Lead/traction spindle lathe

Weiler Primus

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and pull spindle lathe with 2 axis digital readout Heidenhain from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 2-axis digital readout from Heidenhain >> 1 new three-jaw chuck 125 mm with 2 sets of jaws >> collet chuck device new with collets new from 3 mm to 25 mm 1 mm increasing >> Mulifix size A with 3 steel holders Fjdpfxsu Afqlj Ad Njpp >> Back plate To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: new, cutting diameter 240 mm Fsdsd Iip Sspfx Ad Nspp dimensions of saw-band 2730 x 27 x 0,9 mm table height 920 mm cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm cross-slide 270x230 210 Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, continuously adjustable feed, with limit switch at the end of the cut. Rapid lowering of the saw frame from the rest position to the workpiece, then toggle to normal saw feed (e.g. for scribing). Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for notching). Through the brake cylinder the saw can be positioned in any position during the return stroke.

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws Fpodpfx Asrtd Uwsd Njp - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, For sale is a lathe of the brand Weiler type Primus LZ-GS The machine is in very good condition Technical data Year of construction 1989 Machine no. 4443 Operating voltage 380 V Center height 120 mm Center width 430 mm Speed:60 - 3000 rpm in 18 gear stages Spindle clearance 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feed rates from 0.03 to 0.15 mm /rev Possible threads metric, inch, module and diametral pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Fpsdpsihig Iefx Ad Nep For further information or contact options, please visit our website

Condition: used, functionality: fully functional, machine/vehicle number: 211433, workpiece weight (max.): 1,200 kg, Offered for sale is a Schaublin 135 lathe in good technical condition. The machine is fully functional with accessories. All guideways are in good condition, and the machine's geometry is sound. Fsdpfev Rxhiox Ad Nspp All slides run smoothly and evenly. The machine was overhauled in 2002 and has always been serviced according to the manufacturer's specifications. Please take advantage of the opportunity to view this machine on-site.

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Fpodpfov Ifxiox Ad Nop Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Multifix tool holder, 24 longitudinal feeds, Metric thread, Inch thread,

Condition: excellent (used), Parallel Lathe WEILER type PRIMUS Between points: 400 mm Maxi Ø on bench: 250 mm Maxi Ø over saddle: 130 mm Spindle Ø 24 mm Turret Multifix type A Fedpfxexnp I Do Ad Njpp 3-jaws chuck Ø 155 mm Threadings Metric + Whitworth Tailstock CM2 Scale HEIDENHAIN ND522 Feeds: auto 2 axes New electrical panel Delivered with: 1 4-jaws chuck Ø 155 mm, 4 tool holders, 1 drill chuck Voltage: 380 V Dimensions (L x W x H): 1300 x 900 x 1900 mm Weight: approx 500 kg Machine in VERY GOOD CONDITION

Condition: new, The bSander 75.200 & 150.200 are machine sanders for sanding pipe faces and profile ends, for edge sanding and for face sanding on the upper surface of the system. bSander 150.200: Belt dimensions 150 x 2000 mm Belt speed 29 m/s. Drive power 4.0 kW//3x400 V//50Hz Fedsd Dp Aaepfx Ad Njpp Dimensions L x W x H 700 x 530 x 1130 mm Weight 90 kg bSander 75.200: Belt dimensions 2000 x 75 mm Belt speed 29 m/s Drive power 3.0 kW//3x400 V//50 Hz Dimensions L x W x H 700 x 490 x 1130 Weight 72 kg Price on request

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm Fodpfx Asvtp Edsd Nepp >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus GS guide and feed spindle lathe in very good original condition! Technical specifications: >> Year of manufacture approx. 1992 Machine no. 4549 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short taper spindle head DIN 4 Fsdpfx Adewkh Abe Njpp >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> New collet chuck system, new collets from 3 to 25 mm >> 1 piece Three-jaw chuck with 2 sets of jaws >> Mulifix size A with 2 tool holders About the machine: Offered is a Weiler Primus GS guide and feed spindle lathe in very good original condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in excellent condition. The Weiler runs very quietly even at high speeds. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that look as if they were ground. Take advantage of the opportunity to view this machine on-site with power on and see for yourself its condition.

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 contour measuring device Horizontal measuring range X = 100mm Vertical measuring range Z = 50mm Fpodovun Tpepfx Ad Nsp Column travel range Z2 = 350mm Inclination +/- 45° Dimensions (W, D, H) 745mm x 450mm x 885mm Total weight approx. 150kg Incl. PC system, Incl. cross table 218-001 Incl. rotating vice 2028-003

Condition: excellent (used), functionality: fully functional, Weiler Primus GS lead and feed screw lathe 3 axis digital readout Easson- ES8 from training workshop Super condition !!! Technical data: >> Year of construction approx. 1990 Machine no. 3768 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 3-axis digital display from Easson ES8 >> collet chuck device from 1 to 20 mm collets 1 mm rising with holder and draw tube >> 1 three-jaw chuck with 2 sets of jaws >> 1 four-jaw chuck with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Bed stop >> Turning device Fjdsvkfhpspfx Ad Nspp To the machine : We are offering a Weiler Primus lathe built around 1990 in excellent condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The bed guides are in very good condition. The Weiler runs smoothly even at high speeds. The machine comes from a training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself. Fodpfxovivmyj Ad Nspp

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 700 mm z-travel 550 mm Control Heidenhain TNC 530 Fpsdoxiy Dlspfx Ad Nop

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm Fpedew Idllopfx Ad Nsp >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet >> Splash guard About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.