Used Inserter for sale (1,872)

Condition: good (used), Hand lever shears, long knife, sheet metal and round steel shears, lever shears -Mubea: sheet metal and round steel shears -Cutting insert length: 200 mm -Dimensions: 380/160/H1240 mm Lodpfx Aofgi Nmja Eota -Weight: 22 kg

Condition: used, Year of construction: 2012, functionality: fully functional, Documented Modifications/Upgrades: Year Modification/Upgrade 2012 Installation of quadruple extrusion line no. 02 for individual treads 2012 Foundation for quadruple extruder no. 02 2012 Induction heating insert + die on quad. #02 2013 Expansion of extrusion tooling for profile/SW production 2014 2 compact asynchronous motors by Siemens 2017 Extruder screw 150 base quad 2 2019 Advanced closed-loop upgrade 2021 Advanced closed-loop upgrade 2022 New 200 mm screw for Troester extruder Control system: Modern control and visualization units (control panels, operator panels) Technical data: • Extruder screws up to 200 mm (2022) • Base screw 150 mm (2017) • Siemens asynchronous motors (2014) Ltedpfx Aajx Ithds Eja Maintenance/Condition: Regularly modernized and upgraded 2012–2022 Accessories / Options: Conveyor systems, heating and cooling units, monitoring and measuring stations, winding devices

Condition: used, functionality: fully functional, machine/vehicle number: 3081454316, This is a vacuum packaging machine from the manufacturer Komet, model PlusVac 20, tabletop version. This vacuum unit is in exceptionally well-maintained condition. The machine underwent a comprehensive inspection in our in-house workshop (motor flushing and new pump oil), and the following parts were replaced: counter pressure bar of the sealing beam, air/oil separator element, lid gasket, lift cylinder, the sealing beam was overhauled, sealing wires and Teflon tape were renewed. The device is fully functional. You will receive an invoice with VAT shown separately. Condition: used, inspected, fully functional This unit is made of stainless steel—robust and reliable. It features a plexiglass lid, electronic controls, and a vacuum stop button. It has a double-wire sealing bar with a seal length of 405 mm. The maximum bag size is approximately 400 x 500 mm, and the chamber size is approximately 430 x 505 x 175 mm. Technical data: W x D x H: approx. 485 x 615 x 400 mm Electrical connection: V: 400 / kW: 1.078 / A: 3.487 / Hz: 50 Weight: approx. 62 kg Machine number: 3081454316 Year of manufacture: Chamber size (W x L x H / mm): 430 x 505 x 175 Controls: Standard Comfort Optional: Perfect Seal length (mm): 1 x 405 (2 x 405) Sealing bar length (mm): 420 Double seal seam Distance x (y) (mm): 455 (400) Sealing bar arrangement: Standard front, optional rear Pump (cbm/h): 21 Power supply: 400V / 3Ph+N+PE / 50Hz Power rating (kW): 1.1 Max. bag size (mm): 400 x 500 Insert plates: 2 External dimensions (lid closed / W x D x H mm): 480 x 655 x 385 External dimensions (lid open / W x D x H mm): 480 x 655 x 920 Our used equipment service for you: - 6-month warranty on all electrical components - High-quality branded equipment at fair prices - Professional overhaul, inspection and expert cleaning - Tested & fully functional – or your money back - Flexible shipping or self-collection options - Competent advice – before and after your purchase Ltsdpfx Aaoxpxbpe Eea - Provision of operating manuals, wiring diagrams & spare parts - Safety inspection according to DGUV V3 Shipping: Delivery or self-collection by arrangement Worldwide shipping available on request Shipping to islands or mountain stations only by arrangement Do you have any questions, need advice, or would like to view an item on-site? You can reach us by phone during our business hours: Monday–Friday, 09:00–13:00 and 14:00–17:00. Sales are made exclusively in accordance with our general terms and conditions (GTC).

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm Ltsdpfx Aasxwp Ebj Eja spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: - Dowel insertion unit for simultaneous gluing and dowel driving - Dowel supply via maintenance-free vibratory feeders - Fully automatic maintenance-free electronic control with selector switch FLUSH/GLUE/GLUE & DRIVE - Self-contained glue system - 1 stainless steel container, 5 l for glue, and 1 stainless steel container, 5 l for water - Lightweight, easy-to-handle, and recoil-free gun for 8 mm dowels - Capacity: 45 dowels per minute - Electrical connection: 220 V, 1 Ph, 50 Hz - Compressed air connection: 6 bar - Dimensions: 650 x 650 x 1100 mm - Weight: 110 kg Availability: short-term Ledpfx Aew Rhlhja Esta Location: Flörsheim

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 6671C/6975C/6822C/6989D/6815C, warranty duration: 6 months, year of last overhaul: 2024, Müller online channel for connection to an inserting machine - collect, fold A4 single sheets - Condition: completely overhauled with guarantee (6 months) Consisting of: - 1 x 6798 Autoloader (S/N: 64580) - 1 x 6686D-30K Feeder single sheet vacuum (P/N: 67159) - 1 x 6995 transfer unit incl. 6815 reading unit with large reading area (P/N: 69016) Ljdpfxsvdrx Is Aa Eeta - 1 x 6671C Collecting tray straight ahead 11"-12" (P/N: 69695) - 1 x 6975C Distance module for RU100 (P/N: 69215) - 1 x 6822C Double folding machine upwards (P/N: 69755) - 1 x 6989D Transfer unit (P/N: 69086) - 1 x 6815C STOP function for transfer unit with blower (P/N: 69208) +++Refurbished appliance with 6 months warranty according to our enclosed warranty conditions +++ +++Installment purchase and rental possible on request+++

Condition: good (used), Hand lever shears, long knife sheet metal and round steel shears, lever shears -Manufacturer: Mubea, tin and round steel shears type 3S / 6 R -Blade insert length: 200 mm -Steel sheet: up to 6 mm -Flat/band iron: up to 70x7 mm -Round steel: up to 13 mm -Cutting capacity: see photo nameplate Ltedjiaqmujpfx Aa Eoa -hold-down: -Total dimensions: 385/160/H1500 mm -Transport dimension: 1160/160/H400 mm -Weight: 24 kg

Condition: used, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 90 mm Material thickness: 0,8 - 5,0 mm Feeding speed: 3 - 30 m / min Standard configuration Extended machine accessories Ltsdpovg Iqxefx Aa Eoa Insertion aidLoop bridge

Condition: used, mileage: 465,233 km, power: 375 kW (509.86 HP), first registration: 05/2019, fuel type: diesel, number of seats: 87, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, +++Voltage converter+++ +++USB port on all seats+++ +++Original KM+++ Engine: Mercedes-Benz AD Blue Emission class: Euro 6 Gearbox: Automatic Seats: 85+1+1 sleeping seats with lap belts _____ Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer * Xenon light * Brake assistant * Lane departure warning * Rear view camera * Multifunction steering wheel Passenger compartment * Auxiliary heating * Wood floor look * Automatic climate control * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lamps * Double glazing * Footrests * Kitchen * Refrigerator + additional * Coffee machine * Central toilet * Leather head inserts * Tour guide microphone * Driver microphone Exterior * Trailer hitch * Lifting/lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Ski case eyelets * Central locking * Roof hatches Audio [&] communication * Navigation system * Radio, CD Lsdpfxsx Nla Is Aa Eota * Video, DVD * USB port Other * Vehicle dimensions: length 14.00m, width 2.55m, height 4.00m * Hubcaps * Twin tires * Tires: front approx. 50%, rear approx. 50%, rear approx. 10% Our internal vehicle number: 11294 Errors excepted. Images and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- Lodpfjtr U Hljx Aa Ejta For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Ledpfx Aajx A Ur Rj Eota Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: new, maximum load weight: 98,290 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment features. Full equipment details available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For tractor units: 6x4 or 8x4 2-axle front undercarriage: * Bolt-eye coupling front and rear. Length approx. 2,970 mm * Undercarriage width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle extendable loading platform with bolt-eye coupling at the front and rear bevel approx. 500 mm x 8°, length approx. 11,000 mm * Technically extendable by approx. 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the center beam (LC 10,000 daN) Pendulum axle 2-axle front undercarriage: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) Lsdpfxjxn E I Ho Aa Esta * Hydraulic axle compensation Pendulum axle 6-axle loading platform: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24 x brand at our discretion (M+S) 245/70 R17.5 load index 143/141L (146/146F) Painting: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Options included: * Truck hydraulic connection with volume regulator (20 l/min), incl. support gantry for supply lines, tractor unit tank must have a minimum capacity of 80 L * with MAX Trailer couplings, alternatively couplings to be provided ex works by the customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall on the gooseneck, approx. 400 mm high, anodized finish * Socket for steering operation at the gooseneck via cable remote control with pushbuttons including single-track control of the axles (without installation in the tractor unit) * Control lever on the gooseneck protected by a foldable cover * Control lighting at the gooseneck with on/off switch * BEKA-MAX central lubrication system for one gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed trailer with screw couplings * BEKA-MAX central lubrication for the 2-axle undercarriage with standard grease NLGI-2 * Stake pocket rails mounted crosswise in the loading platform floor for plug-in stakes approx. 100 x 50 mm * Surface of undercarriage coated with integrated sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Loading platform surfa

Condition: used, Hand lever shears, long blade sheet and round steel shears, lever shears, sheet metal shears, profile steel shears -Handover: in current condition as viewed -Hand lever: missing Ljdpev Eakbefx Aa Ejta -Manufacturer: VEB Pels, lever shears, profile steel shears type HS 7 -Cutting insert length: 250 mm -Angle profile: see photos -Dimensions: 580/170/H600 mm -Weight: 76 kg

Condition: ready for operation (used), Baldor BSM 3R-2-4/20-B14 servo motor . 16651 SN:BDDUG8121 , plastic insert of the connection socket slightly damaged see photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Ledji D Ez Nepfx Aa Esta

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Software: metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Ljdpfx Aaed Ambte Esta Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load Ltjdpfx Aaog Dvdcs Esa - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Measured at the operator's workplace Ltjdpfsq Atyzjx Aa Eoa Including the two roller conveyors shown.

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Ltsdpfxsx Hgkve Aa Esa Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm Ljdpfopwnf Njx Aa Esta -Dimensions: 1120/405/1310 mm -Weight: 312 kg

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: E11MF06112081825, This is a combi-steamer from the premium manufacturer Rational, model CM 101, electric version. The combi-steamer accommodates 10 x 1/1 GN trays and features five operating modes. The unit has been overhauled in our in-house workshop and is fully functional. The base stand shown in the pictures is not included in the offer but can be purchased as an optional extra. You will receive an invoice with VAT shown separately. Our used equipment service for you: - 3-month warranty on all electrical parts - High-quality branded appliances at fair prices - Professional overhaul/inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or self-collection options - Competent advice – before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - DGUV V3 safety inspection carried out Operating modes: - Hot air, 30°C to 300°C - Combination of steam and hot air, 30°C to 300°C - Vario-steaming, 30°C to 99°C - Finishing - Steaming at 100°C Technical data: - Dimensions (W x D x H): approx. 847 x 776 x 782 mm - Power supply: V: 400 / kW: 19 / Hz: 50 - Weight: approx. 130 kg - Serial number: E11MF06112081825 - Year of manufacture: 2006 Condition: used, overhauled, fully functional Further information: - Core temperature probe from 30°C to 99°C - Hand shower with automatic recoil - Quick chamber cooling via Cool Down function - Digital temperature display - Adjustable temperature in °C or °F Ljdpfx Aasx E T Uro Ejta - Longitudinal tray insertion for 1/1, 1/2, 1/3, 2/3, 2/8 GN containers - Shatterproof halogen cooking chamber lighting with Ceran glass - Automatic fat separation ensures clean cooking chamber air - Semi-automatic cleaning program - Digital timer, 0–24 hours with continuous mode Shipping: - Delivery or collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement If you have questions, require advice, or wish to inspect the item on site, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our General Terms and Conditions (GTC).

Condition: new, Year of construction: 2025, NEW MACHINE Polar N78 PLUS 2 Resopal air tables 75 x 75 cm, including support corners left/right 2 HSS knives Onboard tools 2.Cover plate 40 mm (cutting width 50 mm) including control Ledexc Ughepfx Aa Eeta documentation 6-month Polar warranty on replacement parts (excluding labor costs), valid from the date of installation, provided that installation and commissioning are carried out by Polar-trained specialists. Available at short notice Technical specifications Cutting width 78 cm / 30.70" Insertion height 12 cm / 4.72" Insertion depth 78 cm / 30.70" Maximum installation height (without cover plate) 12 cm Table height 90 cm Electrical power (main drive) 3.45 kW / 4.75 H.P. Net weight 1350 kg / 2970 lbs

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max Ljdpfegu Nmhox Aa Eota - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool Ledpfx Aeb A Rg Soa Eota -different sizes -Weight including pallet: 346 kg

Condition: new, Year of construction: 2025, NEW MACHINE Equipment: 2 x nickel-plated air table 1000 x 1000 2 x HSS knives OPTIKNIFE knife changing device Tool kit 18.5" touch color display 6-month Polar warranty on replacement parts (excluding labor costs), valid from the date of installation, provided that installation and commissioning are carried out by Polar-trained specialists. Technica Data: Cutting width 1,370 mm Insertion depth 1,450 mm Max. insertion height 165 mm Safety pressing pressure 30 daN Press pressure, min 150 daN Press pressure, max 5,500 daN Ltodpfsxazbtsx Aa Eea Saddle speed return (0 - ...) 300 mm/sec Blade speed 45 cycles/min Residual cut, automatic, without cover plate 25 mm Residual cut, automatic, with cover plate

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears, sheet metal shears, profile steel shears, hand lever shears -Manufacturer: VEB, Hand lever scissors type ScDH 5 -Cutting insert length: 200 mm -Cutting capacity: 5/7 mm -Lift-down device: infinitely adjustable Ltedpfxox Ehlpe Aa Eoa -Dimensions: 470/120/H1270 mm -Weight: 28.1 kg