Used Induct Heating for sale (13,160)

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, total height: 2,600 mm, total length: 12,200 mm, total width: 2,500 mm, overall weight: 13,000 kg, Combined Heat and Power Plant (CHP), Manufacturer: STIEGELE, housed in soundproof special containers, 800 kVA Manufacturer: Stiegele Year of manufacture: 2007 Operating hours: approx. 12,000 per engine Engines: Make: 2 x Scania DC 12-54, Variant A03P Engine speed approx. 1,500 rpm each Electric drive: EMK type KS160L-4-PTC Lodpfx Asy Iu Hnjmnsrl Feed pump: Elektra type DD0705 Mode of operation: Palm oil (primary), Diesel / Heating oil. The CHP was designed for operation with vegetable oil (palm oil) and has been converted accordingly. For continuous operation with heating oil or diesel, technical modifications may be required. Generators: Make: 2x Marelli Type: MJB315MA4 Output: 880 kVA Touch control: Manufacturer Woodward, Type GCP-30 Dimensions (per container): Length: approx. 12,200 mm Width: approx. 2,500 mm Height: approx. 2,600 mm Weight: approx. 13,000 kg The CHP system is modularly installed in two 40" soundproof containers and has been out of operation for some time. The sale includes the containers, control system, and heating oil tank. Viewing and inspection of the system is expressly encouraged. Sale exclusively to commercial customers. Any and all liability for material defects and warranties is excluded. The machine is sold used and as inspected, with no guarantee or assurance of specific properties. Claims for damages are only possible in cases of intent, gross negligence, or injury to life, body, or health.

Condition: ready for operation (used), A good used induction heat sealer model ICS 1H from Relco UK - ideal for low speed semi-automatic or manual line with diaphragm in cap for sealing onto container. Lredpfxsua E Rqs Amnel

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Lrsdpfx Amjyh I Unonol Weight: Estimated: Kg 690.0

Condition: used, Unused approximately 15 square metre vertical shell and tube heat exchanger. Unit has approximately 17.4mm diamater x 2000mm long stainless steel 316 tubes. Unit has a design pressure of 6.0 bar / full vacuum shellside and 10.0 bar / full vacuum tubeside. Unit has a design temperature of 150°c. Unit has a stainless steel 316 shell approximately 2000mm diameter x 330mm straight side. Unit has mounted side support lugs for easy usage. Unit is designed to ASME VIII standard. Lrsdsyh I Uhopfx Amnel Weight: Actual: Kg550.0 Dimensions: 650 X 3000

Condition: excellent (used), Year of construction: 2004, For sale are fully functional and very well-maintained dual-fuel burners from the brands Weishaupt GL7 (1750 kW), with a Dungs gas line DN 50, and Weishaupt GL3 - 630 kW, with a Dn 40 gas line. 1. Weishaupt: GL7 - (1750 kW) Burner type: GL7/1-D Design: ZMD Output: 300 - 1750 kW 32-147 kg/h Year of manufacture: 2004 2. Weishaupt: GL3 - (630 kW) Burner type: GL3/1-E Design: ZD Output: 90 - 630 kW Ledpsh Umbfsfx Amnsrl 16-53 kg/h Year of manufacture: 2006 - Delivery is possible upon request. - All technical data can be seen in the pictures. Preferably sold to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typing or data transmission errors.

Year of construction: 2015, condition: repair required (used), For sale is an industrial water-to-water heat pump from CTA, model OptiHeat 1-65e Duo, with a capacity of 77 kW. Manufacturer: CTA Lrodpfsxxlwvjx Amnel Capacity: 77 kW Year of manufacture: 2015 Origin: Switzerland Note: One of the two compressors needs to be replaced. We have the correct replacement compressor available (brand new and unused): Type: Copeland Scroll ZP137KCE-TFD-455 Refrigerant: R410A Voltage: 380–420 V If you are interested or have any questions, we are at your disposal.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 30531-L-05/13, overall weight: 2,000 kg, power: 45 kW (61.18 HP), heating capacity: 45 kW (61.18 HP), smoke pipe connection diameter: 300 mm, nominal heat output: 45 kW (61.18 HP), space requirement length: 3,000 mm, space requirement height: 2,500 mm, space requirement width: 1,800 mm, temperature: 50 °C, total height: 2,200 mm, total length: 2,400 mm, total width: 1,000 mm, type of input current: three-phase, input voltage: 230 V, filling opening width: 600 mm, filling opening length: 400 mm, control cabinet width: 400 mm, control cabinet length: 200 mm, control cabinet height: 900 mm, nominal power: 45 kW (61.18 HP), This heating system was able to heat our not optimally insulated workshop of approximately 300 m² within a maximum of 25 minutes. Included are around 30 meters of air ducts with closable openings, an additional pump for the most remote room, as well as a heat exchanger with a secondary circulation pump, which supplied underfloor heating to our showroom (office). A high-quality stainless steel chimney, which we are also including, is part of the system. This heating unit is being sold due to the closure of our workshop. Collection in person requested by mid-June 2026. Lodpfx Amsy N Tf Sonjrl

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor - Heat and Control fryer with deoiling belt - Flavour drum Lrodpfx Amsyhc H Ujnol - Gas powered oil heater and oil pump. More information to follow.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1327507695580, power: 575 kW (781.78 HP), total width: 750 mm, total length: 2,200 mm, total height: 750 mm, nominal heat output: 530 kW (720.60 HP), heating capacity: 574 kW (780.42 HP), fuel: domestic gas H, input frequency: 50 Hz, operating pressure: 7 bar, Equipment: type plate available, Remeha boiler installation, Lrodpfx Aeyzq Dcemnol Freestanding, high-efficiency gas boiler. Very tidy machine, Currently still available for on-site inspection. Will be dismantled and prepared for transport by the seller. Collection by appointment. A total of 2 units available, price listed is per boiler.

Condition: used, This listing is for the Thermo Scientific A8150001 Gemini AS Heated Slide Stainer The unit is in full working condition and is ready for immediate use The Thermo Scientific Gemini AS Automated Slide Stainer (Model A81500001) is a high-performance staining system designed for histology and pathology laboratories requiring reliable and reproducible slide preparation. This automated staining instrument simplifies laboratory workflows by processing multiple slide racks simultaneously while maintaining consistent staining quality. The A81500001 model includes integrated heated stations, allowing slides to be dried efficiently during staining protocols. The Gemini AS supports a wide range of histological staining procedures and can be programmed for customised protocols, making it suitable for routine staining as well as specialised laboratory applications. Its high capacity and flexible configuration make it ideal for laboratories handling moderate to high sample volumes. Ledpfx Ameyuylhsnsrl With multiple reagent stations and automated timing control, the system reduces manual handling and ensures consistent staining results, improving overall laboratory productivity. Key Features Automated slide staining system for histology laboratories 5 heated stations for slide drying Capacity for up to 12 slide racks Each rack holds up to 20 slides Up to 26 reagent stations Programmable staining protocols Consistent and reproducible results Ideal for pathology, research, and clinical laboratories

Condition: excellent (used), Year of construction: 2013, Heat exchanger / SPIRAFLO. Type - XTSD 104/64-6-304/316-C Is made in 304 and 316 steel. Year of manufacutre - 2013. Empty weight - 2.000kg. Lredpfx Amjhtuu Uonel Total dimensions - Length - 700cm. Width - cirka 235cm. Height - 200cm.

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor Lrodpfx Amevytfusnsl - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Including units, pumps, and valves Including thermal oil pumps Including thermal oil Including all accessories required for operation The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.

Condition: used, Year of construction: 2006, operating hours: 71,000 h, functionality: fully functional, MTU 16V 4000 GS L61 gas generator. Year of manufacture: 2006. Operating hours: 71,000. Voltage: 10,000 V. Delivery includes: * genset on skid * gas train control panel * pump unit * documentation and logbook. In fully operational condition. Lsdpfx Amey At Awsnsrl

Condition: used, Year of construction: 2001, Wood chip boiler Heizomat HSK RA 500, output 500kW, year of manufacture 2001, incl. cleaning unit, ash removal system in container, feed auger, and control system. Dismantling must be carried out by the buyer! System is fully operational and in use, incl. full documentation! A wall opening to the outside will be created by the customer to allow the system to be rolled outside in one piece. Bunker system is set up for pellets, Heizomat unit is suitable for wood chips. Lredpsvyrwpefx Amnol

Condition: new, power: 14 kW (19.03 HP), inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,000 mm, total length: 1,395 mm, total width: 1,600 mm, total height: 2,045 mm, overall weight: 400 kg, control type: NC control, actuation type: electric, fuel type: electric, continuous power: 14 kW (19.03 HP), Equipment: CE marking, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately according to the delivery address. Please contact us for an individual transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment Please also inquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Oven with Electric Heating – MATOVENB-101010 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Compact ☘️ Efficient ☘️ Professional Curing ✅ Electrically heated powder oven ✅ Compact design for small and medium-sized workpieces ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and curing time ✅ Automatic exhaust fan function adjustable ✅ Acoustic signal at the end of curing time ✅ Insulated door with special locking system ✅ Robust sandwich panel construction ✅ Excellent heat retention through strong insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shut-off after process completion ✅ Can be used with a mobile workpiece trolley ✅ Optional insert shelving system for small series ➖➖➖➖➖ ♨️ Also available with upgrade for up to 500 °C for high-temperature processes (optional) ➖➖➖➖➖ Technical Specifications: ✔️ Electric heating power: 12 kW ✔️ Blower output: 1,500 m³/h ✔️ Circulation fan: 0.75 kW ✔️ Total output: approx. 14 kW ±10% ✔️ Digital temperature control ✔️ Stepless temperature adjustment up to 220°C ✔️ Interior: 1.2 mm galvanized steel ✔️ Exterior: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm ✔️ 50 mm rock wool + 100 mm glass fiber ✔️ Adjustable curing time ✔️ Adjustable exhaust fan function ✔️ Acoustic signal after process end ✔️ Control panel: 1 piece ➖➖➖➖➖ ⚙️ Optional Control Functions ✅ PID control for precise temperature management ✅ Touchscreen control panel and smartphone operation ✅ Ramp heating mode for defined temperature curves ✅ Storage of process parameters ✅ Weekly & monthly reports at the push of a button ➖➖➖➖➖ ⚙️ Safety and Process Control Safety sensor for overheating prevention Automatic shut-off in case of fault Acoustic warning signals for errors Fume extraction via automatic ventilation ➖➖➖➖➖ ♨️ Ramp-Heating Mode (optional) Control temperature profile and holding times precisely, e.g.: • Reach target temperature in defined time • Hold at set temperature for desired period • Controlled cool-down to target temperature • Automatic notifications for process events ➖➖➖➖➖ ✅ No repeated settings required! Lrsdpfx Amswfpp Eensl The oven stores your process parameters – batch after batch. This saves you time and prevents errors. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models so you can flexibly plan your investment. Please contact us for information about leasing, hire purchase, or installment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and secure the advantage of professional service and guaranteed quality! ✨ Custom dimensions or individual configurations are available on request. We are happy to design a suitable solution for your workshop. Inquire now – make your business ready for professional powder coating!

Condition: used, Year of construction: 2008, machine/vehicle number: 972, temperature: 600 °C, inner dimension length: 2,500 mm, inner dimension width: 2,500 mm, inner dimension height: 3,500 mm, overall weight: 20,000 kg, number of chambers: 2, fuel type: gas, Part 1: WQ-98.98.138/35E Shipping weight: 20,000 kg Furnace Data Ljdpfx Aey H I Szemnjrl Max. temperature: 600 °C Temperature uniformity: Continuous process: ±5 °C Maturation process: ±3 °C Usable chamber dimensions Width: 2500 mm Length: 2500 mm Height: 3500 mm Load capacity Max. permissible load (gross): 2200 kg Performance data Heating power (gas): 1000 kW Installed power: 48 kW Technical data Supply voltage: 3 × 400 V / 50 Hz External dimensions Length: 4443 mm Width: 8395 mm Height: 7355 mm

Condition: used, Year of construction: 2006, Gilles wood chip heating system, output 145 kW, year 2006, incl. feed auger with back-burn protection, incl. fuel transport auger, incl. control unit, good condition. Dismantling must be carried out by the buyer. The system is at ground level and can be rolled out in one piece. Forklift available! Ledpfxevgcwme Amnjrl Not included: - Bunker discharge - Chimney

Condition: used, Meurer heat shrink tunnel adjustable temp, variable speed, aperture 400mm x 350mm, mobile frame, Ljdpfxedmn Umo Amnsrl

Condition: like new (used), Ilapak stainless flow wrapping and shrink tunnel line Carrera 2000 PC Lsdjd I Ncgopfx Amnorl stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Lrodpfx Aju Udp Ismnsl

Condition: ready for operation (used), Compressor DWM DLJP-20x-EWL, Compressor DWM DLJP-20x-EWL, Piston Compressor, Cooling Compressor, Heating Compressor, Used machine Technical Specifications Brand: DWM COPELAND Model: DLJP-20X-EWL Refrigerant: Freon Weight: 82 kg Year of manufacture: 1999 Lodpfxju T H Rlj Amnsrl Performance at different temperatures: -20ºC/+40ºC: 4.98 kW -30ºC/+40ºC: 2.75 kW Maximum pressure values: 28/22.5 bar Delivery capacity: 14.50 m³/h Dimensions: Length: 460 mm Width: 330 mm Height: 550 mm Electrical Data: 400V; 5.6A; 1450 RPM

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Ledeyzmagepfx Amnjrl Heat transfer medium: water

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Manufacturer : SPX Lrodpjx Ttu Iofx Amnsl Year : 2012 Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Operating pressure : 10 bar

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Manufacturer : SPX Year : 2012 Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Lrsdpfxsx Da Dus Amnjl Operating pressure : 10 bar

Condition: excellent (used), Year of construction: 2013, Cooling power: 10 kW Heating power: 11 kW Refigerant: R407C Refrigerant diagram, operational limits see at the photos! We have15 unit in stock! Ljdpfjfx S Dajx Amnerl