Used Carbide Inserts for sale (2,391)

Condition: used, 10 pieces of carbide cutting inserts, HM cutting inserts, indexable inserts WIDIA Cutting insert with chip guide and cylindrical bore Type DNMM 150 612 TK15 Gbedpfxszugqps Aiksw Nominal size: 15 mm Cutting radius: 1.2 mm Rhombus angle: 55° Insert thickness: 6.35 mm Dimensions according to the sketch: D = 12.7 mm L10 = 15.5 mm = edge length of the rhombus S = 6.35 mm = insert thickness R = 1.2 mm = cutting radius D1 = 5.16 mm = cylindrical clamping bore 10 pieces = 2 packaging units, each with 5 inserts There are 160 packaging units available. The price quoted refers to 2 packaging units.

Condition: new, 10 pcs. cutting inserts/blades from Allied Machine & Engineering Wohlhaupter 211021-34 3 Series T-A Diameter 45 mm C1 Carbide AM200 Gbsdpfxjz Hbx Ns Aikow for drilling

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Easily guided unit, runs on two hardened, ground linear guide shafts. Gedpfxe Afznue Aikobw Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Operating manual. Onboard tools. Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: excellent (used), BRANDT KDF 340 edge banding machine - used Manual, self-clamping pressure bridge adjustment, Feed via transport chain, Workpiece support is retractable, Diamond jointing cutter for both forward and reverse rotation, Glue reservoir located underneath, Standby function, Miter saw with 2 HF motors, Miter saw is swiveling, Edge trimming/radius chamfering unit, Milling tools with carbide insert blades, Radius pulling blade, Chip collection box for radius pulling blade, Gbjdpfx Ajz Ea Dzoikjw Air nozzle on the radius pulling blade ----- Technical data ----- Edge thickness, roll material: 0.4-3 mm, Edge thickness, strip material: 0.4-3 mm, Workpiece thickness: 50 mm, Min. workpiece length: 250 mm, Feed speed: 9 m/min., Distance workpiece support: 400 mm, Support plate Ø for edge material: 810 mm, Dimensions jointing cutter: 100x62x30 mm, Dimensions miter saw blade: 100x2.6x32 mm, Cutting blade for roll material up to: 3 mm, Warm-up time: 17 min., Power jointing cutter: 2x2.2 kW, Power miter saw: 2x0.18 kW, Power milling station: 2x0.27 kW, Power chamfering unit: 2x0.09 kW, Dust extraction nozzle Ø jointing cutter unit: 120 mm, Dust extraction nozzle Ø milling unit: 100 mm, Dust extraction nozzle Ø pulling blade unit: 100 mm, Compressed air connection: 6 bar, Overall length: 3,550 mm, Dimensions (L x W x H): 3,550 x 1,250 x 1,450 mm Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), functionality: fully functional, Offer: Like-new turning tool holders VDI40 turning tool holder Tool holders, VDI40 tool holders. The holders have been inspected and are in very good, almost new condition. The outstanding quality of well-known manufacturers confirms the high repeatability and a very long service life. ----- Order number: 435_C1 → In stock: 2 pieces; Price: €56.00/piece Order number: 430_C2 → In stock: 3 pieces; Price: €56.00/piece One tool holder has been ground on the underside (see picture), but this does not affect its functionality. Order number: 432_B4 → In stock: 2 pieces; Price: €56.00/piece Order number: 433_B4 → In stock: 2 pieces; Price: €56.00/piece For orders of 4 pieces or more, the above prices apply, including shipping costs within Germany. ----- B3 with right-hand rotation; B4 with left-hand rotation C1 with right-hand rotation; C2 with left-hand rotation ----- Short, reversed VDI radial tool holder. Tool holder for mounting external turning tools in the normal position, i.e., with carbide inserts facing upwards: C1 with right-hand rotation; C2 with left-hand rotation. Shipping costs: upon request. ----- Dimensions: D = 83 mm d-2 = 83/40 mm (45.52) H = 32.5 mm L1 = 75 Gjdpfoz Hn Rrex Aikjbw L2 = 22 l-4 = ----- More VDI40 holders can be found in our other offers, e.g., VDI40 form E2. For boring tools with cylindrical shanks, with internal and external coolant supply. Surface hardened, blued, and ground.

Condition: excellent (used), functionality: fully functional, Radius and round arch cutter set Field of application: Solid wood, wood panel materials, solid surface materials and much more. Consisting of: 1. Scheer HM 16 hand router Power 1800 W / 18000 rpm 220 V Tool: Carbide insert router 16 mm Cutting length 50 mm Storage case for machine and tools 2nd radius milling device ¼ circle from R 30 - 160 mm 3. radius milling device ¼ circle from R 110 - 360 mm 4. round arc milling device with radius ruler For radii from 300 - 5500 mm For the production of round, stitch and basket arches Gbedpfxouy T Exj Aikjw Machine and device fully functional and cleaned

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, year of manufacture 2003 - Only 160,000 linear meters run, very good condition - - Can also be operated separately without Ligmatech - - Ideal for high-quality furniture production, HPL and matte decors are no problem - Machine completely controlled by PLC, almost everything can be adjusted on the control panel, no defects, well-maintained machine used with expertise. Leuco Z3 jointing cutter installed, 2nd set of cutters available, various indexable inserts available. Board thickness max. approx. 48 mm, edge banding from 0.3-15 mm possible. Chain conveyor renewed approximately 10 years ago. Spray system for release and cleaning agents, controlled by demand. - Jointing fence motor-controlled and programmable. - Jointing cutters 1961, 2 x 2.0 kW - Glue system cartridge 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. - Pressure unit 1903 MOT, pressure of the 1st and other rollers can be adjusted separately. - Miter saws 1918, bevel cuts adjustable. - Flush trimming 1823 - Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable on the control panel) - Profile trimming blade 2 mm 1929 pneumatically controlled. - Corner copying unit 1983 carbide-tipped, with adjustment on the control panel, functional, but needs to be fine-tuned again. - Flat trimming blade 1964 - Oscillating unit controlled by demand. Gbjdpfx Aiez Dxh Neksw Includes all operating manuals, documentation of the process steps digitally and in printed form by Holzher technicians. One set of DIA jointing cutters is included, as well as various indexable inserts for the cutting units. Return conveyor system ZHR 15 Boomerang, year of manufacture 1995. Mounted on the machine with coupling to the pressure bridge. Easily adjustable from the control panel, with rotating device for components. Adjusted to the feed rate, sensors still available from HOMAG. - Information without guarantee, the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase. - Sale only to commercial businesses, machine currently powered and in operation. Price negotiable. Machine available after clarification in December / January 2027. Crane loading or forklift loading also possible from an external warehouse.

Condition: used, Year of construction: 1975, workpiece diameter 125 mm grinding depth 50 mm clamping length 2000 mm total power requirement 0,5 kW weight of the machine ca. 1000 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _____ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm ght of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head adjustable in vertical axis 160 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Total electrical load, approx. 1 kW - 380 V - 50 Hz Weight, approx. 1.000 kg Accessories / Special Features Machine is suitable for workpiece length up to 2.000 mm with a basement extension * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the generation of perfect centre holes. Gbjdpfx Ajvanrcoikew * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering vice with carbide inserts. Manual adjustment of appropriate workpiece diameter with clamping screw. * Dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form and with oscillation of diamond tool. * Pre-centering device for Workpiece adjustment between centers. * Pneumatic Oil Lubrification of grinding spindle by oil-mist. * Manually adjustable Tailstock with handwheel but without motorized drive. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: reconditioned (used), Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication Gbjdpjzlbpzefx Aikow - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: new, Bernardo Horizontal Bandsaw HBS 275 PRO Technical Specifications Cutting capacity, round, 90°: 225 mm Cutting capacity, square, 90°: 200 x 200 mm Cutting capacity, rectangular, 90°: 245 x 150 mm Cutting capacity, round, 45°: 160 mm Cutting capacity, square, 45°: 160 x 160 mm Cutting capacity, round, 60°: 100 mm Cutting capacity, square, 60°: 100 x 100 mm Working height: 910 mm Saw band dimensions: 2480 x 27 x 0.9 mm Cutting speed: 45 / 90 m/min Coolant pump: 100 W Motor output, S1 100%: 1.1 kW Motor input, S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight, approx.: 180 kg Gbsdpfxjfigzzo Aikjw Scope of delivery: • Saw band • Workpiece stop • Base frame • Manometer for band tension • Saw band guide with carbide inserts • Vise with quick-release mechanism • Coolant system • Hydraulic lowering cylinder • Motor circuit breaker • Automatic shut-off at the end of the cut

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Gedpexzq Ncsfx Aiksbw Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: used, cutting diameter 470 mm saw band length 6.060 mm capacity 90 degrees: square 610 x 410 mm capacity 45 degrees: round 475 mm capacity 45 degrees: square 490 x 415 mm capacity 60 degrees: round 330 mm Gedpj Ah Idpsfx Aikobw capacity 60 degrees: square 320 x 410 mm diameter min. 10.0 mm turning speed range: 20 - 100 m/min dimensions of saw-band 6060 x 34 x 1.1 mm height of material-table 810 mm total power requirement 5.5 kW weight 2080 kg range L-W-H 3280 x 1760 x 2010 mm Current new price ~ 55.000 euros Special price upon request Features: - Robust semi-automatic electro-hydraulic band saw - Miter cuts from -60° (left) to +60° (right) - Designed for industrial use - Ideally suited for cutting solid material - Extremely stable and robust construction - Cast-iron pulleys with a diameter of 500 mm - Equipped as standard with infinitely variable band speed adjustment - Microswitches control the highest and lowest positions of the saw arm - Includes a driven cleaning brush for optimal cleaning . and maintenance of the saw blade - Fully hydraulic system controls the machine's operating sequences - Cooling system provided at the saw blade guides - Blade guides equipped with adjustable carbide inserts - Machine drive features a low-maintenance, oil-lubricated worm gear - Powered by a robust three-phase motor - Motor equipped with overload protection - Machine frame consists of a highly solid steel construction - Features a solid, precise dual-column guide system - Linear guides on both columns ensure perfect cutting results - Includes cutting height limitation - Vise clamping jaw equipped with a long-stroke cylinder - Operating manual in German (PDF)

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-260017, The FICEP Tipo G31 sheet metal processing center for the cost-effective processing of steel sheets and flat steel in the steel construction and steel trading industries. The Ficep Tipo G31 LG can drill, center-punch, tap, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting. The CNC-controlled sheet metal processing center is equipped with 2 drilling units, each with 26 kW of drive power. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changing. This system is suitable for sheet metal sizes: sheet width: minimum 200 mm, maximum 3,100 mm; sheet length: minimum 2,500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma power source is available for plasma cutting. In addition, the system features an oxy-fuel cutting unit for thick materials. Gbodpfxeznh R Rs Aiksw The drilling unit, with high torque and a spindle speed of up to 6,000 rpm, is designed for drilling with carbide tools such as solid carbide drills, Kennametal drilling tools, Nenok Multiplex indexable insert tools, as well as for use with HSS coolant-channel drills with diameters ranging from 10 mm to 40 mm. The Ficep Tipo G31 sheet metal processing center is in very good condition and has only a few operating hours.

Condition: used, Year of construction: 2015, Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Clamping force 38 kN Upsetting force (max.) 10 kN Air pressure (min.) 6 bar Air consumption per cycle 52.6 Nl (at 6 bar) Cooling water consumption 4–5 l/min (20–25°C) Machine weight approx. 800 kg Dimensions W/D/H 1214 / 957 / 1982 mm Connection voltage 380–420 Bi-metallic / carbide bandsaws 6×0.40 – 54×1.60 Wood saw blades 6×0.40 – 50×1.10 Stainless steel saw blades 10×0.40 – 40×0.80 Strip blades 6×0.40 – 50×1.00 Steel strip S235JR max. 150 mm² Godpfxez Rkcas Aikebw Stainless steel max. 60 mm² Max. clamping width 50 mm

Condition: like new (used), as-new centers and sleeves, MK5 (sleeves and centers with carbide insert) Gbodpfx Aozv Sd Dsikjw

Condition: new, Bernardo Double-Column Bandsaw MBS 600 DG / 400 V Gsdpfszibc Asx Aiksbw Technical Specifications Cutting capacity, round / square, 90°: 410 mm / 300 x 300 mm Cutting capacity, flat, 90°: 540 x 300 mm Cutting capacity, round / square, 45° (right): 400 mm / 260 x 260 mm Cutting capacity, flat, 45° (right): 400 x 210 mm Cutting capacity, round / square, 45° (left): 340 mm / 260 x 260 mm Cutting capacity, flat, 45° (left): 380 x 170 mm Cutting capacity, round / square, 60° (right): 260 mm / 175 x 175 mm Working height: 866 mm Bandsaw blade dimensions: 4290 x 34 x 1.1 mm Cutting speeds: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 2.2 kW Motor input power S6 40%: 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2340 x 1430 x 1460 mm Weight: approx. 606 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for blade tension • Bandsaw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, Year of construction: 2026, CORMAK PT310ECO Thickness and Surface Planer with Spiral Cutter Block – Precision and Work Efficiency The CORMAK PT310ECO is a modern planer-thicknesser engineered for high finish quality, reliability, and low noise levels. Thanks to its spiral cutter block with 30 replaceable carbide inserts, the machine delivers exceptionally smooth surfaces with significantly reduced vibration and noise. Its stable construction and powerful motor make it a versatile solution for professional woodworking—both in carpentry shops and in artisan workshops. Key Advantages Spiral cutter block – 30 inserts (310 × 25 × 3 mm) provide long tool life, precise planing, and reduced noise levels. Massive cast iron work tables – absorb vibrations and ensure stable material feed. High power output – 2.2 kW motor (S1) / 2.6 kW (S6) ensures consistent performance during demanding operations. Large working area – 310 mm planing width and 180 mm height capacity for various workpieces. Effective chip extraction – Ø100 mm extraction port allows easy connection to dust collection systems. Construction and Technology The PT310ECO is equipped with a spiral cutter block of 75 mm diameter, ensuring smooth operation and significantly longer durability than traditional knives. Each insert can be rotated four times, greatly reducing maintenance and operating costs. The planer-thicknesser features wear-resistant cast iron tables: 1290 × 310 mm (planer) and 540 × 310 mm (thicknesser). The adjustable fence angle between 90° and 45° allows for accurate guiding of materials even at an angle. Precision and Performance Maximum cutting depth: Planing mode: 3 mm Thicknessing mode: 4 mm Cutter block rotation speed: 5,500 rpm The machine’s rigid frame enables surfaces that are ready for gluing, lacquering, or further processing. A reliable thickness planer for both mass production and small batch work. Applications The PT310ECO is the ideal solution for: Professional carpentry and furniture workshops Prototyping labs and training centers Industrial maintenance departments Technical schools and trade colleges Standard Equipment Spiral cutter block with 30 inserts Gbodpfx Aiow Ab Afekow Cast iron work tables Cutter head guard Ø100 mm dust extraction outlet Feed switch and emergency stop switch Optional Equipment Mobile base Dust extractor Technical Specifications Specification Value Planer table dimensions 1290 × 310 mm Thicknessing table dimensions 540 × 310 mm Spiral cutter block diameter 75 mm Cutter block speed 5,500 rpm Cutting inserts 310 × 25 × 2.5 mm Fence tilt angle 90°–45° Chip extraction outlet Ø100 mm Maximum thicknessing height 180 mm Max. cutting depth 3 mm (planing) / 4 mm (thicknessing) Motor power (S1 / S6) 2.2 kW / 2.6 kW Maximum workpiece width 310 mm Weight (gross) 200 kg

Condition: new, Semi-automatic band saw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Belt drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Properly sized flywheels. Heavy-duty belt guides made with sealed guide bearings and adjustable carbide inserts. Belt tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Gjdpfxefibd Te Aikebw Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm. Cutting angle: 60° left, 60° right. Adjustable stop for making cuts of the same size. Brush-type belt cleaning device. Hydraulic power unit motor: 0.37 kW. Electric pump: 0.09 kW for belt cooling. Vise, jaw height: 200 mm. Vise, jaw length: 185 mm. Worktable height: 760 mm. Machine weight: 820 kg.

Condition: like new (used), amount 1 Palette Milling, drilling, and cutting tools for CNC and conventional machine tools. These include: -> Face mills — large milling heads with multiple indexable inserts, ideal for facing large surfaces. -> Cylindrical end mills — cylindrical mills with face and peripheral teeth, often used for grooves and contours. -> Disc cutters — thin, round cutters for cutting or for deep grooves. -> Drills — various twist drills for metalworking. -> Gear hobs — gear-like cutters for producing gear teeth. -> Tool shanks (SK/ISO/BT) — the tapered tool holders on which the cutters are mounted. -> Collet chucks — holders for smaller tools, such as drill bits or end mills. -> End mills — smaller cutters with multiple cutting edges for contouring, pocketing, and 3D machining. -> Indexable-insert cutters — cutters with replaceable carbide inserts. -> Circular saw blades — round saw blades for cutting or slotting. -> Adapters and spacers — for adapting different tool holders. Complete package price Gbjdpfszhcf Nex Aikew

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor, and the special gearbox, complete with a bronze gear, features a hardened and ground worm gear. Appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable tungsten carbide inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned during blade rotation. Equipped with a safety device to prevent accidents on the flywheel cover and the blade, the machine is completed by a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: Gbodpfxsfh R Tye Aikew 1. closes the vice and activates the bandsaw motor 2. lowers the saw frame for cutting 3. the saw frame returns to its starting position 4. stops the bandsaw motor 5. opens the vice Manual cutting option available. Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range: 45° left to 60° right Stop for cuts of the same size: Adjustable Electric pump for bandsaw cooling: 0.06 kW

Condition: new, cutting diameter 410 mm capacity 90 degrees: flat 540 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: flat RE 400 x 210 mm capacity 45 degrees: round RE 400 mm capacity 45 degrees: square RE 260 x 260 mm capacity 45 degrees: flat LI 380 x 170 mm capacity 45 degrees: round LI 340 mm capacity 45 degrees: square LI 260 x 260 mm capacity 60 degrees: round 260 mm capacity 60 degrees: square 175 x 175 mm turning speed range: 20 - 80 m/min saw band length 4290 x 34 x 1.1 mm work height max. 865 mm voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 686 kg range L-W-H 2340 x 1430 x 1550 mm The MBS 600 DGA-V model is a semi-automatic double-miter band saw for miter cuts up to 60°. The infinitely variable cutting speed and the hydraulic vise make for comfortable operation. Thanks to its solid construction, this model guarantees precise cuts when cutting hollow profiles, solid materials, stainless steel, tool steel, etc. This machine is used in metalworking shops, repair shops, mold and tool making, ... Features: - continuously variable cutting speed * for optimal adjustment to the workpiece (20â??80 m/min) - Increased cost-effectiveness thanks to semi-automatic operation - Choice of manual or semi-automatic sawing mode - Adjustable vise; clamping is manual or hydraulic - Swivel range of the saw frame (-45° to 60°) readable via a degree scale - Professional band saw offering good value for money - Smooth, vibration-free operation ensures high cutting accuracy - Optimal power transmission to the drive wheel * via a hardened and ground worm shaft and bronze worm gear - Adjustable hydraulic cylinder for regulating the contact . pressure of the saw frame - Saw blade guidance via a combined roller-and-jaw guidance system * with carbide inserts Gbodpfx Aijz D It Ijksw Semi-automatic operation: - Hydraulic clamping of the vise - Hydraulic lowering of the saw frame - Lifting of the saw frame Scope of delivery - Saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band saw guide with carbide inserts - Hydraulic quick-clamping vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch

Condition: new, cutting diameter 410 mm capacity 90 degrees: flat 540 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: flat RE 400 x 210 mm capacity 45 degrees: round RE 400 mm capacity 45 degrees: square RE 260 x 260 mm capacity 45 degrees: flat LI 380 x 170 mm capacity 45 degrees: round LI 340 mm capacity 45 degrees: square LI 260 x 260 mm capacity 60 degrees: round 260 mm capacity 60 degrees: square 175 x 175 mm turning speed range: 45 + 90 m/min saw band length 4290 x 34 x 1.1 mm work height max. 866 mm Gjdpfx Aiez D Iufjksbw voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 606 kg range L-W-H 2340 x 1430 x 1460 mm The MBS 600 DG is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve. Features: - Band saw guide via a combined roller-and-jaw guide system * with carbide inserts - Swiveling saw frame for double miter cuts * to the left (-45°) and right (60°) - 2 band saw speeds (45 / 90 m/min) for optimal cutting results - Robust construction, ensuring smooth and vibration-free operation - Professional band saw offering excellent value for the price - Optimal power transmission to the drive wheel via a hardened . and ground worm shaft and bronze worm gear - Adjustable hydraulic cylinder for regulating the clamping . pressure of the saw arm - Sturdy gray cast iron vise with workpiece stop * Ideal for batch cutting - For cutting profiles, tubes, and solid materials made of iron . and non-ferrous materials Scope of Delivery - Saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band guide with carbide inserts - Quick-release vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic end-of-stroke shut-off

Condition: new, Year of construction: 2026, CORMAK S200R Manual Metal Band Saw The CORMAK S200R metal band saw is designed for both single-piece and series production. With the ability to perform angled cuts from -45° to +60°, it is an ideal solution for cutting pipes, profiles, and solid materials. The construction based on a massive cast-iron arm and a precise blade guidance system ensures high cutting accuracy and repeatability. The feed is gravity-controlled by a hydraulic cylinder with smooth descent adjustment, providing a controlled and efficient cutting process. Main Advantages of the Machine Solid cast-iron construction increases machine durability and cutting accuracy. Wide angle cutting range from -45° to +60° thanks to the rotating arm design. Blade guides with carbide inserts and bearings ensure straight cutting and extended blade life. Gravity feed controlled by a dual-chamber hydraulic cylinder provides smooth and precise cutting. High level of operator safety thanks to limit switches, micro-switches, and an emergency stop button. Automatic stop after completing the cut and blade break protection function improve safety and reliability. Construction and Technology The machine is built on a rigid steel base equipped with an integrated coolant tank and circulation pump. The saw arm is manufactured from a single cast-iron casting, significantly improving stability and vibration damping during operation. Gbedofy Ttijpfx Aiksw The drive system uses a three-phase motor with two blade speeds (36/70 m/min) selectable from the control panel. The arm inclination of 25° relative to the base extends blade life and improves cutting quality. Precision and Work Efficiency High cutting accuracy is achieved through the cooperation of carbide blade guides and rolling bearings, ensuring precise blade alignment. Maintaining optimal blade tension improves cutting efficiency and reduces the risk of failures. The automatic stop function after completing the cut eliminates operator errors and increases workplace safety. The combination of a rigid structure, precise blade guidance, and controlled hydraulic feed guarantees reliable performance in demanding applications. Applications The CORMAK S200R metal band saw is ideal for: industrial production plants, metalworking and fabrication workshops, steel construction companies, maintenance departments. The machine enables precise cutting of: carbon steel, stainless steel, tool steel, closed profiles, solid metal sections. Standard Equipment Mechanical quick-clamping vice Hydraulic cylinder with smooth descent adjustment Blade cleaning brush Coolant pump with closed circulation system Length stop with measuring scale Optional Equipment Material feeding roller system Technical Specifications Parameter Value Machine type Manual metal band saw Cutting method Gravity feed Blade speed 36 / 70 m/min Cutting angle range -45° to +60° Vice type Manual Saw blade dimensions 27 × 0.9 × 2910 mm Motor power 1.8 kW Vice base height 890 mm Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 500 kg

Condition: new, Semi-automatic band saw for cutting medium and large-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Gjdpjfh R Tuofx Aikjbw Band control with a motor driven by an inverter and a special gearbox with a bronze gear and a hardened and ground worm gear. Appropriately sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide inserts. Band tension is achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Brush band cleaning device Hydraulic power unit motor: 0.37 kW Electric pump: 0.09 kW for band cooling Vise, jaw height: 250 mm Vise, jaw length: 200 mm Work table height: 760 mm Machine weight: 1250 kg / 12260 N

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, actuation type: hydraulic, total height: 1,650 mm, total length: 2,495 mm, total width: 700 mm, overall weight: 780 kg, Equipment: CE marking, documentation/manual, Semi-automatic bandsaw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting precision. Robust bandsaw guides made with sealed guide bearings and adjustable tungsten carbide inserts. Blade tensioning achieved through manual rotation of the handwheel and guaranteed by an electromechanical device. Safety device to prevent accidents on the flywheel guard and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left, 60° right Adjustable stop for cuts of the same size Brush-type bandsaw cleaning device Hydraulic power unit motor: 0.55 kW Electropump: 0.06 kW for bandsaw cooling Vise, jaw height: 200 mm Vise, jaw length: 257 mm Work table height: 760 mm Machine weight: 780 kg Cutting capacity: -0-45-60° Solid round bar 0°: 150 mm Tubular round bar 0°: 350 mm Square bar 0°: 330 mm Rectangular bar 0°: 150 x 320 mm Solid round bar 45°: 150 mm Tubular round bar 45°: 310 mm Square bar 45°: 280 mm Rectangular bar 45°: 150 x 320 mm Gbsdpfx Aez Nh S Ajikow Vise opening: 420 mm Variable speed drive: 20-90 rpm