Used Holzher Edge Banding for sale (169)

Condition: used, Holz Her Sprint 1312 FÜ + PU Fodj Aitdajpfx Aikspp Heavy-duty design – edge thickness 0.4 - 12 mm PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: used, Holz Her Sprint 1329 Multi Heavy-duty version - Edge thickness 0.4 - 8 mm (15 mm with tool change) Edge Control 19 control system, 18.5" touchscreen color display 16:9 ECO mode - energy-saving mode fa.s.t. setting technology "Tool change in the gap" iTronic - adaptive pressure and adhesive application control and cleaning routine Fpsds Aitldepfx Aikop Motorized, position-controlled bridge height adjustment Long infeed guide rail, motorized, controlled via PLC Pre-milling unit for attachment before the gluing station Edge magazine, fully automatic for coil and strip material Gluing unit GLU-JET GJ301 automatic, cartridge system - granulate + PU adhesive, thin-film technology Edge height max. 65 mm Pressure unit DW 501, motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment for 0-10° bevel of the cutting saw Multi-function milling unit MOT6 – 6 NC control axes, including air blow nozzles Flush trimming 8 mm (15 mm) Radius trimming Chamfer trimming 45° Copy milling unit MOT 6 Multi, corner copying, postforming corners with 6 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end face, vertical edge, working height 60 mm with shelving program, including air blow nozzles Scraping unit MOT6 Multi, including air blow nozzles and chip scraper Surface scraping unit - finishing with pre- and post-scanning, including air blow nozzles Buffing unit for final polishing and edge polishing with 2 textile discs, swiveling 5° Spray device for infeed and outfeed area as well as antistatic agent and lubricant at the pressure unit Infeed area - electronically controlled release agent spray device Before the pressure unit - electronically controlled antistatic spray device After the pressure unit - electronically controlled lubricant spray device Outfeed area - electronically controlled cleaning agent spray device with cleaning agent First delivery 2022, very few running meters, from a craft business Machine is WORKSHOP INSPECTED in TOP CONDITION / Leasing possible Ex works

Condition: used, Holz Her Auriga 1308 XL POWER Compact design - edge thickness 0.4 - 8 mm Motorized bridge adjustment PLC screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and adhesive quantity control, and flushing routine fa.s.t. setting technology "Tool change in position" Long infeed guide with motorized adjustment Pre-milling unit for application before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU adhesive, with sensing nozzle Workpiece height 8-60 mm High-gloss package Pressure unit, pneumatically controlled Trimming unit, pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel of the trimming saw Multi-function milling unit FR301 MOT6, flush trimming 8 mm, radius milling – chamfer milling 15° via NC axes Profile milling unit FF301 MOT1 – rounding of corners up to edge thickness 3 mm or alternatively chamfer = 45°, working height 12 – 60 mm, postforming possible Scraping unit ZK301 MOT4, for chamfers and radii with 2 scraping blade carriers via NC axes Surface scraping unit FK701 with pre- and post-sensing - finishing Fpjdpfx Aie Aitf Uokep Buffing unit - polishing Spray system in the infeed and outfeed area Spray system with lubricant for high-gloss edges Complete DIA tool set included First delivery 2022 Machine in TOP condition, taken out of service - small business Available from stock, Lieboch

Condition: used, Holz Her STREAMER 1057 CNC + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for adjusting the units Pre-milling unit for edge preparation before the gluing process Fully automatic edge magazine for roll and strip material GLU-JET adhesive application station, cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller motorized Trimming unit, pneumatic, for roll and strip material up to 6 mm edge thickness With pneumatic adjustment of the trimming saw angle from 0-10° Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copying unit - 3 mm edge thickness Scraping unit for chamfers and radii with 2 scraping blade holders Surface scraping unit - for finishing Spray device - PU Machine with all processing tools Machine is WORKSHOP TESTED in TOP CONDITION Fjdpfx Ais Aitdtokepp

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 161/1-10, functionality: fully functional, total height: 2,580 mm, total length: 5,500 mm, total width: 1,500 mm, overall weight: 1,500 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 7 1st unit: Pre-milling unit 2nd unit: Gluing unit 3rd unit: Pressure rollers 4th unit: Edge trimming unit 5th unit: Rough milling unit 6th unit: Corner rounding unit 7th unit: Edge planing unit MACHINE DETAILS Voltage: 400 V Current consumption: 38.85 A Fuse rating: 50 A Dimensions & Weight Dimensions (L x W x H): 5,500 x 1,500 x 2,580 mm Weight: 1,500 kg EQUIPMENT Tools: Pre-milling unit Gluing unit Tools: Pressure rollers Tools: Edge trimming unit Tools: Rough milling unit Tools: Corner rounding unit Tools: Edge planing unit CE marking Fpsdpfxoz Ni Rmj Aikjp

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Fedpfxow Nad He Aikjpp Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: used, Year of construction: 2013, Used Machine Year of Manufacture: 2013 Features and Technical Specifications: - Control system with 15-inch touchscreen - Pre-milling unit with 2 milling heads - Edge feeding unit - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensing nozzle - Press unit: pneumatic - Crosscut unit: pneumatic - Diamond cutters (left and right): with CM technology - Corner copying unit with diamond cutters - Surface scraper - Sanding unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Exhaust hoods for trimming unit - Multifunction milling unit: MOT 4 - Vertical feeler rollers: pneumatic - Pneumatic swivel mechanism for MOT 4 milling unit - MOT 2 planing unit with chip collection box - Spray system for the infeed and outfeed areas Fpsdpfezk N Dkjx Aiksp - Minimum workpiece length: 160 mm - Workpiece thickness: 6–60 mm - Edge thickness: 0.4–6 mm - Feed speed: 10 m/min - Overall length: 4930 mm - Weight: 1420 kg

Condition: new, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Exhibition machine- New: GLUJET GJ725 This offer includes an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Joiner milling unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feeder 1903 - Glu Jet GJ725 NC PUR PRO adhesive application system - Press unit 1912-3 pneumatic - Trimming unit 1918 pneumatic 60 mm - Multifunction milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, R 2, left-hand rotation - Diamond cutter Ø 56/60 mm, R 2, right-hand rotation Fpedpfxou R Sy Ae Aikep - Corner copying unit FF301 MOT1 - Scraping blade unit ZK301 MOT4 incl. high-gloss package - Tungsten carbide inserts for scraping blade carrier - Chip collection box for scraping blade unit - Buffing unit 1940 - Spray device TR301 for the infeed and outfeed area - Motorized adjustment of the pressure beam - iTronic adaptive pressure and adhesive quantity control - Infeed fence long 1,252 mm - Motorized adjustment of the infeed fence - Press unit DW301 with motorized NC axis - Extraction hoods for trimming unit 1918 - Shelving program - Surface scraping blade FK701 - Spray device GM301 after the press unit - new exhibition machine -

Condition: new, Year of construction: 2026, 0,4-8 mm Fpedpfx Aiszu A R Sekep Workingpiece thickness from to 8-60 mm Total length 4930 mm Feed speed 10 m/min. Weight 1500 kg

Condition: used, machine/vehicle number: 008494, Position 1: Single Edgebanders HOLZHER-LUMINA + MASTER 5510 Fjdpfjzbxznjx Aikspp Position 2: Panel Return Systems HOLZHER-LUMINA + MASTER 5510

Condition: excellent (used), Year of construction: 2019, I sell the fully equipped edge banding machine Holz-Her Streamer 1057 XL, year 2019: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable Clue scrapers pneumatic adjustable Cleaning brushes top + bottom Cleaning fluid spray front + back Control panel Working thickness adjustment manually Fedezr Rwhepfx Aikspp Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 10m/min. Total length including feeding plate 4200mm Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 2002, for coils and strip material from 0.4 - 15 mm max./min. board thickness 60/6 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication blocking roller for shortest workpiece sequence safety/noise protection hoods central dust extraction connection, D = 160 mm, join milling cutters, D = 120 mm chip collection box, D = 100 mm equipped with: > Join milling cutters 1961 incl. DIA tools > memory-programmable screen control unit SPK 18000 (color screen) > Automatic edge magazine 1901 for coils and strip material > Glue station 1906 for cartridges + granules, including sensing nozzle > Pressing unit 1926, motor-driven > Saw hoods 1918 > Edge trimming unit 1920 Fsdpfjz Abppjx Aikspp > Radius cutter 1929 incl. chip collection box, pneumatic adjustment (separate for top and bottom) > Profile milling unit 1934 for longitudinal processing and corner copying (bottom + front edge) > Profile milling unit 1933 for longitudinal processing and corner copying (top + rear edge) > Flat cutter 1964, controlled by the application > Deburring unit 1944, incl. immersion control > Spraying device 1856 at the infeed and outfeed > Feed rate 12/16 m/min > Motor-driven bridge adjustment > Infeed guide, motor-driven Length 7600 mm Width 1300 mm Height 2000 mm Weight 2800 kg

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass Fjdpezib Nisfx Aikjpp scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Fsdpowv Dfcsfx Aikjpp Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008492, Type of edging: Thin edge, Thick edge Fsdpfxsz S T U Ij Aikspp Gluing System: EVA Hotmelt, PUR, Laser Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Fsdpfevvkfdox Aikepp

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Rated power: 380V, 21A Edge magazine Gluing station 1906 Printing unit 1914 Cross-cutting saw unit 1976 Routing unit for rounding 1943 Rounding cutter blade 1927 Sanding unit 1944 Fpodpfxsiamufo Aiksp Control panel (located) on top Dust extraction nozzle, D = 100 mm Operating manual No quick-change unit for flush trimming

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Fpedeytp Hrepfx Aikop

Condition: good (used), Year of construction: 2023, functionality: fully functional, operating hours: 59,000 h, input voltage: 400 V, input frequency: 60 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, actuation type: electric, total height: 2,000 mm, total length: 3,095 mm, total width: 1,330 mm, overall weight: 700 kg, Equipment: documentation/manual, 2023 Good condition For inquiries, please contact: Gergely Repka 06707739050 Professional edge banding machine suitable for edge sealing and post-processing of panel-format sheet materials. It can be used for particleboard, MDF, furniture board, table tops, etc. Key technical data: * Coil edge banding: 0.4–3 mm * Strip edge banding: 0.4–5 mm Fpsdpfx Aezi Am Njikjp * Maximum edge height: 55 mm * Processable sheet thickness: 8–50 mm * Edge banding cross-section: max. 5 × 50 mm (material-dependent) * Minimum workpiece width: 70 mm * Minimum workpiece length: 180 / 210 mm * Feed speed: 9 m/min * Manually adjustable pressure beam * Extendable workpiece support with 500 mm distance Equipment: * Edge Control BC15 control system with a 15.6" touchscreen * Vi.se. (Visual Setting) digital setting system for quick and accurate machine adjustment * FG101 pre-milling unit with 2 diamond milling heads * MG101 edge feeding unit * Glu Jet GJ101 hybrid adhesive technology (2.3 kW / 50 Hz) with automatic adhesive height adjustment * 1.4 kg adhesive tank (for 4 cartridges) * Glu Jet cleaning tank * Automatic refilling system * DW101 pressing unit * KA101 pneumatic end trimming unit, 1 motor version * 0.22 kW * 12,000 rpm * FR101 profile smoothing unit * chamfering and radius function * 2 × 0.37 kW * 12,000 rpm * 2 replaceable HW milling heads Ø75, Z4, R2 * FF101 corner rounding unit with dual linear guide * ZK101 scraping unit R=2.0 mm * Chip collection system * FK101 surface scraper unit * SW101 polishing unit * 2 × 0.13 kW * 1,400 rpm * 2 textile polishing discs, 120 mm * Adjustable from 0–5° * TR101 spraying unit for infeed and outfeed sides

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Control panel, top Edge feeder 1902 Glue application station 1906 Cutting unit 1902 Printing unit 1816 Cutting assembly 1918 Milling assembly 1942M Rounding draw knife 1929 Form milling assembly 1983 Fpodpfx Aijh Ux Suekop Surface draw knife 1964 Smoothing assembly 1940 Weight approx. 970 kg Compressed air connection, 6 bar Extraction connection, Ø 120 mm Length approx. 5300 mm

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 558/0-112, functionality: fully functional, Weight approx. 1950 kg Control panel 1888 Pre-milling unit 1961 Edge feeder 1901 Sensing nozzle Printing unit 1913 MOT Cutting unit 1918 Milling unit 1942, top Milling unit 1942, top/bottom for rounding Pull blade 1929 Contour milling unit 1983 Surface pull blade 1964 Smoothing unit 1944 Length approx. 5900 mm Fpsdpoh Uyg Esfx Aikep Connected load 21.4 A

Condition: not inspected (used), Year of construction: 2006, for coil and strip material from 0.4 - 15 mm max. panel thickness 60 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication idler roller for shortest workpiece sequence safety/soundproof hoods central dust extraction connection, D = 160 mm, edge trimming units, D = 120 mm chip collection box, D = 100 mm equipped with: > Edge trimming units 1961 incl. DIA cutter > Memory-programmable screen control Edgecontrol > Automatic edge magazine 1901 for coil and strip material > Gluing station 1905 for cartridges + granules incl. sensing nozzle > Pressing unit 1926, motor-driven/pneumatic > Cutting unit 1819, motor-driven Fodpfx Aey Ici Roikjpp > Flush trimming unit 1962 > Multi-function trimming unit 1966 with various radii/chamfers > Multi-radius draw blade unit 1965 with various radii > Corner copying unit 1983, R = 2 mm incl. one interchangeable motor, R = 1 mm > Straight draw blade 1964, controlled by program > Deburring unit 1944, controlled by immersion > Spray device 1856 at the infeed and outfeed > Belt bridge > stepless feed rate up to 24 m/min > Shear arm > motor-driven bridge adjustment > infeed guide rail, motor-driven adjustable Length 8200 mm Width 1300 mm Height 2000 mm Weight 3300 kg

Condition: excellent (used), Year of construction: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edging. Suitable for furniture, panel materials, custom manufacturing, kitchens, bathroom furniture, joineries, and much more – complies with CE standards. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue pot height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine Features: Automatic feed for roll and strip material Cartridge glue system enables in-operation switching between EVA and PUR adhesives or changing glue color Fpodpfx Aioy Emw Hokop 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer trimming, with 2 motors at 0.6 kW each Surface scraper unit Radius scraper unit Buffing unit Soundproof hood Control: Rotatable and tiltable operator panel All units individually controllable Function display with text and graphics Aggregate pre-selection display Program list with names and numbers, self-diagnosis Approximate machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used machine information: • Technical data subject to change and prior sale. • Prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece width (max.): 65 mm, workpiece length (max.): 250 mm, feed rate X-axis: 10 m/min, overall weight: 1,200 kg, TECHNICAL DETAILS Edge band thickness min.: 3 mm Edge band thickness max.: 6 mm Panel thickness min.: 6 mm Panel thickness max.: 45 mm Panel width min.: 65 mm Panel width max.: 65 mm Panel length min.: 160 mm Panel length max.: 250 mm Feed speed min.: 10 m/min Feed speed max.: 10 m/min MACHINE SPECIFICATIONS Dimensions & Weight Dimensions (L x W x H): 4,630 x 1,600 x 1,770 mm Weight: 1,200 kg Number of transport packages: 1 piece Voltage: 400 V Fpjdpfx Aex Rbm Heikop Power consumption: 29.37 A Fuse protection: 35 A EQUIPMENT Pre-milling unit - Type: FG 201 - tools included Glue application unit - Type: 1903 Pressure rollers - Type: 1812 - tools included End trimming unit - Type: 1918 - tools included Rough trimming unit - Type: FR201 - tools included Corner rounding unit - Type: 1832 - tools included Radius scraping unit - Type: 1964 - tools included

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Equipment: - platen - pre-milling - strip feeder - 2 glue tanks: for granules and cartridges - hot melt glue (granules) currently in the machine - guillotine – pre-trimming of the veneer - 3 pressure rollers - 2 trimming units with saws for final trimming - 2 milling units for edge profiling (radius milling cutters) - corner rounding unit - edge sanding units – for removing excess glue - polishing units - stepless feed speed adjustment 8-18mm - workpiece thickness 6-45mm Fpedpfszw Dx Asx Aikep - min workpiece length 180mm - min workpiece width 600mm - max thickness of veneer fed from a roll 3mm - air consumption 6-8 bar - diameter of dust extraction nozzle 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES - German production - spray system - pre-milling and corner rounding - 2 glue tanks - 4 additional milling cutters included - unpainted - original technical documentation + CE - very good condition - used veneer edging machine Net price: 49900 PLN Net price: 11605 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)