Used Genome Sequencer for sale (342)

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm Hodpexp Rywefx Ag Uong z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic guillotine shears SMO-3106-N Cybelec CybTouch 8 Specifications - Maximum cutting thickness (S235): up to 6.0 mm - Maximum cutting length: 3200 mm - Blade inclination angle: 1.5° - Strokes per minute: 14 - Backgauge travel distance: 600 mm - Motor power output: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Weight: 5200.0 kg Equipment and features - Backgauge equipped with ball screws and driven by the electric motor - Hydraulic hold-downs to clamp the sheet over the entire cut length. - Blade clearance adjustment - Ball transfer units on the worktable - Work lighting - Front supports - Mobile foot switch Rear chute The rear chute is equipped with ball transfer units to slide smoothly away from the shear after cutting. CybTouch 8w control (Mounted on a swivel arm on the left-hand side of the machine.) - Parameter setting based on material specifications - Automatic clearance setting - Automatic correction for backgauge positioning - Backgauge retract movement to avoid bending of material - Supports that cover ⅔ of the standard size material - Support for RTS - the handover of the cut material to the user - Support for the motorized backgauge - Docking position - Hold-down pressure on sheet management - Hydraulic pressure management - Saving long cut sequences and programming in live colors - Clear page layout with large buttons on the easy-to-read screen that displays all the data an operator needs. - Very intuitive and operator-friendly user-interface - Few-second programming a part sequence - Assistance by a specialist Hnsdpfx Aevhclmeg Ueg We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials The remaining time can be checked in the Otinus Customer Panel.

Condition: new, functionality: fully functional, total length: 1,200 mm, total height: 2,100 mm, total width: 2,500 mm, empty load weight: 750 kg, input voltage: 400 V, water tank capacity: 400 l, warranty duration: 12 months, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS This set of devices allows for maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of the DPF DUO Premium: -> A separate dryer doubles work efficiency -> We are the only ones to offer a large-diameter hose that connects to the DPF. A larger diameter = more water = more effective cleaning -> Our filter mounting system is free of elements placed inside the DPF filter tube that could block the water flow. This allows the full performance of the water and air pump to be utilized, shortening regeneration time. -> The large cabin provides the freedom to mount the cleaned filter. The operator, based on their experience, can choose the position in which the filter will be washed. -> Protection against excessive pressure in the filter during cleaning -> Protection against lack of airflow through the filter during drying -> Possibility to individually set the cleaning program according to the filter capacity -> Stable securing of the filter during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Training at the customer's site can be provided The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting the filter structure, restoring up to 99% of the nominal flow rate. Our technicians have dedicated significant effort to ensure that both the cleaning procedures and the detergents used are safe for the environment and machine operators. Hsdjxm Szqepfx Ag Uong The operator checks the filter for mechanical damage using an endoscopic camera. If signs of melting, ceramic core cracks, or other apparent mechanical damage interfering with the DPF are detected, regeneration will not be possible. The regeneration process takes place in a closed chamber equipped with filters preventing harmful contaminants from escaping into the environment. Water with cleaning fluid circulates in a closed loop and is filtered throughout the process, significantly extending bath life. The DPF DUO Premium cleans filters using water, chemistry, and air. A precisely selected, computer-controlled sequence of water and detergent dosing, combined with air and impulses generated by compressed air, ensures high regeneration efficiency. After the cleaning process is complete, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be taken before cleaning, allowing subsequent comparison of backpressure values before and after the process. The device is equipped with a printer that allows generating a measurement report. The washing time for filters from passenger cars or light commercial vehicles is 20–40 minutes, which enables regeneration of up to a dozen filters in 8 hours. High efficiency combined with low operating costs guarantees a rapid return on investment.

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW Hnjdpfjxabi Rsx Ag Usg weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Year of construction: 2025, condition: new, functionality: fully functional, Dishwasher Model: R-Line 1500 with base Quick-ready system Euronorm 500 2.4 liters of fresh water consumption 7 washing programs with 3 easy Rinse aid and detergent dosing pump extra deep interior for sheets / tubs 600 x 400 mm DGUV V3 checked Sequence / drain pump Connection: 400 V, 7.7 kW, 16A-CEE plug Dimensions: 600 x 700 x 1128 mm, WxDxH with warranty Included accessories: 1 plate basket Hnodpsfffhxofx Ag Usg 1 universal basket 1 cutlery basket Inlet and outlet hoses

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Hjdpfevzr Nbsx Ag Ujng Sequencing / sequencing analysis Gene expression analysis genotyping proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Samples per run: 1-12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening Hedpfx Agodx R Dme Ueng • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: new, functionality: fully functional, IG 482 SD Specifications Motors Grinding Spindle Motor 50HP, 200 - 1180RPM Rotary Table Motor 3HP, 5 - 70RPM Servo Column Motor 5KW Coolant Pump 3/4HP, 45GPM Table Diameter 48" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Contact a DCM Technical Specialist for custom table & fixturing options Capacity Max Swing Diameter 52" Max Part Height 12" with grinding segments retracted 10-1/2" with a 2A2T wheel Grinding Wheel Options 2A2T Suberabrasive or Conventional Segments Hodpjubbqijfx Ag Ujng 26" diameter Cortland Style Hub & Segment 26" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM Servo drive X-axis for precision positioning Electrical Requirements 460V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 137" wide, 82" deep, 88" high Weight Machine & Swarf System: 14,500lbs. (estimated) Electrical Box: 1,500lbs. (estimated) IG 482 SD FEATURES • 48” variable speed electromagnetic chuck with auto demag cycle • 50HP grinding spindle motor • Integral coolant filtration & mist collection systems • Easy to operate touchscreen controls • Mitsubishi FX5U PLC • 3 Grinding Modes - Conventional, Incremental and Grind to Height • Regrind feature allows re-running previous grind sequence without reprogramming • Continuous grind – the machine can automatically cycle through grind 1, 2 & 3 • Servo-driven precision control of both Z and X-axis with absolute home positioning • The cross slide X-axis moves with manual pulse generator • Backlash compensation on both axes • Password protection & operator lockout features • SECS/GEM Interfaced to work with 3rd party Scada type software • Password protection and operator lock-out features • Automatic routine maintenance reminders • 120" x 82" Footprint

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Hnodpsxgrfpsfx Ag Ujg Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol Hnjdpjvakdzsfx Ag Ujg

Condition: refurbished (used), Diosna W 240 AFT wendel mixer with 2 bowls 240kg dough 2 speed frequency controlled original Diosna digital control panel temperature measurement scraper shorter kneading time fast dough sequence lower dough heating Hnedjwhxkqspfx Ag Ueg suitable for all types of dough, thanks to the gentle kneading capacity in flour 150kg bowl contents 370 liter

Condition: new, Year of construction: 2025, High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1 Rigid S355 steel frame Workbench structure and Ram manufactured from laminated S355 steel Symetric renforced Throats Heavy grey cast iron slydways with automatic lubrication system CNC Controller CYBELEC VisiPac 8 axis + 1 Bosch Rexroth servo valves Inovance servo drive systems DIEMA high resolution glass scales for high bending precision Hodpfx Agowd I Svo Ueng Bending force 700T Bending lenght 6500 mm Distance between columns 5100 mm Depth throat 420 mm Ram stroke 400 mm Closing Ram approach speed limited to 30 mm/s for human operation Closing Ram working speed 7 mm/s Return-speed 40 mm/s Main hydraulic motor 45 kW Machine weight 62,000 kg 8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast 3D graphical profile drawing (Touch Profile) and precise 2D program creation The opening value can be setted individually in each sequence Machine can be inferfaced with different CAM software Easy single bends with the EasyBend page Correction menu Many languages available Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded 4 Axis Back gauge adopts linear guides and Ballscrews Back gauge travel X axis 1000 mm 2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2) Automatic height adjustment (Axis R) 2 CNC Bending Followers 400 kg up to 60° angle Motorised displacement of bending followers and parking area on the right of the bending table Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system. Safety Equipment : 3-position Foot switch with Emergency Stop Position Closing approaching speed limited to 30 mm/s for human operation Laser safety protection and permanent speed monitoring Closing bending (working) speed 7 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit category IV Standard configuration and equipment : Electric control cabinet on left side CNC user interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 200 mm 1 Line of centred lower Dies (to be defined) Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE Customisation available CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard Operation manual in English, German and French language Delivery and Services available worldwide Customized Quotation GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force Hedpsdx R Dtjfx Ag Usng • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: good (used), Automatic perforator Kugler 340-2R Device in very good condition. Includes perforation tool 3:1 round hole and additional tools. Hnedpfjwt Stvsx Ag Ujg Manufacturer description: Perforation device with a working width of up to 340 mm Device adapted for continuous operation and high loads Unique „Two-finger” system ensures excellent reception of sheets of various grammages Two-shelf feeder enabling continuous operation After perforation, sheets rotate around a special drum, thanks to which the correct sequence of pages is maintained at the receiving station Possibility of using two-part strips enabling perforation of both books and calendars Perforation up to 3 mm in one cycle Quick and easy replacement of perforation strips Possibility of using strips with / without a recess for the hanger. There is a shaker on the delivery. Maximum working width. 340 mm Format / Dimensions min. 120x105mm Format / Dimensions max. 340x340mm Maximum cutting thickness. 3mm Mechanical cycles per minute 80-100 cycles Power supply 380V Weight 1580kg

Condition: new, Year of construction: 2017, functionality: fully functional, Item number: 470722 Serial number: 470722-5 Material: Aluminum Total weight: 27 kg Dimensions Hnsdpfx Asu Raqpjg Uog Base plate: 460mmx300mmx25mm Upper guide plate: 300mmx300mmx22mm Overall height: 105mm Travel: 130mm Total length: 680mm The Tünkers LE100-150 VRL SB T02-4 is a pneumatic linear unit designed for precise and repeatable linear movements in industrial applications. With a pneumatic drive, it is ideal for automated production processes in which exact positioning and stable sequences are required. The robust design ensures a long service life and low maintenance requirements, even under intensive use and demanding conditions. The unit can be flexibly installed both horizontally and vertically, which increases its adaptability to different areas of application. In addition, it is possible to integrate sensors and control components to monitor and control the movement even more precisely. This makes it a versatile and reliable solution for industrial applications where high precision and durability are required.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. Hnjdpovmwxxofx Ag Uog All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Condition: new, Year of construction: 2025, The 3E Machinery lithium battery recycling system is an advanced, fully integrated technological solution designed for the safe, efficient, and environmentally responsible processing of spent lithium batteries and electrode materials. This line combines state-of-the-art crushing, separation, thermal treatment, and industrial automation technologies, enabling the recovery of valuable raw materials while adhering to the highest safety standards. Comprehensive Resource Recovery Technology The recycling process is based on a sequence of physical and thermal operations, including: • Multi-stage crushing • Gravity and air separation • Precision screening • Drying and low-temperature pyrolysis • Exhaust gas purification • Central dust collection and fully sealed material conveying Depending on the selected process configuration, the system allows recovery of key fractions such as copper, aluminum, separator film, black mass, electrolyte, and additional components. Key System Features 1. Safe and Controlled Crushing • Specialized, patented shredders and crushers engineered for lithium batteries • Capable of processing charged batteries through gas protection technology and multi-level fire prevention systems • Three-stage crushing ensures optimal material liberation 2. High-Efficiency Material Separation • Air separation system with up to 99% efficiency for light and heavy material separation • Combined static and dynamic screening for optimal black mass recovery Hnedpfx Agsxz Dd He Usg • Precise gravity separation for copper and aluminum granules 3. Thermal Processing – Drying and Pyrolysis • Drying at 100–150°C with the option of condensing and recovering electrolyte; separator films remain intact for further processing • Low-temperature pyrolysis at 450–600°C effectively removes organic matter and enhances black mass quality • Advanced exhaust treatment with catalytic oxidation, alkaline scrubbing, and activated carbon filtration to meet emission standards 4. Full Automation and Operational Safety • Central control system based on Siemens PLC, compatible with MODBUS TCP/IP, PROFINET, and OPC • Modular design for flexibility, ease of maintenance, and scalable system configuration • Fully enclosed conveying and central dust removal ensure a clean and safe working environment System Capacity and Technical Scope • Processing capacity: 500 to 20,000 tons per year • Installed power: 150–1280 kW Applications: • Spent EV and industrial batteries • Consumer lithium-ion batteries (3C) • Positive and negative electrode sheets • Modules, cells, and production scrap Layout: custom-designed to fit client facility requirements Optional Extensions: 3E Machinery also offers complementary systems, including: • Battery pack dismantling lines • Separator film cleaning and recycling lines • Black mass refining and purification systems • Aluminum and steel component recycling solutions Why Choose 3E Machinery Technology? • Over 20 years of expertise in recycling technologies • Proprietary patented equipment, including lithium battery crushers and shredders • High automation level and advanced process safety • Global references with numerous installations in Europe and Asia • Comprehensive support from design through commissioning to after-sales service.

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm Hedpfxjtndpzj Ag Ueng min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Year of construction: 2022, condition: ready for operation (used), This Metallkraft GBP 31175 press brake was manufactured in 2022. It features a CNC-controlled DELEM DA-58T controller for precise bending sequence calculations and programming. The machine boasts a pressing force of 175 tons and a bending speed of 10 mm/s, with a motor power of 18.5 kW. It includes Italian-made tooling and Fiessler safety lasers for enhanced operation safety. Contact us for more information about this machine. Application Types Bending Hnsdpfox D Rphex Ag Uog

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, cutting height (max.): 150 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage - Digital miter fence Digit L Hsdpjxuqulsfx Ag Ujng - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143983 Serial number: 143983 Hjdpsvzxg Tsfx Ag Ueng The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Its stable construction ensures consistently reliable performance, even in the most demanding applications.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Edger, trimming saw, multi-blade saw MADREW DCKWW 300/15 Year of manufacture: 2014 Machine is fully operational and in very good technical condition. TECHNICAL DATA: Saw spindle motor power: 15 kW Stepless feed speed adjustment: 6.0 ÷ 35 m/min Saw spacing with spacers (Board Width): 20 ÷ 300 mm Max number of saw blades: 4 Applicable saw blade diameters: Ø 250 ÷ Ø 400 mm Hnsdpfx Aex A Sfnsg Uog Maximum cutting height: 120 mm Minimum board length: 1000 mm The machine is equipped with interlock and safety systems, ensuring safe and reliable operation: - Phase sequence and phase loss indicator - Overload indicator for the machine due to blunt blades or excessive feed rate

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height -- mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Fully automatic band saws with two-column guide for series cuts in particular materials that are difficult to machine and solid material. With this machine, MEP offers you a machine that is technically on the highest level and by using the highest quality materials one is not has an unbeatable, robust and torsion-resistant structure. An extreme Robust saw bow made of gray cast iron ensures the necessary stability impressive cutting results and the strong cast iron columns which the saw arch slides by means of pre-stressed linear guides take care of themselves at maximum load for the highest cutting precision. The modern Machine control (MEP NC 5.0) offers the user maximum ease of use and ensures trouble-free operation. (Check/evaluation/correction in real time) HIGHEST PERFORMANCE > The 2 operating modes (semi-automatic and automatic) make this possible efficient cutting in all conditions. > The control allows up to 100 cutting programs with each different quantities and lengths and minimizes the Programming time for frequently executed jobs. > The automatically detected start position of the saw head reduces the setting time. > The feed of the saw head via driven hydraulic cylinders Linear guides with preloaded recirculating ball bearings ensures the Reduction of mechanical vibrations during cutting and higher Stability. > The automatic alignment of the front saw blade guide head depends on the dimensions of the bars to be cut reduces the processing time. > The saw blade is tensioned by the brushless motor and is constantly controlled and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system with 600 mm stroke is repeatable and cuts all lengths. > The vertical pair of rollers allows any type of bar or bundle that to be fed, to hold and to align. > The vector converter for stepless adjustment of the blade speed from 15 to 100 m/min allows cutting of any material. > The motorized chip conveyor can be positioned to the right or left of the cutting area to be assembled. CHARACTERISTICS: Fully automatic control - NC 5.0 -Innovative (Windows CE based) touch screen control with additional software Touch buttons for common operating functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via an in cylinder mounted servo valve, constant monitoring of the preselected torque 4 and with precise feed adjustment in millimeters/minute 5 Hodslf Tu Uopfx Ag Ueng -Setting / pre-selection of the stepless belt speed in m/min. -Saw band tension with band tension control and indication on the display by means electronic converter -Automatic detection of the beginning of the cut -Large 7" color touch screen to display and select all Machine functions and parameters and programming in a matter of seconds. Advertisement detailed alarm and error messages -Numerous special functions including different lengths + quantities (10 Run programs) as a sequence, clean cut, step execution and much more. -Stable, torsion-resistant and low-vibration cast steel saw frame -Carbide band guides for maximum cutting precision, hinged for easy saw blade change -Largely dimensioned deflection pulleys, adjustable, made of cast steel integrated belt circulation contro...

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps Hnodpfxjxqxw Te Ag Uog TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: good (used), functionality: fully functional, Technical details: SEW motor Type: DV132H8/4BH/HF/TH rpm: 700/1450 IP:54 Hz: 50 400V AC Brake: 400V Hjdpfowu Dbbjx Ag Usng kg: 83.94 The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor stands out due to its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows flexible and accurate control of movement sequences, making it particularly suitable for use in manufacturing and assembly applications.