Used High Pressure Casting Machine for sale (78,044)

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: TL 75, Self-propelled high-frequency welding machine 10 kW with table, welding length approx. 20 m, currently still in operation. Welding beam length approx. 100 cm. Minor defects such as slight air loss, laser does not work properly, one switch is faulty, welding automation is not functional. Hnjdpfx Afjydvv Isnjh The system is currently operating 6 to 8 hours daily. Various spare parts included. The machine can be inspected at our facility until mid-February.

Year of construction: 1998, condition: good (used), machine/vehicle number: 98.01112.1773, Stationary high pressure pump unit Hammelmann HDP 122 on base frame without engine. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 530 bar Delivery rate: 55 l/min. Drive speed: 1500 rpm. Driving power: 55 kW without motor, with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm weight: approx. 300 kg year of construction: 1998 Hnsdpfx Aegz H Akofnoh Condition: in good used condition.

Condition: new, Year of construction: 2025, operating hours: 30 h, operating pressure: 2,800 bar, pressure: 2,800 bar, fuel: diesel, overall weight: 2,800 kg, HAMMELMANN AQUA JET 144 Year: 11/2025 NEW MACHINE UNDER WARRANTY I have 5 machines from 2025 for sale Available for immediate delivery Hsdpsyki U Rsfx Afnsnh

Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 40mm in steel Thread cutting device Coolant system Hsdpfox N Iftsx Afnenh Documentation

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 2132072, REF: MM6195 1 x Foodlogistik GmbH high-capacity dicing machine supplied with dicing multigrid. This is a fantastic high-throughput dicer for dicing fresh, tempered and cooked meat. Technical specification ⚙️ ✅ Manufacturer - Foodlogistik GmbH ✅ Model - DICR CAPACITY 126. ✅ Serial number - 2132072. ✅ Date of manufacture - 2013. ✅ Throughput / capacity - up to 2,400 kg/h depending on product. ✅ Chamber dimensions - 530mm long x 126mm wide x 126mm high. ✅ Electrical requirements - 400-415 V / 50 hz / 3 phase. ✅ Power - 5.6 kW. Dicing grid - multigrid, currently set up for 10mm cubes. ✅ Condition - very good, last used in June 2025. Hsdpfx Afexfll Tononh

Condition: new, Year of construction: 2025, Operating Area: 1000*1500mm Machine overall dimensions: 3630×2200×1940mm Laser Output Power: 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 60m/min 1. A Compact Design with Complete Protection Hnsdpfeg Db Uqox Afnoh Small occupied space balances complete protection and higher safety. 2.No Quiver when Cutting Thin Sheet i Series are capable of cutting edges of thin sheet and ensure no quivering marks.

Condition: used, Year of construction: 2007, 1 piece EDM machine, manufacturer Ona, type DB 300, year of manufacture 2007, serial no. 10955, machine weight 2,800 kg, XY travel approx. 400x300 mm, magnetic table approx. 400x180 mm, CNC control, fine finishing generator, C-Box, 3-axis with 3-R system, band filter system, cooling system, cooling unit by Alfa Laval, maximum workpiece weight 350 kg, internal no. 19 Hodjyaw R Sjpfx Afnonh

Condition: new, MSP – Manual Hand Spray Systems The MSP range of manual hand operated washing systems are made entirely from high quality stainless steel 304 and can be supplied high-pressure ump option achieving pressures of up to 60 bar. Thanks to a specially designed heavy-duty washing chamber the MSP range washes parts within a closed sealed envireonment ensuring the surrounding workplaces is kept clean, tidy and dry from pressurised water. The MSP range is enviromentally friendly by utilising alkaline aqueous biodegradable detergents and allows for effective energy consumption using a foot pedal operation that oprates the pump only when pressed. This makes the MSP a very capability unit and a must have for any workshop enviroments cleaning heavy soiled contaminants. Hnedpfx Afeh E Szmenoh

Condition: used, Year of construction: 2021, operating hours: 1,231 h, functionality: fully functional, total width: 720 mm, total length: 950 mm, total height: 800 mm, pressure: 500 bar, operating pressure: 450 bar, type of input current: three-phase, overall weight: 175 kg, high-pressure hose length: 20,000 mm, volume flow: 0.96 m³/h, empty load weight: 175 kg, input voltage: 400 V, hose length: 20,000 mm, High-pressure washer/sandblaster DENJET CE 20 COMPACT 500 - Pressure: 500 bar - Flow rate: 16 l/min - Power supply: 15 kW - Voltage: 400 V - Current: 28 A - 20 m wear-resistant high-pressure hose with ½” BSPP female swivel couplings (extension hose). - 15 m oil-resistant 4-core electric cable. - Dry shut-off trigger gun with 0.85 m stainless steel lance. - Straight jet nozzle Hedpfxoyak Tys Afnsnh - CEE electric plug. - Rotating nozzle. - Sandblasting kit with boron carbide nozzle. - Mobile abrasive container. - Personal protective equipment: helmet with eye protection, waterproof coverall, protective apron rated for up to 1000 bar, protective boots size 43.

Year of construction: 2013, condition: excellent (used), machine/vehicle number: B3.00122.2279, Stationary high pressure pump unit Hammelmann HDP 122 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 122 Working pressure: 440 bar Delivery rate: 92 l/min. Drive speed: 1500 rpm. Drive power: 75 kW with AC motors ACM 208S 75 kW electric motor, IP55, with pressure regulating valve, with safety valve, Hnodpfohf Ixmex Afnoh with oil cooling system. dimensions LxWxH: approx. 1.800x900x1.450 mm weight: approx. 1.230 kg year of construction: 2015 Condition: in very good used condition.

Year of construction: 2005, condition: good (used), Stationary high pressure pump unit URACA KD716-G on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 100 bar Delivery rate: 263 l/min. Drive speed: 1.500 RPM Drive power: 46 kW Hnedpfxom Uywlj Afnsh with AEG 3~motor with URACA MSSV 32/150 safety and switching valve with control panel, manometer and pulsation damper. dimensions LxWxH: approx. 1900x1100x900 mm Weight: approx. 1.000 kg Year of manufacture: 2005 (MSSV valve year 2015) Condition: in good used condition.

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 300 bar Delivery rate: 153 l/min. Drive speed: 1500 rpm. Drive power: 90 kW with VEM motor 90 kW 3~motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Hnjdohtnniopfx Afnoh dimensions LxWxH: ca. 2300x1000x1400 mm weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition.

Year of construction: 2012, condition: excellent (used), machine/vehicle number: B2.01127.1899, Stationary high pressure pump unit Hammelmann HDP 127 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 127 Working pressure: 650 bar Delivery rate: 72 l/min. Drive speed: 1500 rpm. Driving power: 87 kW with EMK KAE2G280M-4B3E3K electric motor 90 kW, IP55, IE3 with pressure control valve, with safety valve, with oil cooling system. Hnodpsix I H Uofx Afnsh dimensions LxWxH: approx. 1.700x850x1.350 mm weight: approx. 1.200 kg Year of manufacture: 2012 Condition: In very good used condition.

Year of construction: 2018, condition: excellent (used), machine/vehicle number: B8.01142.0395, Stationary high pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 142 Working pressure: 610 bar Delivery rate: 78 l/min. Drive speed: 1500 rpm. Driving power: 86 kW with AC M 280 M-4/HE electric motor 90 kW, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.700x850x1.450 mm Hnedpfx Aoh E Dgzjfnoh Weight: approx. 1.200 kg Year of manufacture: 2018 Condition: after service by Hammelmann in October 2020 run only a few weeks and out of service for more than a year. In very good used condition.

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Column diameter 250 mm Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Hodpfx Afst Uzk Ronjnh Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Hjdjx Hnz Nspfx Afnsnh Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Year of construction: 2025, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Hedpfxof A Nqqe Afnsnh - External mini-pneumatic oil separator

Condition: good (used), Top-maintained Falch Trail Jet 15 500 bar 1790 hrs Year 2019 Purchased from Falch Hot water Hnedpouvd N Sofx Afneh Service maintained by Falch Various accessories optional

Condition: used, machine/vehicle number: 4131, Comm. no. Lg 34422 High performance automatic punching machine BRUDERER BSTA 60 H from current production. Stroke adjustment has to be repaired. Without soundproof cabin and without conveyor system. Feed BBV 202/120 Hnodpfxjinzdle Afnoh

Condition: used, Year of construction: 1993, machine/vehicle number: 4803678, overall weight: 11,200 kg, Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01. Hedsvyfmqjpfx Afnjnh

Condition: used, High-pressure piston compressor Manufacturer: ATELIER FRANÇOIS Model: CE 2B Year of manufacture: 1993 Hedpfx Aow Tmfxjfnenh Nominal capacity: 390 m3/h Current capacity: approx. 300 m3/h Pressure: 40 bar Technical condition: used, requires technical inspection, control cabinet missing

Condition: as good as new (ex-display), Year of construction: 2025, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Hnodpfxeurud Eo Afnjh Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: new, Year of construction: 2025, Operating Area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Laser Output Power: IPG 3000w/2000w/1500w Bwrzu0tz8a X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 100m/min 1. A Compact Design with Complete Protection Small occupied space balances complete protection and higher safety. 2. Active Anti-collision Function Hsdpfx Asg Duzwsfnonh Effectively reduce the damage rate of laser heads, help you save maintenance cost. 3. Cast Iron Bed Featuring good shock absorption, Cast Iron Bed keeps its shape all the way with the optimal mechanical property.

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Hjdsxx U Ecopfx Afnenh

Condition: used, Year of construction: 2003, operating hours: 4,500 h, functionality: unexamined, operating pressure: 2,500 bar, empty load weight: 2,600 kg, fuel: diesel, water tank capacity: 200 l, We offer this used Falch T25 high-pressure cleaner, year of manufacture 2003. Hedpfjyi Dnpox Afnsnh Manufacturer: Falch Model: T25 Year of manufacture: 2003 Condition: used Category: 285 Type: high-pressure cleaner If you have any further questions or require more information, please do not hesitate to send us a message or call us.