Used Dowel Hole Drilling Machine for sale (66,303)

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Storage location: Nattheim Ncsdpfx Aowkir Djgwep

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. Ncjdpfxjxnlfle Agwop - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Njdpfx Agjxc Hi Uswocp Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, Year of construction: 1989, with many drills used, top condition Machine cleaned, partially overhauled, lubricated, made operational, test run performed. Make: Hoffmann Nsdpfx Aevyurcsgwocp Type: DB 23 Year of manufacture: 1989 Machine no.: 169 Number of spindles: 23 units Number of boring beams: 1 Spindle pitch / grid: 32 mm Drilling from below, stroke: 60 mm Stop rulers with central adjustment Working width: 704 mm (1080 mm with portal clearance) Drilling depth: 70 mm horizontal Drill holder: M 10 / Taper 30° Space requirement approx. 1300 mm x 1000 mm x 1300 mm Weight: approx. 500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee.

Condition: used, boring spindle 21 dividing 32 mm hollow max. 1.000 mm Ncodpfx Agjwp E Uxjwep swivable pneumatisch °

Condition: used, Working width 720 mm Nodpfxelfcn Eo Agwecp hollow max. 820 mm bore depth horizontal 120 mm boring depth: vertikal 45 mm

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: Ncjdsxdttispfx Agwsp - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Year of construction: 1979, from school operationused, good conditionmake Ayentype DB 1000 K 23year of construction 1979machine no. 7SA740GS-testednumber of spindles 23 piecesnumber of drilling beams 1spindle distance / grid 32 mmdrilling from aboveswiveling pneumatichole line drilling devicestorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Ncjdpfx Aovxr Rasgwep

Condition: used, usedmanufactured by Gannertype Superdrillnumber of spindles 19 piecespindle distance / grid 32 mmhydraulic feeder brakeguide fences 2 piece length ca. 3,0 m / 1,5 mworking width 640 mmdrilling depth 95 mm / 110 mmdrill chuck D 10 mmpendulum fence 6 piececlamp 3 piecedrilling unitframe dowel unitrequired space ca. 1400 mm x 900 mm x 1200 mmtotal connected power 1,5 kWlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revisionwithout guarantee and warranty Nodpfx Agsvwf R Rewjcp

Condition: used, Year of construction: 1983, with 2 drilling beamused, good conditionmanufactured by Scheertype DB 3built in 1983Masch.-No. 83120number of spindles 25 piecenumber of drilling beams 2Spindelabstand / grid 32 mmdrilling from tophydraulic feeder brake 2 pieceguide fence 1 piece ca. 2500 mmworking width ca. 800 mm (768mm)drilling depth ca. 100 strokedrill chuck M 10pendulum fence 3 piececlamp 3 piecedrilling programs 4 piecerequired space ca. 1400 mm x 1300 mm x 1800 mmweight ca. 1000 kglocated in 97447 Gerolzhofen, free on truck, unverpacktsale in current condition as seen,without revision,without guarantee and Gewährleistung Nedovwf N Hopfx Agwecp

Condition: used, Year of construction: 1980, second hand Make Scheer Type DB 5 Year of construction 1980 Machine no. 508054 Number of spindles 21 pieces Number of drilling beams 1 drilling from below pivoted manually Working width 800 mm Drilling depth 80 mm Tensioner 2 pieces Pitch 32mm Space requirement approx. LxWxH mm 1200x800x1300 Weight approx. 300 kg Total connection value 2.2 kW Njdpfsvwfuvjx Agwscp Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic comb lowering pneumatic drill chuck D 10 mm clamp 3 piece grid 32 mm required space ca. l x w x h mm 1200 x 800 x 1600 Njdpfxovwgags Agwocp weight ca. 370 kg total connected power 2,2  kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2800x1100x2200 mm Weight 1100 kg Total power requirement 8,8 kw Ncodpfx Agevz Hwaewsp Horizontal and vertical drilling machine MULTI MZ3x8 - Max. Center Distance Between Holes 2440(L)mm x 300(W) mm- Min. Center Distance Between Holes 220(L)mm x 32(W) mm - cess length 2440 mm - cess length 220 mm - Plate thickness 12~40 mm - Total number of drilling bit 32pcs - Horizontal backside drilling rows 4 rows - Max. drilling dia. 35 mm(Single bit) and 13 mm (Multi)- Max. drilling depth 50 mm - Dia. of drilling bit shaft 10 mm - Length of drilling bit 57 mm/70 mm - Drilling bit speed 2840 rpm - Qty of horizontal L&R drilling rows 2 rows - Qty of vertical up drilling rows 2 rows - Air pressure 0.5~0.6 Mpa - Total power 8.8 kw - Net weight 1100 kg - Overall dimension 2800 x 1100 x 2200 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x1050x110 mm Weight 350 kg Ncodpfx Agevz Er Aswop Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1100x1350 mm Weight 500 kg Ncodpfjvz Eizex Agwop Total power requirement 3,5 kw

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Nedpfx Aswv Nb Nogwjcp Power consumption: 2.2 kW Drilling unit: swivelling

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 pcsPitch: 32 mmDrill chuck: Clamping surface of drill shank: 10 mmOperation: foot pedalTools included: yesDrilling direction: from below & end faceTilting: manualTilting angle: only 0° or 90°Max. pass-through height: 80 mmMax. pass-through width: 750 mmNumber of material clamps: 3 pcsType of material clamping: pneumaticDesign: stationaryStop system: only for structural seriesWeight approx.: 400 kgMotor power: 1.5 kWDust extraction diameter: 120 mmStorage location: with customer Nedpeihghrefx Agwjcp

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1320x1220x1400 mm Weight 275 kg Total power requirement 1,5 kw Nsdjvz Eibjpfx Agwocp

Year of construction: 1980, condition: ready for operation (used), Ayen Type DB 1000 K 23 Year of manufacture 1980 GS-tested Ncodpfx Agopgkqpowjp number of spindles 23 pieces number of drilling beams 1 spindle distance / grid 32 mm drilling from above swiveling pneumatic Hole line drilling device

Condition: used, Year of construction: 2007, Machine for drilling holes for dowels URBAN DB 3100, year 2007 Condition: very good - Profile clamping system and drill feed operated by foot switch - Electric drilling motor switches off automatically at the end of the drilling process - Drill feed speed and drilling depth individually adjustable - Quick-clamp chuck for standard drill bits up to max. Ø13mm Ncjdjwinq Nepfx Agwop - Left and right support tables

Year of construction: 2013, condition: excellent (used), Technidrill 'GD-100-5-160 BTA-Ejector-Gundrill' Deep Hole Drilling Machine with Heidenhain 320 CNC Control (2013) Ncedpfx Aoyw Tgxjgwep 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012); S/No. 7351-03/13. Automatic Steady; Schunk Approx 300mm Capacity Hydraulic Clamp; Allen Bradley Safe 4 Receiver Guard Shield; 480 Volt Power Supply, 3-Phase; Lista Steel 5-Drawer Cabinet (700mm x 720mm x 900mm High) with Assorted Guides, Steady Rests & Assorted Gun Drills

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, travel distance W-axis: 350 mm, rotational speed (max.): 300 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding is binding and requires collection within the specified period: 04.05.26 to 07.05.26. Ncjdsyr H Ttjpfx Agwsp TECHNICAL DETAILS Maximum workpiece dimensions (L x W x H): 840 x 460 x 350 mm Maximum workpiece weight: 150 kg Worktable dimensions: 600 x 300 mm Travel range X-axis: 350 mm Travel range Y-axis: 250 mm Travel range Z-axis: 350 mm Travel range W-axis: 350 mm Rotational speed C-axis: 300 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,200 x 2,200 mm Machine weight: 2,000 kg External reference: Lot 12

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Dowel insertion tool for 8 x 40 mm dowels The following issues were identified during testing: Ncedsytq R Eepfx Agwep - Glue specification missing - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field - SPS module Beckhoff repeatedly fails. Machine must then be restarted. - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Ncjdpfxsxwaz Hj Agwsp

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter Ncodpfxewkba Hs Agwjp - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach