Used Heat Treatment for sale (15,685)

Condition: used, KMA Heat Exchanger and Pumping Station Iodpfx Aeym Dx Ajkpjtn

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Itjdpfsz Smqdox Akpjn Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,100 °C, overall weight: 1,700 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Electric car-bottom furnace for heat treatments on steels (normalizing, annealing, tempering, preheating, etc.) by Pagnotta Termomeccanica srl, Deruta, Italy. Maximum temperature: 1,100°C Usable loading dimensions: 1,250x800xh1,000 mm Capacity: 1,000 liters Ijdpozxxkvjfx Akpetn CE Declaration of Conformity Used and refurbished machine with new electric heating elements The listed specifications are for informational purposes only; the photos depict similar machines. The furnace can be customized according to your specific heat treatment process.

Year of construction: 1989, condition: good (used), functionality: fully functional, 300kg/h Capacity Electrically Heated Kohnle Heat Treatment Line Fully functinal Still in operation Line Consisted With : Isdpfx Ajxqy Duekpstn Loading - Electrically Hardening Furnace (1989)- Oil Tank - Rare Washing Machine - WMA Loading Unit For Tempering - Gas Heated Tempering Furnace (Industrial Ofenbau 2007) Protection Gas : Nitrogen / Methanol

Year of construction: 1988, condition: excellent (used), functionality: fully functional, 250 kg/h Capacity Gas Heated Aichelin Heat Treatment Line Fully functinal Ijdpoxqy U Hefx Akpotn Still in operation Line Consisted With : Loading - Gas Heated Hardening Furnace (1988)- Oil Tank - Rare Washing Machine - Loading Unit For Tempering - Electrically Heated Tempering Furnace (20xx) - Blackning Tank - Dryer Protection Gas : Nitrogen / Methanol

Year of construction: 1991, condition: excellent (used), functionality: fully functional, 250kg/h Capacity Gas Heated Kohnle Heat Treatment Line Fully functinal Itjdpfx Akoxqy Itopen Still in operation Line Consisted With : Loading - Gas Heated Hardening Furnace (1991)- Oil Tank - Rare Washing Machine - Loading Unit For Tempering - Electrically Heated Tempering Furnace (Industrial Ofenbau 2007) - Blackning Tank Protection Gas : Nitrogen / Methanol

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Oil heating power : 35KW Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Itedpfxsu A Tf Dj Akpsn Few hours of use

Year of construction: 2010, condition: refurbished (used), Vacuum furnace for heat treatment of metals with a molybdenum chamber. A high vacuum of 10^-6 mbar is achieved in the furnace. Maximum operating temperature 1300 C. Dimensions of the working chamber: 0.35 x 0.42 m diameter x height. Ioden Snx Hspfx Akpotn Molybdenum heating chamber. Closed circuit cooling system with a buffer tank Pumping system with a mechanical and turbomolecular pump. Ability to perform processes: • Annealing in high vacuum • Stress relief • Vacuum brazing • Vacuum brazing • etc. The stove is 100% functional after modernization. Sales with installation and commissioning at the customer's place. The final price depends on the scope of modernization, agreed individually with the client. If you have any questions, please contact us.

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Itodsuhmacopfx Akpsn Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Ijdpfxeiryyas Akpstn Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: excellent (used), Large size blastroom for surface preperation and finishing large workpieces Iodoygk S Nspfx Akpjtn 4 shotblasting units Filtration system NEON Lightning 250 W Automatic front door Service door in BMS System Smooth control by means RACK system 2 Abrasive operator system 2 Opperator platform with basket 2 Magic Blast Controllers 4 ACF Shotblasters SV206 with 205Liter Schneider MAGELIS opperator display control panel Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Itodoz Arh Aspfx Akpjn Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Year of construction: 2006, condition: good (used), machine/vehicle number: 3206, HEAT TREATMENT FURNACES CMS ITALIA model DMH 7, MFG: 2006, serial no. 3206 - installed power 15Kw - supply voltage 220V - maximum temperature 1000 °C; - useful width 450 mm - useful height 250 mm Itedpfx Aoldfgpjkpsn - room depth 800 mm - current absorption 39.5 A - frequency 50 Hz Price Euro 4.300 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. Itedpfez Iqrnex Akpen The machine is being sold as is.

Condition: used, Year of construction: 2011, functionality: fully functional, total length: 8,310 mm, total width: 1,641 mm, total height: 1,824 mm, overall weight: 2,100 kg, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 5.3 kW (7.21 HP), pressure: 1 bar, number of injections: 6, temperature: 300 °C, Title for MachineSeeker Ijdpfxozn Ht De Akpjtn AFO Heat AFOGRILL-6B-600 industrial gas-fired infrared grill – 2011 Sales Description For sale: AFO Heat AFOGRILL-6B-600, an industrial gas-fired infrared grill for the continuous grilling, browning, and heating of food products. The machine is equipped with 6 infrared gas burners, each with a thermal output of 46 kW. The total installed thermal output is therefore 276 kW. This grill is suitable for industrial food production and can be used, among other things, for meat products, hamburgers, chicken products, kebabs, and similar products. Technical Specifications Manufacturer: AFO Heat NV Model/Type: AFOGRILL-6B-600 Year of Manufacture: 2011 Serial Number: K015 Number of Burners: 6 Thermal Output: 6 × 46 kW Total Thermal Output: 276 kW Electrical Power: 5.3 kW Supply Voltage: 3 × 400 V + N + PE Required Gas Pressure: 20 to 100 mbar Machine Weight: approximately 2,100 kg Construction: stainless steel CE Marking: present The AFOGRILL is designed for professional and industrial applications where uniform and powerful heat treatment is necessary. Thanks to the infrared gas technology, the product can be grilled quickly and given an attractive color and grill pattern. Dimensions, belt speed, capacity, type of gas used, and other information are available upon request. Short version AFO Heat AFOGRILL-6B-600 industrial infrared gas grill, year of manufacture 2011. Equipped with 6 burners, each with 46 kW, for a total thermal output of 276 kW. Electrical power 5.3 kW, connection 3 × 400 V + N + PE, gas pressure 20–100 mbar, and weight approximately 2,100 kg. Stainless steel construction with CE marking. Suitable for the continuous grilling and browning of meat, chicken, and other food products.

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Ijdpfx Akszrg T Ejpstn Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Ijdpfx Asz I Iv Rokpetn Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Ijdpfx Aoz D Uguekpetn Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Itjdpfx Aksz Ru Erepon Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Iedpfx Aksz Ruxlspjtn Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Cooling: Yes Heating: Yes Temperatures: Depending on Connection Feed Pump: Mono Pump for Viscous Products CIP: This is cleaned through the CIP system Tube in Tube Legth: 13 meters including bends

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Itedpfxszi Hchs Akpsn Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Iedpfez D Ihfjx Akpstn

Condition: excellent (used), Nordson Hot Melt Heated Hoses Itodswuqfyspfx Akpsn 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition

Year of construction: 2021, condition: used, Alfa Laval T10 Plate Heat Exchanger Industrial Alfa Laval gasketed plate heat exchanger, suitable for efficient heat transfer in industrial process applications. The unit consists of a plate pack mounted in a heavy-duty Alfa Laval frame with inlet and outlet connections. Product details: Manufacturer: Alfa Laval Type: T10 Itsdez Dix Espfx Akpon Equipment: Gasketed plate heat exchanger Quantity available: 2 units Heavy-duty steel frame Removable plate pack Multiple process connections Industrial configuration Condition: Used industrial surplus Both heat exchangers are available individually or together. The units are currently installed and can be inspected prior to purchase. Location: The Netherlands This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for additional information, dimensions, or to make an offer.

Condition: used, functionality: limited functionality, Technical specifications Manufacturer: Stahl Type: 8220 Design: Industrial furnace / Chamber furnace Condition: Used Further technical data according to the nameplate Equipment Robust and durable construction Electric heating Temperature control for precise processes Good heat distribution in the working chamber Suitable for professional use Application areas Heat treatment of metal parts Annealing and tempering Drying processes Preheating of workpieces Laboratory and testing applications Research and development Unfortunately, 2 rotary knobs are broken, but the potentiometers still work. However, it is unclear what setting they correspond to. This is more suitable for hobbyists. Itodpfxeznv Eie Akpjn