Electric 300-700bar 15-30l/min.

PTC Easypower E

Year of construction: 2022, condition: as good as new (ex-display), Pressure washer PTC Easypower XL E similar but not Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Feed rate: 13-38 l/min. - Motor: IE3 electric 63A, 3Ph-400V-50Hz 50PS/37kW, 1450 1-min or IE3 electric 63A, 3Ph-440V-60Hz 50PS/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Tare weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easy manoeuvrability - Industrial low voltage supply (24V) and control unit with star-delta starter and 10 m. Power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operating hours counter - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power XL E 38/400 | 38l/min 400bar | 30kW | 560kg Easy Power XL E 30/500 | 30l/min 500 bar | 30kW | 560kg Ffjdpfx Aefdzxijfneu Easy Power XL E 20/800 | 20l/min. 800bar | 30kW | 580kg Easy Power XL E 15/1000 | 15l/min 1000bar | 30kW | 580kg Easy Power XXL E 19/1000 | 19l/min 1000bar | 37kW | 580kg Easy Power XXL E 15/1250 | 15l/min 1250bar | 37kW | 580kg Easy Power XXL E 13/1500 | 13l/min 1500bar | 37kW | 580kg

Condition: as good as new (ex-display), Year of construction: 2023, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm Ffodpfx Ajxabntsfnou - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), Pressure washer PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar Ffedpfx Asfdzz Usfnou - Feed rate: 38 or 30 l/min. - Motor: electric 63A, 3Ph-400V-50Hz 40PS/30kW, 1450 1-min or electric 63A, 3Ph-440V-60Hz 40PS/30kW, 1750 1-min - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easy manoeuvrability - Industrial low voltage power supply (24V) and control unit with star-delta starter and 10 m. Power cable - Safety switch with thermomagnetic relay for motor protection - 4 pieces industrial wheels - Direct water intake through self-priming pump - Stainless steel relief valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power L E 38/500 | 38l/min. 400bar Easy Power L E 30/500 | 30l/min 500bar

Condition: new, functionality: fully functional, Year of construction: 2025, total length: 1,000 mm, total width: 990 mm, power: 2.9 kW (3.94 HP), input frequency: 50 Hz, warranty duration: 12 months, NEW Baking Stage NEW Model: Modul 1-64 Modular deck oven with ceramic stone plate For trays 1 x 40/60 Programmable control with night start Baking chamber interior dimensions: 630x550x180mm (W x D x H) Stainless steel construction Temperature up to max. 350°C Only from us: DGUV V3 tested Connection: 400V, 2.9 kW, 16A CEE plug Dimensions: 990 x 1000 x 440 mm (W x D x H per deck) Brand new & SAB tested With warranty + spare parts service Water connection 3/4 inch, water drain DN 40 Options: Leasing & rental service Extraction hood Extraction hood with condenser Mobile base with tray rack Proving cabinet Puller/electric loader Manual loader Maintenance contract Delivery & commissioning by master baker Fjdjtp D Skepfx Afnsfu Further ovens in stock!

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height adjustable Fedpfxehh A Iyo Afnefu Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems

Condition: used, Year of construction: 2024, operating hours: 315 h, machine/vehicle number: 36373, fuel type: diesel, Empty weight: 3.425 kg Lifting capacity: 250 kg Working height: 2.700 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1700 m Ffedpjvf T Uysfx Afnju Transport dimensions (LxWxH): 7.69x2.2x2.98 Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2025, functionality: fully functional, Dry Ice Cleaning Machine Model X-FORCE – Polish Manufacturer! This listing features a state-of-the-art X-FORCE dry ice cleaning machine, manufactured by the first Polish producer of such equipment. Our devices are sold worldwide and supported by an extensive service network. This is a professional, efficient, and reliable device designed for cleaning surfaces without the use of water or chemicals – the ideal solution for industry, workshops, maintenance, and restoration. Dry ice cleaning technology. Key advantages of the X-FORCE machine: • Polish manufacturing – quality assurance, robust construction, full service support, and spare parts availability. • High performance – effective cleaning with no surface damage. • Mobile and compact – easy to transport and operate. • Environmentally-friendly technology – dry ice cleaning without chemicals and no secondary waste. • Safe operation – 230V power supply, electric vibrator ensures stable ice feed. Technical Specification – X-FORCE: Parameter | Value Dimensions | 100 × 50 × 55 cm Fodpjxy Ilfofx Afnefu Weight | approx. 100 kg Dry ice hopper capacity | 37 kg Operating pressure | 1.7 – 20 bar Dry ice feed range | 0 – 3.5 kg/min Dry ice stream diameter | 1 1/4" Air consumption | 1.5 – 6.0 m³/min (5 bar) Power supply | 230V AC (50/60 Hz) Electric vibrator Applications: • Cleaning of injection molds and dies • Cleaning and maintenance of industrial machines and equipment • Restoration of metal, wood, and stone surfaces • Removal of paints, greases, oils, and industrial contaminants • Cleaning electrical and electronic devices (no risk of flooding) • Post-fire cleanup Why choose X-FORCE: When you purchase a machine from the original Polish manufacturer, you not only receive a high-quality device, but also: • 24-month manufacturer’s warranty • Technical support and operator training • Access to accessories and spare parts • Warranty and post-warranty service on all continents! We are the only dry ice cleaning machine manufacturer offering a 24-month warranty. Brand new machine, ready for operation. Customisation of machine parameters and colour schemes available for larger orders.

Condition: used, D-6886-Delford Type SP 800 Ffedpfjc Nlxpjx Afnju Delford SP800, Film wrapping machine, Packing materials: stretch films 12,5 – 25 micron (50-100 gauge) P.V.C. or any suitable heat sealable types. Max. roll with 450 mm, max. roll dia. 250 mm. Speed of operation: 40 – 80 packs per minute. Max. Packs sizes: L 300 mm, W 200 mm, H 120 mm, Girth 420 mm, Min. Packs sizes: L 130 mm, W 90 mm, H 10 mm, Girth 200 mm, Dimension: 5290 x 1049 x 1430. Machine weight: approx. 1400 kg.

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. Ffjdpfx Afsghgbhonou The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Year of construction: 2008, condition: excellent (used), Screw pump Manufacturer: Busch Type: Cobra DS 600 E Status: very good condition Ffjdpfx Afed Rafbjnju Delivery time: from stock