Used High Pressure Casting Machine for sale (78,638)

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available - Dcedpfx Agovlz Ars Dsf

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-Pressure Cleaning Unit, High-Pressure Jetting Unit, High-Pressure Built-in Jetting System on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in commercial vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Whale 30/250 | 30 l/min at 250 bar | Engine: Honda GX630 14.7 kW Whale 36/210 | 36 l/min at 210 bar | Engine: Honda GX630 14.7 kW Whale 43/180 | 43 l/min at 180 bar | Engine: Honda GX630 14.7 kW Whale 55/160 | 55 l/min at 160 bar | Engine: Honda GX690 17.7 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 650 x 1,000 x 1,030 mm Unladen weight without water tank: approx. 250 kg Dimensions & unladen weight with 300 l water tank: approx. 1,160 x 1,000 x 1,030 mm & approx. 280 kg Dimensions & unladen weight with 500 l water tank: approx. 1,260 x 1,000 x 1,030 mm & approx. 300 kg HIGH-PRESSURE PUMP: - Manufacturer: COMET - Model: TW 13022S Premium ENGINE: - Manufacturer: Honda - Model: GX 690 - Fuel: Petrol - Cooling: Air - Cylinders: 2 - Displacement: 688 cm³ - Max. output: 24 hp (17.7 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Gearbox housing CONTROL PANEL: - Ignition key - Hour meter - Electronic fuel gauge - LED indicator for low oil pressure - Emergency stop button INSTALLED ALARM: - Water shortage protection to prevent high-pressure pump running dry, with automatic shut-off function. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a manometer. HIGH-PRESSURE HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 60 m ½” high-pressure hose - Hose: 50 m ½” high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) FUEL TANK: - Capacity: approx. 13 l WATER FILTER: - With washable cartridge and drain valve - Filtration: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control; - Engine On/Off Dedpfx Agodqmttj Decf - Bypass On/Off - Electronic speed control +/- - Emergency stop button - Battery charger for remote control - 300, 400 or 500 l polyethylene water tank OPTIONS ON REQUEST: - 60 m ½” high-pressure hose - Pulsation/booster pump - Second high-pressure hose reel - Electric high-pressure hose reel (requires connection to vehicle battery) ACCESSORIES ON REQUEST: - STORZ kit for hydrant connection - UNI 45 kit - Mobile hot water generator 10 kW – 12 VDC - High-pressure spray gun kit, swivel and quick coupling - High-pressure lance kit with 15° flat jet nozzle / rotary nozzle - High-flow lance kit - Rotary nozzle kit - Twin-head nozzle kit - Water sandblasting lance kit - Detergent dispenser kit - Step cleaning device - Surface cleaner - Sludge suction device (Venturi) - Pipe cleaning nozzles - Further accessories available on request

Year of construction: 2020, operating hours: 1 h, condition: new, - Pressure washer PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, ... Dedsfh Skajpfx Ag Decf - cold water / hot water / steam 32 bar up to 140°C / high pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and empty weight : 110x64x98cm, approx. 150kg - incl. 10 m high pressure hose, spray gun, lance and flat jet nozzle 25°.

Condition: used, Year of construction: 1998, operating pressure: 100 bar, overall weight: 590 kg, rotational speed (max.): 600 rpm, power: 30 kW (40.79 HP), URACA high-pressure pump unit Type: RS606E/100 URACA 3-plunger pump KD606 Dedpfxev Hqpqo Ag Dscf Flow rate: 138 l/min with 30 kW electric motor

Year of construction: 2019, condition: used, Automatic high-precision tube cutting machine TS72, made by ADIGE Cuts round, square, rectangular, and flat-oval tubes up to 102 mm in diameter. Efficient production: - Program up to 4 different cut lengths per tube - Continuous measurement changes for small batches Organized unloading: - Program up to 3 different unloading positions plus a scrap container. Non-Stop unmanned production: - Automatic production changes without tools. - High-capacity bundle loader holds up to 4000 kg of material. Dcsdoymangopfx Ag Def Superior Cutting Quality: High precision, efficiency, and versatility for tube cutting - Independently operated hydraulic material clamps ensure precise clamping and high cut accuracy. - Blade and clamps detach during return movement to prevent wear. TECHINCAL DATA Working range - Round tube cutting: from 8 to 102 mm - Square tube cutting: from 10x10 to 80x80 mm - Bar cutting: Up to 40 mm - Cutting length: From 20 mm to 3.000 mm Loading - Loading from bundle: Fully automatic - Unloading positions: 3 + 1 (scrap) Tools - Cutting blade diameter: From 200 to 350 mm General - Total installed power: 20 kW Round tube cutting: from 8 to 102 mm Square tube cutting: from 10x10 to 80x80 mm Bar cutting: Up to 40 mm Cutting length: From 20 mm to 3.000 mm Loading from bundle: Fully automatic Unloading positions: 3 + 1 (scrap) Cutting blade diameter: From 200 to 350 mm Total installed power: 20 kW

Condition: used, machine/vehicle number: 4131, Comm. no. Lg 34422 High performance automatic punching machine BRUDERER BSTA 60 H from current production. Stroke adjustment has to be repaired. Dcedpsinzdljfx Ag Dsf Without soundproof cabin and without conveyor system. Feed BBV 202/120

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 527, Price for the machine: 214,500 EUR Price for the tools: 97,500 EUR Dcsdpfeu Ivc Nex Ag Def

Condition: ready for operation (used), Year of construction: 2006, A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible. Dcjdpfjw R Dgzsx Ag Dof

Year of construction: 2019, condition: ready for operation (used), Two Linde high-pressure tanks are available for the storage of hydrogen (GH2/GHe). Diameter: 2000mm, height: approx. 10600mm, wall thickness: 100mm, usable volume: 21.9m³/3600Nm³, max. operating pressure: 200bar, medium weight hydrogen/helium: 305kg/465kg, empty weight: 45000kg. Documentation available. On-site inspection is possible. Dodpfxjwxd Uvs Ag Docf

Year of construction: 2007, condition: ready for operation (used), A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible. Djdpfx Agswal H No Docf

Condition: ready for operation (used), A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible. Dsdpfx Ajxxa T Ejg Decf

Condition: excellent (used), Year of construction: 1993, wire diameter range: 2,4 - 3,8 mm nail length: 50 - 90 mm Dcodpfsd Ez Erox Ag Djf output: 820 nails/min

Condition: new, Year of construction: 2023, operating pressure: 1,000 bar, fuel: diesel, Kärcher HD 9/100 De Skid Advanced High pressure cleaner with up to 1000 bar This is an unused exhibition device! Current manufacturer RRP €80,000! The machine is being sold as a used machine with no return, guarantee or warranty. Net price €24,900 // Gross price €29,631 Dcsdpfovz Aq Aex Ag Dof - Viewings possible! - Shipping can be organized nationwide, costs €300 - We would be happy to have our leasing partner create an attractive leasing/financing offer for you!

Condition: used, Year of construction: 1990, operating hours: 9,500 h, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, water tank capacity: 2,000 l, fuel tank capacity: 600 l, water pressure: 1,000 bar, pump capacity: 130 l/min, We offer this used Woma 325ZP30 high-pressure water jet in isotermic container, year of construction 1990. It could be sell separetaly without container. Dcedpfxoyu Imtj Ag Dsf If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, Operating Area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Laser Output Power: IPG 3000w/2000w/1500w Bwrzu0tz8a Dcodeg Duzwspfx Ag Djf X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 100m/min 1. A Compact Design with Complete Protection Small occupied space balances complete protection and higher safety. 2. Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 3. Cast Iron Bed Featuring good shock absorption, Cast Iron Bed keeps its shape all the way with the optimal mechanical property.

Condition: good (used), 1 used high-pressure machine vise Manufacturer: Allmatic Type: 160 Technical specifications: Jaw width: 160 mm Clamping range I: 0 mm – 152 mm Dsdpfx Agjw Sdxgj Decf Clamping range II: 147 mm – 302 mm Clamping force: 60 kN Weight: 60 kg Base body height: 137 mm Jaw height: 50 mm Support height: −0.0585 mm L4: 613 mm – 915 mm 2 units available

Condition: used, Year of construction: 2007, x-travel 550 mm y-travel 400 mm z-travel 400 mm Control INGERSOLL ANDRONIC Dcjdpoxiy A Uefx Ag Dof

Condition: good (used), High-pressure standpipe -Pressure: maximum 30 bar Dcedpfjb A Shpjx Ag Def -Predos is a special high-pressure stainless steel standpipe with a burst pressure of 70 bar. -Pressures of up to 30 bar may be required when clearing blocked drains. -High-pressure gauge -with lid lifter type: Hercules -in the suitcase -Dimensions: 1200/360/H200 mm -Weight: 16 kg

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MK 4) • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting attachment • Two 18 mm T-slots each on rear and left of machine base • 3-axis digital readout • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose - table top min 40 mm, max 710 mm Distance spindle nose - base plate min 840 mm, max 1510 mm Drilling radius min 540 mm, max 1590 mm Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2,800 Dodpfx Ajx Uwpxsg Docf Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic system diagram Electrical wiring diagram

Condition: good (used), Top-maintained Falch Trail Jet 15 500 bar 1790 hrs Year 2019 Djdpfx Asuvd N Ssg Dscf Purchased from Falch Hot water Service maintained by Falch Various accessories optional

Condition: ready for operation (used), Faithfull Printing Equipment Digithick TM-353 High-precision Thickness Gauge SN:602262 + Side Table 1040 x 520 x 760 mm, used, normal signs of wear, 100% fully operational, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and transport! Dsdpfx Aex Eq Hrog Djcf

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: fanuc, controller model: 16i MA, table width: 1,000 mm, table height: 500 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, overall weight: 9,300 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 8,000 h, spindle nose: HSK 63A, number of slots in tool magazine: 25, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, High-speed, high-precision vertical machining centre of Japanese manufacture. Furthermore, equipped with the following OPTIONS: Dcsdpfx Agexryb Ne Djf MARPOSS wireless 3D workpiece measuring probe, swarf/chip conveyor, high-pressure coolant through the spindle, extended coolant system: 12 nozzles, 100 l/min capacity, electrospindle: 20,000 rpm, 22 kW, HSK 63A taper, with dedicated chiller, tool magazine expanded to 25 positions, FANUC high-dynamic drives (Alpha 22 and Alpha 30), ballscrews cooled by a dedicated chiller, linear optical scales, tool setter (length and breakage detection), active tool load monitoring, ROTOCLEAR on the main door, FANUC SUPER GI option (Geometric Intelligent Control), FANUC RISC option (Reduced Instruction Set Computer), FANUC NURBS option (Non Uniform B-Spline), FANUC DATA SERVER option (160Mb), FANUC ETHERNET network port option, serial RS 232 output.

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may Dodpsrhidmefx Ag Decf be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Technical details: Type 1000/1500 Series Working pressure approx. 3–14 bar Spray volume approx. 1.2–2.6 l/min Dcedpfx Ajyhwiujg Dof Operating temperature 95 °C in approx. 60 s 400V Heating power 14.4 kW Motor 2x0.45 kW Fresh water tank 60 L Concentrate tank 5 L

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. Dcjdpfx Asx E Utijg Dsf The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.