Used Itec for sale (211)

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, UNITECH designs and manufactures pneumohydraulic presses with nominal pressing forces from 10 to 600 kN, available in C-frame, two-column (two-post) and four-column (four-post) designs. The advertised price of EUR 4,000 net (excluding VAT) applies exclusively to the basic 10 kN model. All other press models and equipment configurations are quoted individually according to the required pressing force, frame design, stroke lengths, working area, control system and safety equipment. This listing covers the complete UNITECH range of new pneumohydraulic presses for industrial assembly and production applications. Each press can be configured to suit the workpiece, tooling and intended manufacturing process. TECHNICAL RANGE Nominal pressing forces: – 10, 30, 50, 100, 150, 200, 300, 400 and 600 kN Available frame designs: – C-frame – Two-column (two-post) – Four-column (four-post) Stroke ranges: – Power stroke: 5–20 mm – Total ram stroke: 50–250 mm The available combinations of pressing force, frame design and stroke lengths depend on the selected configuration and application. OPERATING PRINCIPLE Nedpfjv Snixox Abyjdc The pneumohydraulic drive combines a fast pneumatic approach stroke with a short, hydraulically intensified power stroke. The full pressing force is generated only during the working phase of the cycle, providing an efficient solution for industrial pressing and assembly operations. TYPICAL APPLICATIONS Subject to the selected configuration, tooling and process-specific risk assessment, the presses can be used for: – Press-fitting and component assembly – Inserting bearings and bushings – Riveting and crimping – Punching and marking – Bending and forming – Straightening and calibration CUSTOM CONFIGURATION The following parameters and equipment can be adapted to the intended application: – Nominal pressing force – Frame design – Working area and installation dimensions – Power stroke and total ram stroke – Tool and workpiece mounting – Control system and operating sequence – Application-specific guards and safety equipment – Integration with production lines and auxiliary equipment DOCUMENTATION, ACCEPTANCE AND DELIVERY Complete machines are supplied with CE marking, an EU Declaration of Conformity and operating instructions in the agreed language: Polish, English or German. A Factory Acceptance Test (FAT) is carried out prior to dispatch. The presses are covered by a 12-month warranty. Standard delivery terms are FCA UNITECH, Zawiercie, Poland (Incoterms 2020). REQUEST FOR QUOTATION To receive a technical proposal and quotation, please provide: – Required pressing force – Preferred frame design – Workpiece and tooling dimensions – Required working height and working area – Required power stroke and total ram stroke – Description of the manufacturing process – Required control and safety equipment – Expected cycle time or production rate The photographs show examples of UNITECH press configurations and may include optional equipment. The final technical specification, price and delivery time depend on the selected configuration.

Condition: excellent (used), X-ray sorting system. Manufacturer: TITECH TOMRA Model: X-TRACT 1200 Year: 2012 The machine is in very good condition. Complete machine overhaul carried out. Source renewed: €35,000 All sensors replaced: €29,000 Belt replaced. Areas of application: - Metal sorting - Sorting of wood, production of refuse-derived fuels (RDF) - Sorting of organic waste Ndjdpfx Asy Ra D Robyjc

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, grinding length: 1,600 mm, grinding width: 500 mm, workpiece weight (max.): 900 kg, grinding wheel diameter: 355 mm, rapid traverse X-axis: 1 m/min, travel speed (max.): 25 mm/min, TECHNICAL DETAILS Table size: 500 x 1,600 mm Max. grinding area: 500 x 1,600 mm Max. distance from spindle center to worktable: 600 mm Load capacity (with magnetic chuck): 900 kg Axis parameters Longitudinal feed speed: 5–25 m/min Cross rapid traverse (X-axis): 50–1,000 mm/min Cross feed, incremental: 1–20 mm/stroke Cross hand feed (MPG): 0.005 mm/click Vertical rapid traverse (Z-axis): 50–500 mm/min Vertical automatic feed: 0.005–0.04 mm/stroke Vertical hand feed (MPG): 0.005 mm/click Grinding wheel Dimensions (outside diameter x width x bore): 355 x 20~50 x 127 mm Spindle speed: 1,440 rpm Drive capacities Spindle motor: 7.5 kW Hydraulic pump motor: 3 kW Servo motor, cross feed: 0.5 kW Servo motor, vertical feed: 2 kW Coolant pump: 0.125 kW Lubrication pump: 0.06 kW Total connected load: 14 kVA MACHINE DETAILS Dimensions & weight Required installation space: 7,120 x 2,550 mm Height: 2,700 mm Machine weight: approx. 6,000 kg EQUIPMENT PLC + HMI automatic grinding control Integrated control for magnetic chuck Coolant tank Balancing arbor Grinding wheel flange and puller Wheel dresser stand MPG handwheels for Y/Z axis Operating manual Ndedpfeyymkcjx Abyjc Splash guard Standard grinding wheel Levelling wedges and bolts

Condition: used, Year of construction: 2006, operating hours: 667 h, 2006 | Iteco IG 10130 (9,85m) | Used Scissor Lift | 667 hours Nedpfx Aoyc Ig Nebyedc 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 33 inspection points 28 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38002 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, For sale: Nozzitec Applicator - COLD JET A-quality. Can also be used with all COLD JET blasting machines. Microclean i3 AERO 30 AERO 40 FP / HP AERO 75 DX AERO 80 FP We have all the parts in stock for these machines. Contact us. Ndsdpfxjzurwbj Abyoc We have various new parts in stock for Cold Jet machines. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero 75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: as good as new (ex-display), Year of construction: 2021, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Equipment: documentation/manual, lighting, AIM coordinate measuring centers are the technical successors to the Mahr multisensor coordinate measuring machines currently in use worldwide. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Maximum workpiece weight: approx. 40 kg on the glass plate Accuracy: U1 = 1.9 + L/200 U2 = 2.4 + L/150 U3 = 2.9 + L/100 (L = measuring length in mm) Increased accuracy available on request Nsdpfeg Ewk Rex Abyjdc Traverse speed: 200 mm/s Acceleration: 400 mm/s Scale resolution: 0.0001 mm Multisensor sensor unit (MSH) optical/tactile/laser - including high-precision USB camera with 2-stage zoom and telecentric beam path - including PTL01 TTL point laser, high-precision, telecentrically coupled - including Renishaw TP200 integrated tactile probe system, optionally expandable - including Quad-Light LED power ring light, programmable illumination - including LED power transmitted light - including Nikon precision objective 5x (optional 3x, 10x, 20x, 50x) C-mount Technology - including calibration standard with factory calibration certificate, consisting of a glass plate "circle", calibration sphere and gauge ring Transfer - state-of-the-art PT200 CNC controller system in a robust, industrial-grade control cabinet - PCI-BUS system for fast internal data transfer in real-time operation - pull-out controller rack 19" for optimal access in the event of service - modular controller concept open for later upgrades and retrofits - service-optimized controller design for quick access and service times - integrated 64-bit broadband bus technology with real-time data transfer - 4-channel online temperature compensation preparation "on board" - active safety technology for drives, light management and sensors - online remote connection for remote maintenance and online system check - LS circuit breakers for quick fault finding in the event of service - firmware adaptation for volumetric 3D full error compensation Including the powerful OptiCheck3D 5.0 software Commissioning, training and start-up support (programming) can be booked as a special package!

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, Original machine year: 1996. In 2011, fully overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical components extensively renewed. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 – 1,500 mm Tube outside diameter: 28 mm – 60 mm Material specifications Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Capacity (steel): Ø 60 x 3 mm Capacity (stainless steel): Ø 57 x 2 mm Axes/Movements Bending direction: left Bending speed (forward): max. 22.0 rpm (infinitely variable) Bending speed (return): constant 22.0 rpm Ndjdpfjx Srkljx Abyjc Rotational positioning: max. 360° Rotational speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic oil volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning device: NTB configuration Control unit: Schwarze-Robitec operation and control console FEATURES - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and retraction - Various bending tools for Ø 60 mm tubes - Various accessories - Control cabinet cooling unit - Dual foot switch - Schwarze-Robitec control console - Rittal control cabinet cooling unit, type SK 3361100 Note: Machine could only be tested in setup mode due to lack of operating know-how. No faults are known. The machine is currently disassembled.

Condition: excellent (used), Year of construction: 2021, operating hours: 1,400 h, Erbay MCC 700 – Technical Specifications General Information Brand: Erbay Model: MCC 700 Product Code: OZ-MCC700-2026 Type: Air-Cooled Chiller Condition: Remanufactured Application: Comfort & Process Cooling Performance Cooling Capacity: 700 kW Nsdpfoikz Hxox Abyjdc Cooling Capacity: 602,000 kcal/h Water Flow Rate: 120.40 m³/h Sound Power Level (Lw): 105 dB(A) Water Connection Size: 6" (Ø150 mm) Compressor / Refrigeration Circuit Compressor Brand: Bitzer Compressor Model: CSH7583-100 Number of Compressors: 2 Compressor Type: Screw Refrigerant: R407C Evaporator Type: Shell & Tube Condenser Type: Microchannel Electrical Specifications Power Supply: 400 V AC Phase: 3 Phase (3~) Frequency: 50 Hz Maximum Current: 330 A Control Panel: Eliwell Dimensions & Weight Length: 6,530 mm Width: 2,200 mm Height: 2,550 mm Weight: 4,211 kg Key Technical Features 700 kW cooling capacity 2 × Bitzer CSH7583-100 screw compressors R407C refrigerant Shell & Tube evaporator Microchannel condenser Design water flow rate: 120.40 m³/h 6" (DN150) water connections 400 V AC / 3 Phase / 50 Hz power supply 330 A maximum operating current Eliwell control panel Operating weight: 4,211 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,060 kg, total height: 1,800 mm, total width: 1,830 mm, total length: 2,000 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, spindle speed (max.): 3,200 rpm, workpiece weight (max.): 25 kg, power: 2.2 kW (2.99 HP), air demand: 750 m³/h, operating pressure: 6 bar, number of spindles: 12, empty load weight: 975 kg, warranty duration: 12 months, Easy programmamble through-feed boring machine with touch-easy-smart software, 3 controlled axis X,Y,Z, also performing grooving operations (optional) and working from above Vacuum panel feeding Machine manufactured according to EC standards STANDARD EQUIPMENT HEAD UNIT Independent spindles N.7 vertical N.1 double horizontal -spindle TH1 (X axis) for back/ forth drilling Manual SIDE-ALIGNER PANEL EDGE-READER for perfect panel joints Teleservice Software Dust-collection nozzle Wokring table with GENTLE BRUSHES to avoid storage of dust and shavings. Working process can be in a cycle or back to the operator Ndedpfx Asu U Hgisbysc HARDWARE & SOFTWARE 12" touch-screen - NO TEXT System, patented by Maggi USB and Ethernet ports for file uploading, on-line assistance and system upgrades System based on Linux Kernel Up to 1.000 working programs storable Package: on a wooden pallet (2200x2050x160 mm - Kg 123)

Year of construction: 2023, condition: new, The sieve machine is ideal in combination with a crusher and / or mill for the exact separation of bulk materials. Ndsdpeh R Twbefx Abysc

Condition: excellent (used), Thyristor regulator with field regulator (28211) Manufacturer: Unitek Type: 82 Classic Q. 3 400/450-60 Ndodpfx Ashhyy Robyec UE 400 UA 450 ld 60 A Ia 120 A Weight: 11 kg Width: 290 mm Depth: 230 mm Height: 225 mm

Condition: good (used), Relay, contactor, semiconductor contactor, contactor Nodjfmy Hvepfx Abysdc -Elero: Uni-Tec 868 wireless wall transmitter -Application: roller shutters, awnings blinds, special applications -Price: per piece -Number: 1 pieces -Dimensions: 81x81x22 mm (LxWxD) -Weight 0.1 kg/piece

Condition: good (used), Used stainless steel container Last application: Pharmaceutical Item number: 10717 Volume: 300 liters Type: Standing on 3 legs Height of legs: 780mm Material (media-contact): 1.4571 / AISI316 Design: Single-walled Operating pressure according to nameplate: ATM Max. operating temperature: 100°C Container dimensions: Outer diameter: 700mm Overall width: 810mm Overall length: 885mm Ndjdpfx Ajicnursbysc Overall height: 2100mm Cylindrical height: 800mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: yes Distance from outlet to bottom: 510mm Outlet diameter: 47mm Various nozzles

Year of construction: 2024, condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as catalysts, ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Njdpfx Aboku A H Uoyjdc

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2017, load capacity: 3,000 kg, Auction of a nearly new exhibition machine! TECHNICAL DETAILS Load capacity: 3.0 t Njdpeygxabefx Abyedc Number of suction pads: 8

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Ndjdepu R Nvjpfx Abyec Weight 390 kg Good condition

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm bending radius min. 10 mm bending radius max. 75 mm Ndodpfx Abowbi Hceysc bending speed 35 mm/min pull up length of tube 2000 mm total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm

Year of construction: 2024, condition: new, The CM 3 cutting mill is indispensable for commercial laboratories, industry and universities in which tough, fibrous and elastic material has to be pre-milled. Ndedpfxoiudqhe Abysc

Year of construction: 2024, condition: new, The LITech jaw crushers are ideal for pre-crushing extremely hard, medium-hard, hard-tough and brittle materials such as rubble, bentonite, soil, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous materials -Metal, Slag and many, many more!! Nodega Nfcspfx Abyedc

Year of construction: 2024, condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Ndsdpfjgchbmsx Abyjc

Year of construction: 2024, condition: new, The jaw crusher JC 300 is ideally suited for crushing of hard, brittle, hard tough samples like ceramics, clinker, coke, construction materials, ferro alloys, glass, minerals, ores, precious metals, rocks, silicon, slag and many more. Ndsdpfxof Uclfo Abyoc Max. feed size*

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Njdpfewb E Sbox Abysdc

Condition: new, Year of construction: 2026, The ball mill is ideal for mineral ores. Ndjdpspahwvjfx Abysc

Year of construction: 2024, condition: new, The JC 600 jaw crusher is ideal for crushing hard, brittle, hard-tough samples such as ceramics, clinker, coke, building materials, ferroalloys, glass, minerals, ores, precious metals, rocks, silicon, slag and much more. Njdpfsiamqbsx Abyodc

Year of construction: 2024, condition: new, The LITech jaw crushers are ideal for pre-crushing extremely hard, medium-hard, hard-tough and brittle materials such as rubble, bentonite, soils, precious metals, ores, ferro alloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous -metal, slag and many, many more !! Ndedpfsg Ay Ayex Abyec