Used Hole Punching Machine for sale (65,889)

Condition: used, Hydraulic punching machine, punching frame for use with JOKA HP-S punching units Hydraulic hole punching machine, hydraulic press for punching tools Year of manufacture approx. 1995 Pressure capacity: 5 tons Ncedpfx Aeltrmuoiyeu Stroke: 155 mm Stroke length: approx. 20 mm Punching unit width: max. 54 mm Punching unit height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Mains connection: 230 volts, 50 Hz - for universal use with JOKA SW 20 or SWD 20 punching units - The outreach of the punching units can be larger and can be pushed back - Stroke activation via electric two-hand operation - Hydraulic unit HAWE, type HCW 4 / 2.5-B 1/400-1 - mounted on a frame base, mobile Space requirement L x W x H: 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display Nodoi Db Ibspfx Aiyecu - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: like new (used), Year of construction: 2012, AGIECHARMILLES drilling EDM machine, model DRILL 20, manufactured in 2012. Travel: X 300, Y 200, Z 300. Ncjdpfxozd D Rre Aiyju Maximum drilling depth: 200 mm. Table: 400 x 300 mm. CNC unit with 12" TFT touchscreen. Sequences drilling points until the electrode is used up. Maximum workpiece weight: 300 kg. 30A generator. Electrode diameter: 0.1 - 3.0 mm. Dielectric pump pressure: 70 bars. Dielectric tank capacity: 16 liters.

Condition: like new (used), Year of construction: 2012, operating hours: 47 h, MACHINE WITH ONLY 47 working hours. Tested by ERMAKSAN FRANCE. COMPLETE DATA CAN BE FOUND IN DOCUMENTS FANUC CONTROL Nodorcb Hqepfx Aiyecu

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Ncedpfxsu Hxmzs Aiyju

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Ncsdpsy Dgrnefx Aiyou Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: like new (used), Year of construction: 2017, HYDRAULIC PUNCHING MACHINE FICEP MOD. SP 40 Good used in excellent conditions cCE. Power exerted: Ton 40 Maximum punching diameter on thickness: mm 32 x 10. Recess: mm 510 Working height: mm 955 Stroke length (punch) from 0 up to mm 40 Net weight: kg 860 Dimensions: mm 1365 x 665 x 1700 (h) Motor power kw 4. Large hole device up to diameter 46mm included in the supply. Ncjdowm Emvepfx Aiyju

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Trumpf TruPunch 2020 Nodpfx Asy S Adpoiyscu

Year of construction: 2007, condition: excellent (used), functionality: fully functional, IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS: 1250 mm CROSS AXIS (MILLING QUILL): 380 mm Ncjdpoyft Hasfx Aiyeu CROSS TRAVEL OF HEAD: 500 mm VERTICAL TRAVEL: 1000 mm ROTARY TABLE SIZE: 1000x800 mm TOTAL MACHINE WEIGHT: 20,000 kg

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 The positioning table is unfortunately defective; otherwise, the machine is in good used condition. Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm Nedpfxewrkcys Aiyocu or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Projection                     750 with -Foot switch

Condition: used, Year of construction: 1981, machine/vehicle number: 800 02 81 46, type of input current: three-phase, Specialized EDM drill (eroding machine / hole starter EDM machine) Ncsdsy Su Iyopfx Aiyeu This machine is primarily used in metalworking as a hole starting EDM machine or for spark eroding the removal of broken tools (such as taps, drills, or reamers) from valuable workpieces. This is done with extreme precision without damaging the surrounding thread or material.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Table 3050 x 1550 mm Pressing force 220 kN Max. workpiece weight 280 kg Sinumerik 840 D Machine weight 17 t Axes: Ncjdpfxjzcd Hrs Aiyju X ... 6500 mm Y ... 310 mm Z ... 170 mm A1 ... n x 360 A2 ... n x 360

Condition: excellent (used), Number of agregats 1 St. Njdpeyvkt Tjfx Aiyocu Motor output 0,37 kW connected load frequency 230 V Lock width 6x6 mm Rectangular drilling machine or mortising machine Scheppach type St 12 for drilling or mortising rectangular holes for doors, windows or similar applications.

Condition: excellent (used), Number of agregats 1 St. Lock depth max. ca. 130 mm Nedpfx Aoyi Hufoiyjcu connected load 2,5 kW vertical movement 100 mm

Condition: used, boring spindle 21 dividing 32 mm hollow max. 1.000 mm Ncsdpjwp E Uxefx Aiyeu swivable pneumatisch °

Condition: used, Blade 40 x 150 mm Chain width ca. 18-15 mm engine 1,6 kW Nedpfx Aielfdx Royjcu

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Nodpfjza E S Djx Aiyecu

Condition: good (used), functionality: fully functional, Year of construction: 2013, AVAILABLE FROM October 2026 Punching force: 220 kN Laser power in watts: 4000 Travel range - x: 2500 mm Travel range - y: 1250 mm Cutting capacity in structural steel: 8 mm Cutting capacity in stainless steel: 8 mm Cutting capacity in aluminum: 6 mm Workpiece weight: 280 kg Machine weight approx.: 24,000 kg Dimensions: 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Traveling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Ncsdpjy Tm Dpefx Aiyju etc.

Condition: used, Year of construction: 2006, punching force: 30 t, overall weight: 18,000 kg, For sale is a Finn-Power LP 6 combined punching and laser cutting machine, manufactured in 2006. The machine is currently powered and ready for operation. An on-site inspection can be arranged at any time by appointment. We would be happy to demonstrate the machine in operation so that you can see its technical condition and functionality for yourself. The Finn-Power LP 6 combines punching and laser technology in one machine and is ideally suited for the efficient processing of sheet metal parts with high flexibility and productivity. The laser combination requires cleaning of the beam deflection mirrors; the laser source is operating cleanly. Manufacturer: Finn-Power Model: LP 6 Tool stations: 21 Year of manufacture: 2006 Siemens Sinumerik 840D control system CO₂ laser 2.5 kW Hydraulic punching technology with 300 kN punching force Multi-tool system Forming functions Automatic clamping positioning CE-compliant safety equipment Ncsdpfxjzb Rr Ee Aiyju Cooling system Extraction system Part conveyor belt Machine is powered Inspection and demonstration possible Immediately available upon agreement For further information, technical data or to arrange an inspection, please do not hesitate to contact us. Available from week 30.

Condition: used, Year of construction: 1993, sheet width 1550 mm plate length 2525 mm plate thickness 6,4 mm Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih no. of strokes 200 / 400 Hub/min Ncedpfx Aisvh Ndpeysu control MNC 32000 ATC 22 Pos total power requirement 7,5 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection Nedpfxsy Saqge Aiyscu - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time Ncsdpoy Sappjfx Aiyou - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers Ncodpfxsy Sat Us Aiysu - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function Ncjdpoy Saqmofx Aiyju + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 44,287 hours Control system: Bosch PNC-P Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety - CE Marking - Multi-Beam Light Barriers - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function Ncjdpfx Aiey Sathjyeu + Thread Forming Function + Marking/Fast Beading Function + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection