Used Hps for sale (5,911)

Condition: refurbished (used), Year of construction: 2016, operating hours: 3,660 h, load capacity: 2,000 kg, lifting height: 122 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,500 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 682 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are comprehensively refurbished according to FEM-4.004 and current safety standards – ensuring maximum quality and safety for you. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle undergoes thorough inspection and reconditioning. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after the purchase Test on site and get expert advice – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: Order Picker ECE 220 HP Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2016 Operating hours: 3,660 Lift height: 122 mm Mast type: None Free lift: No Initial lift: Yes Overall length: 2,550 mm Overall width: 800 mm Overall height: 1,500 mm Fork length: 1,150 mm Unladen weight: 682 kg Load centre: 600 mm Tyres: Polyurethane Model type: ECE 220 HP Battery type: PzS Voltage: 24 V Battery weight: 380 kg Charger: On request Cabin features: Elevating operator platform Kodpsy Rpdajfx Anwodn

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,447 h, load capacity: 1,000 kg, lifting height: 840 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, fork length: 1,150 mm, empty load weight: 1,232 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION Our forklifts are technically overhauled to FEM-4.004 and current safety standards – ensuring maximum quality and your safety. From chassis to battery, drive system to brakes, steering, and electrics – each vehicle is thoroughly inspected and restored. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available Kdjdpoy Rnvbefx Anwsn ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on-site and get expert advice – we’ll find the right solution for you. Industrial Truck Specifications: Manufacturer: Jungheinrich Model: Order Picker ECE 310HP Drive type: Electric Load capacity: 1,000 kg Year of manufacture: 2019 Operating hours: 3,447 Lift height: 840 mm Mast type: None Overall length: 2,650 mm Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 1,232 kg Load centre: 600 mm Tyres: Polyurethane Model type: ECE 310HP Battery type: PzS

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,545 h, load capacity: 1,000 kg, lifting height: 840 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, fork length: 1,150 mm, empty load weight: 1,232 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are fully overhauled according to FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From frame to battery, including drivetrain, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Stringent technical inspection ✔ 400+ vehicles available Kdjdpfxey Rnu Re Anwon ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on site now and get professional advice – we will find the right solution for you. Industrial Truck Data: - Manufacturer: Jungheinrich - Model: Order Picker ECE 310HP - Power type: Electric - Load capacity: 1,000 kg - Year of manufacture: 2019 - Operating hours: 3,545 - Lift height: 840 mm - Mast type: None - Overall length: 2,650 mm - Overall height: 1,400 mm - Fork length: 1,150 mm - Unladen weight: 1,232 kg - Load centre: 600 mm - Tyres: Polyurethane - Model type: ECE 310HP - Battery type: PzS

Condition: good (used), Year of construction: 1993, Pressure 150 t folding length 3550 mm column width 3050 mm Control Cybelec DNC 880S stroke 700 mm throat 350 mm machine weight approx. 15.000 kg machine height 3.900 mm Kodpfogz S S Sox Anwodn Accessories/equipment: - Bending aid in front of the machine - Parking space for bending aid - 3 pieces stop fingers

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 Kdodpfx Aswlip Eenwsn consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Available immediately. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1991, We are selling our Hydrap 160-ton press. The system is only available for sale as a complete unit. Operating hours: 20,242 Condition: good Kdjdetu Szljpfx Anwen Inspection is possible and welcome. Location: Szügy / Hungary

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 Kodpfx Ajy D Sy Rsnwsdn - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW Kdodpfo Dqaqjx Anwsn weight: 20 t space needed: 2100 x 3800 x 3100 mm

Condition: good (used), Year of construction: 2004, machine/vehicle number: 1855680, functionality: fully functional, power: 4 kW (5.44 HP), input frequency: 50 Hz, pressing force: 80 t, table width: 800 mm, table length: 1,400 mm, operating pressure: 270 bar, Manufacturer: Joos Model: HP-S 80 Year of Manufacture: 2004 Pressing Power: 800 kN Three-Piston Suitable for woodworking and industrial applications Well-maintained and in good working condition Previously used in a company setting, reliable and durable. Despite the dust, this Hydraulic Press continues to deliver reliable performance. Kodpfxjrp D Eae Anwedn Contact us today to arrange a viewing or to inquire further information.

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Kdedehrakvopfx Anwon Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut Kodofndy Njpfx Anwsdn -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping upper tool quick change system crown 3 sets of tools included Kodpfx Aed Ih S Uenwodn

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: - max. working length 1250 mm - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - with: - CNC - control CYBELEC DNC 7400 PSGY - controlled X - axis back gauge 5 - 1000 mm - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm Kdodeb Rk Ekopfx Anwjn

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm Ksdpfotqmvzox Anwodn - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: used, functionality: fully functional, For sale is a Linde truck with ride-on cab. The machine can transport 2000 kg at a height of 2135 mm and 1,200 kg at a height of 1200 mm Kdodpfx Anjrz R Ebswon The device has a low lift, as well as a high lift, which makes it ideal should a hall floor be uneven in some places The battery is no longer the best but is still functional. The device can be tested with us On request, loading and transport can be organized for an additional charge All prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours?

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,213 h, load capacity: 1,200 kg, lifting height: 242 mm, fuel type: electric, mast type: simplex, construction height: 860 mm, fork length: 1,140 mm, drive type: Elektro, Stand-on forklift Fork width: 180 mm Fork thickness: 50 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: none Technical condition: good Battery voltage: 24V Battery capacity: 500Ah Kedpfx Asw Rhmxenwsdn Battery manufacturer: Exide Battery type: lithium-ion Battery year: 2021 Description: Find your forklift at STA-TECH! Whether pallet trucks, electric, diesel, or LPG forklifts – we offer affordable, ready-to-use models and new forklifts. STA-TECH is your partner for: • Purchase and rental of forklifts and warehouse equipment • Purchase of used machinery and logistics • Multi-brand service: repairs, maintenance, inspections

Condition: used, functionality: unexamined, machine/vehicle number: W4X133Y01284, Year of construction: 2021, operating hours: 5,829 h, load capacity: 1,200 kg, lifting height: 1,924 mm, construction height: 2,200 mm, fork length: 1,150 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Overall height: 2,200 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Standard Dimensions & Weight Dimensions (L x W): 2,500 x 800 mm Weight: 1,500 kg Battery: 48V 375Ah, measured at 25.05 V Operating hours: 5,829 h EQUIPMENT Initial lift – lifts 2 pallets simultaneously / good ground clearance for uneven surfaces Former Linde full-service machine Kjdpfoyxcb Uox Anwsdn All dimensions are approximate. No liability for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY upon receipt of payment confirmation email! Collection WITHOUT appointment Monday to Friday 7:00–16:30. A mast that is too high can be dismantled for transport upon request. If machines are not collected within the agreed deadline, a storage fee of €20 per machine per day will apply (the balance must be settled before collection).

Condition: used, Year of construction: 2020, total length: 1,550 mm, lifting height: 200 mm, load capacity: 2,500 kg, Warehouse technology Kedpfxexd Hxro Anwjdn Still Handhubwagen HPS25 Drive No Drive Year built 2020 Lifting height (mm) 200 Lifting weight (kg) 2,500

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Kjdpjw R Aamefx Anwodn Pressure: 63t Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Stroke length: 600 mm Daylight: 800 mm Cushion: 20t

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Pressure: 63t Down table dimensions: 700x700 mm Kdedpfxew Slnis Anwjn Up table dimensions: 600x600 mm Stroke length: 600 mm Daylight: 800 mm Cushion: 20t

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, controller model: Cybelec ModEva 12S, working width: 8,050 mm, bending force (max.): 320 t, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S Kjdow Sttaspfx Anwjdn EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Kdsdetva Dnopfx Anwon

Year of construction: 1990, condition: used, pressure 100 t throat 260 mm stroke 300 mm Kdodeb U Hvaepfx Anwsn table-size 500 x 500 mm ram head dimension 650 x 500 mm dayligth 700 mm oil volume 600 l capacity of ejector in table 40 t return capacity 13 t total power requirement 22 kW weight of the machine ca. 7 t dimensions of the machine ca. 2.07 x 2.48 x 3.3 m - Ejector in the table, pressure 40 t, stroke 100 mm - Laterally movable work area protection with ESPE (light barrier) this with cycle operation - Cooling, behind the machine, backwater boiler (beige) air cooler (grey- blue), along with complete piping and control etc. - Press safe for unrestricted manual insertion operation - Documentation in german available

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,990 h, load capacity: 1,200 kg, lifting height: 1,574 mm, fuel type: electric, construction height: 1,315 mm, drive type: Elektro, Double-deck forklift Condition: Ready for use and fully functional Technical condition: good Kdodpfx Asu Add Ronwsn

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,176 h, load capacity: 1,200 kg, lifting height: 1,924 mm, fuel type: electric, mast type: simplex, construction height: 1,490 mm, drive type: Elektro, Pedestrian stacker Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Kdodpfx Ajwvc E Ujnwen Initial stroke,