Used Cross Folder for sale (5,019)

Condition: used, Format: 310 x 432mm Equipment: roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: max. 310x432mm; min. 125x130mm Hsdpfxjx N I Uho Al Tonr paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg

Condition: used, We offer for sale a Horizon AFC-744S Cross Folder in used working condition. The machine is currently installed in a printing facility and is available for inspection. It is suitable for professional post-press production and high-quality folding work. Machine details: Manufacturer: Horizon International, Inc. Model: AFC-744S Cross Folder Serial No.: 354002 Configuration: 4 folding cassettes + knife + cassette + knife Maximum sheet size: 738 × 1100 mm Minimum sheet size: 210 × 297 mm Power supply: 400V, 3-phase, 50/60Hz Made in Japan Condition: The machine is in used working condition. It has been installed in a production environment and shows normal signs of use. Available for inspection before purchase. Included: Horizon AFC-744S folding machine 4 folding cassettes Cross-folding knife unit Additional cassette and knife section Feeder and delivery system as shown in the photos Hodpszfivvsfx Al Tenr Control panel / operating screen Additional information: The machine is sold as shown in the photos. Dismantling, loading, transport and installation are not included in the price unless agreed separately. For more information, additional photos, video of the machine in operation, or to arrange an inspection, please contact us.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Hnjdpfx Aozp H R Eel Tor Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: good (used), Strati Anden 660A Folder Gluer The machine is in very good condition, recently inspected, regularly serviced, and maintained. This single-point machine includes a right and left gluer. Year of manufacture: 2015 Width: 660mm Maximum speed: 180m/min Maximum paper weight: 600gsm Hnodozlah Njpfx Al Tsr Power: 4.5kW Power supply: 230V External dimensions: 750x105cm Weight: 1800kg Includes a set of documents and a pallet of small parts.

Condition: like new (used), Range (depending on lighting conditions): up to 15 m Hnedpod Ecncjfx Al Ter Range with laser receiver: 30 m and more Leveling accuracy at 5 m: +/- 1 mm Self-leveling range: 4° +- 0.5° Accuracy of the horizontal line at 5 m: +- 1.5 mm Accuracy of the vertical line at 3 m: +- 0.75 mm Number of laser lines: 2 Weight: 485 g

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 338002, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 31/12/2025! EQUIPMENT Hjdoxyf T Tspfx Al Tjnr 6 folding pockets, electrically adjustable Altar folding pocket

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg Hjdpfxsfv Hpho Al Tonr

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Cardboard from 210-800 gsm Corrugate A/B/E Crash lock 300 meter per minute Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns unit 2end and 4th creasing Remote control Hnsdpjtq E U Ssfx Al Tor Lenght 12.5 m 12KW

Condition: excellent (used), Year of construction: 2006, Ref:11128 . 2006 Longford Inserter-Folder Primarily for the production of greetings cards, but can produce other inserted products at high speed. Comprising; Upper C700 Friction pile feeder for insert, top-loading, bottom feeding. Lower C700 Friction pile feeder for main product, top-loading, bottom feeding. Feeders can be configured in either a single or batch feed mode. Easily integrate with OEM equipment. Heavy duty scoring roller shafts. Robatech IK 40/4 glue control unit. Hedpfxszmydaj Al Tsnr PVA cold gluing system with single head. Longford digital control unit Automatic counter with batch marking Belt folding element Hydraulic variable speed Stream delivery conveyor Including accessories, tools and manuals. Specification: Sheet size, Max: 355 x 254 mm Folds to: 177 x 254 mm Min: 102 x 102 mm Folds to: 38 x 76 mm Stock weight : 100 – 400 gsm2 Belt speed : up to 175m/min.

Condition: used, Year of construction: 2007, total width: 1,070 mm, total length: 9,000 mm, total height: 1,420 mm, Colour: Blue Weight: 1.500 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 48-2007-1403 - Main motor power [kW]: 5.5 - Max. cutting depth [mm]: 320 - Max. cutting height [mm]: 100 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 30 - Table length [mm]: 5000 - Table width [mm]: 350 - Spindle speed control: Not applicable - Voltage [V]: 400 - Current consumption [A]: 10.3 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 9000mm x 1070mm x 1420mm (l x w x h) - Transport weight [kg]: 1500kg Hsdpozufv Refx Al Tjnr - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Hnedpfxjdy Hrdj Al Ter Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm Hodozryuvepfx Al Tonr

Condition: used, Year of construction: 1966, machine/vehicle number: 4643, Usable length: 2500 mm Hnjdpfx Aljzuwm Io Tjr

Condition: good (used), functionality: fully functional, Year of construction: 2005, Hydraulic Swivel Bending Machine Manufacturer: TENSOL, Type: H200.60 Year of Manufacture: 2005 Technical Data Manufacturer: TENSOL Type: H200.60 Year of Manufacture: 2005 Usable Length: 6000 mm Capacity: 2 mm Motor Power: 7.5 kW Dimensions: approx. L 7.00 x W 1.60 x H 2.20 m plus hydraulic unit (1.1 x 0.7 m) Weight: approx. 8 tons Equipment Hodpjzumhhofx Al Tsnr • 2D graphics control • Automatic sheet thickness adjustment • Controlled rear stop, 1000 mm • Overhang 1050 mm • Automatic roller shear • Bending rail 10 mm • Reinforcement rail 15 mm All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2026, ABKANTBANK-Technik KRUSE, your competent partner for bending machines. Free delivery up to 150 km. Standard equipment includes piano inserts (segment-divided upper, lower, and bending beams) for a wide range of bending options. Cassettes and special profiles with opposing bends can be easily manufactured with this model. Swivel bending machine, universally applicable for sheet metal workers, repair shops, and roofing companies. Segments can be individually moved and removed. Segmented tools on all beams allow for ample space for complex workpieces. Bending machine SGR 1250/1.5 Technical data: - max. working width: 1250 mm Other dimensions 1000 mm and 1400 mm available upon request. - Segments: 30, 40, 50, 60, 70, 100 mm Hnsdpfx Alszuvbwj Tor - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.5 mm - Weight 250 kg Option to mount a guide rail for a roller shear: 300 EUR Accessory: roller shear (up to 0.8 mm): 350 EUR All prices are subject to 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Shipping within Germany: 220 EUR.

Condition: new, Year of construction: 2026, This machine is located in Halver. We are your competent partner for bending machines. We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we address the needs of our customers on site and consider ourselves an extension of the production department. Upon request, we can demonstrate the corresponding machines and provide expert advice and professional training. We offer individual advice tailored to your needs and look forward to your inquiry. The SGR-1000 model is characterized by removable upper and lower segments. In addition, the bending beam is divided into segments. Furthermore, a foot lever is mounted to open the upper bending beam. - Segments of an upper and lower clamping beam expand the range of applications. - Blocking with the help of a pedal allows the hands to be free, and a sheet can be freely positioned. - Bending machine for universal use in repair and body shops. - Compact design, modern shape. - Manual bending machine for standard tasks. - Segments of an upper clamping beam expand the bending possibilities. Technical data: - max. working width: 1000 mm - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.5 mm - Weight 235 kg Option for mounting a guide rail for a roller shear: 300 EUR Accessory roller shear (up to 0.8 mm): 350 EUR All prices are subject to 16% VAT. Hnodpfezuva Tjx Al Ter CE certificate Warranty: 12 months. Self-collection Shipping within Germany: 180 EUR

Condition: new, Year of construction: 2026, ABKANTBANK-Technik KRUSE, Your competent partner for bending machines. Standard equipment includes piano inserts (segment-divided upper, lower, and bending jaws) for a wide range of bending options. With this model, it is easy to produce cassettes and special profiles with opposing bends. Swivel bending machine, universally applicable for sheet metal workshops, repair shops, and roofing companies. Segments can be individually moved and removed. Segment bending machine SGR 1400/1.5 Technical data: - max. working width: 1400 mm Other dimensions, 1000 mm and 2050 mm, available upon request. - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.5 mm - Weight: 285 kg Option to mount a guide rail for a slitting shear: 300 EUR Accessory: Slitting shear (up to 0.8 mm): 350 EUR Hedpezuva Hjfx Al Tonr Please note that all prices are subject to an additional 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Shipping within Germany: 180 EUR.

Condition: new, Year of construction: 2026, The ZGR1400/2.0 press brake from Prod-Masz is available on-site for testing and immediate purchase. Free delivery up to 150 km. You will receive on-site technical training. -Working width: 1400 mm -Sheet thickness up to 2.0 mm (non-ferrous metals) -Bending angle up to 145° -Throat: 80 mm Hnsdpfozuvbkjx Al Tsr -Degree scale -Stop for pre-set bending angles -Sheet metal storage -Front depth stop -Weight: approx. 175 kg -CE certificate -12-month warranty Accessories - Roller shear (up to 0.8 mm): 350 EUR Shipping within Germany: 180 EUR Please note that all prices are subject to an additional 19% VAT. Self-collection is possible. Other dimensions (1000, 1400, 2140, 2640, 3140, 3640, 4140 mm) are available upon request.

Condition: new, Year of construction: 2026, BENDING BENCH technology KRUSE, YOUR competent partner when it comes to BENDING BENCHES Standard with piano inserts (segment-divided upper, lower and bending beam) for a large number of bending options Cassettes and special profiles with opposite bends are easy to produce with this model Swivel bending machine universally usable for tinsmith shops, repair shops and roofing companies Segments can be moved individually and removed Cant bench SGR 650/1.0mm Technical specifications: - maximum working width; 650mm - Bending angle max. 160° degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) Hnedpjzuvbdofx Al Tor - degree scale - passage 50mm Total length: 1000mm Height: 450mm Weight 60kg All prices are plus 19% VAT. Certificate CE Guarantee: 12 months. Pick-up is possible Shipping within Germany €100

Condition: new, Year of construction: 2026, SERVICE CENTER HALVER FOR BENDING TECHNOLOGY. Your competent partner for bending machines. We are your contact for high-quality sheet metal processing throughout Germany. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we address the needs of our customers locally and see ourselves as an extension of the production department. If required, the machines can be demonstrated, along with expert advice and professional training. We offer individual advice tailored to your needs and look forward to your inquiry. The Prod-Masz RED2200/0.8 bending machine, mounted on transport rollers with a 60mm/45° cutout, is available for testing and immediate purchase. Technical data: -Working width 2140mm -Sheet thickness - steel up to 0.8mm -Non-ferrous metals 30% greater sheet thickness -Bending angle up to 145° -Bending flange: 15 mm -Throughput: 80 mm Hsdjzuvayepfx Al Tenr -Degree scale -Stop for pre-set bending angles -Storage for sheets -Front depth stop -Weight approx. 250kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140mm) available upon request. Please note that all prices are subject to 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Accessories: Roller shear 350 EUR Shipping within Germany 180 EUR

Condition: used, Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the sturdy milling unit ensure consistently precise profiles in both batch and single-piece production. Technical data: - Working width: approx. 1,000 mm - Spindle diameter: 40 mm Hnedsztvxgopfx Al Tjr - Feed: Pneumatic

Condition: used, Year of construction: 1999, total height: 1,800 mm, total length: 5,700 mm, total width: 2,300 mm, Colour: White Weight: 2.000 kg Hedpfx Alozmxvzs Tsnr - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 10.7488 - Main motor power [kW]: 6.3 - Max. saw length [mm]: 5200 - Max. saw width [mm]: 360 - Max. saw blade diameter [mm]: 600 - Input table length [mm]: 5200 - Output table length [mm]: 3300 - Options: Automatic pusher system - Transport dimensions: 5700mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1979, Available immediately ex-works: Swivel bending machine, Lotze Type 161 / 2500 / 6 Year of manufacture 1979 Hjdpfxozukhre Al Tonr Bending length 2550 mm Material thickness up to 6 mm Drive power 7.5 kW Weight 6 tons Price: EUR 6,750.00 plus VAT, ex-works.

Condition: used, Dimter OptiCut 700 automatic optimising cross-cut saw (sliding saw) for cutting very wide timber to size according to defects (marked with fluorescent chalk) and length. Technical data: - Cutting height: max. 120 mm - Feed length: max. 5,500 mm - Cutting width: max. 700 mm Hjdpfxszryvao Al Tjnr - Saw blade diameter: max. 700 mm

Condition: used, Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Hjdpfx Aezryupjl Tsnr Technical data: - Cutting height: 260 mm - Saw blade diameter: 500 mm - Inlet length: 400 – 6,300 mm - Inlet thickness: 12 – 80 mm - Feed rate: max. 250 m/min - Cycle time: approx. 1 sec - Saw motor: 7.5 kW - Marking station: 5,000 mm - Outfeed conveyor: 7.5 m with 3 pneumatic ejectors - Control system: OptiCom Pro - Year of manufacture: 2022