speed up to 40,000 mm/min. Positioning accuracy ≤ 0.06 mm/m Bidirectional repeatability 0.05 mm/m Inspection: An inspection is possible at the location in Wörth a. d. Isar. Interested? The machine is offered in an online auction. Further information and documents are available upon request. Simply contact us!

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Dcsdpszqgllofx Adhon Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Setting range: 8 power levels Djdpfx Adszugn Ishecn Mains connection: 400 volts, 50 Hz, 16 amp plug - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition

Condition: good (used), Year of construction: 2015, operating hours: 24,272 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, torque: 406 Nm, controller manufacturer: Heidenhain, overall weight: 11,800 kg, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, MAS KOVOSVIT MCV 1270 Power Year of manufacture: 2015 Heidenhain iTNC 530 control system X-axis: 1270 mm, Y-axis: 610 mm, Z-axis: 720 mm Tool changer: 24-position SK50 Dedpfxjzydaro Adhjcn Spindle speed: up to 8000 rpm Spindle torque: 406 Nm / 100% 623 Nm / 40% Chip conveyor Coolant pressure: 20 bar Weight: 11800 kg

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Djdpouv Eudefx Adhecn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, mileage: 184,500 km, power: 59 kW (80.22 HP), first registration: 11/2017, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space length: 1,400 mm, Year of construction: 2017, - Used light commercial vehicle: Fiat Fiorino Natural Power, powered by natural gas (methane). - Registration: November 2017, Engine: 1.4 Petrol / Methane, 80 hp, Euro 6, Mileage: 184,500 km. - 2-seater van, cargo area length: 1,400 mm, with a sliding door on the right side. - Equipped with: Air conditioning, Bluetooth radio with USB, Central locking, On-board computer, Two keys, Driver airbag. - Bodywork in good condition, interior in good condition, mechanical components in working order. - Timing belt kit and water pump replaced at 147,000 km. - Methane tank inspection valid until November 2027. - Single owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM, Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM. - Certified mileage. - Test drive possible by appointment. - Ownership transfer handled on-site. - Customized financing options available. Carlo Mauri Srl disclaims all responsibility for any unintentional inaccuracies in the advertisement, which does not constitute any contractual obligation. The prices listed are exclusive of VAT and ownership transfer fees. Dcjdszx N Hbjpfx Adhjn

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm Dcjdpfxjwiq Scs Adhjn seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: used, “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Quantity: 2 available Manufacturer: Dr. Escherich GmbH Dcjdezlt Hfspfx Adhjn Model: HVD-05 Power Unit 60 FC Type: Power supply unit for ionization systems Input voltage: 230 V AC Output voltage: 24 V DC Power: 60 W Function: Power supply and control power Application: Laboratory equipment, ESD systems, control technology

Condition: used, OKUMA POWER SUPPLY GLP 5000T E0451-521-037 . 2663 Dcodpfx Adsy S Dr Ujhsn

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: Dsdpfxszimb Dj Adhocn For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: good (used), Control amplifier, servo motor control, power controller, thyristor power controller, thyristor regulator, power regulator -Manufacturer: KBR, power controller, power regulator, reactive power controller -Type: BK 2006 Dcodjzkr Dmepfx Adhjn -Voltage: 230 V, 50 Hz -Dimensions: 150/145/H85 mm -Weight: 1.2 kg

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg Dedpfxjv Tvtno Adhjcn

Condition: good (used), power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply -Manufacturer: Feas, power supply DC Power Supply -Type: PS3U1K224 Djdpfjwcyz Hsx Adhjcn -Power: 1200 VA -Dimensions: 250/175/H215 mm -Weight: 19,2 kg

Condition: good (used), power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current supply Dsdswc Nmfjpfx Adhocn -Manufacturer: Siemens, power supply DC power supply SIMATIC S7-400, power supply PS407. 10A -Type: 6ES7 407-OKROO-OAAO -Power: 10 A -Dimensions: 215/50/H290 mm -Weight: 1.4 kg

Condition: used, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: Pilz, power supply power supply type P10 APS -Power supply: ELBA-electric type euro power ESPS835515/X -Card block: Phoenix Contact SKBI 64/H15- Dedpfspk Iq Nsx Adhecn -Dimension: 120/70/H190 mm -Weight: 0.5 kg/pc.

Condition: ready for operation (used), Fanuc A06B-6087-H130 Power Supply Module SN:EA7601604, used, normal signs of wear, 100% functional, scope of delivery as per photos. Djdpfx Adex Era Hehjcn