Used Itec for sale (184)

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use Lodpfxsxhdqts Al Iern The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: ready for operation (used), functionality: fully functional, The Carnitech C400 Grinder is engineered to meet the demands of industrial operators seeking efficient and consistent grinding with high throughput. Once integrated into a processing line, the C400 allows for precise handling of raw materials while ensuring a uniform texture. Its adaptability makes it particularly suitable for food processing plants that require both reliability and consistent performance. With its robust construction, the Carnitech C400 Grinder delivers stable operation even during intensive, continuous use. It maintains a steady throughput without fluctuations in quality, simplifying production management. As a result, operators benefit from a machine capable of reducing waste and improving the uniformity of finished products. The C400 can also be seamlessly integrated into existing processing lines, whether upstream or downstream of other equipment. Furthermore, this machine stands out for its ability to process a variety of products while maintaining consistent performance. Its design also promotes easy maintenance, minimizing downtime and maximizing overall equipment availability. As a refurbished pre-owned unit, the C400 represents a cost-effective solution without compromising industrial-grade efficiency. Ultimately, the Carnitech C400 Grinder supports optimized production workflows, enhancing productivity while ensuring consistently high product quality, making it a strategic asset for demanding industrial operators. Technical specifications: Power: 110 kW Grinder for frozen meat Dimensions: 3000 mm x 1550 mm x 2660 mm (L x W x H) Lrjdpfx Aoyw R Elel Ien Screw diameter: 400 mm

Condition: new, Year of construction: 2015, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 57 mm, measuring range Y-axis: 41 mm, measuring range Z-axis: 30 mm, total width: 240 mm, total length: 330 mm, total height: 720 mm, HITEC - Measurement Technology QCM 570 Exhibition machine, as new condition Year of manufacture: 2015 (RRP €27,000.00) - For highly accurate, repeatable measurements of complex workpieces - Various telecentric lenses - Camera system: USB 3.0 / 5 Megapixels - Automatic part program recognition M3 Software: - 23″ touchscreen - Flexible probe library, tolerance and programming functions - Visual display of Pass/Fail results with trend indication - CAD export Measuring range / field of view: 57 x 42 mm Length measurement deviation: 4.5 µm + L/50 (L in mm) Camera system: USB 3.0 / 5 Megapixels Incident light: 4-segment LED ring light Transmitted light: LED Height adjustment: 30 mm Lrsdpfx Aloyvur Te Ijn The measuring system can be inspected at any time at the Chemnitz location.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 400 h, product width (max.): 450 mm, working width: 450 mm, Material width 450 mm Print width 445 mm Jumbo rolls D 1000 mm Print length 228.6 mm to 609.6 mm 8 flexographic printing units 8 UV cassettes 2x hot air drying Printing speed max 150 m/min Feed printing unit +/- 4 mm Punching width 450 mm Punching length from 304.8 mm to 609.6 mm Rewind diameter D 800 mm Materials to be printed: Self-adhesive labels (paper, PET, BOPP, PVC) Paper from 30 to 200 gsm Film from 20my (BOPP), 35 my PVC/PET, shrink 12 my PET Cardboard up to 400 gsm Accessories: 16 impression cylinders 8 anilox cylinders 1 die-cutting cylinder 1 IEEC corona treatment (one-sided) 1 Meech web cleaning unit (double-sided) 2 punching units optional 1 turning cross 1 Delam/Relam Lrjdpfx Aljqa Ax No Isn 1 Coldfoil unwinder 8 LED cassette dryer GEW We would be happy to make you an offer.

Condition: used, Year of construction: 2009, operating hours: 556 h, 2009 | Iteco IT1215T (11,8 m) | Used Scissor Lift | 556 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 8900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 30 inspection points 25 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38014 Equippo" is commonly used when looking up more details online. Lrjdpfeyfitpjx Al Ion 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2006, operating hours: 667 h, 2006 | Iteco IG 10130 (9,85m) | Used Scissor Lift | 667 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 33 inspection points 28 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38002 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Lrodpfx Aloyc Ig Nj Ien 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), X-ray sorting system. Manufacturer: TITECH TOMRA Model: X-TRACT 1200 Year: 2012 The machine is in very good condition. Complete machine overhaul carried out. Source renewed: €35,000 All sensors replaced: €29,000 Belt replaced. Areas of application: - Metal sorting - Sorting of wood, production of refuse-derived fuels (RDF) - Sorting of organic waste Lrsdpoy Ra D Refx Al Isn

Condition: used, Year of construction: 2023, operating hours: 22 h, functionality: fully functional, machine/vehicle number: 61035145, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 393 cm³, injection pressure: 2,429 bar, injection weight: 140 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 120 mm, opening stroke: 950 mm, installation height: 450 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 6,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you here our certified and highly flexible stock machines: The base model injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, user-friendly operation, and short lead times. It is suitable for a wide range of applications, including packaging, electrical and electronics industries, medical technology, and automotive manufacturing. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Meeting demanding delivery schedules with a base machine concept offering a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM ▪ MC P1 with 15" TFT colour screen and multitouch functionality CLAMPING UNIT ▪ Clamping force: 1,200 kN ▪ Maximum mould opening force: 180 kN ▪ Clear space (h x v): 520 x 470 mm ▪ Mounting platen (h x v): 690 x 640 mm ▪ Mould installation height min. - max.: 180 - 450 mm ▪ Maximum opening stroke: 850 mm ▪ Maximum mould opening path: 450 mm ▪ Ejector drive: electric ▪ Ejector stroke: 120 mm ▪ Ejector force forward/backward: 27 / 33 kN Lrodey Rmwdopfx Al Ijn ▪ Ejector speed forward/backward: 300 / 300 mm/s ▪ Maximum mould weight: 850 kg INJECTION UNIT ▪ Screw diameter / type: 35 mm / standard ▪ Effective L/D ratio: 22.9 ▪ Injection pressure: 2,429 bar ▪ Stroke volume: 154 cm³ ▪ Shot weight at max. stroke (for PS): 140 g ▪ Injection speed: 200 mm/s ▪ Injection flow rate: 192 cm³/s ▪ Screw drive / rotation speed: 374 rpm ▪ Plasticising rate (standard screw): 18.9 g/s ▪ Nozzle contact force: 34 kN ELECTRICAL PARAMETERS ▪ Connected load: 22.7 kW ▪ Installed heating power: 11.5 kW ▪ Power supply: 200 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS ▪ Net weight with control cabinet: 6.7 t ▪ Length x width x height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT ▪ Wear-resistant plasticising unit ▪ BluePower full insulation for plasticising cylinder ▪ Open nozzle ▪ Air valve, single (BWAP) ▪ Pneumatic hot runner shut-off control, single ▪ Electrical interface for pneumatic cascade, 4-fold ▪ Euromap interface for handling: E18 + E67 ▪ Euromap central computer interface: E67, E77 ▪ Water manifold, 4-fold ▪ Electrical provisions for hydraulic auxiliary unit ▪ Automatic central lubrication ▪ Adaptive Process Control (APC) ▪ Injection-compression moulding mode ▪ Graphic analysis package ▪ Swivelling injection unit The machine is located at our Parsdorf facility and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Year of construction: 2002, condition: used, Vacuum suction cup for panels 4 zones Maximum 400kg Transport support Lsdeynf Stspfx Al Iorn 220V

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We now offer a flexible, reliable and affordable packing line based on 3 interconnected belt conveyors. The belt conveyors are a full 800 mm wide and are equipped with motors that can handle packages weighing up to 50 kg. The total maximum load per belt conveyor is 150 kg of simultaneous weight. The packing line is, for example, excellent for transporting packages/goods from manual packing tables to unloading, or as part of a simpler assembly line in manual production. The total length of the packing line is approximately 17 meters divided into the following 3 modules: - 2 belt conveyors with 7,950 mm in length - 1 belt conveyor with 1,080 mm in length. The packing line is equipped with 3 emergency stop buttons and a simple control cabinet where the speed of the conveyor belts can be adjusted with a simple control. The short belt conveyor is equipped with a gas spring that allows it to function as a stop function, i.e. if the track is lifted, the other conveyors stop. The conveyor tracks can also be purchased separately. Shipping is additional. Overview Model year: 2022 Dimensions: Height: 0.85 m / Width: 0.8 m / Length: 17 m Manufacturer: Flexitechs Ljdpfx Alewcgaie Isrn Year of manufacture: 2022 Height: 750 - 850 mm Width: 800 mm Length: 17,000 mm total, 2 tracks of 7,950 mm, 1 track of 1,080 mm Speed: Up to 1 m/s Maximum weight: Up to 50 kg/package

Condition: good (used), Year of construction: 1997, Manufacturer: MAWItec Maschinenbau | Model: Turnstar III | Serial Number: 1012 | Year of Manufacture: 1997 | Control: MAWItec CNC (integrated operator panel with screen and membrane keypad) | Operating Voltage: 400 V | Frequency: 50 Hz | Design: Enclosed production lathe | Headstock with automatic clamping system | Fully enclosed working area | Integrated coolant system | Dimensions: approx. 2000 mm x 3550 mm x 1900 mm (HxLxW) | The stated dimensions are approximate values. All other information provided without guarantee. | Red/Grey | Steel Lrodpfsyib A Uex Al Isn

Condition: used, functionality: fully functional, Slow-running plastic granulator – only 25 rpm, preventing thermal damage. Gear roller mill Goliath Plus 1 Milling chamber size (feed chute): 228 x 172 mm Power requirement only 1.5 kW Weight 230 kg (built like a tank) Dust-reduced, consistent granulate quality. Lrsdpfey Azp Esx Al Ion Easy cleaning in 2–3 minutes! Very quiet operation. Low energy consumption. Rotatable cutter elements for double the cutter unit service life Paddle level indicator in the discharge hopper: No "grinding in its own juice" possible, as the mill shuts down in advance.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2017, load capacity: 3,000 kg, Auction of a nearly new exhibition machine! Lrjdeygxabspfx Al Ion TECHNICAL DETAILS Load capacity: 3.0 t Number of suction pads: 8

Condition: good (used), Used stainless steel container Last application: Pharmaceutical Item number: 10717 Lrjdpsicnurjfx Al Ion Volume: 300 liters Type: Standing on 3 legs Height of legs: 780mm Material (media-contact): 1.4571 / AISI316 Design: Single-walled Operating pressure according to nameplate: ATM Max. operating temperature: 100°C Container dimensions: Outer diameter: 700mm Overall width: 810mm Overall length: 885mm Overall height: 2100mm Cylindrical height: 800mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: yes Distance from outlet to bottom: 510mm Outlet diameter: 47mm Various nozzles

Condition: used, Year of construction: 2000, Workstation with extraction and filtration system, suitable for dust extraction during plastering work with an angle grinder or also for welding operations. Lrodeyay Rhopfx Al Isn

Condition: used, Year of construction: 2008, turning diameter max 300 mm turning length max. 2000 mm control Siemens Serie 810D turning spindle Durchlass 90 mm 300 mm Lodpsudc Uzofx Al Isrn Feed speed 6/6 m/min. number of tools 8 quill stroke 300 mm diameter of quill 105 mm taper MK 6 coolant tank 100 l total power requirement 15 kW weight of the machine ca. 4650 KG

Condition: used, Year of construction: 2001, Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc Lrsdpfjvdd Uusx Al Ijn

Condition: used, Year of construction: 2017, Overview The winder was manufactured in 2017 by the Spanish manufacturer movitec. It is in operation until the end of September 2023 and can be visited at any time.  Technical data  Max. 120 pallets/ h (with 10 wraps) Dimensions (LxWxH): 5240mm x 3825mm x 4184mm Weight: 2.000kg  Foil width: 500mm  Main frame made of steel  Rotating ring with unwinding device for prestretch film Motorized prestretch system Cutting and welding system Scope of delivery  Protective fence  Winder | Movitec | Saturn S6 | 2017 Compressor | Josval | EDS-900 | 2016 Lodpol Uyfkjfx Al Isrn

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Furnishing: Cutting area 1,525 x 3,050mm Consisting of guiding machine, CNC control Plasma torch holder incl. torch height control, incl. Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Lrsdpfx Ajiid Hwsl Ien Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!

Condition: good (used), Year of construction: 2004, Carnitech CT3224 Double Shaft Paddle Mixer / Grinder Lsdpfxsmdruws Al Iorn Mixer grinder with associated trolley lift for 200 liter meat bins. Brand: Carnitech Model: CT 3224 Year: 2004 Mixer Capacity: 700 liter Machine Dimensions (LxWxH): 2.037x1.500x2.700 mm Machine Weight: 3.500 kg.

Condition: good (used), Year of construction: 2023, lifting height: 4,900 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 750 kg Ledpfxsy Dzpnj Al Ijrn Functional Lifting capacity: 230 kg Working height: 690 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Remanufactured: Yes Transport dimensions (LxWxH): (L/B/H): 1,49 m / 0,78 m / 1,99 m Surface type: Slab Additional information Please contact Tobias Mayr for more information

Condition: used, Surveillance camera, video surveillance, receiver, transmitter, video transmitter, transmitter amplifier Lodpfxsitapqe Al Iorn -Manufacturer: Ernitec, transmitter type BVT-65 orig -Voltage: 230VAC / 50-60Hz -Number: 3x transmitter available -Price per piece -Dimensions packaging: 180/130/H60 mm -Weight: 0.5 kg/pcs

Condition: used, Support grinding device, support grinder, support grinding device, circular grinding device, bench grinder, grinding machine, stand grinder, stand grinder, combination bench grinder -Grinding device -Voltage: 380V -Drive: 1.6/1.15 kW -Speed: 2800/1400 rpm Ledpfxod N D Ddo Al Isrn -Dimensions: 390/223/H240 mm -Weight: 20kg

Condition: used, Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, Touch Multi Panel -Manufacturer: Hitech, Touch Screen Panel Operator Interface Hitech 1700 Lsdpfxet Sbato Al Iern -Type: PWS1720-STN -Dimensions: 205/70/H160mm -Weight: 1.4 kg

Condition: used, Air bellows, roller bellows, air cushions Lrjdpfx Alob A Tfzs Isn -Number: 2 pieces -Manufacturer: Contitech -Type: 644 N -Package price -Weight: 2 kg