Used International 733 for sale (8,950)

Condition: excellent (used), Ball valve, ball valve with internal thread Rcjdpodz A Tfofx Adzof -Condition: very good, unused, original packaging -Material: Pressed brass -Internal thread: 2" inch -full: passage, full ball -Number: 63 ball valves available -Price: per piece -Weight: 2.1 kg

Condition: good (used), functionality: fully functional, grinding depth: 210 mm, center height: 510 mm, spindle speed (min.): 9,000 rpm, spindle speed (max.): 15,000 rpm, grinding length: 1,800 mm, rotational speed (max.): 15,000 rpm, rotational speed (min.): 9,000 rpm, Spindle Speed Min: 9.000 Rpm / Max: 15.000 Rpm Centre height Min: 230 mm / Max: 510 mm Rcedpfx Asyg Hduedzsf Spindle stroke 210 mm Horiz. Table size 700 x 1.000 mm Table stroke 1.800 mm Featured with : - Feed on table - Feed on hor. Movement - Cooling unit - Safety doors

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head, B-axis Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Rcjdozwmz Topfx Adzjf Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Rcodpjzim A Iofx Adzjf Dimensions: 2,150mm tan to tan x 1,600mm diameter

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: Rcodpfx Aozwv N Todzof - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, volt / V ampere / A weight / kg total power requirement / kW Rsdey Tbw Repfx Adzocf SCHORCH - K 733 / 4M - RM.12807/27 Type: K 733 / 4M Revolution: 1430 rpm 50Hz 15.2A 380v Weight: 80kg

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231656, HAAS DT-1 CNC machining center – manufactured in 2010 For sale is a HAAS DT-1 CNC machining center, manufactured in 2010, equipped with a 3+2-axis system, a Renishaw measuring probe, and a KUKA KR 5 sixx R850 WP. Technical data Manufacturer: Haas Model: DT-1 Year of manufacture: 2010 Machining: 3+2-axis Cycle time: 4,962 h Feed time: 3,079 h CNC control: Haas Chip conveyor: Integrated screw conveyor system Measuring probe: Renishaw Internal cooling (IKZ): present, currently defective Automation – KUKA KR 5 sixx R850 WP, control panel currently defective Dimensions of the robot cell Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 800 mm Dimensions including infeed and outfeed Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 2,400 mm Redpfezwk Iwox Adzecf The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm Rjdpfxoyif Nle Adzecf table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: excellent (used), pulling force - max. 3 t max. ram stroke 1000 mm max. workpiece diameter 500 mm table surface area 500 x 400 mm tool length - max. 1200 mm total power requirement 1,5 kW Rcsdozu Tn Iopfx Adzof weight of the machine ca. 0,4 t dimensions of the machine ca. 1,0 x 0,8 x 1,5 m round table (450 mm) with indexing, many accessories.

Condition: used, Year of construction: 2011, machine/vehicle number: IntNr231315, Technical Data – used LNS FOX IFS WS 500 Feature Specification Model FOX IFS WS 500 Year of manufacture 2011 Airflow rate approx. 500 m³/h Motor power approx. 0.37 kW Voltage 400 V / 50 Hz (typical) Weight approx. 35 kg Dimensions approx. 465 × 500 × 1,145 mm (W×D×H) Filter stages 1. Pre-filter F5 2. Centrifugal separator 3. Post-filter F5 (optional HEPA H13) Filtration efficiency 99% at ≥ 1–2 µm (F9), optionally HEPA 99.95% at ≥ 0.1 µm Noise level approx. 65 dB (WS2 mod. similar) Accessories & Features • Compact design for direct installation on or beside CNC machines • Stand for extraction • Three-stage cleaning for effective oil and coolant mist separation • Cartridge filter can be retrofitted with HEPA kit • Easy maintenance, low noise operation, and long-life filter elements Rcsdpfx Aezvuzrjdzef Subject to technical changes, errors and prior sale!

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Rjdpfxozww Sie Adzocf Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T

Condition: used, External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Grinding wheel: Ø 300 mm Auto pass plug Swivel table External hydraulic group External lulbricant tank Rjdpfx Adezww Rfjzecf Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T

Condition: used, External/Internal Cylindrical Grinding JONES-SHIPMAN type 1310 Capacity: Ø 200 x 450 mm (8'' x 18'') Tilted table Grinding wheel: Ø 300 mm x thickness 25 mm x bore Ø 125 mm Drive wheel speed: 1750 and 2300 RPM Rotary grindstone holder support Supplied without internal grinding spindle Equipped with 1 lubricant tank Voltage : 380 V Length: 1800 mm Depth: 1600 mm Total height: 1900 mm Rjdpfjzww I Rjx Adzocf Weight: approx 2 T

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, spindle speed (min.): 10,000 rpm, spindle speed (max.): 60,000 rpm, Equipment: rotational speed infinitely variable, Overbeck overhauled in 2015 and equipped with fast frequency spindle SC3060-V1000, frequency converter SD2T 3.8kVA and cooling unit PHK525 HZ, cooling capacity 550W Rcjdsu Aqt Eopfx Adzjf

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Rcodpfsurw Uyex Adzjf Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 81019 01, grinding depth: 500 mm, grinding diameter: 800 mm, grinding spindle speed: 250 rpm, workpiece diameter (max.): 800 mm, pivoting range: 15 °, Machine in special design with increased diameter and extended, hydraulic transverse movement! Reconstructed and modernized in 1995 at the manufacturer's plant in Glauchau, and put into operation in 1996. TECHNICAL DETAILS Working area and grinding diameter Internal grinding diameter: 30–630 mm Extended internal grinding diameter max.: 800 mm External grinding diameter max.: 800 mm Workpiece diameter max.: 800 mm Grinding area and table movement Grinding depth: approx. 500 mm Table stroke: 800 mm Diameter of workpiece protection ring max.: 800 mm Diameter without workpiece protection: approx. 850 mm Distances and adjustments Distance workpiece spindle head – grinding spindle carrier: max. 1,225 mm Adjustment of internal grinding device on the table: max. 545 mm Transverse movement of workpiece spindle stock: max. 650 mm Swiveling of workpiece spindle stock: max. 15° Workpiece spindle Workpiece spindle speeds: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 rpm Workpiece weight: max. 1,000 kg Spindle head: DIN 55021, size 11 MACHINE DETAILS Control and position display Control type: conventional Transverse adjustment: via geared motor and positioning device Digital position display: HEIDENHAIN, 2 axes Coolant system Coolant system: with magnetic separator Dimensions & Weight Machine: 4100 x 2200 x 2500 mm Europallet with accessories Coolant tank: 1700 x 800 x 750 mm on Europallet Machine weight: approx. 6.4 t EQUIPMENT Coolant system with magnetic separator Fixators or machine feet Various grinding wheels Diamond dresser Large grinding plate Internal and surface grinding device Halogen machine lamp Machine documentation Rcodezqcvtjpfx Adzjf

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,390 h, load capacity: 3,300 kg, lifting height: 6,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 75 kW (101.97 HP), fork length: 1,200 mm, empty load weight: 7,700 kg, total length: 4,970 mm, drive type: Diesel, construction width: 2,390 mm, Rigid telehandler Redpfeyfivksx Adzjcf Mast type: telescopic Speed class: 20 Technical condition: good Front tyres type: pneumatic Front tyres size: 500/80-24 Front tyres condition: 80–100% Rear tyres type: pneumatic Rear tyres size: 500/80-24 Rear tyres condition: 80–100% 3rd valve,

Condition: used, functionality: fully functional, power: 85 kW (115.57 HP), fuel type: diesel, empty load weight: 7,700 kg, lifting height: 6,900 mm, mast type: telescopic, Year of construction: 2022, operating hours: 345 h, total length: 4,970 mm, construction height: 2,380 mm, fork length: 1,200 mm, drive type: Diesel, load capacity: 3,300 kg, construction width: 2,390 mm, Rigid telescopic forklift Mast type: Telescopic Speed class: 20 Technical condition: very good Front tires Type: Pneumatic Front tires Size: 500 80 24 Front tires Condition: 80 - 100% Rjdpfx Asu Dyftodzocf Rear tires Type: Air Rear tires Size: 500 80 24 Rear tires Condition: 80 - 100% Description: Are you looking for an efficient, powerful and comfortable machine? Then the MLT 733 with at least 115 HP, the telescopic handler designed for agricultural transport work with a lifting height of 6.88 m and a lifting capacity of 3.3 t, is made for you! Top priority comfort: This machine is characterized by a completely new, easily accessible cab with optimum visibility, the JSM® (Joystick Switch and Move) with adjustable armrest, DSB (Double Switch Buttons) and sound insulation ideal for long working hours. Top priority performance: With this telehandler, you can achieve exceptional results thanks to the 115 hp Deutz engine and torque converter transmission. Its self-locking differential, 41 cm ground clearance and automatic spiral fans are perfectly adapted for agricultural use. Top priority efficiency: The MLT 733 with at least 115 hp is equipped with a variable displacement pump (up to 150 l/min) 3rd valve, rear working lights, front working lights, air conditioning,

Condition: good (used), Year of construction: 1980, Info: The machine was installed in a pit! - Pulling force: max. 25,000 kg - Stroke height: max. 630 mm - Working speed: 1 - 10 m/min Rjdpfx Adszvfpmezecf - Return speed: 7 - 25 m/min - Total power requirement: 45 kW - Machine weight: 5,500 kg Transport and loading can be organised across Europe upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS & MORE. Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? For further information or contact options, you can reach us via the contact form.

Condition: good (used), Year of construction: 2004, - Traction force: max. 160 kN - Broaching stroke: max. 1000 mm - Workpiece feeder stroke: max. 630 mm Rjdpjzvfpgsfx Adzjcf - Table width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg Transport and loading can be organized throughout Europe at an additional cost, upon request. Prices plus VAT Inspection is possible by appointment. Please contact us, our team looks forward to assisting you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality, yet affordable machine for your production? Or do you wish to sell yours? For further information or contact options, reach us via the contact form.

Condition: used, Year of construction: 2021, load capacity: 3,300 kg, lifting height: 6,900 mm, fork length: 1,200 mm, total length: 6,000 mm, - Max. Tragkraft 3300 kg - Max. Hubhöhe 6,90 m - Max. Auslage 3,90 m - Ausbrechkraft mit Schaufel 5770 daN - Kippwinkel 12° Rjdpfxsxd Hqbe Adzjcf - Schüttwinkel 114° - Wenderadius (über Räder) 3,80 m - Heben 8,3s - Senken 6s - Teleskop ausfahren 7,30s - Teleskop einfahren 4,50s - Ankippen 3,40s - Auskippen 2,80s - Motor Hersteller: Deutz - Motornorm: Stage 5/Tier iV Final - Motor Modell TD 3,6l - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4-3621 cm³ - Nennleistung Verbrennungsmotor - Leistung kW 75Hp / 55,4 kW - Max. Drehmoment / Motordrehzahl 340 Nm @ 1600 rpm - Zugkraft 8360 daN - Typ: Drehmomentwandler - Anzahl der Gänge (vorwärts/rückwärts) 4/4 - Max. travel speed 24,90 km/h - Parkbremse Handbuch - Feststellbremse - Hersteller der Achsen: Dana - Pumpenart: Zahnradpumpe - Hydraulikfördermenge / Hydraulikdruck 92,70 l/min / 260 Bar - Motoröl: 10 l - Hydrauliköl: 128 l - Fassungsvermögen des Kraftstofftanks: 120 l - Geräuschpegel im Fahrerstand (LpA): 79 dB(A) - Umgebungsgeräusch (LwA) 104 dB(A) - Schwingungsbelastung Hand/Arm:

Condition: good (used), Year of construction: 1986, grinding depth: 500 mm, Grinding depth: 500 mm Internal diameter: 20...400 mm Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Rsdpfszwkwrox Adzocf Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: ready for operation (used), HAGEN & GOEBEL / Internal thread cutting machine Rcsdpozu Nzwjfx Adzef -Type HG 22 EB -Speed range 180 - 1120 rpm -Thread size up to max. M22 / steel -Thread size / cast iron up to max. M 27 -Thread size aluminum / brass max. M 33 -Smallest thread size M6 -Single stroke / continuous stroke -Table dimensions 600x500mm Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1000 kg Errors and omissions excepted.

Condition: used, Measuring instruments for measuring internal diameters – used bore gauge Internal micrometer – tube construction with interchangeable extensions, measuring head with extensions, internal measuring screw set in a case. Rsdpfxezux Nkj Adzecf Measuring screw, measuring range for internal diameter 200-225 mm, scale value 1/100. With extensions: 25 mm 50 mm 100 mm 200 mm 400 mm Price on request. All technical specifications are subject to typographical errors and errors. Sale exclusively to countries within the EU.

Condition: used, Internal measuring instrument, 2-point internal measuring instrument set, borehole measuring instrument Manufacturer: Mitutoyo Used Redpezul Hvsfx Adzocf Measuring range [mm]: 18-150 Testing equipment in original packaging 2 pieces, each in the original case The case contents are not complete; does not include a dial indicator. Price upon request All technical specifications are subject to typographical errors and errors. Sale exclusively to countries within the EU.