Used International 2674 for sale (9,592)

Condition: used, tank capacity: 12,280 l, GENERAL Design: rectangular Notes: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in leg length (to be considered during installation) Cpodpfjycku Njx Agzow Overall width: 1,500 mm Overall height: 2,970 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Volume: 12,280 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Base type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,468 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approximately 340 x 440 mm in the front base; minor dents on the top head; total height indicated is estimated; foot ends were cut off during dismantling and are supplied loose (total current height with cut foot ends approx. 2,650 mm) Overall width: 1,290 mm Overall height: 2,950 mm Overall length: 4,450 mm Heating/Cooling: available Location: Bremen Cpodpfx Ajycku Ajgzew Volume: 10,468 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: wine storage TANK Support type: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Material of temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 10,460 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; small dents on the top cover; feet partially reinforced with stainless steel plates; 1 dent in the front bottom (see photos) Total width: 1,280 mm Total height: 2,870 mm Total length: 4,450 mm Heating/cooling: available Location: Bremen Capacity: 10,460 liters Cpjdpjyckuvsfx Agzsw Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support: feet Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL QUALITY Temperature control system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 13,650 l, GENERAL INFORMATION Design: rectangular Remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 340 x 440 mm in the front bottom; minor dents on the top plate Overall width: 1,450 mm Overall height: 2,780 mm Overall length: 4,400 mm Heating/Cooling: included Location: Bremen Volume: 13,650 liters Csdpfx Aeyckuisgzspw Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: legs Number of legs: 7 pcs. HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Legs material: stainless steel

Condition: used, tank capacity: 11,320 l, GENERAL Design: rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; minor dents in the top cover; 1 side wall slightly pushed in Total width: 1,230 mm Total height: 2,830 mm Total length: 4,400 mm Heating/cooling: available Location: Bremen Volume: 11,320 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: wine storage TANK Support type: feet Cpsdjyckucepfx Agzew Number of feet: 7 pcs HEATING/COOLING JACKET Internal temperature control: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Cpedjyckt Espfx Agzow Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Cpsdpfxoycktre Agzow Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX C60 with internal FIERY EX-i C60/70 & Offsetting Catch Tray for sale. Counter: ONLY 849.369 prints total This machine was fully and professionally checked in the seller's workshop and is in impeccable condition with excellent print image quality. Cedpfsyrr T Ssx Agzjpw Please contact us with questions! We will be happy to help you!

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX C60 with internal FIERY EX-i C60/70 & Offsetting Catch Tray for sale. Counter: ONLY 528.762 prints total Cjdsyrr Tlopfx Agzjpw This machine was fully and professionally checked in the seller's workshop and is in impeccable condition with excellent print image quality. Please contact us with questions! We will be happy to help you!

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX C60 with internal FIERY EX-i C60/70 & Offsetting Catch Tray for sale. Counter: ONLY 686.424 prints total This machine was fully and professionally checked in the seller's workshop and is in impeccable condition with excellent print image quality. Cedpfx Agexn Uu Njzspw Please contact us with questions! We will be happy to help you!

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: Cpjdpfx Aegigv Dsgzsw 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Cedpfstqlq Eox Agzepw Adjustable slip clutch Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Condition: used, Flowveyor International Ltd aeromechanical conveyor Cedpfxeyf Azts Agzopw Cable conveyor Suitable for conveying powders Tube diameter: 76.1 mm Conveyor made of stainless steel Cable is made of food-grade plastic-coated cable Motor power: 1.5 kW Lifting height: 2350 mm (adjustable) See our other listings VMA Wekerom

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Cpjdpoxyllvjfx Agzew Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Year of construction: 1989, centre height 250 mm centre distance 600 mm Dimensions (L/W/H) 3600 x 1900 x 2100 mm Codpfx Agsxzuzcozopw weight of the machine ca. 2,25 t

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 Cedpfeurw Uyjx Agzjpw 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm total power requirement 25 kW Codpfeycxlcox Agzspw weight of the machine ca. 4,2 t

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m Cpodjw Rv Taepfx Agzow There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: good (used), JUNG D22 - Internal Cylindrical Grinding Machine - Machine suitable for internal grinding / plunge grinding - Smallest grindable bore: 14 mm - Largest grindable bore: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece spindle speeds: 46-270 rpm - Spindle head swivels right/left: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm - Worktable / tilting forwards and backwards: 5 degrees each - Manual / automatic operation - Taper grinding attachment - Steady rest - Three-jaw chuck - Spare grinding spindles (see photos) Codpfxeyh Hhgo Agzepw Dimensions: LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: used, DVS UGRIND 800 is a CNC external and internal grinder, engineered for precision, high accuracy and reliability. Handles workpieces Ø 130–500 mm; Z axis 1200 mm, X axis 250 mm. Grinding spindle 25 kW; workpiece spindle motor 24 kW; speeds 0–500 t/min stepless; supply 50 Hz 3x 400 V; weight ~7000 kg; L2850×W2490×H2290 mm; operating time 12000 Heures. Accessories: coolant system, coolant filter system, measuring feeler gauge, set of flanges for internal grinding, set of flanges, lamp, tool cabinet, electronic handwheel. Capable of achieving tight tolerances; typical applications: automotive, machine tools, aerospace, medical, watchmaking. Codpfx Aoycimkogzepw

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Cjdpfxoxyk S Ue Agzopw

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Cjdpfx Aoyg Nvtjgzspw

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Cjdex Uq T Djpfx Agzspw

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Csdpfx Aexf Ikfegzopw

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr231474, KEYENCE Model Series IM-6020, Year of Manufacture 2012 For sale is an optical measuring machine, KEYENCE IM-6020, in good, fully functional condition. The IM series is recognized for fast, high-precision, and operator-independent measurement, making it ideal for use in quality assurance, goods-in inspection, and production monitoring. Technical specifications (overview): Model: IM-6020 Year of manufacture: 09/2012 Measuring principle: Optical / non-contact Measuring range (X/Y): approx. 200 × 200 mm Measuring range (Z): Height measurement via autofocus Measuring accuracy: up to approx. ±2 µm (depending on measurement conditions) Repeatability: Very high, operator-independent Camera: High-resolution CCD camera Illumination: Incident light / transmitted light / contour illumination Measuring functions: - Length, angle, radius, and diameter measurement - Contour and form measurement - Comparative measurement (OK/NOK) - Automatic dimension recognition Cpsdpfx Aoycf Ecjgzow Software: KEYENCE IM software for quick program creation Measuring time: A few seconds per component (even for multiple features) Condition: - Used - Well maintained - Fully operational - Ready for immediate use Machine dimensions: approx. 900 x 500 x 1500 mm Machine weight: approx. 32 kg The machine can be inspected by appointment. Subject to prior sale and changes or inaccuracies in the technical data and specifications.