Used Heating Element for sale (16,587)

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,100 °C, overall weight: 1,700 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Electric car-bottom furnace for heat treatments on steels (normalizing, annealing, tempering, preheating, etc.) by Pagnotta Termomeccanica srl, Deruta, Italy. Maximum temperature: 1,100°C Usable loading dimensions: 1,250x800xh1,000 mm Capacity: 1,000 liters Hodpfx Ajzxxkvokiew CE Declaration of Conformity Used and refurbished machine with new electric heating elements The listed specifications are for informational purposes only; the photos depict similar machines. The furnace can be customized according to your specific heat treatment process.

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Hedpfx Aksz Arh Ajiew Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: used, This listing is for a Techne Dri-block DB3 Heat Block . The unit is in full working condition and is ready for immediate release. The Techne Dri-Block Heater DB-3 is a highly efficient laboratory-grade heating device designed to offer precise temperature control for a variety of applications. Its robust features make it ideal for researchers and laboratory personnel seeking reliable heating solutions. Key Features: Temperature Range: The Dri-Block Heater DB-3 operates within a range from ambient temperature to 100°C (32°F to 212°F), accommodating a wide variety of heating needs. Fast Heat-Up Rate: The device can heat from 30°C to 100°C in approximately 15 minutes, reducing waiting time and increasing efficiency in laboratory workflows. Temperature Stability: It boasts impressive stability specifications, with a temperature accuracy of ±0.1°C at 40°C and ±0.15°C at 100°C. This precision is critical for experiments requiring exact temperature conditions. Temperature Setting: The user-friendly interface consists of three push-button controls paired with a 4-digit LED display, allowing users to set temperatures with a 0.1°C resolution for fine-tuning. Max Temperature Variation: Designed for uniform heating, the maximum temperature variation is limited to 0.2°C between blocks at 40°C, ensuring consistent results across different samples. Number of Blocks: The Dri-Block Heater can accommodate up to three aluminium alloy insert blocks, enabling simultaneous heating of multiple samples or different types of samples. Overall Size: The compact dimensions of the DB-3 are 279 x 260 x 105 mm (L x W x H), making it suitable for space-constrained laboratory environments while still providing ample heating capacity. Applications: The Techne Dri-Block Heater DB-3 is versatile and can be used for a range of laboratory and research applications, including: Incubation: Ideal for incubating biological samples under controlled temperatures. Boiling: Suitable for processes requiring boiling solutions efficiently. Inactivation: Useful for inactivating enzymes or pathogens in samples. Wet Ashing: A useful tool in sample preparation for elemental analysis. Sample Concentration: Facilitates concentrating samples by gentle heating. Enzyme Analysis: Maintains specific temperature conditions for enzyme studies. Nucleic Acid Hybridizations: Supports temperature-controlled hybridization necessary for nucleic acid experiments. Key Benefits: Hsdpfx Akexxz N Ioiow Precise Temperature Control: The high degree of control and stability ensures reliable results. Fast Heat-Up Rate: Saves time in laboratory procedures, enhancing productivity. High Temperature Stability: Reduces variability in experimental conditions, leading to more accurate outcomes. Lightweight and Compact Design: Fits conveniently in various lab settings, preserving valuable workspace. Accepts Multiple Insert Blocks: Increases versatility by allowing customization based on specific protocols or sample types.

Condition: good (used), electric heating, electric radiator, heating coil, electric tubular heating element -Power: 600 watts, 120 volts -Width: 400 mm -Height: 100 mm -Depth: 250 mm -Number: 11 available -Price: per piece Hedpfxob S Hr So Akijw -Weight: 4 kg

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press Hodszi Hchopfx Akiew BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: used, KMA Heat Exchanger and Pumping Station Hedpfx Akoym Dx Aeiew

Condition: used, mileage: 26,750 km, power: 120 kW (163.15 HP), color: gold, gearing type: automatic, Equipment: air conditioning, airbag, central locking, power assisted steering, seat heater, - Passenger airbag - Electric window lift – left - Electric window lift – right - Driver airbag - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Hodpfx Aksy Uqyweisw B25 Electric parking brake, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CF7 Comfort chassis, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and trim parts painted in vehicle color, CU4 Aerodynamics package, D14 Anodized roof rails, E07 Hill-start assist, E1D Digital radio (DAB), E1T Touchpad, E4S Smartphone Integration Package, E7B Pre-installation for navigation, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in trunk / cargo area, ET4 Active Distance Assist DISTRONIC, F1O Center console with storage compartment + cup holder, central design, F2W Winter package, F3Z Comfort closing, F48 Heating for windshield washer system, F61 Interior mirror, F66 Lockable glove compartment, F69 Exterior mirrors, electrically adjustable and heated, with integrated turn signal, FH0 Decorative elements in piano lacquer look, black, FS5 Illuminated mirrors for sun visors, G43 9G-TRONIC, H00 Warm air duct to passenger compartment, H12 Auxiliary hot water heater, H15 Seat heating for passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, HZ7 Climate control system, semi-automatic, TEMPMATIC in the rear, IN2 Wheelbase 3200 mm, long overhang, J55 Seat belt warning system for passenger seat, JA7 Blind Spot Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JH0 Widescreen Cockpit, JH3 Communication module (LTE) for digital services, JP1 PRE-SAFE, JS2 Intelligent Speed Assist, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, K51 Protection against incorrect fueling, KB5 Main tank 70 liters, LA2 Driving light assistant, LB9 Exit lights, LC3 Lighting in the grab handle, rear, LC4 Comfort roof control unit, LC7 Lighting for footwell, front, LC8 Ambient lighting, tailgate, LE1 Adaptive brake light, LE6 Night lighting, rear, MJ8 ECO Start-Stop function, MO5 EMISSION CLASS EURO 6e RDE5 M/N1 GR. II, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, Q50 Trailer coupling, ball head removable, QA4 Trailer load 2500 kg, R21 Wheel size group 1, RG7 Tires 225/55 R17, RK8 Light alloy wheels 7 J x 17, 20-spoke design, RY2 Tire pressure monitoring system on front and rear axle, wireless, S09 Passenger seat, standard, S37 Armrests, outer, for single seats, 2nd row seats, SA3 Center airbag, SA6 Airbag, passenger, SB1 Comfort driver's seat, SH1 Thorax-pelvis sidebag, driver, SH2 Thorax-pelvis sidebag, passenger, SH8 Windowbags for driver, passenger and in the rear, SK2 Seat occupancy recognition, driver's seat, SK5 Automatic deactivation of passenger airbag, SK6 Child recognition in the vehicle, passive, T14 Active door lock for sliding door, T19 Sliding door, left, T70 Child safety lock on doors in passenger compartment, T74 Grab handle for entry, U73 Armrests for seating in passenger compartment, UR1 Seat rail system with quick-release mechanism, US6 Single seat, 1st row, left, US7 Single seat, 1st row, right, US8 Single seat, 2nd row, left, US9 Single seat, 2nd row, right, V33 Carpet in the rear, V36 Headliner, V44

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition Hodewuqfyjpfx Akiow

Condition: good (used), Year of construction: 2017, functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Designed for warming components, equipped with a carousel handling system and control cabinet. Also suitable for drying or dehydrating food and cannabis. The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Hsdpfxsup R U Uj Akijw Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Condition: used, Heated Chocolate Mixing Tanks Qty 2 available Stainless steel Hedpfx Aoxtqx Uskisw

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Price € 7,995.00 Hodpfx Akjz D Uguoijw Quantity 2 machines available Shipping can be arranged for the buyer

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Hjdpfxez Iww Rs Akisw Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, A used Hanagata Heat Shrink Tunnel - compact size Hodpfxsyz Uzxs Akijw

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Hodpjz D Ihfsfx Akijw

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. Hsdpfx Ajzrg T Eekiow The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Year of construction: 2017, condition: good (used), Spirax Sarco PHS Easiheat Heat exchanger system 2017, Pre assembled skid mounted packaged heat exchanger system, touch screen control, with Alfa Laval heat exchanger, see plates for all spec Hedpfx Aez I Dv Hskijw

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V Hjdoz Hngmepfx Akijw • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31.064-R-11/2022, overall weight: 1,200 kg, heating capacity: 49 kW (66.62 HP), total height: 2,090 mm, total length: 2,270 mm, total width: 780 mm, Equipment: documentation/manual, Offering a used Optimal E Gr.II-S hot air furnace. Sale due to workshop restructuring. Heating capacity, special version: 49 kW. Cleaning side on the right – with automatic control. - Complies with 1st Federal Immission Control Ordinance (BlmSchV) – Stage 2!!! Hjdpjzy R Rdofx Akisw - Suitable for rooms according to DIN, up to 700-1250 cubic meters. - According to the Federal Immission Control Ordinance (BlmSchV), approved for particleboard or coated wood-based materials (only in woodworking or wood processing companies). Fine sawdust or dust of any kind is not suitable – risk of deflagration!!! - Furnace consumption: approx. 15 - 25 kg/h. - Tested in accordance with DIN EN 13240: 2005-10 (continuous operation), DIN EN 13229:2005-10, DIN EN 303-5:2012-10. Sale does not include the stainless steel chimney.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: AA2328995, total height: 2,495 mm, total width: 2,280 mm, total length: 10,500 mm, overall weight: 6,000 kg, Equipment: documentation/manual, For sale is a dry cooler (air-cooled liquid cooler with forced convection) designed for outdoor installation. Air is passed over the finned heat exchanger, which contains the working fluid, for example, a water-glycol mixture. Alfa Laval VDDSE1008.1CD96 C4 ICM Dimensions approximately 10.5m x 2.28m x 2.95m (no heavy-duty transport required for transportation) Weight approximately 6 tons Hedpfez S U Naex Akiew Cooling capacity 866.8 kW Airflow: 217476 m³/h Volume flow rate of cooling medium: 150.8 m³/h A cooling unit is being sold – it has already been dismantled and is ready for loading. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Hjdpoz Ru Erefx Akiow Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: new, Unused Alfa Laval model AQ4T-BFG approximately 15sqmt heat transfer area 316L stainless steel plate heat exchanger. Unit rated 12 bar design pressure at 150 deg.c. Hjdpe Agvzwjfx Akiew

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Hodpfx Ajzc Hkyekiew

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Hsdpfx Asz Ehc Eskisw Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heating unit, cooling unit, electric heating. SINGLE type STW 180/1-36-100-S Serial No.: 130569 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal filling volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Hedpfx Aj Agw Erjkisw Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 volts, 50 Hz, with 63 amp CEE plug - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: good (used), Year of construction: 2019, heating cooling device GWK teco tt 50.08 WT2 300°C oil 8 kW year: 2019 Hsdpfx Akj Aba Eqoijw price: 4.200 € contact: Mr. Rainer Eckerle