Used Haas Vf 0 for sale (216)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,775 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine. • Capacities (S.A.E / Metric) • Chuck size: 10.0 in (254 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BMT65 turret): 13.75 in (349 mm) • Max cutting length (varies with workholding): 32.5 in (826 mm) • Bar capacity: 3.00 in (76 mm) • Between centers: 32.5 in (826 mm) • Feedrates (S.A.E / Metric) • Rapids on X: 472 ipm (12.0 m/min) • Rapids on Y: 472 ipm (12.0 m/min) Dedpfx Ahezhwx Degjkp • Rapids on Z: 945 ipm (24.0 m/min) • Axis Motors (S.A.E / Metric) • Max thrust X: 4100 lbf (18,238 N) • Max thrust Y: 2300 lbf (10,231 N) • Max thrust Z: 5100 lbf (22,686 N) • Main Spindle (S.A.E / Metric) • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275.0 ft-lbf @ 500 rpm (373.0 Nm @ 500 rpm) • Draw tube bore: ø 3.0 in (76 mm) • Spindle bore: ø 3.50 in (88.9 mm) • Main Spindle C Axis (S.A.E / Metric) • Max speed: 60 rpm • Max rating: 5.0 hp (3.7 kW) • Positioning (±): 0.01° • Brake diameter: 13.9 in (353 mm) • Brake holding torque: 250 ft-lbf (339 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle (S.A.E / Metric) • Chuck size: 8.3 in (210 mm) • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp (11.2 kW) • Max speed: 4000 rpm • Max torque: 100.0 ft-lbf @ 870 rpm (135.6 Nm @ 870 rpm) • Spindle bore ø (non-through): 0.81 in (20.7 mm) • Secondary Spindle C Axis (S.A.E / Metric) • Max rating: 5.0 hp (3.7 kW) • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in (216 mm) • Brake holding torque: 140 ft-lbf (190 Nm) • Control type: Interpolated motion and positioning • Secondary Spindle Positioning (M119) (S.A.E / Metric) • Positioning (±): 0.02° • Brake diameter: 8.5 in (216 mm) • Control type: Positioning only • Turret (S.A.E / Metric) • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in (102.0 mm) • Live Tooling (S.A.E / Metric) • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General (S.A.E / Metric) • Coolant capacity: 55 gal (208 L) • Air Requirements (S.A.E / Metric) • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Air pressure min: 80 psi (5.5 bar) • Electrical Specification (S.A.E / Metric) • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp (22.4 kW) • Input AC voltage (3 phase) - Low: 220 VAC; Full load amps (Low): 70 A • Input AC voltage (3 phase) - High*: 440 VAC; Full load amps (High*): 35 A • Dimensions - Shipping (S.A.E / Metric) • Domestic pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) • Export pallet: 171 in x 90 in x 98 in (434 cm x 229 cm x 249 cm) Additional equipment • Bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, overall weight: 7,000 kg, controller manufacturer: HAAS, number of axes: 3, This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details. • Configuration: 3-axis machine with driven tools; no counter spindle • Spindle bore: 103 mm • Chuck diameter: 315 mm • Max turning diameter: 406 mm • Max turning diameter over saddle: 368 mm • Max turning length: 864 mm • Tool turret capacity: 12 positions • Live tooling: Yes Additional equipment • Included tooling: 1 live tool + additional accessories (unspecified) Dedpfx Aszhwlqshgskp Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2011, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 406mm, 660mm maximum cutting length, 51mm Bar capacity main spindle, 30Hp 4,000rpm main spindle speed, Sub-spindle speed 4,000rpm, 20Hp power, milling speed 6,000rpm, 12 Station turret, swarf conveyor, tool setter, coolant Dkedpfx Ahoy Tkabjgjp

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Z 500 mm 10.000 rpm Dkodpfxewx Rafo Ahgop

Condition: excellent (used), Year of construction: 2016, With B + C axis Working travels 762 x 508 x 508 mm Table diameter 500 mm Spindle taper 40 Spindle speeds -12'000 rpm Dodpfx Ahelhqydjgjkp Tool changer 40 Pos. Control HAAS Coolant through spindle Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Dkjdpfsyrrx Usx Ahgop Lighting Enclosed guarding

Condition: like new (used), Year of construction: 2024, operating hours: 550 h, functionality: fully functional, machine/vehicle number: 1209102, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller manufacturer: Haas, controller model: NGC, spindle speed (max.): 12,000 rpm, spindle motor power: 22 W, spindle nose: CT 40, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, Haas VF-4SS-EU vertical machining center (Super Speed), installed in October 2024, FIRST OWNER, available due to a workshop reorganization. Very low usage: only 550 hours powered-on since installation (estimated ~150 spindle hours). Like-new condition, near-complete 5-axis configuration. Can be seen in operation by appointment. — MACHINE SPECIFICATIONS — • Travels X/Y/Z: 1270 x 508 x 635 mm • Table: 1321 x 457 mm • Super Speed spindle, 12,000 rpm, inline direct drive, taper 40 • Spindle power: 22.4 kW (30 hp) • Rapid traverse rates: 35.6 m/min • Side-mount tool changer (SMTC): 24+1 tools • Haas control (124 power-ons / 1317 tool changes) — SOFTWARE OPTIONS (all enabled) — • Full 5-axis package: TCPC + DWO, 4th and 5th axis enabled • High-speed machining (HSM) • Rigid tapping • M19 spindle orientation Djdpfx Aszgt Tnehgjkp • Compensation tables • Macros, rotation and scaling • VPS editing, media display • 1 GB memory, wireless networking • Through-spindle coolant, high pressure (TSC) — PHYSICAL EQUIPMENT — • Haas TRT210 5-axis trunnion/rotary table (dual-axis), like new • Renishaw probing system (part + tool setting) • Through-spindle coolant (TSC) + through-spindle air blast • Programmable coolant nozzle (P-Cool) • Oil mist extractor/condenser • Automatic coolant refill — TOOLING & WORKHOLDING INCLUDED — • 2x Lang zero-point clamping systems • 2x WNT vises + 3x Haas vises • Set of tool holders + set of tools — TERMS — • Net price (plus VAT) — company invoice. • Inspection and machining test by appointment. • Collection on site in Metz (57), France. • Removal and transport entirely at buyer's expense: no handling equipment on site, bring your own lifting/loading gear and carrier. Contact by message to arrange a visit.

Condition: excellent (used), Year of construction: 2013, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 533mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle speed, Dksdpfxsy Ex T Ts Ahgjp 6,000rpm milling speed, 12 Station turret, parts catcher, tailstock, tool setter, coolant

Condition: good (used), Parts on table not come. Marked with red. Dedpfx Ahjwxdyxjgekp

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Dksdpfsypv T Rex Ahgsp Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Weight: 20,800 kg

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous Dedpfxoy Tp Hge Ahgjkp - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant Dsdpfxox Nf Tbe Ahgokp x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: excellent (used), Year of construction: 2017, table load: 200 kg, table length: 650 mm, overall weight: 240 kg, table height: 400 mm, Horizontal work load 200 Kg Dsdoyu Nb Espfx Ahgskp Vertical work load 100 Kg Torq 407 Nm Runout 0.025 mm Gear Ratio 72:1 Timing 2:1 incl. Tailstock MK 4 incl. Driver incl. Cable   Table Ø: 315mm Table load: 200 Rotation B-Axis: 0.001° Rotation speed B-Axis:4500Omw/min. Length: 650mm Width: 250mm Height: 400mm Weight: 240kg

Condition: good (used), Year of construction: 2011, Swing 806mm, maximum cutting diameter 533mm, Dodpfxsywuvho Ahgskp 762mm between centres, 660mm maximum cutting length, 76mm Bar capacity, 254mm 3 jaw chuck, 22.4kW Spindle Motor, 3400rpm spindle, 12 Station turret, tailstock, coolant, tool setter.

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Dkodpfx Ahev N Di Aogjp Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, Equipment: chip conveyor, documentation/manual, Machine in perfect working order; installation can be arranged by the seller. Dkedpfxjzgx I De Ahgsp

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Dkodozd Tcdspfx Ahgjp Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: used, Year of construction: 2007, Technical details: turning diameter over bed: 762 mm turning length: 850 mm facing movement (x-axis): 287 mm longitudinal traverse (z-axis): 864 mm Djdpjvvt Emofx Ahgokp control: CNC Haas spindle passage: 76 mm revolution per minute: max. 3400 steples U/min tailstock taper ISO: Ø 290 tailstock quill stroke: ja mm tool turret - number of stations: 12 electrics - voltage/frequency: 360/ 400 V - 50-60 Hz V/Hz Weight approx.: 6,3 t transport measurements machine: ca. 3,4 x 2,1 x 2,4 m Equipment: 3-jaw power chuck KITAKAWA Ø 250 mm (without jaws) 4200 rpm. Operable via 2-position foot switch. Tool turret with powered tools available. Electric coolant system provided. Tool measuring system available. I.D. *

Condition: used, Year of construction: 2021, operating hours: 10,825 h, functionality: fully functional, machine/vehicle number: 1179152, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece length (max.): 600 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 400 mm, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 3,748 h, coolant supply: 21 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, Haas UMC-500SS 5-Axis CNC Machining Centre – 2022 For sale: used Haas UMC-500SS 5-axis CNC machining centre, purchased and commissioned in 2022. The machine is currently installed in a production facility, connected to power and available for inspection and test run by prior appointment. It has recently undergone maintenance/inspection and is in working condition. Dodpfx Ahezi D D Aegskp Basic data: Manufacturer: Haas Model: UMC-500SS Year of purchase / commissioning: 2022 Serial number: 1179152 Machine type: 5-axis CNC machining centre Taper: SK40 / 40 taper Spindle speed: 15,000 rpm Tool magazine: min. 30 positions Working range: approx. 600 × 400 × 400 mm Tilting rotary table: approx. Ø 400 mm B-axis travel: +120° / -35° C-axis: 360°, continuous rotation Current machine counters as of JULY 06, 2026: Cycle Time: 7,432 h Power On Time: 10,825 h Servo Time: 9,557 h Feed Time: 5,052 h Main Spindle Total Usage: 3,748 h Number of tool changes: 260,739 Equipment / options include: Through-spindle coolant, 21 bar Chip conveyor Renishaw probing system: workpiece probe and tool probe Additional compressed-air blow-off for the machining area High-speed / 3D contour machining option Dynamic work offset / dynamic zero-point tracking for 4-axis and 5-axis machining Rigid tapping without compensation holder USB and Ethernet connection Oil mist extractor, 1800 m³/h, with HEPA frame and HEPA filter Aluminium pyramid fixture for mounting centric vices on 5-axis machines Condition and availability: The machine is used, operational and still working in a production environment. It can be inspected in Kraków, Poland, and tested under power after prior arrangement. Sale on VAT invoice. The price is reasonably negotiable after inspection of the machine. Important note: The sale does not include some tooling and accessories that remain with the seller, including, among others, centric vices, Zero-Point plate, choiceed holders, arbors and collets. The exact scope of included equipment must be agreed before purchase. Transport, dismantling and loading conditions to be agreed with the buyer. Please contact us for further details, inspection appointment or purchase discussion.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Dodpfx Aovwz T Ujhgskp

Condition: excellent (used), Year of construction: 2008, HAAS SL20 CNC lathe with C-axis Year: 2008 Technical details: HAAS control Maximum turning length (Z-axis): 610 mm Maximum turning diameter over bed: 262 mm C-axis with driven tools Spindle power: 14,7 kW Vector Drive Spindle bore diameter: 51 mm Max spindle speed: 4000 rpm Number of turrets: 1 Number of tools in turret: 10 Spindle nose A2-6 Tailstock Weight approx. 4800 kgs Dimensions (L x W x H): 2600 x 1700 x 1800 mm Accessories/options: - C-axis and driven tools - Static tool holders - Driven tool holders - Servo bar barfeeder - Swarf auger Dodozf Rrropfx Ahgokp - Coolant system - Tailstock - Tool measuring arm - Hydraulic 3-jaw chuck - Collet type chuck - Foot pedals Dust extractor is not included.

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, max table weight 300kg, Dodskticxopfx Ahgokp table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Additional equipment Dkjdpfjx D Ezfsx Ahgep • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Technical Machine Benefits • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm • Type: vdi turret with 12 tool stations • Type: programmable hydraulic tailstock • Preparation for robot / driven toolschip conveyor and tool measurement are includedOPTIONAL: Tool holders at an additional cost. See pictures attached

Condition: ready for operation (used), General Machine Data Manufacturer: HAAS Model: SL-20 THE Machine Type: CNC Turning Center Year of Manufacture: 2008 Control System: HAAS CNC Working Area: Dsdpfxezkmbas Ahgjkp Max. Turning Diameter: 262 mm Max. Turning Length: 508 mm Max. Turning Length Between Centers: 610 mm Swinging Diameter over Front Apron: approx. 584 mm Swinging Diameter over Cross Slide: approx. 241 mm Main Spindle: Max. Spindle Speed: 4,000 RPM Spindle Drive Power: 15 kW / 20 HP Spindle Nose: A2-6 Spindle Bore: approx. 76 mm Max. Bar Diameter: approx. 51–52 mm Chuck Diameter: approx. 210 mm Axes and Travels: X-Axis Travel: 215 mm Z-Axis Travel: 508 mm Rapid Traverse X-Axis: approx. 30.5 m/min Rapid Traverse Z-Axis: approx. 30.5 m/min C-Axis and Driven Tools Tool Turret: Number of Tool Stations: 10 Turret Type: Disc Turret Driven Tool Stations: Available Tailstock: Hydraulic Tailstock Programmable Tailstock Function Bar Feeder: BREUNING IRCO ILS-RBK Machine Dimensions and Weight: Machine Width: approx. 1,575 mm Machine Height: approx. 1,830 mm Machine Length: approx. 3,200 mm Machine Weight: approx. 4,100 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, HAAS ST-40L CNC lathe, year of manufacture 2016, C-axis, driven tools, tailstock, steady rest, extended bed The machine is equipped with a C-axis, driven tools, programmable tailstock, Kitagawa hydraulic steady rest, chip conveyor, and accessories. The machine is powered on and available for testing by appointment. Machine basic specifications: Manufacturer: HAAS Automation, Inc. Model: ST-40L Year of manufacture: 01/2016 Serial number: 3104909 Control system: HAAS CNC Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 14,062 kg Design: extended bed ST-40L Technical parameters: Max. swing diameter over bed: 876 mm Max. turning diameter: 648 mm Max. turning length: 2,032 mm X-axis travel: 432 mm Z-axis travel: 2,032 mm Dksdpjzgv E Hsfx Ahgsp Work travel X/Z: 18 / 8.1 m/min Rapid traverse X/Z: 18 / 8.1 m/min Positioning accuracy: 0.005 mm Repeatability: 0.003 mm Spindle Spindle: A2-8 Spindle bore: 102 mm Spindle bore diameter: 117 mm Max. spindle speed: 2,400 rpm Spindle power: 30 kW / 40 HP Torque: 1,898 Nm at 150 rpm Chuck: hydraulic 3-jaw Kitagawa B15, diameter 381 mm Turret and driven tools Turret: 12-position combined turret Tool clamping: 6× VDI 40 / 6× BOT Driven positions: every other position in the turret Tool drive: yes C-axis in the spindle: yes Max. speed of driven tools: 0–6,000 rpm Power of driven tools: 9.3 kW C-axis positioning: 0.001° Continuously controlled C-axis in the spindle: yes Tailstock and steady rest Programmable tailstock: yes, servo-controlled Tailstock taper: MK5 Tailstock clamping force: 1,334–6,672 N Hydraulic steady rest: Kitagawa 1131 Steady rest range: 110–310 mm Separate oil lubrication for the steady rest: yes Max. steady rest speed: 650 rpm Max. clamping force of the steady rest roller: 20 kN Machine equipment The machine is equipped with: HAAS CNC control system, C-axis, driven tools, 12-position turret with 6× VDI / 6× BOT, programmable tailstock, Kitagawa 1131 hydraulic steady rest, Kitagawa B15 hydraulic chuck, chip conveyor, cooling unit, automatic central lubrication, manual spray gun for coolant, manual air blow gun, remote jog handle, USB port, work area lighting, set of tool holders and accessories. Accessories The machine comes with accessories as shown in the photos, including: ER32 driven tool holders, VDI/BOT tool holders, set of hard jaws for Kitagawa B15 chuck, additional jaws, sleeves and clamping elements. Operating hours According to the display on the control system: Cycle start time: approx. 7,208 h Cutting time with feed: approx. 5,989 h Machine condition The machine is currently in operation and powered on. Inspection and testing are possible by appointment. The technical condition corresponds to the normal operation of a used machine.