Laminating installation

KOMFI AMEGA 52 LAMINATOR

Condition: used, STC Film Wrapping machine, Machine used for packing champignon. Capacity 40-80 pack/min. Itjdjc Nlxropfx Amlsf

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Iedpjxz Ewnsfx Amljtf

Condition: used, machine/vehicle number: 59062, Rill- und Leimmaschine für Umschläge - Creasing & Gluing machine for Covers Karl Tränklein CGM (b)Serial-No. 59062/5 Working width max. 500mm Online-Video-Inspection by Skype-Video Itsdpfx Ash Axd Nomlsf We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. Itjdpfx Amov Radxjlof The machine is used and is sold without warranty. Inspection is possible and welcome. Loading facilities available.

Condition: used, Year of construction: 2016, Year: 2016 Condition: refurbished - very good condition - new steel roller + heating - new pressure roller with Teflon treatment - new bearings on main rollers - refurbished extraction and separation rollers - new suction cups - new perforation and deflection wheel Configuration - automatic loading - suction loading head - automatic separation Iodpfx Aexvbgnjmlotf - unloader - Jogger Technical specifications: - maximum lamination speed - 20 m / min. - sheet loading - automatic - loading system - Heidelberg suction loader - loading table capacity - 54 cm - sheet overlap regulation - automatic PLC controlled - overlap accuracy - + / - 2 mm - separation of laminated sheets - automatic, by cycling rollers - paper thickness - 115 - 500 gsm - main roller pressure - pneumatic - external compressor - 150 l / min, 6-8 bar - min. sheet size (w x d) - 20x 30 cm - max. sheet size (w x d) - 53 x 74 cm - max. output - 1650 B2 / hour - roller heating time - 8 min - temperature control - 80 - 140°C -

Condition: good (used), Year of construction: 2002, Format trimmed: max 300 x 400 mm, min 85 x 115 mm Itsdpeqqkvqefx Amlef Untrimmed format: max 320 x 460 mm, min 100 x 125 mm Output: max 6,600 c/h Equipment: - Fully automatic infeed with integrated stack counter - Cut counter - Cutting blower - 1 set of pressing plates and holders - 1 set of plate tables - 3 sets of cutting bars - 2 sets of knives - External device for knife change with setting gauge - Central lubrication - Operating instructions - Electrical circuit diagrams - Standard tools - Standard accessories

Condition: good (used), Year of construction: 2006, Horizon Stichliner SL5500: Gathering towers VAC 60a+m+m+m ST40, Horizon ASF 30, SPF 30 Itsdpfx Ajvmfxgomlef Trimmer HTC 30 Counter reading only 14.2 million

Year of construction: 2002, condition: excellent (used), JEWA Flexo Rotonir SM52: M.No.: 02010-0017 Itodpfxod Nd T Uo Amlef BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001

Condition: used, Dreimesserautomat / Three Knife Trimmer Hörauf SN-140 Demand Baujahr / Year 2000 - Serial-No. 405060080 Formatbereich (unbeschnitten) / Paper size (before cutting) min. 80 x 60mm - max. 410 x 315mm Formatbereich (beschnitten) / Paper size (after cutting) min. 80 x 60mm - max. 380 x 300mm Stapelhöhe / Pile height max. 80mm Isdpfswnpm Nsx Amljtf Leistung bis zu 20 Takte/min. / Speed approx. 20 cycles per minute Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits Itjdpfxowh Tq So Amlef • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.