Used Horizontal Machining Centre for sale (66,879)

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 0-250-95-6951, functionality: fully functional, operating hours: 682 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, working width: 1,415 mm, spindle motor power: 10,000 W, working length: 3,100 mm, 2017 HOMAG Weeke Venture 115 CNC machining centre in excellent condition. Lightly used machine with very low spindle hours for age. Moved once since initial install. Machine is currently installed, calibrated, and available for inspection under power. - 10kw spindle - 18 position drill block with grooving saw - Multipurpose saw 118mm cut depth - 22 position tool change capacity - Pod & Rail Table with LED positioning indicator This is a clean, well-kept machine from a low-use environment, not a hard-worked production machine. Important point on specification: the machine is 5-axis capable, but the additional 5-axis software licence is not included in the sale. This can be added via Homag at additional cost if required. Buyer responsible for decommissioning, loading, transport and insurance. Machine available for demonstration in situ by appointment. Gbjdpfoy S Dfbjx Afken

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm Gsdpsypv T Rjfx Afkobn 50-position tool changer Chip conveyor Weight: 20,800 kg

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Gbsdpfxsv N Di Ae Afkon Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), Year of construction: 1998, Used Kitamura machining centers Type: Mycenter 2X Yasnac CNC control Max. spindle speed: 10,000 rpm Excl. clamping on the table Tool holder: SK 40 X: 610 mm Y: 510 mm Z: 510 mm Tool changer Godpfoy U I H Isx Afkobn

Condition: used, Year of construction: 2010, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Heidenhain iTNC 530 tool taper SK 50 number of tool places 120 Pos. On-time hours ca. 66737 h spindle hours ca. 36316 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Fully protective cabin with sliding doors and interior lighting - Setup room - Tool measurement in the work area with BLUM laser - 3D measuring probe - Operating modes 3 bar internal coolant supply with 600 l tank and paper belt filter - Chip flushing gun with 1 bar/ l pump Gsdpfx Afjzcq Dqekobn - Chip conveyor - Brankamp monitoring system - 3-color signal light - Coolant ring nozzle - Blow-air cooling system - Coolant system - Oil/emulsion mist separation system - Control cabinet cooling unit - Operating manuals Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2014, - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: Godpsx Hwhxefx Afkebn - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, operating hours: 1,850 h, total height: 2,200 mm, total length: 4,550 mm, total width: 2,200 mm, Colour: White Empty weight: 3.000 kg - Year: 2018 - Documentation available: No - CE marking present: Yes Gbedoy U Hmyepfx Afksn - CE certificate present: Yes - Serial number: AH00000267 - Operating hours: 1850 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Safety feature: Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 2.2 - └ Connection diameter [mm]: 33 - └ Oil free: Yes - Working range X [mm]: 3050 - Working range Y [mm]: 1250 - Z-axis working range [mm]: 130 - Installed length [mm]: 7000 - Installed width [mm]: 4000 - Installed height [mm]: 2400 - Transport dimensions: 4550mm x 2200mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2023, operating hours: 2,594 h, functionality: unexamined, machine/vehicle number: 6000030, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 2,594 h KNOLL aerosol extraction system AerosolMaster 4000 ATS S/N 1580192 Gedpfszbt D Dox Afksbn Year of manufacture: 2022 KNOLL chip conveyor 750 K-1 S/N 1591356 Year of manufacture: 2023

Condition: good (used), Year of construction: 2017, 4 axes Travel range: X = 730 mm, Y = 730 mm, Z = 880 mm Gbedpfszcxwfjx Afkjn High pressure: 70 bar Tool holder: HSK-A63 Knoll KF 110/700 Pallet changer / shuttle table Number of tool stations: 60 Chip conveyor

Condition: used, Year of construction: 2016, Mazak Variaxis i-500 5 Axis CNC Machining Centre. S/No. 276584 (2016) with Mazatrol Smooth X CNC Control, 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Mazak Spindle Chiller Unit, Absolent A Mist 10 Oil Mist Filter Extractor, Cromer Swarf Management and Filtration System, Renishaw RMI-Q Tooleye, Machine Weight 8000kg. Country of Origin: Japan Gbjdpsy Shk Usfx Afkjn Please Note: Erowa Machining Fixture Not Included Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2016, condition: used, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 268148 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included. Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Gsdpfxsy Shknj Afkobn

Condition: used, Year of construction: 2016, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 276585 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Gsdpoy Shiwsfx Afkebn Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2022, Mazak VTC 820/20 CNC Vertical Machining Centre with Mazatrol Smooth G Touch Screen CNC Control. S/No. 323190 (2022), Table Size 2500mm x 820mm, Spindle Speed Max 18,000rpm, CAT40 Spindle Taper, 30 Tool ATC Fitted with Various Tool Holders and Renishaw Probe, Cromar Series IV Swarf Coolant System, CIL 1501 Chiller Unit, Clara 3nine Oil Mist Filter Extractor, Machine Weight 14,000kg. Country of Origin: United Kingdom Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described Gsdpfoy Shhyjx Afkjbn

Condition: used, Year of construction: 2004, Horizontal machining center Manufacturer: Makino Type: a51-A60 Year of manufacture: 2004 Control: CNC FANUC System 16 iM Travel ranges: X/Y/Z: 560 x 560 x 500 mm Distance from table center to spindle nose: 70 – 570 mm Maximum swiveling height above pallet surface: 900 mm Permissible swiveling range in the work area: 630 mm Tool magazine: 60 storage locations Maximum load weight: 180 kg 4-digit T-code, freely assignable Tool change time: 0.9 sec. Maximum tool dimensions: Ø 70 mm, 360 mm long Maximum tool weight: 8 kg Spindle unit 50 – 12,000 rpm Spindle unit with tool holder for tapered shanks according to DIN 69893 HSK-A63 Tool clamping force: 29 kN Pallet changing system, integrated into the machine Gbodpfezc Ifrsx Afken Pallet change time: 7 sec. Pallet changer with placement of the 2 pallets in alternating sequence on the storage station Pallet holder is rotatable, with 90° indexing 0-position controlled electronically. Permissible load weight max.: 400 kg Pallet size: 400 x 400 mm High-speed machining Contour milling with feed rates up to 40,000 mm/min. Function can be used for milling in 3 axes X, Y and Z 2 ½ axis operation (X/Y axis circular, Z axis linear) for thread and contour milling Direct thread cutting through synchronization of the feed drive of the Z axis via pulse encoder in the spindle motor Maximum speed: n = 4,000 rpm Feed drive with AC servomotors Rapid traverse speeds X, Y, Z axis = 1 ... 50,000 mm/min. Feed rates X, Y, Z axis = 1 .. 40,000 mm/min. Manual operation, freely movable, via direction keys Coolant system Chip and splash guard central chip/flushing system Machine light All-round flashing light, 3-color Total weight: 7,800 kg Space requirement approx.: 11.5 m2 Overall height approx.: 2.7 m 2 machines available! 12626

Condition: used, Year of construction: 2005, Mazak Variaxis 730-5X CNC Vertical Machining Centre. S/No. 567181684 (2005). Country of Origin: Japan Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Gedjy Sha Aepfx Afkebn

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm Gjdpfxezc D Ens Afkebn No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC-Steuerung Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Gbodpfx Afozc Dyljksn Further information: Coolant system = 1250 l

Condition: good (used), Year of construction: 2013, functionality: fully functional, Fanuc Oi-MD control system, 40-position automatic tool changer, spindle mount conforming to DIN 69871-SK40, internal coolant supply, dual-pallet system, pallet size 500x500 mm, chip conveyor, Gbjdpszcxh Refx Afkjn coolant system with filtration.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 560 h, functionality: fully functional, machine/vehicle number: Na, type of input current: AC, total length: 4,000 mm, total height: 1,420 mm, total width: 770 mm, input voltage: 220 V, film width: 360 mm, number of blades: 1, 🔥 URGENT SALE – Automatic Flow Wrapper / Pillow Packing Machine (TESTED & READY TO RUN) Priced to sell quickly. First serious buyer takes it. Fully automatic Foshan flow wrapping machine – used but fully tested, running perfectly, and ready to go straight into production. ⚙️ KEY SPECS 220V | 2.4kW 5–50 packs/min Max film width: 350mm Bag size: 25–220mm length Machine size: 4000 x 920 x 1500 mm Weight: 680kg 📦 WHAT IT CAN PACK Food, snacks, bakery items, hardware, small products, clothing — anything suitable for pillow wrapping. 🎥 PROOF Video of machine running available You can see it working before purchase Gsdjywunkspfx Afksbn 📞 MESSAGE NOW If you’re ready to move forward, message me now to secure it.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 123426, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik System 800 - 840C, workpiece weight (max.): 2,000 kg, table width: 630 mm, table length: 800 mm, overall weight: 24,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 2,300 rpm, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 161, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used Dörries Scharmann Solon 2 DBF horizontal machining center, year of manufacture 1996. Gsdpfxeyu Srts Afkebn Manufacturer: Dörries Scharmann Model: Solon 2 DBF Year of manufacture: 1996 Condition: used Category ID: 1289 Type ID: 4161 Machine type: horizontal machining center If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 007841, X axis working area: 4200 mm Y axis working area: 1200 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 4 axes Maximum edge height: 64 mm Gjdpfoyg Ef Dex Afkebn Total number of tool changer positions: 18

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm weight of the machine ca.: 14 t size of pallet: 320 x 320 mm number of spindles: 2 Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Gsdpfxew Ng D He Afkobn Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *

Condition: used, Year of construction: 2002, Technical details: spindle speed:: max. 12000 tool taper: HSK 80 . b-axis: 360 x 0,001 ° worktool support (A-axis): ° weight of the machine ca.: 25 500 Kgs. x-travel: 800 mm y-travel: 700 mm z-travel: 630 mm dimensions of the machine ca.: 6200 x 3000 x 3200 mm pallet size:: 500 x 500 mm no. of tools in the magazine: 61 Nos. Weight approx.: 23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle Gbedpfx Afjwdywdjken *

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar Gjdpfx Ajzbmzvofkjbn - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2009, 1 unit horizontal bending machine KUNKEL MB10 Capacity: 10 tons, operating voltage: 400V, 1.1kW Color: as shown in the pictures, in accordance with the images and upon inspection Year of manufacture: 2009 Godpfx Afjzclukjksbn Condition: used Location of the goods: production hall Payment method: prepayment by bank transfer Shipping: self-collection only from the Coburg location