Used Pneumatic Punching Machine for sale (68,205)

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Ksdpeh U Dtujfx Aaljww Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Pressing force 2.6 tons at 5 bar Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Ksdpfew A Srwex Aalsww Total stroke 56 mm Ram surface Ø 100 mm Tool holder Ø 12 mm Maximum installation height 180 mm Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Year of construction: 2013, condition: excellent (used), Punching force 80 kN working stroke 40 mm installation height 140 mm throat 110 mm Kwjdpfx Ajlmk Uyoalew Working pressure 10 bar Space requirement L x W x H 0.9 x 0.9 x 1.4 m Weight 250 kg Operating instructions

Condition: used, Punching machine Ksdpsxlr Nrjfx Aaleww Bograma Description: - Standard equipped

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Kwsdpfx Ajyn Nybealow Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: excellent (used), Year of construction: 2000, Used Trumpf Trumatic 200r CNC punch press for sale: Brand: TRUMPF Model: TRUMATIC 200 Kjdpfx Ajvq N Ndjaljww Year: 2000 Type: CNC Punching Machine Control:Bosch CC 220 Punching force (ton) 16.5 Movement X-axis (mm) 80 m/min Movement Y-axis (mm) 55 m/min Simultaneous positioning speed (X+Y m/min) 97 m/min Max. sheet thickness (mm) 6.4 Tool changing time (sec.) 1.5-6.5 s Number of tool places 15 Max. hole diameter (mm) 76.2Max. workpiece weight (kg) 150 Max. stroke rate (1/min) 420 Picture of punch samples: 6mm aluminium

Condition: excellent (used), Year of construction: 2001, Used High Quality, Very Clean and Fully Serviced Large Format Amada Vipros King 368 Cnc Punch Press For Sale Complete With 1600 Throat To Process 3metre x 1.5metre Sheet Metal year 2001 price POA specification 30 TONS CAPACITY 58 STATION 4 AUTO-INDEX HYDRAULIC CNC PUNCH PRESS COMPLETE WITH LKI MP3000 LOAD -UNLOAD MANILPULATOR description CAPACITY 30 TONS Kwsdpfxer D R Ruo Aaljw TYPE BRIDGE FRAME SERVO CONTROLLED HYDRAULIC RAM BRIDGE FRAME SERVO CONTROLLED HYDRAULIC RAM CONTROL FANUC 18P MAX AXIS TRAVEL 1525 X 2000 MAX SHEET SIZE 1525 X 4000 MAX SHEET THICKNESS 3.2MM 58 STATIONS THICK (H) 24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 1 x 88.9 mm AUTO-INDEX STATIONS 2 X 31.7mm 2 X 114.9mm MAX SHEET WEIGHT 150 KG 120 KG AT MAX SPEED MAX HIT RATE 860 STROKES PER/MIN POWER AND AIR REQUIRED 30 KVA 400V +/- 10%50 Hz AIR 5.0 kgf/cm/2 AIR FLOW 250 L/MIN COOLING WATER FLOW Min 40 1/min WEIGHT 14000kg SERIAL NO. MAX SHEET SIZE 3000mm X 1500mm MIN SHEET SIZE 1000 MM X 300mm SHEET THICKNESS RANGE 0.5mm – 6.0mm MAX LIFT CAPACITY 170 KG WITH DOUBLE SHEET DETECTION MAX PALLET LOAD 3000KG POWERAND AIR REQUIRED 10 KVE AIR 6 BAR FLOW RATE 650L/MIN

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 30,001,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Kwsdpexrnggsfx Aaljw Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Large throat 1600 Complete with multi tool capability Type S11 Video available upon request

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE Kodpfx Ajtltl Hoaljww CAPACITY: 220KN SERIAL YEAR: 1999

Condition: new, Year of construction: 2024, TP turret punch presses With Durma TP series punch presses, you can achieve top quality with precise and fast turret, improved hydraulics and 3 automatic index stations. With movable platen, part unloader, automatic clamps, Cad/Cam software and control unit, Durma turret punch presses are easy to use. With automation systems that increase both work safety and productivity, user safety is also increased while reducing wasted time. Punching force: 30 tons Kwsdpfsg Admfjx Aaljw Working area: 3.000+R x 1.500 mm X-axis movement: 3.000+R mm (repositioning) Y-axis movement: 1.500 mm Y-axis speed: 60 m/min X-axis speed: 70 m/min speed combined X+Y: 92 m/min max. stroke rate (in 1 mm steps, 1 mm sheet thickness): 1,100 1/min max. stroke rate (in 25 mm steps, 1 mm sheet thickness): 325 1/min max. marking speed: 1.200 1/min. main cylinder stroke: 40 mm max. punching stroke: 25 mm max. cutting capacity with fixed tool station steel: 6 mm max. cutting capacity with fixed tool station NiRo: 3 mm max. cutting capacity with index station Stah: 3 mm max. cutting capacity with index station NiRo: 1,5 mm Tool changer (27 stations without tool and holder): 11 x A-station fix: 0,8-12,7 mm 11 x B-station fix: 12,8 - 31,7 mm 2 x C-station fixed: 31.8 - 50.8 mm 1 x D station fixed: 50.9 - 88.9 mm 3 x D-station index: 50.9 - 88.9 mm Positioning accuracy: +/- 0.1 mm Repeating accuracy: +

Year of construction: 1983, condition: used, machine/vehicle number: 1338-5, pression power: 30 t table siize: 500 x 700 mm stroke: 50 mm Kwjdpfx Ao N Hcgjalow tappet boring: 40 mm breakdown hole in table: 100 mm total capacity needed: 380 V, 11 kW weight: 2000 kg space needed: 1000 x 2300 x 2170 mm

Condition: used, functionality: unexamined, Year of construction: 1986, machine/vehicle number: 1233, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, punching force: 20 t, type of input current: three-phase, Equipment: foot remote control, Used punching machine with a selection of diameters for round and square holes. Both the large and small punching machines, as well as the cabinet, are included. Each punching machine can be operated independently via foot pedal. Kwjdpfeyu Hqqsx Aalow

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Kodpeyvvkwofx Aaloww Weight 430 kg In very good condition

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Kwodpfx Aox U Eiajaljw Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Euromac horizontal bending machine Digibend 160 160 tons press force with tools Kwjdpfx Aeyrntzsaljw

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Ksdoudn Utspfx Aaleww Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Ksdpfeykt N Sex Aaloww Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement Ksdpfx Aasxf Utaeljww - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: good (used), Year of construction: 2011, operating hours: 87,995 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Machine - Working area 3000 x 1500 mm - Rigid, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear magazine with 18 tool stations incl. 3 clamps - Drives with maintenance-free three-phase motors - Repositioning device with programmable hold-down - Ball tables - Part chute 500 x 500 mm - Good parts bin - Chip container - Automatic shut-off - Initial oil fill - Transport and installation device Punching head - Hydraulic punching head - Rotatable mono tool holder - Manually adjustable hold-down force - Programmable hold-down - Tool length compensation - Punch pin spray lubrication - Slug extraction - Forming Control - Open control based on Siemens Sinumerik 840D - Operator panel with 12" TFT color display - Program management - Integrated technology data - Remote teleservice via Internet - Integrated e-shop Programming - Shopfloor programming based on TruTops Punch Basic - Easy programming Data transfer - USB interface and network connection Safety - CE marking - Multi-beam safety light curtains - Hydraulic quick-stop - Sheet bulge detection - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Engraving function - Deburring and roller technology - Marking/rapid bead function - MultiShear function - Adaptive stroke calibration - Spray lubrication for die Ksdpfx Aasyvugqjlsww - Active die - Additional clamp - Individually opening clamps - Repositioning cylinder - Sensor for part chute - Vibration-damped installation - Sheet bulge detection - Chip conveyor with tilting container - Brush tables with loading and unloading aids - Ejector device for small parts Automation SheetMaster Standard features: - Peeling suction unit - Vacuum sensors - Central lubrication - Sheet thickness measuring device for double sheet detection - Automatic clamp closing - Modular suction plate - Simultaneous loading and unloading during main time GripMaster - Scrap skeleton tongs with sensors - Scissor lift table 400 mm - Scrap skeleton pallet tiltable 1250 x 2500 mm ToolMaster 40 - Simultaneous operation for ToolMaster SortMaster Pallet L2

Condition: good (used), Manufacturer: LVD STRIPPIT Type: Global 20 FANUC Control: FANUC 180i-P Year of manufacture: 2006 Thick turret WILSON tool system Under power inspection possible Large package tooling WILSON Auto indexing rotation tools included Laser safety guids included Specifications Metric US standard Table load 150 Working area X axis 2500 mm Working area Y axis 1250 mm Working area X axis with takeover 5000 mm Punching force 20 T Max. sheet thickness 6 mm Turret positions 30 Auto index. positions 4 Positioning speed X and Y axis 4500 mm/min. Turret change speed 900 rpm Dimensions (estimate) Length 6400 mm Width 5600 mm Ksdpfev Ic Tqox Aaloww Height 2445 mm Weight 16500 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches Kwedpfjyu S D Asx Aaljw - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: used, Year of construction: 2000, Pressing force 28 t X-axis 2000 mm Kwedpfx Aaeyv Nnpslsw Y-axis 1000 mm machine weight ab. 11000 kg

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale: 1 piece used hole punch Manufacturer: Geka type: Puma 110 2HI Punching force: 110t incl. documentation Kwodpfxouihvze Aalsw Dimensions see type plate Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: used, total length: 1,700 mm, total width: 820 mm, total height: 1,570 mm, Empty weight: 580 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4077950107003 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 38 - Round bar cutting capacity [mm]: 32 - Shearing width [mm]: 300 - Max. plate thickness shearing [mm]: 15 - Options: Length stop - Transport dimensions: 1700mm x 820mm x 1570mm (l x w x h) - Transport weight [kg]: 580kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kodpfx Aoymfbfealsww Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,100 mm, total width: 1,670 mm, total height: 1,900 mm, Empty weight: 1.930 kg - Documentation available: No Kjdpfxeymfa Uj Aalsww - CE certificate present: No - Serial number: 4422758897010 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 60 - Punch throat depth [mm]: 400 - Notching width [mm]: 70 - Max. plate thickness notching [mm]: 13 - Round bar cutting capacity [mm]: 40 - Shearing width [mm]: 400 - Max. plate thickness shearing [mm]: 20 - Options: Length stop - Transport dimensions: 1100mm x 1670mm x 1900mm (l x w x h) - Transport weight [kg]: 1930kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum