Used Hall Heating Heater Oelheizung Warml for sale (19,238)

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 output sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall itself. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-fired air heater. The advantages: Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L with day/night/week program - Exhaust gas discharge via the roof, version B or C - Exhaust gas discharge through the outer wall, version C Gas-fired air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. rated heat input (Hs) QN: 30.08 kW Djdpfx Ajx Ihg Isb Aekw Max. rated heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance. The most well-known product from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install air circulation unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall, depending on the standard configuration. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of equipment, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-fired air heater. The advantages: Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust gas connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation Djdpex Ihiijfx Ab Aokw - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day-night-week program - Exhaust gas extraction via the roof, version B or C * - Exhaust gas extraction through the exterior wall, version C * Gas-fired air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat output (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m3/h Protection class: IP20 You can find more new and used products in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating made by WSG 100PA Dkedehrnv Njpfx Ab Aow Maximum air flow: 9800 m3 / h heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas axial fan 2pcs electric power: 230v 50Hz 0.62kw can be suspended mechanically adjustable slats honeywell gas regulator enclosure Size H: 150 cm SZ: 100 cm M: 155 cm

Condition: used, Reznor UDSA Gas-Fired Air Heater, 54.74 kW, Heating Capacity 5830 m3/h UDSA Gas-Fired Air Heater – Efficient, Even at Peak Performance Dodpfx Aswb A Hijb Askw The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures uniform air distribution in industrial halls. This air heater, which is easy to install, is available in 14 sizes ranging from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the hall, as standard. The UDSA gas-fired air heater from REZNOR ensures uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-Fired Air Heater. The advantages: Efficiency of over 92% The device is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. The gas-fired air heaters are suitable for: - Natural gas or liquid gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation° control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via the roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas-fired air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural Gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m3/h Protection class: IP20 Part No. 0461BN0677 More items – new and used – can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, flue capacity: 34 kW Conventional yeld capacity: 29 kW flue diameter: 160 mm Dksdpok Utrajfx Ab Ajw hot air delivery pipes: 2 x 180 mm flue length: 500 mm oven width: 400 mm oven hight: 590 mm air flow: 2200 m³/h power consumption: 400 W aproximate surface to heat up: 500 m³ area to be heated: 100/150 m² heater height without hot air conveying pipes: 1560 mm heater width : 550 mm heater lenght: 920 mm weight: 190 kg

Condition: new, Year of construction: 2026, flue capacity: 510 kW Conventional yeld capacity: 407 kW flue diameter: 250 mm hot air delivery pipes: 4 x 350 mm flue length: 1900 mm oven width: 900 mm oven hight: 900 mm Dkedpjk Utrwofx Ab Ajw air flow: 26000 m³/h power consumption: 4500 W aproximate surface to heat up: 8000 m³ area to be heated: 1800 m² heater height without hot air conveying pipes: 3000 mm heater width: 1220 mm heater length: 2700 mm weight: 1575 kg

Condition: new, Year of construction: 2026, flue capacity: 175 kW Conventional yeld capacity: 140 kW flue diameter: 200 mm hot air delivery pipes: 3 x 250 mm flue length: 950 mm oven width: 600 mm Dkjdsk Utrpspfx Ab Asw oven hight: 860 mm air flow: 6300 m³/h power consumption: 8900 W aproximate surface to heat up: 2200 m³ area to be heated: 500/600 m² heater height without hot air conveying pipes: 2200 mm heater width: 930 mm heater length: 1700 mm weight: 615 kg

Condition: new, Year of construction: 2026, flue capacity: 125 kW Conventional yeld capacity: 99 kW flue diameter: 180 mm hot air delivery pipes: 2 x 250 mm flue length: 750 mm oven width: 560 mm oven hight: 700mm air flow: 6300m³/h power consumption: 1500W aproximate surface to heat up: 1500m³ area to be heated: 300/350 m² Dedpfx Abjk Utrhs Aokw heater height without hot air conveying pipes: 1980 mm heater width: 800 mm heater length: 1280 mm weight: 415 kg

Condition: new, Year of construction: 2026, flue capacity: 350 kW Conventional yeld capacity: 279 kW flue diameter: 200 mm hot air delivery pipes: 3 x 300 mm flue length: 1200 mm oven width: 740 mm oven hight: 1040 mm air flow: 17800 m³/h power consumption hot air fan: 3 kW power consumption flue gas exhaust: 600 W aproximate surface to heat up: 5000 m³ area to be heated: 1000 m² heater height without hot air conveying pipes: 2500 mm heater width: 1100 mm heater length: 1900 mm Dkjdpfx Absk Utrte Ajw weight: 850 kg

Condition: new, Year of construction: 2026, Firebox output: 49 kW Working output: 45 kW New device, original packaging: yes Hot air blower, flue gas blower, control unit with digital display: included Hot air ducting: 2 x 200 mm with freely rotatable, plug-in bends Flue gas outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Airflow: 3500 m³/h Power consumption: 550 W Designed for room volume: 1000 m³ Area to be heated: 200/250 m² Oven height without hot air ducting: 1750 mm Dkjdpfsk Utrdex Ab Aew Oven width: 700 mm Oven length without flue gas blower: 1150 mm Weight: 305 kg

Condition: new, Year of construction: 2026, Firing chamber output: 49kW Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Power consumption: 550W designed for room volume: 1000m³ Weight: 310 kg Djdpfepn Nyzex Ab Askw

Condition: new, Year of construction: 2026, Firing chamber output: 34 kW Working power: 29 kW New appliance, original packaging: Yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 180 mm with 2 freely rotatable plug-in bends Intake filter / supply air filter: large-surface supply air filter without power loss / included Djdpfx Abopkwhqj Aokw Smoke outlet diameter: 160 mm Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Air flow : 2200 m³/h Power consumption: 400W designed for room volume: 500 m³ Area to be heated: 100/150 m² Stove height without hot air conveying pipes: 1560 mm Oven width: 550 mm Oven length without flue gas fan: 920 mm Weight: 200 kg

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Year of manufacture: 2007 - Rated heat input: 115 kW Dkjdpfxsyq Rics Ab Asw - Air output: 9,000 m³/h - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm - Pre-fitted for recirculation operation - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Djdpjz Ru Ersfx Ab Aokw Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: used, Fan heater, electric heater, heater, electric heater, electric heater fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi .: 21022588 Dodpofixa Ijfx Ab Ajkw -Type: EFF -Condition: without complete housing, see pictures -Power: 22 kW -Voltage: 3 x 400 V -Dimensions: 440/300 / H400 mm -Weight: 18 kg

Condition: new, Year of construction: 2026, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Djdsyffylspfx Ab Askw Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Year of construction: 2016, condition: used, functionality: fully functional, Miltenyi Biotec GentleMACS Octo Dissociator with heaters. Djdpjt E Hncofx Ab Aokw The gentleMACS Octo Dissociator with Heaters is a benchtop instrument for the fully automated and standardized tissue dissociation or homogenization of up to eight samples. Equipped with eight individual heating units and numerous optimized and ready-to-use gentleMACS Programs the gentleMACS Octo Dissociator with Heaters offers a fully automated workflow for tissue dissociation. In addition the instrument allows the user to create user-defined programs for almost any biological material. All eight positions can be operated independently. Single-cell suspensions or thorough homogenates are easily and reproducibly obtained using the unique C Tubes or M Tubes. These single-use gentleMACS Tubes allow sample preparation in a closed and sterile system, providing a high level of user safety and minimize cross-contamination. Applications The gentleMACS Octo Dissociator with Heaters is equipped with several programs for fully automated tissue dissociation into single-cell suspensions, including: - mouse or human tumor - mouse or rat neonatal heart - neural tissue - mouse spleen, lung, lamina propria, epidermis, or liver - mouse or rat skeletal muscle - and more Additionally, user-defined programs can be used to create fully automated workflows for all other tissue types. Good working condition. Please check out our other listings as well.

Year of construction: 2015, condition: used, Fan heater, electric heater, heater, electric heater, electric fan heater, heat exchanger, air heater, air heater, duct air heater, duct air heater Dedpefixa Hofx Ab Askw -Eltra item no.: 1BGL1CE04001 -Power: 30kW -Voltage: 467VAC -Dimensions: 460/350/H535 mm -Weight: 23kg

Condition: used, This listing is for Maplelab Scientific Block Heater The unit is in full working condition and ready for immediate use The Maplelab Scientific block heater is a laboratory dry-block heating unit designed for controlled heating of samples in laboratory tubes and vessels. The BH-603 model is suitable for applications requiring consistent sample heating at controlled temperatures Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Dkjdpfsztpyqsx Ab Aow Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Year of manufacture 2010 with feed with ash discharge with control Dedpfx Ajznca Heb Askw

Condition: used, Motan DH-1 N-A/B – Portable Continuous Flow Water Heater You are purchasing a fully functional continuous flow water heater from Motan. This unit comes from Bundeswehr (German Armed Forces) stocks and is in very good condition. Versatile for various applications, e.g., as a pool heater. It’s the perfect solution for quickly heating swimming pools. A 100 m³ swimming pool can be heated to 30°C in just 3 hours. You won't find a faster way to heat the water. Perfect for use anywhere where there is no electricity available. Camping sites, weekend houses, construction sites, and camping. Its effective output is continuously adjustable from 40.5 kW to 128 kW. Despite its high output, the unit is still portable, weighing only 130 kg. Dodeulgh Nepfx Ab Askw Since the water temperature can be set freely within the range of 30°C to 90°C, the unit can be used in many ways, e.g., as a hot water generator for camping shower facilities, for hot water production. Also perfect for Koi ponds. Technical data: Output: 35,000 kcal/h to 110,000 kcal/h, continuously adjustable (40.5 kW to 128 kW) Maximum water flow rate: approx. 3600 l/h Water at maximum heating output. With maximum water flow, the temperature increase is approximately 30°C, i.e., with a water inlet temperature of 10°C and a 30°C increase. Increase = 40°C final temperature Drive: Two-stroke engine, Fichtel & Sachs, Stamo 75, displacement: 75 cc Output: 2.5 HP at 4500 rpm Consumption: approx. 1.8 l/h, mixture 1:25 (for the engine!) For the burner, depending on the water flow, max.: 24 l/h gasoline at a maximum flow of 3600 l/h Tank capacity: 5 liters Dimensions: Width: 500 mm, Length: 1040 mm, Height: 850 mm Weight: approx. 130 kg Manufacturer's price: €8,000 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, This listing is for a Grant QBD1 Digital Dry Block Heater. (1 of 2 available) Dkodpfexv Dvljx Ab Aow The unit is in full working condition and is ready for immediate release. The Grant QBD1 is a versatile laboratory dry block heater with digital temperature control and capacity for one removable, interchangeable heating block. It provides an ambient +5°C to 130°C temperature range, with ±0.1°C stability and uniformity. Dimensions are approximately 200 x 240 x 120 mm and weight is 2.2 kg. Heating blocks are interchangeable and purchased separately Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the mos

Condition: used, mileage: 181,135 km, power: 100 kW (135.96 HP), first registration: 12/2013, fuel type: diesel, axle configuration: 4x4, wheelbase: 3,200 mm, fuel: diesel, CO₂ emissions: 230 g/km, color: white, gearing type: automatic, number of gears: 5, emission class: euro5, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), onboard computer, parking heater, power mirror, seat heater, sliding door, traction control, trailer coupling, = Additional Options and Accessories = - Exterior thermometer - Heated exterior mirrors - Electric front windows - Electronic brake force distribution - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable front seats - Front center armrest - Emergency brake assist - Rearview camera - Sliding door on the right side - Heated driver's seat - Immobilizer - Bumpers in body color - Insulated glass - Adjustable steering wheel = Additional Information = General Information Number of doors: 4 Technical Information Number of cylinders: 4 Engine displacement: 2,143 cc Dsdjzraglepfx Ab Askw Acceleration (0–100): 13.4 s Top speed: 176 km/h Weights Unladen weight: 2,020 kg Payload: 1,030 kg Gross vehicle weight: 3,050 kg Interior Interior: black Consumption Average fuel consumption: 8.7 l/100km Fuel consumption in urban areas: 11 l/100km Fuel consumption on highways: 7.3 l/100km Maintenance, History and Condition APK (Technical Inspection): New TÜV (technical inspection) upon delivery Number of keys: 2

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 Dedpfx Aju Scqbsb Aekw -Power: 20.3/23.3 kW -Operating pressure: max 10 bar -Number: 2x air heaters available, 1x with additional bracket -Price: per piece -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg

Condition: used, Year of construction: 2020, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, Zenith 46kw dark radiator 12-15 meter black radiator ZENIT-46/L dark radiator 15m long for sale in mint condition. complete unit with heat-reflecting shade, spacers, hangers, chimney if required make PAKOLE Zenit 46/L year of manufacture: 2020 heat output: 46kw pipe length: 12-15 meters p connection: 360mbar Dedpfx Abjudldfe Ajkw Connection voltage: Max. current consumption: IP21 AC 230V 50Hz