Used Inserter for sale (1,871)

Condition: new, Year of construction: 2025, Air table Resopal Left 100 x 100 cm Right 100 x 100 cm Air corners Wide cover plate (standard), narrow cover plate (40 mm) incl. control Technical data: Cutting width: 1,150 mm Insertion depth: 1,150 mm Maximum insertion height: 165 mm Safety pressure: 30 daN Pressure (min): 150 daN Pressure (max): 4,500 daN Saddle speed (return): up to 300 mm/s Knife speed: 45 cycles/min Residual cut (automatic, without cover plate): 25 mm Ltedpfx Ajw Dp N Nea Esa Residual cut (automatic, with cover plate): 95 mm Display: 18.5" capacitive touchscreen Automatic programming: graphical, with intuitive user interface Positioning accuracy: 1/100 mm thanks to DPS system Knife change: fast and precise with OptiKnife system 6-month Polar warranty on replacement parts (excluding labor costs), valid from the date of installation, provided that installation and commissioning are carried out by Polar-trained specialists. Available at short notice

Condition: used, Year of construction: 2008, Manufacturer: Kolbus / Cermi • Model: XCR 650 • Machine Type: Front-Cut / Front Cutting Unit for Flap and Brochure Production • Application Area: Print Finishing / Book and Brochure Manufacturing Ltjdpfx Aex Hxq Iea Esa • Function: – Gathering channel with feed and alignment of brochures – Opening of inserted flaps – Front-Cut: Precise front cut for processing flap brochures – Automatic feeding and stacking of finished products • Fields of Application: – Processing of flap brochures and similar print products – Inline integration into finishing or binding lines – Can also be used as a stand-alone machine • Format Range (typical): – Max. trimmed size approx. 480 × 350 × 50 mm – Min. trimmed size approx. 125 × 100 × 3 mm – Max. untrimmed size approx. 480 × 375 × 50 mm – Min. untrimmed size approx. 125 × 105 × 3 mm • Performance: – Mechanical output depending on settings up to approx. 6,000 cycles/h (single cut) – Throughput mode up to approx. 8,000 cycles/h possible :contentReference[oaicite:1]{index=1} • Special Features: – Precise front cut for demanding brochure formats – Suitable for inline production lines – Robust, industrial-grade design • Typical Industries: Print finishing, bookbinding, printing houses

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Ledpfx Aaew Sdr Hj Ejta Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: used, This listing is for a Fisons Whirlimixer Cyclone Vortex Mixer For rapid and efficient mixing, the Whirlimixer® is far superior to hand shaking. The mixer creates a vortex in the tube which gives the highly effective mixing action. Contamination from stirring rods and stoppers is eliminated and different samples may be subjected to the same degree of mixing, thus improving repeatability of results. Fitted with an automatic press-start operation, providing instant action the moment the tube is pressed into the rubber cup. This feature is particularly useful where repetitive mixing is undertaken. Offers variable speed control, with the advantage of controlled mixing over a wide speed range. This allows for very slow, gentle mixing which is necessary in many applications, articularly where damage to cell structure must be avoided. The unit may be set for continuous running at the chosen speed or on demand by inserting the tube into the cup. The skirted rubber cup helps prevent liquid entering the mixer's casing. Accepts vessels up to 25mm diameter. Excellent stability is achieved through a combination of weight and non-slip feet. Electrical supply 230V, 50Hz Dimensions (w x d x h), mm 160 x 160 x 145 Lsdpfx Aasxzh Ddj Ejta

Condition: used, Swivel stacking containers can be inserted into each other when empty. Ltjdpfxeqqhvlj Aa Eja This can save up to 70% space. These containers can be stacked on top of each other - even without a lid - by turning them. When they are turned 180 degrees again, they can be nested. Manufacturer: unknown, could be Schoeller Allibert Type: unknown Year of manufacture: unknown, probably 2005 Dimensions: 59.5 cm L x 40 cm W x 32 cm H The following information is subject to change: Outside 600 x 400 x 300 Inside. 460 x 340 x 270 Stack height 285 Nesting ratio 72% With company imprint Mostly with document pocket approx. 60 pieces per pallet Weight: approx. 2kg / box Volume: approx. 50L Boxes gray: with ribbed bottom Boxes blue: with smooth bottom The blue crates often have an inlaid plywood bottom (the customer inserted this because the crates fell down during empty runs in the AKL because they were too light). However, we cannot sort the crates according to these crates. Available: immediately Condition: good, used, most of the crates are in a much better condition than in the photos! Location: D- NRW

Condition: used, Year of construction: 1990, Design: tiltable Swivel angle forward: 45 degrees Swivel angle backward: -5 degrees Table length: 2400 mm Table width: 1240 mm Extendable frame support: Yes Number of spindle speeds: 4 Spindle speeds: 3000/4500/6000/9000 rpm Speed selection: pole-changing motor Speed display: LED Spindle taper: MK 5 Spindle clamping length: 150 mm Cutter arbor diameter: 30 mm Control panel position: top Spindle height adjustment: electric Spindle tilt adjustment: electric Spindle lock: yes Spindle brake: electric Extraction port diameter (fence): 125 mm Extraction port diameter (machine): 100 mm Spindle rotation direction: left/right Electrical axes: spindle height & tilting & fence adjustment Table opening closure: insert segment Fence jaws: Integral/Aigner Fence jaw dimensions: 650 / 500 mm Fence adjustment: manual Fence digital display: yes Fence jaw setting: manual Power feed unit: yes Feed rollers: 4 Feed adjustment: fixed speeds Ltjdpex It Azsfx Aa Eea Working/table height: 850 mm Dimensions: 3000 x 1240 x 1900 mm Extraction port diameter: 1 x 125 mm, 1 x 100 mm Location: Nattheim

Condition: used, mileage: 1,054,617 km, power: 300 kW (407.89 HP), first registration: 06/2013, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro5, color: silver, brakes: retarder, Equipment: ABS, air conditioning, parking heater, +++Wheelchair lift+++ Ltjdpfxsrmlu Ae Aa Eoa +++3-point belts on every seat+++ Mileage according to speedometer Engine: Mercedes-Benz Emission class: Euro 5 Gearbox: Automatic Seats: 57+2+1 sleeper seats with 3-point seat belts _____ Safety and security * Retarder * Cruise control * ABS, ASR, EBS * Fog lights * Reversing camera Passenger compartment * Auxiliary heating * Wood floor look * Air conditioning * Curtains * Luggage racks * Jet ventilation * Reading lamps * Double glazing * Head leather inserts * Pushchair space * Wheelchair space * Wheelchair ramp * Request to stop * Interior camera Exterior * Matrix brand: Mobitec * Double-width door * Lifting / lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Roof hatches, fans, roof ventilator Audio & communication * Radio / CD Miscellaneous * Vehicle dimensions: Length 14.92 m, width 2.55 m, height 3.00 m * Twin tires * Hubcaps * Tires: VA 60%, MA 60%, HA 20% * Our internal vehicle number: 10175 Errors excepted. Pictures and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2015 servo envelope inserting system available. 12 station base system!!!!! More pictures will follow soon. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder Lodpoxyfmgefx Aa Esta - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: used, Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Lodpewzmu Rjfx Aa Eota Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: used, empty load weight: 5,300 kg, maximum load weight: 27,700 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 03/2000, loading space length: 7,300 mm, loading space width: 2,300 mm, loading space height: 1,450 mm, loading space volume: 24 m³, total length: 2,550 mm, total width: 3,200 mm, suspension: air, tire size: 385 / 65 R 22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2-axle, SAF axles, air suspension, ABS (anti-lock braking system), folding U-guard, chute Body: Aluminum round body 24cm³ with inserted steel floor, empty weight: 5,300 kg SAF axles, disc brakes, steel floor inserted on aluminum, ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lsdpfx Aevhhrlea Ejta - .

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Ltjdpfedyah Ssx Aa Esa Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: used, This listing is for a Techne Dri-block DB3 Heat Block . The unit is in full working condition and is ready for immediate release. The Techne Dri-Block Heater DB-3 is a highly efficient laboratory-grade heating device designed to offer precise temperature control for a variety of applications. Its robust features make it ideal for researchers and laboratory personnel seeking reliable heating solutions. Key Features: Temperature Range: The Dri-Block Heater DB-3 operates within a range from ambient temperature to 100°C (32°F to 212°F), accommodating a wide variety of heating needs. Fast Heat-Up Rate: The device can heat from 30°C to 100°C in approximately 15 minutes, reducing waiting time and increasing efficiency in laboratory workflows. Temperature Stability: It boasts impressive stability specifications, with a temperature accuracy of ±0.1°C at 40°C and ±0.15°C at 100°C. This precision is critical for experiments requiring exact temperature conditions. Temperature Setting: The user-friendly interface consists of three push-button controls paired with a 4-digit LED display, allowing users to set temperatures with a 0.1°C resolution for fine-tuning. Max Temperature Variation: Designed for uniform heating, the maximum temperature variation is limited to 0.2°C between blocks at 40°C, ensuring consistent results across different samples. Number of Blocks: The Dri-Block Heater can accommodate up to three aluminium alloy insert blocks, enabling simultaneous heating of multiple samples or different types of samples. Overall Size: The compact dimensions of the DB-3 are 279 x 260 x 105 mm (L x W x H), making it suitable for space-constrained laboratory environments while still providing ample heating capacity. Ledoxxz N Ispfx Aa Ejta Applications: The Techne Dri-Block Heater DB-3 is versatile and can be used for a range of laboratory and research applications, including: Incubation: Ideal for incubating biological samples under controlled temperatures. Boiling: Suitable for processes requiring boiling solutions efficiently. Inactivation: Useful for inactivating enzymes or pathogens in samples. Wet Ashing: A useful tool in sample preparation for elemental analysis. Sample Concentration: Facilitates concentrating samples by gentle heating. Enzyme Analysis: Maintains specific temperature conditions for enzyme studies. Nucleic Acid Hybridizations: Supports temperature-controlled hybridization necessary for nucleic acid experiments. Key Benefits: Precise Temperature Control: The high degree of control and stability ensures reliable results. Fast Heat-Up Rate: Saves time in laboratory procedures, enhancing productivity. High Temperature Stability: Reduces variability in experimental conditions, leading to more accurate outcomes. Lightweight and Compact Design: Fits conveniently in various lab settings, preserving valuable workspace. Accepts Multiple Insert Blocks: Increases versatility by allowing customization based on specific protocols or sample types.

Condition: used, mileage: 232,422 km, power: 375 kW (509.86 HP), first registration: 06/2014, fuel type: diesel, number of seats: 85, gearing type: automatic, emission class: euro6, color: red, Equipment: air conditioning, bathroom, navigation system, onboard kitchen, parking heater, Sleeping seats with lap belts possible, currently 81+1+1 sleeping seats with lap belts installed+++ +++Original 232,000 km+++ +++Panoramic roof+++ Engine: Paccar Emission standard: EURO 6 Total seats: 85 Seats: 81+1+1 sleeping seats with lap belts currently installed Transmission: Automatic Original mileage Safety Retarder Cruise control Adaptive cruise control ABS, ASR, ESP, EBS Fog lights Immobiliser LED lighting Brake assist Lane departure warning system Reversing camera Multifunction steering wheel Passenger compartment Auxiliary heating Wood-look flooring Air conditioning Tables Curtains Luggage racks Luggage nets Adjustable air vents Reading lamps Double glazing Footrests Kitchen Refrigerator Coffee machine Central WC Headrests Head covers Leather headrest inserts Tour guide microphone Ltedpsx Inyzsfx Aa Eja Driver microphone Audio, Communication, Electronics Navigation system Radio CD USB port at every seat Video DVD Wi-Fi Power sockets Fire detection system Inverter Exterior Tow hitch Lift/lowering system Power steering Digital tachograph card Sun visor Sleeper cab Electrically adjustable exterior mirrors Ski box hooks Central locking Roof hatches Panoramic roof Other German vehicle registration document Twin tires Vehicle length: 13.15 m Vehicle width: 2.55 m Vehicle height: 4.00 m Alloy wheels Front axle tires: approx. 70% Center axle tires: approx. 70% Rear axle tires: approx. 70% Our internal vehicle number: 11486 Errors excepted. Images and text may differ from the actual vehicle. Always over 300 vehicles in stock.

Year of construction: 2022, condition: new, For sale is a hammer mill for the production of powdered goods in the spice / herb / food industry! Structure: 1 piece hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the rear wall 2 pieces flushing ports into the rotating part of the mill Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord Inside the housing a sieve basket with crusher, from the outside the sieve can fix Bottom centered an outlet with appropriate connection flanges Motor 400/680 volts; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. sieve according to your choice 3 pcs. The rotor is also in V2A design, (beater with 96 platelets) Rotor can be turned 180°, in addition, the beater platelets can be turned 1 time. For this purpose, we recommend balancing after turning. 1 piece feeding screw for hammer mill with gear motor with 1,2 kW screw equipped with two cleaning balls at the hinged lid lid is equipped with lid switch and tumbler insertion hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for infinitely variable speed control speed display beater 3 PTC thermistor sensors as protection against overheating of the motor. Sensor for vibration protection Integration of cover switches Switch cabinet in stainless steel Emergency stop, main switch 1 piece Cooling or heating jacket on the rear wall of the mill housing Welded seams pickled and glass beads blasted on the outside. Steel parts, such as motor and motor console primed and painted according to RAL 1013. Attention: It must be ensured that no metal parts enter the mill! Total price of the plant described above price 145.000 € superstructure: 1 piece Hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the back wall 2 pieces of flushing connections into the rotating part of the mill. Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. Ledpfx Aaopz H D Is Ejta In the lid an O-ring groove with silicone round cord In the inside of the housing a sieve basket with crusher, from the outside the sieve can be fixed At the bottom in the middle an outlet with a corresponding connection flange. Motor 400/680 Volt; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. screens of your choice 3 pieces rotors The rotor is also in V2A design, (beater with 96 plates) rotor can be rotated by 180 the beater plates can be turned 1 time. be turned. For this purpose, we recommend balancing after turning. 1 piece Feeding screw for hammer mill with gear motor with 1,2 kW Screw equipped with two cleaning balls on hinged lid lid is equipped with lid switch and tumbler feeding hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for stepless speed control speed indicator beater

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg Ljdowki Apjpfx Aa Esta

Condition: used, machine/vehicle number: BT1813052302, Hommel Rotormat 1000 bread shredder ? Product description Ltjdpfx Aouk Ebloa Eoa ? Manufacturer: Hommel Maschinen- und Apparatebau ? Type: Rotormat 1000 Universal shredder, for grinding fresh or dry bread, breadcrumbs, fruits, nuts, Kä shredder is with 3 kW machine is offered 2 sieve inserts further sieve inserts can be purchased separately. -crushing of bread -380 volt / 50 Hz -3 kW motor -stainless steel casing -146 / 65 / 90 cm (H/W/D) Dimensions (H x W x D) See pictures for details.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Ltsdpfx Aaexwaz Ho Eja

Condition: used, This listing is for a Grant UBR2 Heat Block. The unit is in full working condition and is ready for immediate release. The Grant UBR2 Heat Block is a reliable and efficient heating solution designed for various laboratory applications, including DNA extraction, enzyme reactions, and sample incubation. With precise temperature control and a robust design, the UBR2 ensures consistent heating for optimal experimental results. Key Features: Ltjdpfjxxz Hysx Aa Eja Temperature Range: Operates from ambient to 100°C, providing versatility for a wide range of applications. User-Friendly Controls: Equipped with a large LED display and intuitive controls for easy temperature setting and monitoring. Rapid Heating: Quickly reaches set temperatures, minimizing wait times and enhancing productivity in the lab. Uniform Heat Distribution: Designed with a high-quality aluminum block that ensures even heat distribution across all wells, promoting consistent sample heating. Versatile Block Compatibility: Accepts various block inserts (available separately) to accommodate different tube sizes and formats, making it adaptable for different experiments. Safety Features: Incorporates over-temperature protection and a safety cut-off feature to prevent overheating, ensuring safe operation. Applications: DNA & RNA Preparation: Ideal for use in molecular biology applications, including DNA extraction and purification processes. Enzyme Reactions: Perfect for incubating samples at controlled temperatures for enzyme assays and reactions, ensuring optimal conditions for activity. Sample Incubation: Suitable for incubating various samples, from cell cultures to biochemical assays, requiring consistent and reliable heating. Thermal Cycling: Can be used for specific thermal cycling applications where controlled heating is essential for reaction efficiency.

Condition: used, mileage: 1,046,937 km, power: 315 kW (428.28 HP), first registration: 01/2022, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, +++Lift+++ +++54 sleeper seats with lap belts currently installed+++ +++1 double bench in the luggage compartment+++ +++Seats newly reupholstered+++ General Engine: Mercedes-Benz AdBlue Emission standard: EURO6 Total seats: 54 Seating configuration: 49+2+1 sleeper seats with lap belts Transmission: Automatic Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Immobilizer * Xenon headlights * LED lighting * Brake assist * Lane departure warning system * Reversing camera * Multifunction steering wheel Passenger Compartment * Auxiliary heating * Wood-effect flooring Ljdex Inyhepfx Aa Ejta * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Individual air vents * Reading lights * Double glazing * Footrests * Refrigerator * Mid-mounted toilet * Headrests with leather inserts * Tour guide microphone * Driver microphone Audio, Communication, Electronics * Navigation system * Radio, CD * USB port at each bench * USB port at multimedia system * Video, DVD * Power sockets * Power inverter Exterior * Tow hitch * Matrix/Hanover destination display system * Lift/lowering system * Power steering * Tachograph card * Sun visor * Prepared for sleeper cabin * Electrically adjustable exterior mirrors * Ski box mountings * Central locking * Roof hatches * Roof fans * Roof ventilators Other * German vehicle registration * Twin tires * Vehicle length: 13.11 m * Vehicle width: 2.55 m * Vehicle height: 3.68 m * Hubcaps * Front axle tires approx. 40% * Rear axle tires approx. 70% Our internal vehicle number: 12002 Errors excepted. Images and descriptions may differ from the actual vehicle. Always over 300 vehicles available.

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, center height: 170 mm, total length: 1,650 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, overall weight: 755 kg, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, New machine immediately available from our warehouse in Stuttgart. ( subject to prior sale) Whether prototype construction, maintenance or very important the training - the conventional and cycle-controlled machines of EMCO create here the balancing act and offer highest accuracy on smallest space and flexibility up to the detail. From possible accessories to the organization of the insertion, we are at your side with advice. Highlights of the EMCOMAT 17D - Main spindle DIN55029 - Tailstock (off-center adjustable) - Single steel holder (clamping claw) - Belt drive for feed gear - Chuck protection with electric limit switch - Optional equipment such as coolant device, sliding chip guard doors, etc. Working range: - Travel in X/Y/Z: 220 / - / 710 mm - center distance: 700 mm - Center height: 170 mm Main spindle: - Max. Speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029) - Max. Drive power: 5.3 kW Tailstock: - Internal cone: MK3 Ltodpfodq Rb Asx Aa Eja - quill stroke: 120 mm - inner taper of the quill: 50 mm The machine can be inspected in Stuttgart.

Condition: excellent (used), Year of construction: 1999, grinding length: 1,000 mm, Internal / External spindel Collet device Schaublin with inserts Ltjdpoxy I Tvjfx Aa Eea Steady rest 5 - 80 mm Steady rest 3 - 120 mm Coolant system Filtration system Speeds head 1500 / 1700 / 2200  Centre height: 175mm Grinding Ø: 350mm Grinding length: 1000mm Grinding stone dimensions:400 x 50 x 127mm Grinding stone speeds: 1500 / 1700 / 2200Rpm Table inclasement: 9° Tailstock: 4Mk Cooling system: Yes Filtration: Yes Length: 2860mm Width: 1680mm Height: 1670mm Weight: 2500kg

Condition: ready for operation (used), Year of construction: 1977, Available immediately from insolvency: Stanko Lathes (longitudinal and transverse) Ltsdpex Ich Tjfx Aa Esa Type 16 K 20 Year of manufacture: 1977 Retrofit and digital readout in 2012 Centre height: 200 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 55 mm Spindle speeds: 12.5 – 1600 rpm Drive: 7.5 kW Chuck Tailstock Coolant system Multifix tool holder with inserts Digital readout Steady rest (Lynette) Weight: 2700 kg Priced at EUR 2,500 plus VAT ex works

Condition: new, TC 205 x 1000 Center height: 205 mm Swing diameter over bed: 410 mm center width: 1000 mm bed width: 260 mm spindle nose: DIN 55029 (Camlock) 9, size 6 traverse path cross slide: 220 mm travel top slide: 125 mm spindle bore: 52,5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Stepless Mechanical preload stages: 2 motor power: 3,75 kW coolant pump: 0,13 kW longitudinal feeds Z: 0,05 - 1,7 mm/rev face feeds X: 0,025 - 0,85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametrical threads: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Internal taper quill: MK 4 quill stroke: 150 mm dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control ( 2 preload stages ) - Fine balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge Scope of delivery: - 3-axis digital display (resolution 0.005 mm) - 3-jaw lathe chuck - Quick-change tool holder with four cassettes - High splash guard rear wall and integrated LED tray light - Chip tray can be pulled out to the front - Slipping clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop Ltodpfx Ajir If Dsa Eja - Machine shoes (1 set of 6) - Two emergency stop buttons - Foot pedal with double braking device ( mechanical and electrical ) - Limit switch secured chuck protection, rotating steel holder protection and cover of the leading and traction spindle according to the European safety standards CE - Coolant device - 2 fixed center punches - Reducing sleeve for main spindle - Operating tool - Operating tool in tool box - Operating manual with spare parts list

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 077-Z2A-2147, This is a manual packaging machine E 15 Basic from the premium manufacturer Webomatic, built in 2019. These small vacuum table-top machines offer high packaging performance. If you need to pack large products at high capacity but have limited space for a vacuum packaging machine, the compact yet powerful E 15 Basic or C 15-HL packaging machines are the perfect choice! You will receive an invoice with VAT shown separately. Our used equipment service for you: • 6-month warranty on all electrical parts • High-quality brand-name equipment at fair prices • Professional refurbishment, inspection & expert cleaning • Tested and fully functional – or your money back • Flexible shipping or collection options • Competent advice – before and after purchase • Provision of operating manuals, connection diagrams & spare parts • Safety check according to DGUV V3 Technical data: MAP (E 15 Basic) Soft-Air (E 15 Basic) Undercarriage Angled insert GreenVAC Machine dimensions: 490 x 610 x 470 mm (W x D x H) Chamber dimensions: 430 x 500 x 180 mm (W x D x H) Weight: net/gross approx. 83 kg / 91 kg Pump: 21 m3/h high-performance pump, built-in Cycle performance: 2-3 cycles/min., depending on product size and desired vacuum Chamber made of high-quality stainless steel Easy operation MAP (C15, optional for E 15 Basic) Ltedpfxsx Drl Dj Aa Esa Soft-Air (C15, optional for E 15 Basic) Serial number: 077-Z2A-2147 Year of manufacture: 2019 Additional information: The vacuum packer for any application. The E 15 Basic and C 15 HL packaging machines are perfectly suited for vacuum packing and packaging in kitchens, at weekly markets, branch operations, or for meat packaging in hunting and game processing. They are also ideal for packaging sterile and sensitive medical products or items from the electronics sector, as well as for packaging banknotes. As the C 15 HL version, the table-top machine is equipped with the sensor-controlled WEBOMATIC C 3000 S computer and comes standard with Soft-Air and MAP gas flushing for gentle gassing and vacuum packaging of delicate products. These functions are also optionally available for the E 15 Basic table-top machine. Food-safe PE chamber inserts for reducing chamber volume are included with the vacuum packer. Shipping: Delivery or collection by arrangement Worldwide shipping available on request Shipping to islands or mountain stations only by arrangement

Condition: ready for operation (used), Year of construction: 1966, Immediately available from location: L & Z Lathe Weiler Ltjdpfjx Icidsx Aa Eja Year of manufacture approx. 1966 Centre height 140 mm Swing diameter 280 mm Over carriage 180 mm Turning length 800 mm Spindle bore 24 mm Spindle speeds up to 1600 rpm Drive power 2 kW Chuck diameter 140 mm Multifix tool holder with inserts Weight 1 ton Priced at EUR 1,500.— plus VAT ex location