Used Index Cutting Machine for sale (139)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Blodpfx Ajzlutmsa Ion Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Slide travel x: 82 mm Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, Year of construction: 2018, operating hours: 23,532 h, functionality: fully functional, turning length: 550 mm, spindle motor power: 31,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, torque: 170 Nm, bar passage: 65 mm, total height: 2,490 mm, total length: 6,910 mm, chuck outer diameter: 160 mm, total width: 2,092 mm, bar diameter (max.): 65 mm, spindle nose: 140, overall weight: 9,000 kg, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC lathe, manufactured in 2018, from our own machine inventory. The machine is fully functional and can be inspected and demonstrated in operation at our location. The C200 features extensive equipment, including a main and counter spindle, three tool carriers, and driven tools, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2018 - Control system: INDEX C200-si based on Siemens Sinumerik 840D SolutionLine - Main spindle D65 Bedpez Hmxnjfx Aa Isln - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool carriers - 14 stations per tool carrier - Driven tools - Y-axis on tool carriers 1 and 2 - C-axis on main and counter spindle - Coolant high-pressure supply - Chip conveyor - Part removal / gantry removal system - Interface for bar loader magazine UNIMAG4 - iXpanel operating interface - Connection: 400 V / 50 Hz - Rated power: 54 kW - Connected power: 65 kVA - Rated current: 94 A - Max. fuse rating: 100 A The equipment with three tool carriers, a main and counter spindle, and the existing automation and peripheral technology enables flexible and productive complete machining of series parts. The technical configuration is documented in the original INDEX order confirmation. 20260930101605 Current operating hours according to the machine control system: - Total operating time: approx. 23,532 h - Hydraulic system: approx. 22,288 h - Spindle/drive operating times according to the operating hour counter: - S1: approx. 2,298 h - S2: approx. 4,189 h - S3: approx. 1,954 h - S4: approx. 5,998 h - S5: approx. 8,006 h The machine is currently located at our facility and can be inspected and demonstrated in operation after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed list of equipment upon request.

Condition: excellent (used), Year of construction: 2025, operating hours: 4,077 h, functionality: fully functional, machine/vehicle number: 10511079, turning length: 550 mm, turning diameter: 160 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 140 rpm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, spindle motor power: 32,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, total height: 2,490 mm, total length: 6,910 mm, total width: 2,092 mm, workpiece weight (max.): 4 kg, type of input current: three-phase, torque: 170 Nm, overall weight: 9,000 kg, bar passage: 65 mm, chuck outer diameter: 160 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC turning machine, manufactured in 2025, from our own machine stock. The machine was delivered and put into operation in 2025 and is in very good, like-new condition. The C200 features extensive equipment with a main and counter spindle, three tool turrets with powered tools, and Y-axes, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2025 - Machine No.: 10511079 - Main spindle D65 - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool turrets - 14 stations per tool turret - Powered tools - Tool speed: max. 8,000 rpm - Y-axes on the tool turrets - C-axis on main and counter spindle - Tool monitoring and tool management - Coolant high-pressure supply - Coolant/filter system - Chip conveyor - Workpiece removal / portal extraction device - Interface for bar loader magazine UNIMAG4 - Electronic spindle for spindles and drive power - CE conformity - Rated power: 54 kW - Connection power: 65 kVA - Connection: 400 V / 50 Hz Current operating hours according to the machine control: - On time: approx. 4,077 h - Hydraulics: approx. 3,863 h Bodsz Hmq Depfx Aa Ioln - Spindle / drive running times according to the operating hour counter: S1 approx. 146 h / S2 approx. 1,396 h / S3 approx. 317 h / S4 approx. 1,846 h / S5 approx. 2,224 h The machine is currently located in our factory and can be inspected and demonstrated under power after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed equipment list if you are seriously interested.

Condition: ready for operation (used), Year of construction: 2002, bar diameter (max.): 32 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 12, This 12-axis Index MS32-P multi-spindle turning machine was manufactured in 2002. It features a Sinumerik 840D control system and includes a SIR MS32 face loader for efficient bar loading. The machine is equipped with a robust coolant system, including high-pressure pumps and a fire suppression system. If you are looking to get high-quality turning capabilities, consider the Index MS32-P machine we have for sale. Contact us for further details. - Main Spindles: 6x Drive spindle in drum- Counter Spindle: 1x Counter spindle (Position 6.3 Z with three-jaw chuck)- Axes Configuration: CNC driven and programmed - Slide 1: 1.4 X/Z - Slide 2: 2.4 X/Z - Slide 3: 3.1 X/Z, 3.2 X/Z, 3.4 X/Z - Slide 4: 4.1 X/Z, 4.2 X/Z, 4.4 X/Z - Slide 5: 5.1 X/Z, 5.2 X/Z, 5.4 X/Z - Slide 6: 6.1 X/Z, 6.3 Z- Additional Drives: 6x Auxiliary electric drives for cross-drilling or milling units (3 per NCU)- Control System: Sinumerik 840D (Index C200-4D) Dual NCU- Material Handling / Automation: Part catcher with conveyor belt- Bar Loader: SIR MS32 Face Loader- Coolant System: Connected to central coolant supply system (Knoll System)- High-Pressure Pump 1: 80 bar (24 liters/min at 80 bar)- High-Pressure Pump 2: 40 bar (55 liters/min at 55 bar)- Low-Pressure Pump: 250 liters/min at 3 bar- Fire Suppression System: Included- Coolant Mist Extraction & Filtration System: SH 2000-PEV-T/TR (two-stage design)- Process Monitoring System: Integrated ARTIS process monitoring system (DEFECTIVE)- Synchronization Device: For quill spindle position 6 (counter spindle)- Tooling Components: WTO driven tool holders visible in machining area- Tooling Status: Offered as basic machine without tools, holders, or live tool units (tools and bar feeder accessories available upon request) Technical Specification Counter Spindle Yes Bledpfjz E Inhex Aa Ion

Condition: excellent (used), Year of construction: 1999, - Manufacturer: INDEX - Model: ABC - Machine Type: CNC turning center - Max. bar diameter: 52 mm - Max. main spindle speed: 5,000 rpm - Main spindle power: up to 20 kW - C-axis: available - Synchron/counter spindle: available - Max. counter spindle speed: 4,500 rpm - Max. clamping diameter of counter spindle: 42 mm - Turret 1: 8 tool stations - Driven tools: available - Max. speed of driven tools: 6,000 rpm - Tool drive power: 3.3 kW Bjdpfsz E Hu Tex Aa Isln - Turret 2: 6 tool stations - Linear tool carrier: max. 6 tools - Rapid traverse: up to 24 m/min - Coolant tank: 210 l - Hydraulic pressure: 90 bar - Machine height: 1,750 mm - Footprint: approx. 2.4 m² - Machine weight: approx. 2,500 kg - Bar loader: up to Ø 52 mm - Chip conveyor: available - Workpiece removal via conveyor belt: available

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 215 mm, travel distance Z-axis: 1,250 mm, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 RatioLine was manufactured in 2000. It features a nominal power of 43 kW and a robust machine weight of 6550 kg, ensuring stability during operation. If you are looking to get high-quality turning capabilities, consider the Index G300 RatioLine horizontal turning machine we have for sale. Contact us for further details. - Current Type / Frequency: 3 Ph / 50 Hz- Nominal Voltage: 400 V~- Control Voltage: 24 V-- Nominal Current: 78 A- Nominal Power: 43 kW- Cabinet Weight: 710 kg Bedjz Hb Nhopfx Aa Isln Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 6,000 rpm, bar passage: 65 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Bsdpfez Ibf Eox Aa Ijln Tool turret Number of turrets: 3 Tool holder: VDI 25 W-gear Main and counter spindle Main and counter spindle speed: up to 6,000 rpm Bar diameter: 65 mm MACHINE DETAILS Coolant tank: 600 l Coolant pressure: 8 / 18 bar EQUIPMENT Gantry removal device Hainbuch HS Axzug / GS Axfix Chip conveyor Coolant tank with strainer basket Coolant pump Coolant cooling unit FMB Turbo 10-65, 3-meter bar feeder

Condition: ready for operation (used), Year of construction: 2011, operating hours: 27,865 h, bar diameter (max.): 24 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 6, This 6-axis Index MS 22 multi-spindle turning machine was manufactured in 2011. It features a Siemens Sinumerik 840D control system and includes a bar loader system with a maximum pressure of 6 bar. The machine is equipped with a Knoll coolant/filter system and various tooling attachments for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Index MS 22 machine we have for sale. Contact us for further details. - Nominal Voltage: 400 V- Rated Current (In): 99 A- Short Circuit Current (Icu): 50 kA- Peak Current (I2): 3.6 kA- Maximum Backup Fuse: 100 A- Rated Power: 64 kW- Connected Load: 67 kVA- Frequency: 50 Hz- Control Voltage: 24 VDC- Operating Hours: 124,075 h- Hydraulic Operation Hours: 61,189 h- Operating Time: 37,971 h- Production Time: 27,865 h- Control System: Siemens Sinumerik 840D powerline (Index C200-4D) with Dual NCU- Bar Loader System: IEMCA / SIR MS22 P flat loader, Type 33 (YOM: 2011, Pressure: 6 bar, Mass: 100 kg, Voltage: 400 V / 50 Hz, Current: 7 A)- Material Feeders: 1 set Ø12 with reducer tubes, 1 set Ø18 with reducer tubes, 1 set Ø24- Clamping Heads: Ø9, Ø10, Ø12 – Ø18, Ø20 – Ø22- Knoll Coolant/Filter System (YOM: 2011): 1x high-pressure pump (80 bar, 24 l/min), 1x high-pressure pump (40 bar, 55 l/min), 1x low-pressure pump (300 l/min at 4 bar)- Tooling Drive Connections: 2x electrical connections on NCU 1, 3x electrical connections on NCU 2- Tooling Attachments: 1x polygon turning device, 3x powered tool holders ER11 (i = 1:2, max speed 12,000 rpm), 1x powered tool holder VDI25 (i = 1:1, max speed 6,000 rpm)- Back-machining Unit: on slide 6.3 (with 2x powered tool holders, 1x fixed holder, i = 1:2, max speed 12,000 rpm)- Optional Equipment: Fire suppression system, Coolant mist extraction and filtration system (SH 2000-PEV-T/TR, two-stage design), Integrated ARTIS process monitoring system Technical Specification Bljdpfx Aaoz Ahy Io Ijn Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2012, operating hours: 75,685 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 85 mm, travel distance Z-axis: 280 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, number of axes: 7, This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Spindle hours: • S1 – 18914h • S2 – 661h • S3 – 3h • S4 – 29211h • S5 – 2413h • S7 – 1250h • The synchronous spindle was renewed in September 2024 • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) Bsdpjzvu Ryefx Aa Ieln • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Specifications, information, price, images, etc. can be found in the PDF documents attached. Bodpfjzuc T Tsx Aa Ioln

Year of construction: 2004, condition: used, An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement. Bsdpfjzu Sz Tex Aa Ioln

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Bsdpfjyx Tzrox Aa Ieln Thread cutting gearbox Cucci Giovanni integral loader Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: used, Year of construction: 2009, control SIEMENS - - - - - - - - - - - - - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600 Bjdezz S Iyopfx Aa Ijln

Condition: used, Year of construction: 2008, control SIEMENS - - - - - - - - - - - - - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Bedpfezz S Itex Aa Ioln Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 10 - Number of turrets : 3 MAIN SPINDLE - Spindle nose : AD140 - Spindle power : 25 / 33 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. chuck diameter : 160 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : AD140 - Spindle power : 25 / 33 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 160 [mm] - C axis indexing precision : 0,001 [°] - Travel : 700 [mm] - Rapid traverse rate : 50 [m/min] - Spindle / counter-spindle distance : 710 [mm] UPPER LEFT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 110 / 320 [mm] - Y stroke : 100 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] UPPER RIGHT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X stroke : 180 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] LOWER LEFT TURRET - Number of positions : 14 - Number of motorized positions : 14 - X/Z stroke : 110 / 550 [mm] - Y stroke : 100 [mm] - Tool type : VDI 25 - Live tools speed : 8.000 [rpm] - Live tools power : 6,5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 64 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 6.618 x 1.794 [mm] Bodpfx Aaozz Ayme Ieln - Machine height : 2.139 [mm] - Machine weight : 9.000 [kg] MACHINE HOURS - Number of hours under power : 59431 [h] - Number of spindle hours : 29663 [h] EQUIPMENT - CNC : C200-4D (SIEMENS 840D) - Interface : Ethernet / USB - 3 colors status lamp - Options : Transmit / Tracyl - Tool breakage detection - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Spindle cooling unit - Coolant through spindle : et tourelles - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : INDEX MBL capacité 3.000 [mm] - Collet chuck : 2 HAINBUCH Spanntop Kombi Axfix Ø65

Year of construction: 2008, condition: ready for operation (used), Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, short slide travel Z: 710mm/1250mm, feed force X/Y/Z: 8kN/16kN/13kN, rapid traverse: 20m/min, tool stations: 12. Documentation available. An on-site inspection is possible. Bsdpfjznmxmjx Aa Ieln

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 57,000 W, overall weight: 14,000 kg, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This 3-axis Index G250 horizontal turning machine was manufactured in 2008. It features a maximum swing diameter of 560 mm and a turning length of 800 mm. The machine is equipped with a Siemens 840 D control system and offers a spindle speed range of up to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the Index G250 machine we have for sale. Contact us for further details. Bodpfx Aaezzmdce Ieln - Maximum Swing Diameter: 560 mm- Turning Length: 800 mm- Control System: C200-4D Siemens 840 D- Spindle Head: 8 DIN 55026/55021 ISO 7027/1- Bar Capacity: 90 mm- Spindle Diameter at Front Bearing: 140 mm- Drive Power – Spindle Motor (100% / 40%): 43 / 57 kW- Torque: 275 / 363 Nm- Indexing: 2.5°- C-Axis: 0.001°- Speed Range – Driven Tool Stations: ~6,000 min⁻¹- Drive Power – Driven Tool Stations: 11 kW- Torque (Driven Tools): 21.5 Nm- Rapid Traverse X/Z: 30 / 22.5 m/min- Feed Force (X): 7,200 N- Feed Force (Z): 9,000 N- Quill Diameter: 65 mm- Total Power Requirement: 51 kVA- Footprint: approx. 7.3 x 4.0 x 2.6 m- Optional Equipment: KNOLL chip conveyor system attached to the rear/side Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 300 mm, travel distance Z-axis: 1,400 mm, total height: 2,400 mm, total width: 2,560 mm, overall weight: 13,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, product length (max.): 5,460 mm, number of axes: 8, This 8-axis Index G250 turn-mill centre was manufactured in 2004. It includes a Knoll chip conveyor, EMAG cooling unit, and ISI mist extraction system. The machine features a hydraulic power chuck with a clamping range of 125–152 mm and an overhead gantry loader for automation. If you are looking to get high-quality turning and milling capabilities, consider the Index G250 machine we have for sale. Contact us for further details. Bodpfeznc Nbsx Aa Isln - Control Unit: Siemens SINUMERIK / INDEX C 200-4D- Rated Voltage: 400 V AC (3 Phase, 50 Hz)- Rated Current: 74 A- Rated Power: 43 kW- Control Voltage: 24 V DC- Tool Turret: 12-station tool turret with driven/live tool capability (individual powered tools are not included in the scope of delivery)- Workholding: Main spindle with hydraulic power chuck / collet system, SMW-Autoblok SLU-3-ZS hydraulic power chuck (clamping range 125-152 mm)- Steady Rest: SMW-AUTOBLOK / Original SMW Steady Rest (Type: SLU-3-28, Clamping range: 12-152 mm, Max. operating pressure: 60 bar)- SMW Autoblok steady rest: • hydraulic/self-centering steady rest • mounted on its own lower slide • suitable for providing additional support for long or thin workpieces- Tailstock unit with a rotating center on the right side of the work area for supporting longer workpieces- Hydraulic System: Integrated hydraulic power unit operating at 95 bar pressure- Automation / Gantry Loader: Promet Automation gantry loading system overhead- Coolant / Chip System: Knoll chip conveyor / coolant unit (YOM: 2004)- Chiller Unit: EMAG Chiller / Cooling Unit (YOM: 2016, Cooling capacity: 9.5 kW, Refrigerant: 2.5 kg)- Mist Collector / Air Cleaner: ELBARON / ISI RON / A 2500 Electrostatic Air Cleaner / Mist Extractor (YOM: 2004)- Documentation Included: Complete documentations, operating manuals, etc.- Transport Dimensions (L x W x H): Approx. 5460 x 2560 x 2400 mm (width reducible to 2450 mm)- Machine Weight: Approx. 13,500 kg Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 5,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 710 mm, spindle motor power: 43,000 W, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 was manufactured in 1998 and retrofitted in 2022. It features a maximum nominal turning diameter of 270 mm and a turning length of 710 mm. The machine has a maximum spindle speed of 5,000 RPM and a robust tool system with 12 positions. If you are looking to get high-quality turning capabilities, consider the Index G300 horizontal turning machine we have for sale. Contact us for further details. Bsdpfx Aaozzq E De Ieln - RETROFIT IN 2022- Max. Nominal Turning Diameter: 270 mm- Turning Length: 710 mm- Max. Swing Diameter: 590 mm- Machine Weight: approx. 6,550 kg (Cabinet weight: 710 kg)- Floor Space: approx. 8/10 m²- Spindle Collet Clearance: 65 mm- Spindle Diameter in Front Bearing: 110 mm- Spindle Nose: ISO 702/1 Size 6- Max. Torque (100%): 275 Nm- Tailstock: Electrically movable- Distance Between Centers: 740 mm- Max. Pressing Force (electric): 10,000 N- Compound Slide 1 XYZ (top) Travel (X-axis): 215 mm- Compound Slide 1 XYZ (top) Travel (Y-axis): 180 mm- Compound Slide 1 XYZ (top) Travel (Z-axis): 710 / 1,250 mm- Feed Force (X-axis): 8,000 N- Feed Force (Y-axis): 16,000 N- Feed Force (Z-axis): 13,000 N- Rapid Traverse Speed (X-axis): 20 m/min- Rapid Traverse Speed (Y-axis): 7.5 m/min- Rapid Traverse Speed (Z-axis): 20 m/min- Axis Resolution (X-axis): 0.0005 mm- Axis Resolution (Y-axis): 0.0005 mm- Axis Resolution (Z-axis): 0.001 mm- Number of Tools: 12- Tool System: DIN 69880 (Ø30x55 mm)- Complete documentation available Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, TECHNICAL DETAILS - Number of axes : 11 - Number of spindles : 2 Bledpozgx Ahjfx Aa Ijn MAIN SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] - Travel : 610 [mm] TURNING-MILLING SPINDLE - X stroke : 580 [mm] - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 140 - Tool exchange time : 6 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 114 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4800x2960 [mm] - Machine height : 3170 [mm] - Machine weight : 18500 [kg] MACHINE HOURS - Number of hours under power : 57184 [h] - Spindle hours : 1756 [h] - Number of turning-milling spindle hours : 1694 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Workpiece probe : Renishaw

Condition: good (used), functionality: fully functional, 2 Index MS 25 E machines in very good condition and fully functional – also available individually – for sale. Inspection while the machines are powered on is possible. Bjdpszicxlefx Aa Ijln

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Manufacturer: INDEX Model: G300 CNC: Siemens Sub spindle lathe X-axis: 215 mm Bjdsypliuspfx Aa Ieln Y-axis: 180 mm Z-axis: 710 mm Turning diameter: Ø300 mm Chuck diameter: 250 mm Spindle nose: ISO 702/1 A8 Spindle speed: 4,000 rpm Spindle bore: Ø90 mm Motor power: 44 kW Tool turret: 12 positions Machine dimensions: 4350 x 2900 x 2700 mm Machine weight: 6550 kg.

Condition: used, Year of construction: 2011, Offers considered prior to auction Blsdpfx Asz H Uzwea Isn Index MS32C Multi-Spindle Automatic Lathe. Serial No. 150759 (2011) with Siemens Sinumerik/Index C 200-4D Control, Imeca Sir-MS32 Bar Feed, Riedel Chiller Location: These lots are located in Barnstaple, Devon UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2012, swing diameter 560 mm turning length 800 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° Number of Turrets 1 number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 40 x 63 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -z axis 800 mm rapid traverse X/Z: 30 / 22,5 m/min feed power X: 7.200 N feed power Z: 9.000 N dia. of quill 65 mm Cone SK 30 longitudinal travel 800 mm rapid traverse 10 m/min total power requirement 51 kVA Bedpjx Emp Nefx Aa Ioln weight of the machine ca. ca. 14 t dimensions of the machine ca. 7,3 x 4,0 x 2,6 m CNC Turning- and Milling Center INDEX - G 250 - Precision package for main or counter spindle - Selected spindle housing - Bearingless clamping cylinder - Precision balancing of work spindle, clamping cylinder, and collet clamping

Year of construction: 1995, condition: ready for operation (used), A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible. Bjdeym Dgmjpfx Aa Isln