Used Hole Punching Machine for sale (65,905)

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. Fedpfxszw I Hqe An Ejgi ATTENTION!! This offer includes only the engine and transmission!

Condition: used, Tube end forming machine,Spiro Pneumatic Tube Notching Machine / Assembly Stand, Spiro Manual Tube Notching Machine, Used Machine Technical Specifications Manufacturer: Spiro Development AB (Made in Sweden) Fsdpfjzwxwgex An Eegi Year of Manufacture: 2008 Type: Manual Tube Notching Machine (with pneumatic assistance) Frame Construction: Heavy-duty aluminium machine-building profile frame Operation: Foot-switch-controlled pneumatic operation Design: Adjustable-height and adjustable-distance tube support stand for convenient positioning and machining of long tubes Overall Dimensions Width: 2350 mm Depth: 930 mm Height: 1450 mm

Condition: used, Year of construction: 1997, Used machine Year of manufacture 1997 Universal dowel drilling machine with drilling from below heavy cast-iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any mitre angle drilling unit with digital positioning for zero-edge transfer, touch stops are used which, during horizontal drilling, transfer the tool thickness to the vertical drilling for row-hole drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal clearance max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles, pitch 32 mm Spindle spacing min. 32 mm Spindle spacing max. 640 mm Space required L x W x H 960 x 630 x 1140 mm Weight approx. 300 kg Availability: at short notice Storage location: Flörsheim Fjdpfx Anozlbqfo Ejgi

Condition: used, Year of construction: 2008, Working hours machine: 120266 h Fgedpfez R Ri Ijx An Esi Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min Standard configuration - Patented servo-electric double drive- Punching force 300 kN - low energy consumption of the punching unit (maximum 7 kW, 1 kW in stand-by mode) - smooth-running, low-noise, low-wear and almost maintenance-free   - 780 punching strokes per minute - Optimum use of sheet metal - Punch & Forming for forming up to 20 mm in height - Multiple thread unit with four inserts from M 2.5 to M 6 - brush table for scratch-free processing Extended machine accessories - Z-revolver with 45 turrets (2 x B Station Auto Index / 2 x C Station Auto Index)- punch & forming- tapping Automation - does not include the loading unit shown in the picture

Condition: good (used), Year of construction: 1991, Tool press MOSSINI 680800, manufactured in 1991, pressing force 800 t, stroke 21 mm, stroke time 128 ms, with various accessories and tools. Fgsdpsz Icdvsfx An Eji

Year of construction: 2001, condition: used, functionality: fully functional, Bobst Autoplatine SP 104-ER (2001) Automatic die-cutting machine for paper and cardboard converting, processing sheets up to 1,040 x 740 mm at up to 8,000 sheets per hour. The machine is fully equipped with a waste stripping station and a blank stack delivery station with automatic non-stop operation and a pallet changing device. Operation is controlled via the Bobst C.U.B.E. control system, with an additional panel at the feeder, supported by Bernoulli sheet braking at the stripping and delivery stations. Equipment ### Machine Platform with safety barrier Centerline system for quick job changeovers Electronic sheet travel control Adjustable centering at stripping and delivery stations Control cabinet cooling unit Gripper bars Bobst C.U.B.E. electronic machine operating system Additional C.U.B.E. control panel at the feeder Bernoulli sheet braking device at the stripping station Bernoulli sheet braking device at the delivery station Motor with frequency converter control ### Feeder Pile tray with handle for lateral adjustment during production Pile height adjustment with front photocell Rear pile guides (OS and OOS) Side blowers adjustable with Centerline marks Suction unit with multiple adjustments Vertical adjustment of the suction head Automatic lateral pile correction Manual non-stop device Synchronization of sheet arrival against the front lays Safety system for lowering the pile tray ### Feed Table Anti-static stainless steel plate Sheet synchronization with machine stopped 4 front lays, adjustable in pairs, with front register control Pull guide (OS) with side register control Pull guide (OOS) with side register control Double sheet detector Feed belt slow-down device Support plates at platen entry Sheet hold-down device Upper frame with manual lifting device Upper transport for paper, paperboard, and corrugated board up to 4 mm 4 laterally guided transport belts ### Platen Press Gripper reopening device Die cutting without gripper margin Equipment centering and locking Locking of the chase against the upper beam Cutting force measurement with strain gauge Synthetic supporting plate, 22.5 mm 3x upper chase with quick locking, fixed bottom plate Compensating plate, 4 mm ground steel Fsdpfo Afv Szjx An Ejgi Adjustable supporting plate centering, ±0.9 mm Lowering of the chain guides ### Technical Details Production Rate: 8,000 sheets/hour Max Sheet Size: 1,040 x 740 mm Min Sheet Size: 400 x 350 mm Max Die-Cutting Size (with gripper margin): 1,040 x 725 mm Max Cutting Die Size: 1,050 x 746 mm Convertible Stock: Paper from 80 g/m², board up to 2,000 g/m², corrugated up to 4 mm Max Platen Pressure: 2.5 MN (250 t) Max Pile Height: Feeder 1,815 mm (non-stop 1,515 mm), delivery 1,430 mm Max Pallet Size: 1,200 x 800 mm ### Net Weight 20,000 kg ### Electricity Main motor 11 kW, total connected load max. 25 kVA ### Note The buyer is responsible for disassembly; no tools are provided. Still connected to power.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0165091297780, Offer 26265 Hydraulic flat bar and round bar shear with notching device and hole punch Technical data: - Flat bar shear, cuts up to 240 x 13 mm - Angle bar shear Fjdpfx Aoz Ndxujn Esgi - Cuts L-shaped steel at 90° up to 100 x 10 mm - Cuts L-shaped steel at 45° up to 70 x 8 mm - Round bar shear - Cuts round steel up to 35 mm - Cuts square steel up to 32 mm - Notching device with square notching device - Hole punch - Punching force 600 kN - Reach 220 mm - Punches holes in steel up to 30 mm Ø in 15 mm - Punches holes in steel up to 24 mm Ø in 20 mm - Various punching tools and dies - Electrical equipment – foot pedal - Drive 400 V / 4 kW - Space requirement approx. W 540 x H 1800 x D 920 mm - Weight approx. 1200 kg

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Fgjdpfx Aexnlflen Eji

Condition: used, functionality: fully functional, Dubus multi-spindle drilling machine. Full specifications coming soon. Fgsdpfx Anjz Irn Re Eoi

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, overall weight: 650 kg, pressing force: 20 t, | Technical Data | Value | | Drive | Hydraulic | | Motor Power | 5.5 kW | | Maximum Punching Force | 200 kN (approx. 20 tons) | | Maximum Punching Stroke | 80 mm | | Stroke Adjustment | Adjustable via scale | Fgjdoz Ihn Tepfx An Eoi | Stroke Rate | Up to 20 double strokes/min | | Operation | Foot pedal |

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 86053, total width: 1,950 mm, total length: 4,000 mm, total height: 1,800 mm, overall weight: 7,500 kg, type of input current: three-phase, input voltage: 380 V, working range: 48 mm, power: 9.56 kW (13.00 HP), control voltage: 24 V, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 350 mm, paper width (max.): 910 mm, paper height (min.): 290 mm, paper height (max.): 670 mm, Equipment: documentation/manual, lighting, Refurbished high quality flatbed die cutting machine from Italy with Spiess insert with steel insert plate with lateral adjustment, a left and right pull attachment (Spiess), double sheet detection, moving upper platen (WUPA system or Kama) with central pressure adjustment as with KAMA, but with the conventional intermittent pull gripper bar system with closing upper grippers. In other words: the sheet moves almost in a straight path through the machine; that is why this machine is ideally suited for lighter paper and cardboard types and is definitely an excellent intermediate step between a Heidelberg SBD and a medium format 40" die-cutting machine from Bobst, for example. No break-out, sheets are laid out directly on the pallet output after die-cutting. The output contains forks to place small format pallets on. Guaranteed pressure force is 200 tons. Stroke of the moving upper platen is 48 mm. Fgjdpfev Nwwaex An Eji Hardened die-cutting plate and device plate. This machine has hardly been used and is in excellent condition, however we have made modifications to further increase the ergonomics and operational reliability. Can be tested at our company and can be delivered with installation and warranty. The asking price is based on this. For all information in various languages, please open the PDF containing the original folder with explanation and specifications. Some specs: Maximum paper-cardboard size 67 x 91 cm Minimum paper-cardboard size 29 x 35 cm Gripper margin 6 to 14 mm Minimum paper weight approx. 80 -100 grs Maximum cardboard thickness 3 mm or 1.5 mm solid cardboard Stroke of the upper platen 48 mm Maximum rotation speed 4500 per hour Minimum rotation speed 1500 per hour Pressure force 200 tons Total power consumption incl. 80 m3 air pump 10 kW (13Hp) Total weight 7,500 kg The die-cutting section is transported separately from the Spiess insert and must be assembled. The electrical switch cabinet is fully plugged in with the components.

Condition: excellent (used), functionality: fully functional, overall weight: 400 kg, We sell directly. Make-Ready Table for Bobst 106 E/ER We offer a professional table for the pre-preparation and alignment of die-cutting tools, as well as a cleaning section located outside the die-cutting machine. This device reduces the machine setup time (make-ready) of the Bobst machine by up to 30-40%. Technical data and specifications: Fsdpfx Anozuwazs Eogi Compatibility: BOBST 106 E /ER (SP / Novacut / Visioncut / SPeria series) Working format: Max. sheet format 1060 x 760 mm. Basing system: Fully compatible with the Centerline II system (fast and precise tool centering) Construction: Stable, steel frame with an ergonomic work surface and shelves for accessories/frames Included equipment: Basing strips and millimeter scales Clamping system Additional elements - additional frames (without the tools visible in the pictures, i.e., pins and telescopes) Technical condition: Condition: Excellent, 100% technically sound, locking mechanisms operate smoothly. Location of the device: Dąbrówka / Poznań, Poland Logistics and delivery Delivery terms: EXW (self-collection by the Buyer) / Possibility of arranging transport at the Buyer's expense. Availability: Immediate (the table is secured and ready for loading).

Condition: used, Second-hand machine Features and technical specifications: - Universal dowel drilling machine for horizontal and vertical drilling Fjdpezk N Atefx An Eogi - Working width 720 mm - with drilling beam, drive motor 3 PS, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm - with chassis Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 745-006-1, total height: 4,050 mm, ram adjustment: 60 mm, total width: 1,650 mm, total length: 3,000 mm, drop-through hole in table: 160 mm, pressing force: 100 t, distance between side stands: 420 mm, overall weight: 16,000 kg, DGUV certified until: 10/2027, year of last overhaul: 2014, Raster die-cutting machine Stroke rate: 20 - 220 Table area: 700 x 1000 Stroke adjustment: 20 - 90 mm Unidor Compact Press Raster roller feed, hydraulic CE 2014 – complete system Weight approx. 16,000 kg Accessories: Fgsdoz Ekvuspfx An Eei Kemmerich strip feeding system Safety fence

Condition: ready for operation (used), Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment. Fsdpfx Ajyzr Hlsn Eegi

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - Universal dowel drilling machine with a swiveling drilling unit - With fully automatic control - With 2 safety pneumatic clamps - Drilling gear motor: 2.2 kW with 21 spindles - Spindle pitch: 32 mm - With integrated oil damping - Height adjustment: 80 mm - Drilling depth: 80 mm Weight: 420 kg Availability: available shortly Fgedpfxezk N A Tj An Eoi Location: Röllbach

Condition: good (used), Year of construction: 2006, machine/vehicle number: 06202305, functionality: fully functional, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine - Die-cutting units - Reel to sheet Fgedpfx Aew Ec U Ijn Eei - Fanfold - Magnetic stripes - Air shock web width 360 mm

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Fodsy Nnakjpfx An Esgi

Condition: ready for operation (used), Year of construction: 1999, Euromac hydraulic punching machine Type CX1000/30/2000 Capacity 30ton Y-axis reach 1000mm Fedpfx Ajpmt Ttsn Esgi X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin 6-fold multitool + with 6-fold die holder

Condition: good (used), functionality: fully functional, drilling depth: 600 mm, workpiece weight (max.): 2,000 kg, travel distance X-axis: 750 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 3,000 rpm, drill diameter: 35 mm, drill spindle length: 600 mm, spindle mount: MK 2, spindle stroke: 600 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, Driling capacity: Ø 35 mm Driling depth: 600 mm X-axis: 750 mm Y-axis: 630 mm Z-axis: 300 mm Fodpszu Sp Rofx An Esgi Spindle speeds: 0 - 3000 rpm Tabel size: 1100 x 650 mm Load on table: 2000 kg max Turning table: 360° Controller: Degen AE30 Including: - Cabinet + pallet with drills - Coolingunit - Machine manuals Country of origin: Germany Motor power: 11,2 kVA Machine LxWxH: 350 x 120 x 175 cm Machine weight: 1300 kg

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Availability: short term Fgodpfxow I Unwj An Eji Location: Röllbach

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Fgjdpjza E S Defx An Eoi

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm Fsdpfew I Um Hjx An Ejgi with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Fjdpfx Aezfaaljn Esgi

Condition: used, functionality: fully functional, The complete specifications will be available soon. Fedpfxez Irlcs An Esgi