Used Gildemeister Twin 32 for sale (241)

Year of construction: 2001, condition: ready for operation (used), X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool cabinets and documentation. The main spindle produces running noise. An on-site inspection is possible. Lajdpfx Aozrn H Tsfkef

Year of construction: 1999, condition: ready for operation (used), Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible. Lasdjzrn Idjpfx Afkof

Condition: ready for operation (used), Year of construction: 2010, X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible. Laedezrn Iwspfx Afkef

Condition: used, Year of construction: 2004, CNC lathe Gildemeister Type/Model CTX 520 linear Condition: Used Year of manufacture: 2004 Operating hours: 86,490 Spindle hours: 12,970 Technical data Working area max. turning diameter: 680 mm Laodpezn Ih Njfx Afkjf Turning diameter over X-axis: 565 mm Chuck diameter: 250/315 mm Spindle bore: 107 mm Spindle speed C-axis (main spindle): 400 rpm Travel in X-axis: 315 mm Travel in Z-axis: 1350 mm Number of tools: 12 Power max. 100% duty cycle: 4.9 kW Torque 100% duty cycle: 10.5 kW Speed range: 4500 rpm Tailstock Tailstock travel: 1200 mm Tailstock force: 14 kN Taper: 5 MK Quill travel: 120 mm Coolant system Capacity: 250 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: 65 kVA / 100 A Operating voltage: 400 V Dimensions and weight Weight approx. 10 t + 0.65 t Dimensions approx. 6000 x 3050 x 2270 Equipment: - Chip conveyor without pump - Machine feet Inquiry item: Transportation costs will be provided in a separate quote.

Condition: used, Year of construction: 2011, pricing can only be given out if you send me an email writing your email address. As machine seeker encrypts your email address. MACHINE: GILDEMEISTER CTX Alpha 300 V3S YEAR: 2011 SERIAL NUMBER: 00400003392 CONTROL: Siemens Sinumerik 840D sl ShopTurn ERGOline MACHINE TYPE: CNC Turning Center with C-Axis and Live Tooling CAPACITY: Maximum Turning Diameter: 200 mm Maximum Swing Diameter: 500 mm Maximum Turning Length: 300 mm Bar Capacity: 51 mm MAIN SPINDLE: Spindle Nose: A2-5 Ljdpfxjzd R S As Afkoaf Chuck Size: 165 mm Hydraulic 3-Jaw Chuck Spindle Bore: 65 mm Maximum Spindle Speed: 6,000 rpm Spindle Motor Power: 16.5 kW (100% duty) 25 kW (40% duty) Maximum Spindle Torque: 192 Nm AXES: X-Axis Travel: 190 mm Z-Axis Travel: 335 mm Rapid Traverse X: 30 m/min Rapid Traverse Z: 30 m/min TURRET: Turret Type: VDI 30 Number of Stations: 12 Live Tool Stations: 12 Maximum Live Tool Speed: 5,000 rpm Live Tool Power: 3.7 kW C-Axis Resolution: 0.001° TAILSTOCK: Hydraulic Tailstock (optional depending on machine configuration) COOLANT SYSTEM: Flood Coolant Chip Conveyor Compatible ACCURACY: Positioning Accuracy: ±0.005 mm Repeatability: ±0.003 mm ELECTRICAL: Power Requirement: 400 V / 50 Hz / 3 Phase Connected Load: Approx. 30 kVA DIMENSIONS: Length: 4,260 mm Width: 2,510 mm Height: 1,825 mm MACHINE WEIGHT: Approx. 4,000 kg

Condition: ready for operation (used), Year of construction: 2002, operating hours: 63,040 h, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laedpfx Ajzrgnpefkef Machine configuration Upper linear slides: 2 units Milling unit: 1 unit Transverse drilling units: 2 units Rigid front spindle: 1 unit Machining units Drum 6: Movable only in the X-axis Front position 1: Rotationally rigid spindle, movable only forwards and backwards Front positions 2 to 4: Rotationally fully controllable spindles Front position 5: Internal machining axis for processing internal contours and radii Front position 6: Driven indexing spindle with rear machining slide and two tools, movable towards the viewing side Full electronic equipment Electronically connectable auxiliary drives on the front positions and six drum slides MACHINE DETAILS Operating hours: 98,119 h Spindle hours: 63,040 h EQUIPMENT Chip conveyor High-pressure coolant unit Bar loader Milling unit Two transverse drilling units Collets Spare parts Electronic components for the control cabinet New rigid front spindle

Condition: excellent (used), Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool Ledpjb A Hvaefx Afksaf -Adjustment: SK50 -Tool holder: M20 -Price: for both recordings -Weight: 16 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch -Recording: MK5 Laedpfx Afjdkru Heksf -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Gildemeister lathe -Drive: 1.1 kw -Speed: 1410 rpm -Max. Pressure: 25 bar -Liter output: l/min -Filter -Hydraulic tank -Dimensions: 500/680/H660 mm -Weight: 98 kg Lsdpfx Afeb Uht Ejkeaf

Condition: used, Tool holder, milling holder, milling tool Lsdpfxjfnbyns Afksaf -Intake: SK50 5 pieces -Sizes: see pictures -Price: complete -Dimensions box: 400/300/H270 mm -Weight: 42.1 kg

Condition: used, Year of construction: 1991, turning diameter 42 mm turning length 250 mm control total power requirement kW weight of the machine ca. t Lodpfjt Hwz Asx Afksaf dimensions of the machine ca. m CNC-lathe with bar feed with Sameca bar feed

Condition: good (used), Year of construction: 2004, functionality: fully functional, Gildemeister CTX 510 Control system: Siemens 840 D with Shop-Turn Year of manufacture: 2004 Travel range X / Z: 300 / 1050 mm Turret: 12-station Tool holder: VDI 40 Laodjzmxz Rspfx Afkef Spindle speed up to: 3,500 rpm Bar capacity: 90 mm Quill travel: 150 mm Tailstock Coolant pressure: 20 bar Chuck size: 315 mm Spindle operating hours: approx. 14,000 * Batch sizes of 0 to 5 were produced on this machine. * Programming was carried out directly on the machine.

Condition: excellent (used), Year of construction: 2005, Gildemeister GLD25 Machine in very good operating condition. It can be inspected at any time during production. Lasdpfx Afszvpaijkjf Only 10,800 operating hours.

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm Lodpfezggahjx Afkjaf - Spindle speed: 25-5000 rpm - 12-station turret, no driven tools - Tool holder VDI 30 - Tailstock - Chip conveyor

Condition: used, Year of construction: 2002, turning diameter over cross slide: 260 mm, turning diameter: 200 mm, spindle speed (max.): 500 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,377 mm, total length: 4,165 mm, total width: 1,594 mm, overall weight: 3,200 kg, bar diameter (max.): 50 mm, For sale is a CNC turning machine with 6 driven tool positions, manufactured by Gildemeister, model CTX 310, from the year 2002. The machine is in good condition; of particular note are the low spindle hours and the measuring system. Technical data: Year of manufacture: 2002 Max. spindle speed: 5,000 rpm Speed at constant power: 833-3890 rpm Spindle power: 7.5 kW Chuck diameter: 210 mm Spindle bore: 68.5 mm Distance between centers: 581 mm Center height: 190 mm Diameter over machine bed: 330 mm Diameter over slide: 260 mm Swinging diameter: 200 mm Bar capacity: 50 mm Z-axis travel: 450 mm X-axis travel: 160 mm Rapid traverse Z: 30 m/min Rapid traverse X: 20 m/min Rapid traverse C1: 100 rpm Torque C1: 112 Nm Laedpfxozkr Sks Afkef Feed force Z: 4500 N Feed force X: 4500 N Number of axes: 2 Turret with tool drive from Sauter Tool positions: 12 Driven tool positions: 6 Cross-section of tools: 20*20 mm Speed of driven tools: 4200 rpm Power of driven tools: 4.2 kW Footprint (installed): 4,165 * 1,594 * 2,377 mm Footprint (transport): 3,190 * 1,600 * 1,700 mm Weight: approx. 3,200 kg Upon request, transport and loading can be arranged throughout Europe for an additional charge. Prices are plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 8086010539B, spindle motor power: 5,500 W, spindle speed (max.): 6,500 rpm, spindle bore: 46 mm, type of input current: three-phase, bar passage: 42 mm, bar diameter (max.): 42 mm, overall weight: 4,700 kg, DMG Gildemeister Sprint 42 linear CNC turning center with FANUC 160i control and IEMCA Boss 545-E bar feeder. The machine is a compact and productive CNC twin-spindle turning center for the series production of bar stock parts up to 42 mm in diameter. Thanks to its main spindle, counter-spindle, 6 linear axes, 2 channels, and powered tools, the machine is particularly suitable for precise turning, drilling, milling, and complete machining operations in medium to high volumes. The machine is available including the bar feeder and chip conveyor. On-site inspection is possible by arrangement. Machine data: Manufacturer: DMG / Gildemeister Italiana Model: Sprint 42 linear Machine No.: 8086010539B Year of manufacture: 2008 Control: FANUC 160i User interface: DMG SlimLine / TFT 15" Spindles / C-axes: 2 Number of axes: 6 Number of channels: 2 Max. bar diameter: 42 mm Main spindle max. speed: 6,500 rpm Counter spindle max. speed: 6,500 rpm Installed power: 40 kVA Operating voltage: 400 V / 50 Hz Base machine weight: approx. 4,700 kg Travel distances: X1: 65 mm Y1: 350 mm Z1: 120 mm X2: 265 mm Y2: 326 mm Z2: 320 mm Spindle data: Main spindle: Max. bar diameter: 42 mm Guide bushing bore: 46 mm Max. speed: 6,500 rpm Nominal power: 5.5 kW Nominal torque: 37.5 Nm Counter spindle: Guide bushing bore: 38 mm Max. speed: 6,500 rpm Lajdpfszkh Iujx Afksf Nominal power: 3.7 kW Nominal torque: 19.6 Nm Bar feeder: Manufacturer: IEMCA Model: Boss 545-E Type: 32 LL Year of manufacture: 2007 Serial No.: 020722GA10 Weight: approx. 860 kg Voltage: 400 V / 50 Hz Compressed air: 6 bar Weight: 860 kg Location: Bocholt Availability: immediately available Inspection: possible by arrangement Loading / Transport: for collection

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Maximum height 350 mm Lsdpevr Eh Ejfx Afkoaf Turning length 1000 mm Maximum turning diameter over bed 600 mm Maximum turning diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed rate range, longitudinal and transverse 0.5 – 5000 mm/min Rapid traverse rate, longitudinal and transverse 9 m/min Main drive 30 kW Machine dimensions with chip conveyor, L x W x H 5400 x 2200 x 2000 mm Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT screen General description: CNC manual data input control with program input via function and numeric keys. Input of all information in dialog with the screen. Integrated menu system and display of all functions in plain text. Control panel, screen and handwheel in a separate chip guard. The EPL control offers the following possibilities: Programs can be entered and modified with direct operator guidance via the EPL control without program-technical preparation. NC programs in ISO/EIA standard can be entered, output or entered manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, transverse and contour turning, also with allowance. Threads. Chamfer DIN 509 form E and F and DIN 76, also grinding allowance can be programmed. Axial and radial grooves according to DIN 471 and 472, also with bottom chamfer. Radii 90° and chamfers 45°. Automatic tool radius compensation for cycles, chamfer, groove, radius, chamfer. Programming: Sentence-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, subprogram technique, masking levels for program parts. Zero point offset. Selection of operating modes via menu. Program input and output: In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, of which 6 positions are standard tool holders + 6 positions are driven tool holders • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (more on request) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Lajdpfx Afszkgqzekef Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Axes / Travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. If you are interested or have questions about technical details, please do not hesitate to contact us.

Condition: good (used), Center height 260 mm Trestle holder MK 4 Quill stroke 100 mm This hydraulic tailstock comes from a GILDEMEISTER CT 40 CNC slant-bed lathe. Fig. similar Lsdpjralkmofx Afksaf Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: excellent (used), I have a GILDEMEISTER CTX600E V3 CNC lathe with powered tool drive for sale. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX600E V3 Control System: Heidenhain 3190 Country of origin: Germany Year of manufacture: 1998 The machine is fully equipped with fixed, powered tool holders, as well as many soft and hard jaws. Machine parameters: - Turret: 12 tools in VDI-50 holders (6 powered tool slots) - Max. speed: 3600 rpm - C-axis - Powered tools - Hydraulic tailstock - Tool measurement probe - Max. turning diameter, X-axis = 500mm - Max. turning length, Z-axis = 1000mm - Cooling system - Hydraulic 3-jaw chuck, 400mm - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 9 tons - Loading is included in the price Laodpfx Afjzu Df Rekof The machine has undergone a complete inspection. It is in 100% working order, connected, and ready for operation. Stal-Com has been involved in the sale, service, and training of CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers in Poland but also by customers from all over Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from our company, we provide training for the staff and can also set up production of parts at the customer's location. We cooperate with many companies on an ongoing basis, supplying them with new machine tools.

Condition: excellent (used), For sale: GILDEMEISTER CTX 410 V3 CNC LATHE with driven tools TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 tool holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Tailstock - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - Coolant system - Hydraulic collet chuck on the main spindle (can be replaced with 3-jaw chuck) - Main spindle with through-hole (bore diameter: 66 mm) - Finished parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5 tons Ledpfxjzu Dfqj Afkeaf - Loading included in the price The machine has undergone a complete inspection. Fully operational and ready to work—currently connected and available for demonstration. About the company: Stal-Com has been trading, servicing, and providing training on DMG Group CNC machines for over 20 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. Every machine undergoes a thorough technical inspection. We supply not only customers in Poland, but also across Europe and parts of Asia. Each machine can be inspected live in production, as we also provide subcontract machining services. After purchase, we provide operator training and can help set up production at the customer’s facility. We work with many clients under long-term partnerships, supplying additional machines as needed.

Condition: excellent (used), Year of construction: 2007, For sale: CNC LATHE GILDEMEISTER CTX 410 V6 with driven tools, Y-axis, sub-spindle TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V6 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2007 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 stations for VDI-30 tool holders (all stations driven) - Max spindle speed: 5000 rpm - C-axis on both spindles - Driven tools - Y-axis - Sub-spindle - Max turning diameter X-axis = 320mm - Max turning length Z-axis = 600mm - High-pressure coolant system - Hydraulic 3-jaw chuck 250mm on the main spindle - Hydraulic 3-jaw chuck 200mm on the sub-spindle Lodozu Dd Tepfx Afkjaf - Main spindle through-hole (bore diameter 77mm) - Parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 6 tons - Loading included in the price The machine has undergone a complete inspection. 100% operational. Connected and ready for operation. Stal-Com company has been dealing with the sale, service, and training on DMG group CNC machines for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers from Poland, but also from all over Europe and parts of Asia. Every machine can be inspected in operation, as we also provide CNC machining services. After purchasing a machine from us, we offer operator training as well as on-site production setup. We have long-term cooperation with many companies to whom we supply additional machine tools.

Condition: not inspected (used), Year of construction: 2001, operating hours: 31,782 h, functionality: unexamined, overall weight: 5,500 kg, Without tools Lajdjzbqg Njpfx Afksf

Condition: used, Year of construction: 1998, swing diameter max. over bed cover 570 mm swing diameter over face slide 420 mm control Heidenhain CNC PILOT longitudinal stroke 635 mm face stroke 220 spindle bore 79 mm centre distance 1000 mm chucking diameter 250 mm tailstock taper MT 4 feed speed longitudal 0,025-24.000 mm/min. feed speed face 0,025-20.000 mm/min. power feed longitudinal 7.000 N Feed Force Face 3.500 N total power requirement 44 Lodpfx Afszcfc Iokjaf weight of the machine ca. 5,7 t dimensions of the machine ca. 7,5 x 4,0 x 1,7 m Accessories: - 3 clamping jaws - various tool holders

Condition: ready for operation (used), Gildemeister 851.75.00-03.26 circuit board (570 127/137), used, normal signs of wear, 100% functional. Ledpfx Afji D U S Rskeaf