Used Guide And Tips Up To 500 Mm Spindle Lathe for sale (99,270)

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 Itsdpfsvtp Edsx Akpon >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: good (used), Year of construction: 1986, Hollow Spindle Oil Country Lathe SARO SBF 710X2000 Made in Romania Year of manufacture: 1986 Main technical data: - Max. diameter passing through main spindle: 263.3mm - Max. swing over guideways: 710mm - Max. swing over cross slide: 400mm - Max. swing in gap: 950mm - Length between centres: 2000mm - Main spindle speed range: 4 – 500 rpm - Main motor power: 22 KW - Machine weight ab. 6,3ton Iedpfxsumtbro Akpetn The machine is in good condition. The electric equipment was changed with new one. For more information please contact us.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm Itjdpfx Akevivmyjpon >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: new, New lathe with large spindle bore. Brand : KMS Iodpfxjhhm Eds Akpstn Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: used, Year of construction: 2018, Technical details: Itsdpsz Sr Dujfx Akpsn weight of the machine ca.: 3,5 t

Condition: used, Year of construction: 2005, Technical details: spindle passage: 36 mm Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: A36PC Yob: 2005 Loading magazine by Pietro Cucchi Knoll unit 7 radial cross-type carriages 2 additional speed motors in 4th and 5th positions Iedpfxozg Aw Ns Akpotn 2 additional speed motors for front spindles in position D (pick-up) and B (for front motorized spindle) 1 polygon cutter 1 motorized front spindle 1 radial motorized in position IV for cross-type carriage 1 radial motorized in position V to be mounted on X-type carriage only (no cross-type carriage) 1 straight head for motorized position IV 1 90-degree tilted head for motorized position IV 1 tilt-adjustable head for motorized position IV Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1999, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SF20 S Dnt Yob: 1999 Six-spindle automatic lathe with 6 main spindles max. nominal diameter: D=20mm Spindle drum hirth coupled, CNC cross slide in positions 4, CNC cross slide in positions 5, pick up in position 6, sorting chute, 1x independent feed, thread cutting couplings, workpiece belt, Coolant tank with hinged belt chip conveyor Ruez, Oil/steel operation, Itjdpfxjx Sx Nho Akpsn PLC Siemens S7, Siemens CNC control, Siemens Simodrive 611, The scope of delivery regarding the tooling equipment could be different like pictures. Interface for: IEMCA PRA bar loading magazine (optional: IEMCA PRA40/31/ built in 1997 rear loader) *

Condition: excellent (used), Lead and tension spindle lathe spindle bore 76 mm Center height 220 mm turning length 3.00 m Multifix steel holder with 5 cassettes Coolant device Itsdeva Ef Tspfx Akpsn Operating instructions

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Isdpfjuqb Emex Akpstn Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: excellent (used), Voest DA 180 Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: VOEST ALPINE Lathe Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981 Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Coolant system Motor: 380 Volt, 5.5 kW 12 spindle speeds: 44 - 2,000 rpm 66 longitudinal feeds: 0.072 - 4.038 mm/rev 66 cross feeds: 0.036 - 2.019 mm/rev 66 metric threads: 0.5 - 28 mm 66 inch threads: 1 - 32 TPI 66 module threads: 0.25 - 14 66 DP threads: 2 - 112 3-jaw chuck Weight approx. 1,200 kg Accessories and Equipment: Ijdpfxjxp I D Te Akpjtn 1 piece Röhm 3-jaw chuck 200 mm Multifix size B Digital readout About the Machine: We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. You can find further drilling machines from reputable manufacturers on our website.

Condition: used, Year of construction: 1993, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross Iedpfx Aergt E Rjkpstn CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures. *

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Itjdpfxsvadqzj Akpen Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm Itjdpou Idxrofx Akpjn TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: new, Year of construction: 2024, Special offer: €42,000 (instead of €49,900), excluding VAT. Immediately available / Made in Italy Included premium features: - Heidenhain ND5023 3-axis position display - 5-position length stop for the carriage - SRW-Amestra Multifix C quick-change tool holder with 4 inserts - LED work area lighting - Set of leveling pads from Spinelli Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse - Air supply on the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock and carriage made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - Spindle is mounted on high-precision bearings - Friction-free movement of the carriage - Electrical system in an airtight cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chuck guard with microswitch, turret plexiglass guard, rear guard covering the entire machine length, guard for leadscrew and feed rods, emergency stop button - Chip tray on wheels - Cooling system with electric pump - Central lubrication of the guides with automatic pump - Traveling and steady rest - Service tools and wrenches, test certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Optional features: - 3- / 4-jaw chuck Technical data: - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing over cross slide: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm Itodpfx Akjpq R Rdopon - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Compound slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill travel: 200 mm - Tailstock quill taper: MK5 - Total weight: 3200 kg

Condition: new, 15000 kg Itodpfx Aeyt R I Rskpsn height 790 - 1350 mm width 1400 mm ja 790 - 1350 mm 120 x 1400 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - CE marking - Transport on request

Condition: used, Max. turning length: 1000 mm, center height: 250 mm, hollow spindle diameter: 60 mm, max. speed: 2240 rpm, with 3-jaw chuck, manufacturer: SCHUNK, type: ROTA-S-PLUS, diameter: 250 mm, with machine light, steady rest, and Multifix steel tool holder. Iodpez Nhrcsfx Akpetn

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center height in crank: 517 mm, center width: 400 mm, turning length: 1,500 mm, feed length X-axis: 420 mm, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,240 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 2,600 kg, MTP CQ6280 Lathe 800 × 1500 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CQ6280 is a heavy-duty universal lathe designed for machining shafts, tapers, spherical surfaces and internal and external threads using turning tools, drills and threading tools. With a swing over bed of 800 mm, a turning length of 1500 mm and a Ø105 mm spindle bore, it is ideally suited for professional workshops and industrial production. TECHNICAL DATA • Maximum turning length: 1500 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm (gap length 330 mm) • Bed width: 400 mm • Z-axis travel: 230 mm • X-axis travel: 420 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm (16 speeds) • Spindle bore: 105 mm • Spindle nose: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev (25 steps) • Z-axis feed: 0.044–1.48 mm/rev (25 steps) • Tailstock quill: Ø90 mm, MT5, 235 mm travel • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm (54) • Module threads: 0.25–60 mm (46) • Whitworth threads: 7/16–80 TPI (54) • Diametral Pitch threads: 0.88–160 DP (42) • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3240 × 1140 × 1910 mm • Weight: 2600 kg Itsdpfx Akjyzzghepsn STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard and splash guard • Coolant system • Reduction sleeves • Fixed centre • Tool set DELIVERY, WARRANTY & SERVICE Delivery can be organised to any destination in Europe. The machine is supplied with a 12-month warranty on parts, with technical service and support available throughout Europe.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Itsdpfx Akju Aftgepen Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: used, Max. turning length: approx. 800 mm, center height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, manufacturer: ELESTA, type: VISULESTAIIE, with Multifix steel tool holder, magnetic chuck, coolant system, splash guard, and machine light, as well as various machine accessories. Ijdpez Nhpbofx Akpstn

Condition: excellent (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, Dear Sir or Madam, For sale is a Weiler Condor B lathe. This model is particularly notable for its very user-friendly operation and an excellent space-to-center height/center distance ratio. The Condor B is sized between the Weiler Praktikant and the Weiler Commodor, making it a genuine all-rounder for any workshop. The machine undergoes a thorough partial overhaul in our shop to ensure it is in excellent technical and visual condition. All guideways are in good order, the gearboxes run quietly, and all levers are easy to operate. You are welcome to inspect the machine on-site to verify its condition yourself. Availability: on request Center height: 165 mm Center distance: 750 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Chuck mounting: short taper DIN 55027 size 5 with bayonet lock Quill travel: 85 mm Spindle speeds: 22–2800 rpm Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28 mm Spindle brake: switchable Voltage: 400V Dimensions: approx. 1.80 x 1.30 x 0.9 m (LxHxW) Weight: approx. 1100 kg Further equipment and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop, leadscrew and feed shaft cover (optional), operating manual, and much more on request... Ijdpfew N Np Sjx Akpetn Our service commitment to you: - We are a certified master machine engineering business - All machines are at least workshop-tested - All lubricants and any worn components are replaced prior to sale - On request, we offer complete or partial overhaul of your selected machine - On request, we can repaint your chosen machine in any color you wish - Additional accessories such as tooling can be ordered with the machine upon request - On request, we can also install further accessories such as safety devices - We are happy to handle shipping and/or on-site installation for you

Condition: used, functionality: fully functional, Year of construction: 1989, operating hours: 8,775 h, load capacity: 3,000 kg, lifting height: 3,175 mm, fuel type: diesel, mast type: free lift with telescopic boom, gearing type: automatic, empty load weight: 5,380 kg, color: red, Equipment: 3rd hydraulic function, cabin, lighting, pallet forks, Cab with heating (driver's door included), side sliding door (disabled), German-made engine. Itedpfx Aksz E R Hyepen For sale to commercial businesses only, with no warranty of any kind. Loading possible.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Isdpfjy Ed Atox Akpotn Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: used, Technical details: spindle taper: SK40 spindle stroke: 175 mm number of spindles: 8 Stück number of stations: 5 Stück cycle time: 15-20 sec revolutions per minute: bohren/drill/taladrar 225...1037 U/min. revolutions per minute: gewinde/threading/roscar 50...316 U/min. feed: 0,2 m/min total power requirement: 30 (40PS) kW weight of the machine ca.: 9,0 t space requirements of the machine approx.: 3,9x2,4x2,5 m dimensions of machine: L:3,9xB:2,2xH:2,7 m dimensions L x W x H: +Anlage/plant/planta 2,7x2,52x2,25 m The machine will be on a General overhaul (pictures from original condition at the former Company) The machine has been constructed for the metal cutting process of workpieces in one clamping session. Especially blanks made of brass with a diameter 90mm x approx 100mm length would be machined with this machine. description: - workpiece support with switch plate with clamping station type round table with horizontal axis with 5 workpiece stations processing units: - drill spindle and thread cutting units - drill capacity up to 2 3/4" and 81,53mm in brass - thread cutting up to 2 1/2" und metric thread Machine is equipped with a feeding-and unloading unit for workpieces. ( feed capacity 3 -4 pieces/min and cycle time 15 - 20 sec.) furthermore incl. coolant device i.D. * Itedpfx Aju Idycekpen

Condition: good (used), The scope of delivery includes: 217x shelf connectors, used Manufacturer: Nedcon Type: NS Material color: orange Head plate dimensions: approx. 140 x 117 mm for a shelf spacing of: approx. 500 mm Suitable for a frame profile: 120 mm Profile dimensions: approx. 60 x 40 mm Ijdei Euvcepfx Akpjtn Borehole diameter: approx. 10 mm Weight: 1.75 kg/piece.

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Itodpfxexf E Rcs Akpsn Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!