Used Heating Screw for sale (18,845)

Condition: used, Year of construction: 2010, operating hours: 76,256 h, functionality: fully functional, Equipment: type plate available, Frequency-controlled compressor New oil and filters Compair Type: L22SR-7,5A V2 Volume flow: 3.53 m³/min Pressure: max. 10 bar Motor power: 22 kW Year: 12/2010 Operating hours: 76,256 Weight: 355 kg A suitable refrigeration dryer and 2000L compressed air tank can be purchased separately. The machine can be demonstrated under power on site. Nedpfowvac Rsx Aa Ejwr All information provided without guarantee. Errors and interim sale excepted.

Condition: excellent (used), Year of construction: 2018, operating hours: 17,555 h, functionality: fully functional, Atlas Copco GA110VSD screw compressor. 110 kW with 8.5 bar and 21.60 m³/min. Integrated frequency converter. Njdpox Iu H Usfx Aa Ejwr

Condition: good (used), Year of construction: 1964, pressure 7 t Njdpfxjqy Rn To Aa Ejwr weight 0,9 t 1417

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Njdpfjh Uyg Njx Aa Eewr

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Njdpsx Nxfksfx Aa Eswr Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Year of construction: 1991, condition: used, Technical details: Nwjdpfou N Ak Nox Aa Ejr max. temperature: 1200 Grad size of opening: 450 mm container volume: ca. 80 l working depth: Kammertiefe: 600 mm voltage: 380 V total power requirement: 46 kW weight of the machine ca.: 2,1 t dimensions L x W x H: 1,6 x 1,6 x 1,46 m dimensions electric cabinet: 400 x 600 x 760 mm Electric melting furnace, crucible furnace, tiltable pouring height= 1050mm pouring Ø 80mm lining=chamot Swing out via 2x hydraulic arm Hydraulics: Manufacturer Houch Hildesheim Optionally an additional crucible can be sold, please ask. Size outside: Ø 1240mm x 1000mm Size inside: Ø 840 x 1000mm Volume of contents: approx. 260 liters Slag collection material: circulation Ø center = 940mm, size 50 x 50mm Material = steel is heat resistant *

Condition: excellent (used), Year of construction: 2008, operating hours: 22,795 h, functionality: fully functional, machine/vehicle number: 5039, overall weight: 600 kg, power: 18.5 kW (25.15 HP), type of cooling: air, Equipment: documentation/manual, type plate available, Frequency-controlled screw compressor with integrated heat recovery Manufacturer: Kaeser Type: ASD 32 Delivery rate: 8 bar - 3.2 m³/min Motor power: 18.5 kW Compressed air connection: G 1¼ Max. available thermal output: 16.4 kW Nwsdpfx Aew Trghoa Esr Includes complete documentation + CE certificate Next maintenance at 24,360 operating hours Weight: 600 kg Required space: 1350 x 921 x 1505 mm (L x W x H) The machine can be demonstrated on site. All information subject to change. Prior sale reserved.

Condition: excellent (used), Year of construction: 2016, operating hours: 37,866 h, functionality: fully functional, Screw compressor GA15VSD+FF, 15 kW with 13 bar and 2.51 m3/min. Integrated dryer and frequency converter. New compressor unit in 2022. Nedpex Irt Sofx Aa Eewr

Condition: used, amount of capping heads: 6 Nwjdpfx Aasx Iv Tcs Ejr type of closures: 30 x 60 working direction: left-right

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing Nwjdpou Hik Dofx Aa Eor - Control system

Year of construction: 2016, condition: ready for operation (used), overall weight: 1,100 kg, total height: 1,960 mm, product length (max.): 2,120 mm, screw diameter: 45 mm, General Data Machine weight 1100 kg Measurements height 1960 mm Dimensions Nwsdpfx Aox D Edyja Esr Machine Length 2120 mm Injection Unit Screw diameter 45 mm This Krauss Maffei KME 45 XS single screw extruder was manufactured in 2016. It features a screw diameter of 45 mm and a length of 1350 mm, with a drive power of 23 kW and a maximum speed of 2486 rpm. The machine includes five heating/cooling zones and can handle a maximum air flow of 5 × 630 m³/h. If you are looking to get high quality extrusion capabilities consider the Krauss Maffei KME 45 XS machine we have for sale. Contact us for more information. Application Types Extrusion

Condition: good (used), RAS screw press - Width: 80 cm - Depth: 60 cm - Height: 150 cm - Weight: approx. 250 kg Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Nwedpfxotku Eks Aa Eor Shipping with forwarding agent.

Condition: new, Year of construction: 2023, functionality: fully functional, power: 114 kW (155.00 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 120" heating cannon is a powerful heater suitable for use in warehouses, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are immediately available from stock. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 120 heating unit with oil burner - 1 Roth mobile heating oil tank 1000 L - 1 room thermostat with connection cable Rated heat load: 114 kW Air output: 8050 m³/h Fuel: heating oil EL Fuel consumption: max. 11.2 L/h Flue gas loss: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): approx. 1350 x 920 x 2100 mm Nwsdpfx Aaoxgbbtj Esr Weight: approx. 296 kg The machine can be viewed on site by appointment. All information without guarantee. Subject to prior sale.

Condition: excellent (used), Year of construction: 2012, operating hours: 35,741 h, functionality: fully functional, Screw compressor Atlas Copco GA15VSDFF. Integrated dryer and inverter. 15 kW, 13 bar, 2.91 m3/min. Nwjdsx Igzkjpfx Aa Eer

Condition: good (used), Year of construction: 2000, Screw compressor Manufacturer: Atlas Copco Type: GA 90 Year of construction: 2000 Power: 94 kW Nodevi E Uyepfx Aa Eowr Pressure max: 10 bar Speed: 1,487 rpm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, power: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Year of manufacture 2010 with feed with ash discharge with control Njdpfx Ajx E Auzsa Eswr

Year of construction: 2006, condition: ready for operation (used), Additional Equipment Machine includes an SA 500 extractor built in 2006 and a 6m long cooling section. This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information. Application Types Nwedpfsx D Hcqex Aa Ejr Extrusion

Condition: good (used), Year of construction: 2023, machine/vehicle number: 231293, Offer 25452 Technical data: - Operating hours: 754 h - Working pressure: up to 13 bar - Delivery rate: 860 l/min - Drive: 400 V / 7.5 kW - Galvanised air receiver: 500 l - Integrated dryer RENNER Type RKT + 0065 Nedpex I Izrofx Aa Ejwr - Automatic condensate drain - Required space: approx. W 650 x H 1650 x D 1400 mm - Weight: approx. 350 kg

Condition: new, Year of construction: 2023, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a high-performance heater suitable for use in halls, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are in stock for immediate delivery. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 150 heater with oil burner - 1 Roth mobile heating oil tank, 1000 L - 1 Room thermostat with connecting cable Nwedpsxli I Sofx Aa Esr Nominal heat load: 150 kW Air output: 9710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas losses: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Condition: excellent (used), Year of construction: 2013, operating hours: 18,281 h, functionality: fully functional, Kaeser SM12 screw compressor, 7.5 kW, with 8 bar and 1.20 m3/min. Excellent condition. Nwsdpfxox Hyyke Aa Esr

Year of construction: 1999, condition: good (used), Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering Nwjdpfx Aexy I Hpoa Eor -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 5088, spindle bore: 25 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total height: 1,300 mm, total length: 1,200 mm, total width: 800 mm, overall weight: 700 kg, WEILER PRIMUS GS Lead and Feed Screw Lathe Nwedpfx Aasx Ekm Es Eor - Operating voltage: 380 V - Control voltage: 220 V - Power connection: 2 kW - Rated current: 4.1 A - Frequency: 50 Hz - Distance between centers: 450 mm - Center height over bed: 130 mm - Swing over bed: 260 mm - Center height over cross slide: 70 mm - Swing over cross slide: 140 mm The machine is equipped with a tailstock, a Multifix quick-change tool post, and a three-jaw chuck by RÖHM, diameter 120 mm. Comes complete with a matching workshop cabinet and appropriate accessories. This item comes from a training workshop. FCA D-73235 Weilheim Teck, loaded onto truck.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: M60I/9033, Offer Number: M60I/9033 Machinetype: screw washing machine Make: MIKO Nwjdpjx Igf Nsfx Aa Eer Type: Constr. year: 1994 capacity: Location: Germany

Condition: used, mileage: 60,000 km, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, loading space length: 4,700 mm, loading space width: 2,200 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, navigation system, tail-lift, Transmission: 6 gears, Manual gearbox Year of manufacture: 2020 Suspension: leaf suspension Front axle: Steering Empty weight: 2.990 kg Carrying capacity: 1.510 kg GVW: 4.500 kg Tail lift: Zepro Radiografisch, tail lift, 750 kg Nodsx Da E Sspfx Aa Eewr Sub Woofer

Condition: good (used), Year of construction: 2008, Lead and feed screw lathe OPTIMUM D560x1500 - CE certification - Year of manufacture: 2008 - 3-axis digital readout - Center height: 280 mm - Swing over bed: 560 mm - Swing over cross slide: 355 mm - Swing in the gap: 790 mm - Distance between centers: 1500 mm - Spindle bore: 55 mm - Speed range / gearbox: 25 - 1600 rpm - Feed rates / longitudinal: 0.059 - 1.646 mm/rev - Feed rates / cross: 0.02 - 0.537 mm/rev - Tailstock MT5 / quill travel: 180 mm - 3-jaw chuck: 300 mm + reversible jaws Nwjdpfx Aaex I Ni Ds Ejr - Quick-change toolholder with inserts - Coolant system - Drive power: 7.5 kW - Documentation Dimensions (LxWxH): 3 x 1.4 x 1.7 meters / Weight: 2300 kg Subject to errors and input mistakes.