Used Guide And Tips Up To 500 Mm Spindle Lathe for sale (99,334)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : 210 - 370 mm 365 - 520 mm Only available as a set Guodpfx Agju Tvdbj Tsh

Year of construction: 2012, condition: as good as new (ex-display), 2nd hand Fill and seal machine, VI-500 - Format : True Quad (Stabilo) bag wide, 200 mm breit x 100 deep, Guedpfxjff Hucs Ag Tjh the machine was never in use in consequence the machine has zero working hours Also for sale: fill and seal machine - VI-250 - Format : 50 mm wide

Condition: good (used), Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe M4L -Max. passage: Ø 500 mm -Peak height: 390 mm -Technical drawing: see photos -Dimensions: 840/140/H850 mm Godpeh Tr E Hofx Ag Touh -Weight: 98 kg

Condition: refurbished (used), functionality: fully functional, turning diameter over cross slide: 370 mm, spindle bore: 105 mm, turning diameter: 600 mm, center height: 300 mm, turning length: 1,500 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 20 rpm, type of input current: three-phase, GORNATI LEGOOR 300 parallel lathe Overhauled and fully refurbished Guides re-ground Guodpfjzzq Nvox Ag Tsh Guides, lead screws, bed, etc., restored New electrical system. OMAP self-centering chuck with double guide. Tool turret with 5 tool holders. Tailstock. Center height 300 mm Distance between centers 1,500 mm Diameter over bed 600 mm Diameter over cross slide 370 mm Diameter in the bore 890 mm Bar capacity 105 mm 16 speeds Spindle speed 20-1,500 rpm.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 105 mm, turning diameter: 560 mm, turning length: 1,500 mm, total length: 2,840 mm, total width: 1,150 mm, total height: 1,460 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, overall weight: 3,200 kg, Technical data Swing over bed: 560 mm Swing over cross slide: 355 mm Swing in gap: 785 mm Turning length in gap: 170 mm Distance between centers: 1500 mm Bed: induction hardened Bed width: 350 mm Chuck diameter: 315 mm Guodpjytpy Sofx Ag Tsh Spindle bore: 105 mm Spindle nose: D1-8 Spindle taper: MT7 Spindle speed range: 25 – 1500 rpm Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.073 – 2.048 mm/rev Cross feed range: 0.020 – 0.573 mm/rev Metric threads: 0.2 – 14 mm Inch threads: 2 – 112 T.P.I. Module threads: 0.1 – 7 M.P. Diametral pitch threads: 4 – 112 D.P. Rapid feed: longitudinal 4.2 m/min cross 1.9 m/min Tailstock quill diameter: 75 mm Tailstock quill travel: 180 mm Tailstock taper: MT5 Main motor power: 7.5 kW Coolant pump power: 0.1 kW Dimensions (L × W × H): 2840 × 1150 × 1460 mm Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate Gusdpeu Idxfsfx Ag Tsh - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Year of construction: 2014, Miyano ABX-64THY2 Twin Spindle Fixed Head Stock Lathe with Fanuc Series 31i Model B CNC Control, Triple Turret all 12 Position, Hainback Collet Chucks, 10 Axis Machine, Driven Tooling Capability, Spindle 1 - 40 - 4000rpm, Spindle 2 - 50 - 5000rpm, Max Working Diameter 64mm, IEMCA Master 21 3m Bar Feed, LNS Swarf Conveyor. S/No. CP640028 (2014) 11.350kg. (2) X Right Angle Driven Tooling for Miyano ABX64, (2) x Straight Driven Tooling for Miyano ABX64. Country of Origin: Japan Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gjdpfx Aozzbxbsg Touh

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table Gusdpjb Uhpijfx Ag Tjh -Clamping surface width: 500 mm -Length of the table surface: 10930 mm -Height of table surface: 262 mm -Working height: 262 mm -Price: per piece -Number: 1x available -Transport dimensions: 11370/510/H240 mm -Weight: 2020 kg

Year of construction: 1977, condition: ready for operation (used), Two Schütte six-spindle turning machines including one Iemca bar feeder are available. 1) Schütte SF 42, year of manufacture: 1977, number of spindles: 6, max. bar capacity: 42mm, max. longitudinal slide stroke: 125mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 6500mm/1400mm/2200mm, weight: approx. 10000kg. Including pick-off spindle, cams, collets, chip conveyor, oil mist extraction system and Iemca PRA40/33/P bar feeder. 2) Schütte SF 51 DNT, year of manufacture: 1987, max. bar capacity: 51mm, number of spindles: 6, max. turning length: 102mm, max. drilling depth: 102mm, spindle circle diameter: 340mm. Including pick-off spindle, CNC cross slide in position 4, cams, collets, auxiliary coolant pump and chip conveyor. Documentation available. An on-site inspection is possible. Gujdpfx Agezbuuwj Toh

Condition: used, TECHNICAL DETAILS - Maximum workpiece diameter : 4 [mm] - Number of tools : 2 - Feed system, standard lever, 2:1 ratio : 24 [mm] - Production with turret indexing : 1.25–31.5 [parts/min] - Production without turret indexing : 1.25 - 63 [parts/min] - Toolholder Spindle Speed : 4000 or 6000 [rpm] - Maximum clamping diameter of the drill chuck : 3 [mm] - Maximum drilling depth : 15 [mm] - Maximum Ø of the counter-gripper : 4 [mm] - Drilling speeds : 3000 / 5000 / 8000 / 12000 [rpm] - Turret indexing time : 0.33 [sec] POWER SUPPLY - Supply voltage : 220 [V] Gujdpfx Aozx Hkweg Toh WEIGHT & DIMENSIONS - Machine floor space : 1100 x 680 [mm] - Machine height : 1600 [mm] - Machine weight : 870 [kg]

Condition: used, TECHNICAL DETAILS - Number of turret positions : 4 - Max. stroke of drilling, tapping, and threading spindles : 32 [mm] Gusdpfx Aozx Hlbjg Tsh - Max. stroke of the counter-grip spindle : 36 [mm] - Max. diameter for brass threading/tapping : 5 [mm] - Max. diameter for steel threading/tapping : 4 [mm] - Max. threaded length : l [mm] - Max. clamping diameter of drilling spindles : 6 [mm] - Maximum Ø of the counter-gripper : 6.35 [mm] - Maximum workpiece diameter : 6.35 [mm] - Feed ratio 1:2 with counter-gripper or revolver : 31 [mm] - 1:1 feed ratio with counter-gripper or revolver : 62 [mm] - Dual feed, 1:1 ratio, counter-clamp only : 124 - Number of speeds/cam cycles : 37 - Production : 0.8 - 35 [parts/min] - Number of tools : 3 - Maximum tool travel : 4 [mm] - Toolholder Spindle Speed : 2400 / 3800 / 6000 [rpm] - Tool Dimensions : Ø 6 x 34 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1800 x 900 [mm] - Machine weight : 1090 [kg]

Condition: used, TECHNICAL DETAILS Gusdpfx Agozx Hk De Tsh - Maximum workpiece diameter : 4 [mm] - Number of tools : 2 - Feed system, standard lever, 2:1 ratio : 24 [mm] - Production with turret indexing : 1.25–31.5 [parts/min] - Production without turret indexing : 1.25 - 63 [parts/min] - Toolholder Spindle Speed : 4000 or 6000 [rpm] - Maximum clamping diameter of the drill chuck : 3 [mm] - Maximum drilling depth : 15 [mm] - Maximum Ø of the counter-gripper : 4 [mm] - Drilling speeds : 3000 / 5000 / 8000 / 12000 [rpm] - Turret indexing time : 0.33 [sec] POWER SUPPLY - Supply voltage : 220 [V] WEIGHT & DIMENSIONS - Machine floor space : 1100 x 680 [mm] - Machine height : 1600 [mm] - Machine weight : 870 [kg]

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Gujdpfx Aotqfq Ueg Tsh

Condition: good (used), Year of construction: 2012, 300mm max cutting diameter, Gjdpfx Aezg Eb Djg Teuh 510mm mm max turned length, 51mm bar capacity, 11kW motor, Spindle speed 6,000 rpm, milling speed 6,000 rpm, sub-spindle speed 6,000rpm, C axis 0.001 degrees, Fanuc oi-Series Control, 3 Jaw Chuck, Tool setter, 12 Station turret, parts catcher, parts conveyor

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Gsdpfjyln Eksx Ag Tsuh

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Guedpfsxp Rvljx Ag Toh

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Gjdpfx Agsxp Ru Ue Tsuh

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages Guedpsu Idw Isfx Ag Tsh - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. *

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,550 mm, total width: 2,250 mm, total height: 2,530 mm, overall weight: 5,200 kg, Special Offer – 5% Discount Available! Surface Grinding Machine SGC512AHD – Moving Column Type The MTP SGC512AHD Surface Grinding Machine is a heavy-duty precision grinder designed for machining large flat surfaces in tool rooms, production facilities, and metalworking workshops. Its moving column design, rigid cast-iron construction, and Mitsubishi PLC touchscreen control ensure high accuracy, excellent stability, and reliable performance. Hardened and precision-ground guideways with Durcite-B coated sliding surfaces reduce friction and provide smooth, accurate movement. The hydraulic table drive guarantees stable operation, while the precision spindle produces an excellent surface finish. Main Features • Mitsubishi PLC touchscreen control • Electronic handwheel • Moving column construction • Hardened and ground guideways • Durcite-B guideway coating • High grinding accuracy • Hydraulic table drive • Heavy-duty cast-iron construction • CE certified Standard Equipment • PLC touchscreen control • Electronic handwheel • Grinding wheel • Wheel flange • LED work light • Electromagnetic chuck • Balancing stand • Balancing arbor • Safety guards • Demagnetizer • Coolant system • Diamond dresser • Machine feet • Central lubrication • Tool kit Included Equipment Godpfx Ajy Hr Uysg Touh • Magnetic separator with paper filter • Full machine enclosure • Parallel dressing device • Dust extraction system • 2-axis digital readout (DRO) • Integrated magnetic chuck controller • 6 kW frequency inverter • Diamond dresser • Additional wheel flange Technical Specifications • Model: SGC512AHD • Brand: MTP • Table size: 500 × 1200 mm • Magnetic chuck: 500 × 1200 mm • Longitudinal travel: 1140 mm • Cross travel: 540 mm • Maximum spindle-to-table distance: 570 mm • Maximum workpiece weight: 800 kg • Grinding wheel: 350 × 20–40 × 127 mm • Hydraulic table speed: 5–25 m/min • Spindle motor: 5.5 kW • Spindle speed: 1440 rpm • Hydraulic motor: 2.2 kW • Vertical feed motor: 0.75 kW • Machine dimensions: 3550 × 2250 × 2530 mm • Machine weight: approx. 5200 kg Applications • Tool rooms • Manufacturing plants • Metalworking workshops • Precision grinding of tool steel, structural steel and cast iron • Production of precision machine components Transport & Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected for transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide technical advice, spare parts, and comprehensive after-sales support. Contact us for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp MultiGrip bucket / MG.015.050 / MS01 / 500 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,420.00 net / €2,879.80 gross - Excavators up to: 1.5 tons - Weight approx.: 55 kg - SAE capacity: 33 liters - Cutting width: 500 mm - Maximum opening: 340 mm - The bucket is made entirely of HARDOX. - The MultiGrip combines the two attachments, a deep bucket and a grab, into a single tool. Advantages of the Holp MultiGrip bucket: - Cylinder with hardened piston rod - Only the grab swivel lines are needed for operation - Robust mounting in the side wall - Safe gripping and transporting - Stable shafts connect the two fingers (forming a 3-point grip for small parts) - Significantly lighter than a grab - Up to 30% more earth can be loaded into the bucket during excavation work - Minimization of damage caused by falling material The MultiGrip is suitable for all excavation and grabbing tasks; it is ideal for moving stones, filling earth, and grabbing wood and brush, and it is significantly faster than a grab. It can grab and sort all types of materials, even earth or grass. Due to its unique shape, the MultiGrip bucket has optimal penetration and handles bulky material well. We have many other Holp products in our warehouse that are immediately available! Please contact us at [phone number] or [email address] for more information. Upon request, we will be happy to provide you with a financing offer. Guedpfjyl Hdfox Ag Tsh We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Please contact Marius Herden for further information.

Condition: used, Year of construction: 1995, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: SFH130 Yob: 1995 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC Dnt drive loading and disloading in position 6 additional cooling pump with magnetic spark plug filter Please, contact us for getting more information and pictures on mail(at) or * Gjdpfx Agsw Hbz Ao Touh

Condition: new, 15000 kg Gjdpoqvq Txofx Ag Tjuh height 790 - 1150 mm width 1200 mm ja 790 - 1150 mm 120 x 1200 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - galvanized - CE marking - Transport on request

Condition: used, functionality: fully functional, spindle bore: 62 mm, turning diameter: 410 mm, center height: 205 mm, turning length: 1,500 mm, type of input current: three-phase, Parallel lathe Norwich Orion Mod. c 6241 / YZ 1500 Centre height: 205 mm Swing over bed: 410 mm Distance between centres: 1500 mm Bar passage: 62 mm Gjdjy N T R Iopfx Ag Tsuh Main motor power: 5.5 HP Steadies included

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Tool holder Steadies Live centre Gusdoxxm A Hepfx Ag Toh

Condition: used, Technical details: number of spindles: 9 Stück total power requirement: 83,0 kW weight of the machine ca.: 17,0 t TRANSFERAUTOMAT with 9x drill-and mill spindles - right 3x drill-& mill spindle, 9 stages, driven, fixed and left 3x drill-& mill spindle 9 stages, driven, fixed such as radial 3x drill-& mill spindle with 9 stages, driven, fixed i.D. Gujdeu Idvkspfx Ag Toh *