Used Haas St for sale (248)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Application Types Milling Hsdpfjx D Dzwox Ag Ujng

Year of construction: 2022, condition: used, Manufacturer : Buhler Haas-Mondomix B.V. Model: HAKA type VA-15L Year : 2022 Type : Foam / Aerator mixer Previous application : Application : Whipped cream Production capacity : 100 kg/hr nominal Input density : 1,0 kg/l Output density: 0.6 – 0.8 kg/l   Near as new condition. Unit consisting of : – Pre-mixer PCM 400 litres Capacity: 400 litres Design: conical bottom Lid with hinged access for manual loading of ingredients Jacketed, insulated and protected tank Stirrer: cutting blade + Teflon scrapers PT100 temperature sensor – HALA type dispensing pump with frequency converter Volumetric pump with frequency converter Jacketed design Mass flow meter with regulator – HAKA VA-15L type continuous aerator Rotor / stator with 912×5 mm square lugs Effective volume 2 ltrs Mixing head stator Double-walled front and rear plate for cooling Rotor designed for cooling Temperature sensors Hnodpfsx R A Rtex Ag Ujg Jacketed piping 7.5 kW direct drive motor, frequency converter controlled Air injection: manual or automatic with mass flow meter Automatic pressure control and regulation Cabinet + PLC, Siemens S7 type – HANB cold water production unit Autonomous chilled water unit (thermoregulation) for cooling the expansion head tank Water temperature between 5°C-20°C Spiral heat exchanger / Centrifugal pump / Closed water tank – CIP Easy Clean system for easy cleaning Stainless steel platform supporting all equipment

Condition: used, Year of construction: 2012, x-travel 762 mm y-travel 508 mm z-travel 508 mm Hnsdpfx Ajxddrpsg Usg Control Haas CNC Max. rpm 12.000 min/-1 power capacity - main spindel 22,4 kW max. Torque 102 Nm tool taper ISO 40 table surface area 914 x 457 mm T-slots 16 mm max. table load 1362 kg number of toolpositions 24 pos. tool taper SK 40 max. tool diameter 76 (152) mm max. tool weight 5,4 kg change-time tool to tool 2,8 sec change-time chip to chip 3,6 sec rapid traverse ( X / Y / Z ) 18,0 m/min Number of working hours 14375 h spindle drive 22,4 kW transport dimension 2,25 x 2,4 x H = 2,5 mm weight of the machine ca. 3,42 t dimensions of the machine ca. 3,2 x 2,5 x 2,8 m Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operating hours (14,375). Lehmann dividing head, model ix-Y3, weight 80 kg. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 2134 x 1016 x 762mm, Table 2134 x 914mm, table load 1814 kgs, Spindle Speed 7500 rpm, Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger, Hnjdsx D Ulmjpfx Ag Ueg

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Software & Control: - High-Speed Machining (HSM) - Ethernet interface - Macros - Coordinate rotation and scaling Hnedpfx Aoyaad Ijg Usg

Condition: used, Year of construction: 2017, max. grinding diameter 250 mm grinding length 500 mm Hnodpfeyabilox Ag Ujg workpiece length 550 mm weight of the machine ca. 8,5 t dimensions of the machine ca. 2789x2525x2400 mm Number of CNC axes (X/Y/Z/A/B/C): 5 to 6 Travel distances (X/Y/Z) [mm]: 630 / 345 /430 Max. speed (X/Y/Z) [m/min]: 30 / 30 / 30 Swivel angle of grinding spindle +/- (C-axis): -225° to 70 Drive power of grinding spindle [kW]: 11 / 11.5 / 21 Speed range of grinding spindle [min-1]: 0 to 8,000 / 18,000 / 30,000 Grinding wheel diameter [mm]: 250 Abrasives All abrasives Grinding length [mm]: 500 Workpiece length [mm]: 550 Workpiece cutting diameter [mm]: 260 Workpiece spindle mounting cone: SK50 / HSK80/63/50 / Form A and E Control: Sinumerik One

Condition: ready for operation (used), Year of construction: 2012, This 3-axis HAAS VF-5/50XT was manufactured in 2012, designed for robust vertical machining. It operates on a voltage of 360/480, with a 3-phase power supply and a frequency range of 50/60 Hz. The machine handles a full load of 45 amps and a largest load of 70 amps. If you are looking to get high-quality milling capabilities, consider the HAAS VF-5/50XT machine we have for sale. Contact us for more information. • Voltage: 360/480 • Phase: 3 • Hertz: 50/60 • Full Load: 45 Amps • Largest Load: 70 Amps • Short Circuit Interrupting Capacity: 10000 Amps • Short Circuit Current: 5000 Amps RMS Symmetrical Hnjdpfx Aeyabubeg Uog • Wiring Diagram: C5 0284

Condition: excellent (used), X-axis travel: approx. 508 mm (20") Y-axis travel: approx. 508 mm (20") Z-axis travel: approx. 508 mm (20") Work envelope: Cube-style 20" × 20" × 20" Pallet & Rotary System Pallet size: 300 × 300 mm Automatic Pallet Changer: Dual pallet system B-axis: 360° rotary indexing Spindle Spindle type: Inline Direct Drive Spindle Maximum speed: 12,000 RPM High accuracy, low vibration, and reduced maintenance Coolant System TSC – Through Spindle Coolant Ideal for deep drilling Excellent chip evacuation Tooling & Equipment Automatic tool changer REGO-FIX high-precision tool holders visible Machine prepared for serial and high-efficiency production Key Options 12,000 RPM spindle Inline direct-drive spindle Through Spindle Coolant (TSC) Automatic Pallet Changer Condition Machine is in good working condition Installed in an active production environment Well maintained and clean overall condition Hjdex Ttz Iepfx Ag Ujng Additional Information The Haas EC-300 is a robust and reliable horizontal machining center, well suited for automotive, subcontracting, and serial production applications. This configuration, equipped with 12,000 RPM spindle, TSC, and pallet changer, is considered a highly desirable option package.

Condition: good (used), Year of construction: 2016, 1 used 5-axis machining center Manufacturer: Haas, Model: UMC-750, Year of manufacture: 01/2016, Read spindle hours: 4,960, Feed hours: 10,247 Travel X/Y/Z = 762x508x508 mm, Hnedpfsxyinnjx Ag Ueg 10,000/5,000 Bh Tool holder: SK40, 40-position tool changer, NC SRT table size: 630x500 mm, Maximum table load: 300 kg, Maximum swing diameter: 686 mm,

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 406 x 508mm, Table 915 x 355mm, Spindle speed 0 - 12000rpm, Spindle taper BT40, Spindle Motor 40Hp, Hnjdpfxox Dk Evs Ag Uog HAAS Control, 30 Station ATC, coolant

Condition: used, Year of construction: 2007, operating hours: 7,675 h, functionality: fully functional, machine/vehicle number: 1059027, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, torque: 122 Nm, controller manufacturer: Haas Automation, controller model: Haas CNC control 32 bit, workpiece length (max.): 1,321 mm, workpiece width (max.): 457 mm, workpiece height (max.): 635 mm, workpiece weight (max.): 1,588 kg, total height: 2,570 mm, total length: 3,330 mm, total width: 2,340 mm, table width: 495 mm, table height: 107 mm, table length: 1,321 mm, table load: 1,588 kg, overall weight: 5,316 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 667 h, coolant supply: 6.9 bar, spindle motor power: 22 W, spindle nose: CT-40/BT-40, number of spindles: 1, number of slots in tool magazine: 20, mount diameter: 89 mm, tool diameter: 89 mm, tool weight: 5 g, input voltage: 440 V, type of input current: three-phase, For Sale – Haas VF-4 Vertical Machining Centre (2007 Model) Hnsdpfoxu E Dzex Ag Uog We are selling our 2007 Haas VF-4 CNC Vertical Machining Centre, a reliable and versatile machine that has been well maintained and is ready for immediate use.

Condition: excellent (used), Year of construction: 2019, operating hours: 4,101 h, functionality: fully functional, machine/vehicle number: 1159962, Equipment: chip conveyor, HAAS VF 5 SS VERTICAL MACHINING CENTRE YEAR 2019 SPINDLE SPRRED 12,000 RPM TRAVELS - X AXIS - 1270 MM Y AXIS - 660 MM Z AXIS - 635 MM TABLE SIZE 1321 X 584 MM THROUGH SPINDLE COOLANT HIGH SPEED MACHINING 40 TAPER RIGIT TAP 30 ATC 4TH AXIS ENABLED SWARF AUGER Hnodsw N Nw Aepfx Ag Ueg HOURS IS ON THE PHOTOS

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Consider the opportunity to buy this HAAS UMC-750SS vertical machining center. Contact us for more information. Additional equipment • Coolant tank – 208 liters with mobile cart • Programmable coolant pump (M-code controlled) // Programmable Coolant Nozzle (P-COOL) • Safe Run – crash and overload detection system • Control cabinet surge protection • Voltage fault detection module (EPFDM) • Second Home Position button • Remote Jog Handle with 2m cable (RJH-XL) • Memory lock key-switch • Rotary axis scales • Top cover Hedpfx Agex U Tizs Usng Machine Benefits Technical Machine Benefits • 30+1 tool side-mount tool changer • Wireless intuitive probing system (wips) • Broken tool detection (btd) Extra Information Media display via M130 (images, videos, PDF on screen) Standard machine memory: 1 GB Control Unit 15" color LCD monitor with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity Controller High-speed machining (HSM) Rigid tapping Dynamic Work Offsets / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation & scaling

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 1.321 x 457 mm Table load 1.588 kg Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Hnodjx E S Iqepfx Ag Ueg Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Hodev N Di Aspfx Ag Ueng Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 762 x 406 x 508, Hedpfxjx Dk Epo Ag Ujng Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 20Hp HAAS Control, 20 Station ATC, Programmable Coolant nozzle, Low Volt light, swarf auger

Condition: used, Year of construction: 2022, operating hours: 20 h, functionality: fully functional, travel distance X-axis: 203 mm, travel distance Z-axis: 1,219 mm, overall weight: 2,087 kg, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, We are offering this used HAAS TL-2 horizontal machining center, year of manufacture 2022. Serial number: 3124664 Manufacture date: 06/2022 Voltage: 400 V Phases: 3 Hnedpfxjx Tgx He Ag Ueg Frequency: 50/60 Hz Rated current: 13 A Maximum current: 10 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 6,000 rpm, This HAAS SL-10 HE was manufactured in 2007. It is a horizontal turning machine featuring a maximum cutting diameter of 173 mm and a length of 406 mm. Equipped with a 3-jaw chuck and 12 tools, it operates at a spindle speed of 6000 RPM. Consider the opportunity to buy this HAAS SL-10 HE horizontal turning machine. Contact us for more information. Hnedjx Uqnbspfx Ag Ueg • Maximum Cutting Diameter: 173 mm • Maximum Cutting Length: 406 mm • Number of Tools: 12 • 3-jaw chuck

Condition: good (used), Year of construction: 2015, 1 used portal machining center Manufacturer: Haas Model: Gr 510 Year of manufacture: 2015 Technical details X-axis: 3073 mm Y-axis: 1549 mm Z-axis: 279 mm Control: HAAS Table size: 3099 x 1346 mm Total power requirement: 11.2 kW Machine weight approx.: 9.2 t Shipping dimensions: 5.5 x 2.9 x 2.9 (3.2) m Space requirements approx.: 6 x 3 x 3 m Additional information 4th axis NC rotary table with tailstock and swiveling bridge Hedpfsxzifvex Ag Ujng

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Hnedpfx Agov Tah Ao Ueg Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 394 mm, controller manufacturer: HAAS, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HAAS DM-1 vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a spindle drive of 11.2 kW, and a tool magazine with 18+1 tools. The rapid traverse rate is 61 m/min, enhancing productivity. If you are looking to get high-quality milling capabilities, consider the HAAS DM-1 machine we have for sale. Contact us for more information. • Rapid traverse: 61 m/min • Tool magazine: 18+1 tools • High-speed machining Hnsdpfx Agsx D I Dio Ujg • Cabin cooling • Programmable coolant nozzle • Rigid tapping • Power-failure detection module • Program memory: 1 GB • Display: 15" color LCD monitor • USB port • Memory lock switch • Bushingless threading • Jet cooling • Coolant system capacity: 170 L (45 gallons) • Purchased as new in 2016, low hours Additional equipment • Renishaw intuitive wireless probe system • High-speed tilting-rotary table, 100 mm • Auger chip conveyor Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Hodpexwyuajfx Ag Usng Spindle taper BT40, Spindle Motor 30Hp HAAS Control, 24 Station ATC, Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, max table weight 300kg, table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, Hnodpfx Askticxjg Ueg coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, Hodpjxpw Rvofx Ag Ueng HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: excellent (used), Year of construction: 2014, Traverses X Y Z: 1016 x 660 x 635mm, Spindle nose to Table: 102 – 737mm, Table 1372 x 635mm, Hsdpfxep H Tb Ne Ag Ueng Spindle speed 12000rpm, Spindle Taper ISO40, Spindle Motor 22.4kW, HAAS Control with High Speed Machining, 24 Station ATC, Programmable Coolant nozzle, Low Volt light, Swarf auger, Renishaw Tool Setter & Probe