Used Heating Screw for sale (20,017)

Year of construction: 2025, condition: new, Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specifications: capacity: up to 5 m³/h depending on product, suitable to dose up to 10kg/filling; Discharge height: ca. 1.850mm; standard angle: 45°; diameter of pipe: 141mm; Power: 380V, 1.56kW; machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device); weight: ca. 170kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Gujdpfxov Nk Avo Aaxsh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. Godpfx Ajwz Ry Dsaxsuh The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control screen and plc. Godpfx Aeyivr Teaxouh

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 250 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 55 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 4 kW / 10 bar Guodpfjzpxx Ijx Aaxeh (also available as a 7.5 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure vessel refrigerant dryer fine filter New machine, delivery time approx. 1 week We would be happy to demonstrate the machine at our premises. Highly efficient, permanently excited servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color screen single-stage screw unit air-cooled durable and low maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 250 kg Pressure: 10 bar Flow rate: approx. 0.6 m³/min at 10 bar Noise level: 55 ± 2 dB(A)

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Gjdpfxjy Ecuze Aaxsuh Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: 16 Bar Version Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. Guodpfx Aajy Nkqxsxjh If you are interested or need more details, please send me a message.

Condition: used, Year of construction: 2022, operating hours: 15,000 h, functionality: fully functional, overall weight: 2,020 kg, power: 90 kW (122.37 HP), volume flow: 960 m³/h, operating pressure: 8 bar, pressure (max.): 8 bar, Equipment: documentation/manual, type plate available, We offer this used Hertz FRECON 90 P screw compressor, manufactured in 2022. Pressure: 8 bar Capacity: 16 m³/min Rated power: 90 kW Weight: 2020 kg Voltage: 400 V Frequency: 50 Hz Gusdpfx Aoz Abb Eeaxjh Maximum shaft speed: 2340 min⁻¹ Date of manufacture: 04/2022 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31.064-R-11/2022, overall weight: 1,200 kg, heating capacity: 49 kW (66.62 HP), total height: 2,090 mm, total length: 2,270 mm, total width: 780 mm, Equipment: documentation/manual, Offering a used Optimal E Gr.II-S hot air furnace. Sale due to workshop restructuring. Heating capacity, special version: 49 kW. Cleaning side on the right – with automatic control. - Complies with 1st Federal Immission Control Ordinance (BlmSchV) – Stage 2!!! - Suitable for rooms according to DIN, up to 700-1250 cubic meters. - According to the Federal Immission Control Ordinance (BlmSchV), approved for particleboard or coated wood-based materials (only in woodworking or wood processing companies). Fine sawdust or dust of any kind is not suitable – risk of deflagration!!! Godpjzy R Rdsfx Aaxeuh - Furnace consumption: approx. 15 - 25 kg/h. - Tested in accordance with DIN EN 13240: 2005-10 (continuous operation), DIN EN 13229:2005-10, DIN EN 303-5:2012-10. Sale does not include the stainless steel chimney.

Condition: like new (used), Grundfos NB 32-200/206 Single-stage block pump, centrifugal pump Speed: 2915 min⁻¹ Flow rate Q: 33.7 m³/h Head: 46.3 m Max. pressure: 16 bar Gujdpfxjzzllxo Aaxjh You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Guodpfx Aozzmw Nsaxsh Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 63 Serial no.: 063.008271.r.1004 Screw diameter: 2 x 63 mm Screw length: 17 x D Gusdpfx Aezrt Enoaxjh Condition: used

Condition: good (used), Year of construction: 1993, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Mahle, screw compressor type MSK G11 -Drive power: 11 kW -Volume flow rate: 1.48 m³/min -Max. pressure: 10 bar Gusdpozulbtjfx Aaxeh -Individual components: see photos -Dimensions: 730/690/H1315 mm -Weight: 291 kg

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Gsdpfx Aszty Hneaxsuh Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Condition: used, Year of construction: 1999, Capacity: 350 hl/h Operating over pressure: 24 bar Desing temperature: 104 °C Guedpfszty Tusx Aaxsh Length: 1,6 m Width: 0,85 m Height: 2,2 m Weight: 5000 kg Features: product pump H: 9,8 bar (Hygiana CN II, GEA, 350 hl/h), booster pump H: 4,7 bar (EURO Hygia CN II, GEA, 350 hl/h), hot water pump H: 1,3 bar (Maxa -DIN 80-2ßß 4/4, GEA, 700 hl/h)

Condition: used, Year of construction: 1993, Capper for applying screw caps to glass bottles. Additional title: Screw-capping machine with 4 capping heads Capacity approx.: 9000 bottles/h Gjdpjztzbgofx Aaxeuh Length: 1,9 m Width: 0,9 m Height: 3,05 m Weight: 500 kg Formats: 0,5 l euro Features: 4 capper station

Condition: used, Year of construction: 2014, operating hours: 14,938 h, functionality: fully functional, power: 11 kW (14.96 HP), volume flow: 104.4 m³/h, pressure (max.): 8 bar, type of cooling: air, Screw compressor Boge C15F Inverter integrated 11 kW 8 bar Guodpfxjztrt Ts Aaxjh 1.74 m3/min Year of manufacture: 2014 Operating hours: 14,938

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. Gjdpfoztu Dbox Aaxsuh TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, L & Z Lathe / DREHMA D 410x1500 / New - Unused / Showroom Machine -CE marking -3-axis digital display -Turning diameter over bed: 410 mm -Turning diameter over cross slide: 225 mm -Turning diameter in the crotch: 580 mm -Turning length: 1500 mm -Spindle bore: 52 mm -Speed range (geared): 45 - 1800 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch etc. -Tailstock MK 4 -Drive power: 3.5 kW -Central lubrication -Electric chuck guard -Chuck guard via steel support Gedpszv H Ikjfx Aaxjuh -Fixed and traveling steady rest -Multifix base with inserts -3-jaw chuck 200 mm -4-jaw chuck 250 mm -Faceplate -Coolant system -Work light -Foot brake -Traveling center & drill chuck -Machine feet -Documentation Dimensions: L x W x H 2.2 x 0.1 x 1.6 meters / Weight 1850 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2012, operating hours: 74,233 h, functionality: fully functional, power: 75 kW (101.97 HP), volume flow: 720 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: refrigerant dryer, Kaeser CSD125TSFC screw compressor Inverter and dryer integrated Gedpfx Aaozya Tusxjuh 75 kW 8.50 bar 12 m3/min Year of manufacture: 2012 Operating hours: 74,233

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm -Turning diameter over bed 440mm -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds Guedpfx Ajzwggvjaxeh -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2006, operating hours: 8,482 h, functionality: fully functional, power: 160 kW (217.54 HP), volume flow: 1,410 m³/h, pressure (max.): 10 bar, type of cooling: air, Screw compressor, Kaeser DSD281 160 kW 10 bar 23.50 m³/min Year of manufacture: 2006 Operating hours: 8,482 h Godpfx Aezwgz Tjaxeuh

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Gsdpfx Aaozxqd Ioxjuh Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Year of construction: 2026, condition: new, A screw feeder with a capacity of 120 liters. The feeder diameter is 100 mm. The hopper has a vibration system. It can be disassembled for easy cleaning. The exact dimensions of the feeder are shown in the diagram. Gsdpfjzw Eb Esx Aaxjuh

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Godpfxoyt Emnj Aaxsuh Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer!

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D Gsdpoy A H Umofx Aaxouh • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.