Used Gildemeister Gm 20 for sale (250)

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min sub spindle drive 9 kW max. torque on the spindle max. 72 Nm Cedpe Ah Eb Tofx Ap Dehd 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, 3 collets, chip conveyor, coolant with band filter device

Condition: good (used), functionality: fully functional, it is equipped with a 210 spindle, but can accommodate up to 250. It does NOT have motorized tools. Csde Ad R Rcjpfx Ap Dshd Heidenhain control system.

Condition: excellent (used), Year of construction: 2004, operating hours: 19,176 h, functionality: fully functional, machine/vehicle number: 2301-0160, Gildemeister Sprint 32 linear, serial number 2301-0160, year 2004. Cedpfx Ajzxntaop Dehd 2 x 4 = 8-axis configuration + rotary table + tool magazine. 8,000 RPM on both spindles. Operating hours: 19,176 / 15,274.

Condition: used, Year of construction: 2006, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, NC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Cjdj Aawrlepfx Ap Dohd Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Lathe completely overhauled, both electrically and mechanically, restored to like-new condition with repainting. Replacement of the electrical cabinet with a Siemens Series 1500 PLC. Overhead control panel. Replacement of cables and microswitches. Overhaul of the main motor. Replacement of the leaking lubrication oil pump. Replacement of the tool cooling pump. Check of the door closing system with an electromechanical system. Chsdpfx Apsd Hza Io Dod Pneumatic unit. Loader interface. End-of-bar position 1. Replacement of all bearings. Overhaul of carriages. Replacement of camshafts. Replacement of all lubrication distributors. Replacement of working and threading clutches. Pneumatic tailstock. Fixed and rotating front chucks. Diameter variation 20. CE certification with attached documents.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of manufacture: 2007 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm - HSK 63 - Measuring probe Chsdpfx Ajzhufhjp Djd - Blum laser tool measurement system - Coolant tank, 980 liters - Internal coolant system, 40 bar - Chip conveyor - Electronic handwheel - Operating mode 4 - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from a space technology institute. Excellent condition. Subject to errors and prior sale.

Condition: good (used), Year of construction: 1993, functionality: fully functional, travel distance X-axis: 212 mm, travel distance Z-axis: 640 mm, total height: 1,730 mm, total length: 4,530 mm, total width: 1,940 mm, overall weight: 5,200 kg, Gildemeister CTX 400, CNC turning machine. The machine is in good, well-maintained condition. Manual included. Machine with EPL2 programming. Codpfe Ad H Ukox Ap Dehd Travel distances: Z-axis = 640 mm X-axis = 212 mm Max. turning diameter over the bed: 500 mm Data: - Year of manufacture: 1993 - CNC control: EltroPilot L2 - 12 tool stations - Spindle power: 22 kW - Rapid traverse X-axis: 10 m/min - Rapid traverse Z-axis: 15 m/min - Speed range: 25 - 5000 rpm - Chip conveyor GB 25L 38L (discharge height 1100mm, belt width 225mm, feed height 250mm) - Double foot switch - Machine weight (with chip conveyor): approx. 5.15 tons - Dimensions with chip conveyor (W x D x H): 4.53 x 1.94 x 1.73 m The machine can be inspected at any time. The sale is only to business customers and is without guarantee or warranty. You will receive an invoice with the currently applicable VAT. The machine can be loaded.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 90,842 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 555 mm, total height: 1,950 mm, total width: 2,220 mm, overall weight: 6,500 kg, product length (max.): 4,770 mm, number of axes: 6, This 6-axis Gildemeister MF twin 65 turn-mill centre was manufactured in 2001. It features a swing diameter of 240 mm and a normal turning diameter of 200 mm. The machine offers a spindle distance of 800 mm and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister MF twin 65 turn-mill centre we have for sale. Contact us for further details. TECHNICAL SPECS:- Bed Design: 45° slant bed, roller guide ways- Swing Diameter: 240 mm- Normal Turning Diameter: 200 mm- Spindle Distance: 800 mm- Slide 1 X/Z Travel (Cross/Longitudinal): 190 / 555 mm- Slide 2 X/Z Travel (Cross/Longitudinal): 190 / 555 mm- Slide 1 Y-Axis Travel : 40 mm- Spindle 2 Longitudinal Travel: 600 mm- Main Spindle 1 (Left): - Chuck Diameter: 200 mm - Max Bar Capacity: 65 mm - Spindle Head Flat Flange: 170 h5 - Spindle Bore: 79 mm - Draw Tube Inner Diameter: 66 mm - Front Bearing Diameter: 120 mm - Drive Power (40/100% ED): 28 / 21 kW - Speed Range: 25 - 5000 rpm (min⁻¹) - Knee Speed: 850 rpm (min⁻¹) - Max Torque (40/100% ED): 320 / 240 Nm - Drive Type: AC / 1 (ISM) - C-Axis Rapid Traverse: 250 rpm (min⁻¹) - C-Axis Holding Torque: 200 Nm - C-Axis Indexing Accuracy: 0.025°- Counter Spindle / Main Spindle 2 (Right): - Chuck Diameter: 200 mm - Max Bar Capacity: 42 mm - Spindle Head Flat Flange: 140 h5 - Spindle Bore: 56 mm - Draw Tube Inner Diameter: 44 mm - Front Bearing Diameter: 90 mm - Drive Power (40/100% ED): 18 / 14 kW - Speed Range: 31 - 6300 rpm (min⁻¹) - Knee Speed: 1000 rpm (min⁻¹) - Max Torque (40/100% ED): 130 / 173 Nm - Drive Type: AC / 1 (ISM) - C-Axis Rapid Traverse: 250 rpm (min⁻¹) - C-Axis Holding Torque: 120 Nm - C-Axis Indexing Accuracy: 0.025°- Slide 1 (Upper): - Rapid Traverse X/Z: 20 / 30 m/min (without Y-axis) or 20 / 7.5 / 30 m/min (X/Y/Z with Y-axis) - Feed Force X/Z: 4 / 7 kN - Path Resolution: 0.001 mm - Ball Screw Pitch x Diameter: 12x28 / 15x32 mm (without Y) or 12x28 / 5x32 / 15x32 mm (with Y)- Slide 2 (Lower): - Rapid Traverse X/Z: 20 / 30 m/min - Feed Force X/Z: 4 / 7 daN (kN) - Path Resolution: 0.001 mm - Ball Screw Pitch x Diameter: 12x28 / 15x32 mm- Slide 3 (Spindle 2 Z-Movement): - Rapid Traverse A: 30 m/min - Feed Force A: 7 kN - Path Resolution A: 0.001 mm - Ball Screw Pitch x Diameter: 15x32 mm- Tool Turrets (Upper and Lower): - Number of Tool Stations: 2 x 12 - Tool Shank Diameter (DIN 69880 / VDI): 30 mm - Driven Tool Stations: 2 x 12 - Driven Tool Power (40/100% ED): 5 kW - Driven Tool Max Torque (40/100% ED): 16 Nm - Driven Tool Speed Range: 40 - 4000 rpm (min⁻¹)- Electrical Data: - Voltage: 400 V (3-phase, 50 Hz) - Connected Load: 65 kVA - Rated Current: 95 A - Back-up Fuse: 100 A - Auxiliary Voltages: 230 V / 24 V=- Hydraulics System: - Tank Capacity: approx. 25 L - Pump Power: 2.2 kW - Max System Pressure: 80 bar - Clamping Device Pressure: 80 bar- Coolant System & Filtration: - Tank Capacity: 200 L - Pump Power: 1.65 kW - Delivery Volume at 6 bar: 50 L/min - Equipped with band/paper filtration unit- Machine Dimensions & Weight: - Total Length (with Chip Conveyor): 4770 mm - Total Depth (with Electrical Cabinet): 2220 mm - Total Height (with Electrical Cabinet): 1950 mm Technical Specification Counter Spindle Yes Driven Tools Yes Chjdpfxs Agvbqe Ap Djd

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 310 V3 with driven tools, C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control: HEIDENHAIN 4290 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 1999 _ Machine parameters: - head: 12 - tools for VDI 30 holders (Every second socket driven) - max. rpm 6300/min. - max. turning length in the Z axis: 455 mm - max. turning diameter in the X axis: 200 mm - C axis - driven tools - holder on the main spindle: Fi-200mm - max. shaft diameter Fi-51 mm - finished part collector - cooling system - chip conveyor - spindle drive power: 11 KW - DTR - machine weight: 3.2 tons _ WHY IS IT WORTH BUYING MACHINES in PPM? - we have our own service _ stationary and mobile Chjdpovmy Icefx Ap Djd - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing.

Condition: used, Year of construction: 2008, turning diameter 246 mm turning length 445 mm control Siemens 840D spindle speed 6.000 U/min rapid traverse Z-axis 30 m/min Chedjz St N Espfx Ap Djd rapid traverse X-axis 24 m/min tailstock travel 450 mm max. weight between the centers 110 kg total power requirement 24 kVA weight of the machine ca. 3,95 t dimensions of the machine ca. 3,05 x 1,65 x 1,75 m CTX 310: - Powered tools with C-axis - Tailstock Working area: - Machine bed length: 1,625 mm - Center height: 365 mm Tailstock: - Max. tailstock force: 400 daN Tool holders: - Number of tools: 12 - Tool holder: VDI 30

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Controlled by Siemens Year of manufacture: 2011 Travel in X: 300 mm Travel in Z: 1050 mm Spindle bore: 103 mm Speed range: 20 – 3250 rpm Including the following accessories: Sliding guard 12-position turret with 6 driven tool stations Tool measurement in the working area 3-jaw chuck, hydraulic, SMW Autoblock 0, 315 mm Foot switch for chuck, foot switch for tailstock Various tool holders VDI 40 Chsdpfx Aozd Dczjp Ded Various sets of top jaws Various turning tools Signal lamp, 4-color Tailstock with quill Chip conveyor with coolant tank 4 machine feet Operating manuals

Year of construction: 1997, condition: used, X-axis travel: 220mm, Z-axis travel: 635mm, swing diameter over bedway cover: 570mm, swing diameter over cross-slide cover: 420mm, main spindle nose diameter: 170mm h5, main spindle diameter at front bearing: 120mm, main spindle bore: 79mm, drive power at 100% duty cycle: 21kW, max. torque: 240Nm, spindle speed range: 25-5,000rpm, C-axis speed: 100rpm, holding torque: 200Nm, counter spindle nose diameter: 120mm h5, counter spindle diameter at front bearing: 90mm, spindle bore: 56mm, chuck diameter: 140mm, drive power at 100% duty cycle: 9kW, max. torque: 72Nm, spindle speed range: 25-5,000rpm, travel: 575mm, rapid traverse speed: 24m/min, Z-axis feed force: 7kN, X-axis feed force: 3.5kN, X-axis rapid traverse speed: 20m/min, Z-axis rapid traverse speed: 24m/min, X/Z ball screw dimensions: 32x10mm, length: 3565mm, width: 1700mm, height: 1700mm, weight: 4.7t, operating hours: 79,630h, the machine is currently not operational due to damage to the tool turret, an on-site inspection is possible. Chjdpfxe Agwqts Ap Dsd

Condition: used, Multispindle lathe GILDEMEISTER AS 32 Csdps Afz Smjfx Ap Djhd

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Csdpfjxrg S Isx Ap Dohd Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock : Tailstock travel: 1150mm

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 8038938456C, turning length: 450 mm, turning diameter over cross slide: 505 mm, turning diameter: 202 mm, spindle motor power: 10,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, Gildemeister CTX 310 Heidenhain Turn+ The machine its full functional, but have some miner isue. Chsdpfowk E Uzjx Ap Ded

Condition: used, Year of construction: 2007, turning diameter 200 mm Chjdpszzfbysfx Ap Djd turning length 393 mm control Siemens 810D weight of the machine ca. 3200 kg

Condition: defective spare-parts repository (used), Year of construction: 2003, machine/vehicle number: 07400001041, Sales location: Landgrafenstraße 45, 41069 Mönchengladbach TWIN 102 Year of manufacture: 2003 Siemens 840 D Powerline Main spindle 33 KW, 3200 1/min Counter spindle 21 KW Travel distances: Saddle 1 X-axis 300 mm Y-axis 80 mm Z-axis 600 mm Turret, 12 positions, VDI 30, 12 driven Saddle 2 X-axis 180 mm Z-axis 650 mm Turret, 12 positions, VDI 30, 12 driven Saddle 3 X-axis 175 mm Z-axis 670 mm Tailstock Known faults: Cedozn H D Aepfx Ap Djhd Z3-axis defective

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V5 With driven tools , 2 x C axis + capture. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V5 Control: HEIDENHAIN 3190 + TURN PLUS overlay Country of manufacture: Germany Manufacture date: 1999 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( all sockets driven ) - max rpm 5000/min. - max length of turning in Z axis: 570 mm - max diameter of turning in X axis: 300 mm - 2 x C axis - driven tools - capture spindle - chuck on main spindle E185 - handle on capture spindle E173 - max. shaft diameter Fi-65 mm - receiver of finished workpiece - tool measuring probe - cooling system - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.7 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. Chodou Aardopfx Ap Dsd _ www_ppmsc_en _

Condition: excellent (used), Year of construction: 1995, Equipment: documentation/manual, FOR SALE: CNC LATHE GILDEMEISTER CTX400 TECHNICAL AND VISUAL CONDITION: Very good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX400 Control: Heidenhain 1190 Country of origin: Germany Year of manufacture: 1995 Machine specifications: - Turret: 12 tool stations, VDI-30 tool holders - Max. spindle speed: 5000 rpm - Hydraulic tailstock - Parts catcher - Max. turning diameter X-axis: 290 mm - Max. turning length Z-axis: 600 mm - Coolant system - Three-jaw hydraulic chuck 200 mm - Spindle bore: 66 mm - Through-spindle - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5.5 tons - Loading onto truck included in the price Chedey Rbr Nepfx Ap Ded The machine has undergone a full technical inspection. 100% operational. Connected and ready for work. Stal-Com has been selling, servicing, and providing training on CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. All machines undergo a thorough technical inspection. Besides Polish customers, our machines are purchased by clients throughout Europe and parts of Asia. Each machine can be inspected under power during production, as we also provide machining services. After purchasing a machine from us, we offer operator training and can help set up part production at the customer's site. We work with numerous companies on a long-term basis, supplying them with further machine tools.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 680 mm, turning diameter: 465 mm, spindle speed (max.): 3,500 rpm, spindle bore: 76 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 3,500 rpm, type of input current: three-phase, total height: 2,120 mm, total length: 4,865 mm, total width: 1,770 mm, spindle nose: FL 220 h5, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, The Gildemeister CTX 510 is a rather heavy, industrial CNC turning machine. It is a machine that is particularly interesting if you want to machine a lot of material and are not just doing light turning operations. We acquired this machine in working condition from the first owner and it can also be inspected in working condition! Additional options & accessories: - Full pallet with static VDI-40 tool holders. - Chip conveyor - Marposs measuring arm - Collet chuck 173E (Quadro NC - Marquar) - Adapter sleeve for 185E collet chuck - Coolant gun - High-pressure coolant pump - Chip conveyor - Double foot pedal - Original Gildemeister documentation. Weight & dimensions: 7,500 kg Chsdpezyai Nofx Ap Ded 4865 x 1770 x 2120 mm (L x W x H incl. chip conveyor)

Condition: good (used), Year of construction: 2002, machine/vehicle number: 04780000061, spindle motor power: 45 W, travel distance X-axis: 605 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,470 mm, overall weight: 22,000 kg, Gildemeister TWIN500 Siemens 840 D Main spindle: 45 kW, 3200 rpm, swing: 610 mm, spindle distance: 1850 mm Counter spindle: 45 kW, 320 rpm Travel ranges: X-axis: 605 mm Y-axis: 210 mm B-axis: 240° Z-axis: 1470 mm Chsdpfxszymvio Ap Dsd Turning/milling spindle: HSK 63, 12000 rpm X-axis: 267 mm Z-axis: 1440 mm Tool magazine: 80 positions Machine Condition : Functional, good.

Condition: used, CNC lathe GILDEMEISTER SPRINT 42 Linear Chodpfx Asz I Uutsp Djd

Condition: used, Year of construction: 2011, Technical details: Codpfx Ajyz Sdqjp Dohd weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: good (used), Year of construction: 2007, operating hours: 49,000 h, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales. Cjdpfjxdih Nox Ap Dshd

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, CNC universal lathe GILDEMEISTER NEF 600 V 3 With Siemens 840 D control system Year of manufacture: 2009 Swing over bed: 600 mm Swing over cross slide: 410 mm Spindle bore: 90 mm Travel in X-axis: 320 mm Travel in Z-axis: 1250 mm Maximum spindle speed: 3000 rpm Including the following accessories: Sliding guard with internal lighting 12-station turret VDI 40 with 6 driven stations Various VDI 40 tool holders Tailstock with quill Collet chuck Hainbuch with 2 collets Chjdpfx Aj Aa Ag Uep Dsd Foot switch for collet adjustment Coolant spray gun Coolant system Chip tray Operating manuals